Swsusp, resume and kernel versions
Pavel,
First of all I must say that swsusp has progressed alot and now works very reliably, at least for my configuration, and I use it a lot. Great job!
But I think there is one pretty severe issue present - even if swsusp is not enabled kernel should check if there is an image in swap and erase it. Today I has somewhat unpleasant experience - after suspending I accidentially loaded a vendor kernel. I was in hurry and decided that resume just failed for some reason so I did couple of things and left the box running. In the evening I realized that I am running vendor kernel and decided to reboot into my devel. version. What I did not expect is for the kernel to find a valid suspend image and restore it. As you might imagine messed up my disk somewhat.
Any chance this can be done?
Signature · 1 line
Dmitry
Hi Dmitry.
Quoted 16 lines · Dmitry Torokhov
Pavel,
First of all I must say that swsusp has progressed alot and now works very reliably, at least for my configuration, and I use it a lot. Great job!
But I think there is one pretty severe issue present - even if swsusp is not enabled kernel should check if there is an image in swap and erase it. Today I has somewhat unpleasant experience - after suspending I accidentially loaded a vendor kernel. I was in hurry and decided that resume just failed for some reason so I did couple of things and left the box running. In the evening I realized that I am running vendor kernel and decided to reboot into my devel. version. What I did not expect is for the kernel to find a valid suspend image and restore it. As you might imagine messed up my disk somewhat.
Quoted 1 line
Any chance this can be done?
One of my suspend2 users had the same thing yesterday. Unfortunately there's no easy way for us to detect that another kernel has been booted. The simplest solution we've found is to add commands in your init scripts to mkswap the place where your image is stored when rebooting. This will stop both of the implementations seeing the image and resuming at a later time.
Regards,
Nigel
Signature · 5 lines
Nigel Cunningham Software Engineer, Canberra, Australia http://www.cyclades.com Ph: +61 (2) 6292 8028 Mob: +61 (417) 100 574
Hi Nigel,
Quoted 19 lines · Nigel Cunningham
Hi Dmitry.
Quoted 16 lines · Dmitry Torokhov
Pavel,
First of all I must say that swsusp has progressed alot and now works very reliably, at least for my configuration, and I use it a lot. Great job!
But I think there is one pretty severe issue present - even if swsusp is not enabled kernel should check if there is an image in swap and erase it. Today I has somewhat unpleasant experience - after suspending I accidentially loaded a vendor kernel. I was in hurry and decided that resume just failed for some reason so I did couple of things and left the box running. In the evening I realized that I am running vendor kernel and decided to reboot into my devel. version. What I did not expect is for the kernel to find a valid suspend image and restore it. As you might imagine messed up my disk somewhat.
Quoted 5 lines
Quoted 1 line
Any chance this can be done?
One of my suspend2 users had the same thing yesterday. Unfortunately there's no easy way for us to detect that another kernel has been booted.
What do you mean? I thought it already compares signatures of the booting kernel and suspend image. Just wipe it out if it does not match, or, even better, just stop if signature does not match unless one boots with "nosuspend". This way even if I start booting wrong image I have a chance to select right one and avoid fsck.
Signature · 1 line
Dmitry
Hi.
Quoted 18 lines · Dmitry Torokhov
Quoted 11 lines · Nigel Cunningham
Quoted 10 lines · Dmitry Torokhov
But I think there is one pretty severe issue present - even if swsusp is not enabled kernel should check if there is an image in swap and erase it. Today I has somewhat unpleasant experience - after suspending I accidentially loaded a vendor kernel. I was in hurry and decided that resume just failed for some reason so I did couple of things and left the box running. In the evening I realized that I am running vendor kernel and decided to reboot into my devel. version. What I did not expect is for the kernel to find a valid suspend image and restore it. As you might imagine messed up my disk somewhat.
Quoted 5 lines
Quoted 1 line
Any chance this can be done?
One of my suspend2 users had the same thing yesterday. Unfortunately there's no easy way for us to detect that another kernel has been booted.
Quoted 5 lines
What do you mean? I thought it already compares signatures of the booting kernel and suspend image. Just wipe it out if it does not match, or, even better, just stop if signature does not match unless one boots with "nosuspend". This way even if I start booting wrong image I have a chance to select right one and avoid fsck.
That would work if the alternate kernel is suspend-enabled. Suspend2 handles that case nicely and I'm sure swsusp will handle it as well (although exactly what it does, I'm not sure. It used to panic IIRC).
If the mistakenly booted kernel isn't suspend enabled, however, you need a more generic method of removing the image, such as mkswapping the storage device. This is what I was speaking of.
Regards,
Nigel
Signature · 5 lines
Nigel Cunningham Software Engineer, Canberra, Australia http://www.cyclades.com Ph: +61 (2) 6292 8028 Mob: +61 (417) 100 574
Quoted 3 lines · Nigel Cunningham
If the mistakenly booted kernel isn't suspend enabled, however, you need a more generic method of removing the image, such as mkswapping the storage device. This is what I was speaking of.
The following code is used in the SUSE bootscripts to do exactly this:
----------------------------------------------------get_swap_id() {
local line;
fdisk -l | while read line; do
case "$line" in
/*Linux\ [sS]wap*) echo "${line%% *}"
esac
done
}
check_swap_sig () {
local part="$(get_swap_id)"
local where what type rest p c
while read where what type rest ; do
test "$type" = "swap" || continue
c=continue
for p in $part ; do
test "$p" = "$where" && c=true
done
$c
case "$(dd if=$where bs=1 count=6 skip=4086 2>/dev/null)" in S1SUSP|S2SUSP) mkswap $where
esac
done < /etc/fstab
}
---------------------------------------------------------------------
This invalidates the suspend signature if the kernel has not already done it. It probably does not cover the softwaresuspend2 signature but that should be trivial to add.
Regards,
Stefan
Hi Stefan.
For Suspend2, we also put a device id in the space, so there's only room for one character, which is a lower or upper case Z. (We also validate the device ID, so a random Z won't cause an oops).
Thanks for the code. With your/Suse's permission, I'll ask Bernard (cc'd) to include the script in the docs somewhere with the appropriate credit.
Thanks and regards,
Nigel
Quoted 42 lines · Stefan Seyfried
Quoted 3 lines · Nigel Cunningham
If the mistakenly booted kernel isn't suspend enabled, however, you need a more generic method of removing the image, such as mkswapping the storage device. This is what I was speaking of.
The following code is used in the SUSE bootscripts to do exactly this:
----------------------------------------------------
get_swap_id(){
local line;
fdisk -l | while read line; do
case "$line" in
/*Linux\ [sS]wap*) echo "${line%% *}"
esac
done
}
check_swap_sig() {
local part="$(get_swap_id)"
local where what type rest p c
while read where what type rest ; do
test "$type" = "swap" || continue
c=continue
for p in $part ; do
test "$p" = "$where" && c=true
done
$c
case "$(dd if=$where bs=1 count=6 skip=4086 2>/dev/null)" in S1SUSP|S2SUSP) mkswap $where
esac
done </etc/fstab
}
---------------------------------------------------------------------This invalidates the suspend signature if the kernel has not already done it. It probably does not cover the softwaresuspend2 signature but that should be trivial to add.
Regards,
Stefan
Signature · 5 lines
Nigel Cunningham Software Engineer, Canberra, Australia http://www.cyclades.com Ph: +61 (2) 6292 8028 Mob: +61 (417) 100 574
Quoted 9 lines · Nigel Cunningham
Hi Stefan.
For Suspend2, we also put a device id in the space, so there's only room for one character, which is a lower or upper case Z. (We also validate the device ID, so a random Z won't cause an oops).
Thanks for the code. With your/Suse's permission, I'll ask Bernard (cc'd) to include the script in the docs somewhere with the appropriate credit.
i have consulted our license guy and the original author of /etc/init.d/boot.swap and am glad to say that it is GPL'd ;-)
Have fun,
Stefan
Signature · 4 lines
Stefan Seyfried, QA / R&D Team Mobile Devices, SUSE LINUX, Nürnberg. "Any ideas, John?" "Well, surrounding them's out."
Hi!
Quoted 4 lines
First of all I must say that swsusp has progressed alot and now works very reliably, at least for my configuration, and I use it a lot. Great job!
Quoted 9 lines
But I think there is one pretty severe issue present - even if swsusp is not enabled kernel should check if there is an image in swap and erase it. Today I has somewhat unpleasant experience - after suspending I accidentially loaded a vendor kernel. I was in hurry and decided that resume just failed for some reason so I did couple of things and left the box running. In the evening I realized that I am running vendor kernel and decided to reboot into my devel. version. What I did not expect is for the kernel to find a valid suspend image and restore it. As you might imagine messed up my disk somewhat.
When all the vendor's kernels have swsusp, it will magically kill the signature. Or stick mkswap /dev/XXX in your init scripts.
Pavel
Signature · 2 lines
People were complaining that M$ turns users into beta-testers... ...jr ghea gurz vagb qrirybcref, naq gurl frrz gb yvxr vg gung jnl!
Quoted 2 lines · Pavel Machek
When all the vendor's kernels have swsusp, it will magically kill the signature. Or stick mkswap
/dev/XXXin your init scripts.
This is what I've done in some instances. There should be no harm in sticking that mkswap into your init scripts right before the swapon -a, and then you have a nice userspace solution.
It's safe to reinitialize swap on any clean boot. A resume will not get into the init scripts.
Just remember you're doing the mkswap if you decide to rearrange your partitions at all, or code a script smart enough to grep your swap partitions out of your fstab.
Signature · 2 lines
John M Flinchbaugh [email protected]
Quoted 8 lines · John M Flinchbaugh
Quoted 2 lines · Pavel Machek
When all the vendor's kernels have swsusp, it will magically kill the signature. Or stick mkswap
/dev/XXXin your init scripts.This is what I've done in some instances. There should be no harm in sticking that mkswap into your init scripts right before the swapon -a, and then you have a nice userspace solution.
Quoted 6 lines
It's safe to reinitialize swap on any clean boot. A resume will not get into the init scripts.
Just remember you're doing the mkswap if you decide to rearrange your partitions at all, or code a script smart enough to grep your swap partitions out of your fstab.
It could be a workaround. Still it will cause loss of unsaved work if I happen to load wrong kernel. Given that the code checking for swsusp image can be marked __init I don't understand the reasons gainst doing it.
Signature · 1 line
Dmitry
Hi!
Quoted 8 lines
Quoted 3 lines
Just remember you're doing the mkswap if you decide to rearrange your partitions at all, or code a script smart enough to grep your swap partitions out of your fstab.
It could be a workaround. Still it will cause loss of unsaved work if I happen to load wrong kernel. Given that the code checking for swsusp image can be marked
__initI don't understand the reasons gainst doing it.
How do you know which partitions to check? swsusp gets it from resume= parameter, but if you do not have it compiled, you probably have wrong cmdline, too.
Signature · 1 line
64 bytes from 195.113.31.123: icmp_seq=28 ttl=51 time=448769.1 ms
Quoted 6 lines · Pavel Machek
Hi!
Quoted 4 lines
Quoted 3 lines
Just remember you're doing the mkswap if you decide to rearrange your partitions at all, or code a script smart enough to grep your swap partitions out of your fstab.
Quoted 8 lines
Quoted 4 lines
It could be a workaround. Still it will cause loss of unsaved work if I happen to load wrong kernel. Given that the code checking for swsusp image can be marked
__initI don't understand the reasons gainst doing it.How do you know which partitions to check? swsusp gets it from resume= parameter, but if you do not have it compiled, you probably have wrong cmdline, too.
Ok, that makes sense. I guess I should just stop pulling vendor kernels with the rest of updates since I am not using them anyway.
Sorry for the noise.
Signature · 1 line
Dmitry
Quoted 11 lines · Pavel Machek
Quoted 8 lines
Quoted 3 lines
Just remember you're doing the mkswap if you decide to rearrange your partitions at all, or code a script smart enough to grep your swap partitions out of your fstab.
It could be a workaround. Still it will cause loss of unsaved work if I happen to load wrong kernel. Given that the code checking for swsusp image can be marked
__initI don't understand the reasons gainst doing it.How do you know which partitions to check? swsusp gets it from resume= parameter, but if you do not have it compiled, you probably have wrong cmdline, too.
In many cases, you might have added the resume= line to every kernel that's booted (eg, LILO's global append= parameter, or Debian GRUB's magic kopts gear). Alternately (or additionally), you could examine the signature when sys_swapon is called on a swap partition (though the code couldn't be __init then).
These together I want to claim would catch many of these cases, and any effort to avoid severe filesystem corruption is a good thing.
Bernard.
Signature · 1 line
Bernard Blackham <bernard at blackham dot com dot au>
Hi!
Quoted 12 lines
Quoted 11 lines
Quoted 8 lines
Quoted 3 lines
Just remember you're doing the mkswap if you decide to rearrange your partitions at all, or code a script smart enough to grep your swap partitions out of your fstab.
It could be a workaround. Still it will cause loss of unsaved work if I happen to load wrong kernel. Given that the code checking for swsusp image can be marked
__initI don't understand the reasons gainst doing it.How do you know which partitions to check? swsusp gets it from resume= parameter, but if you do not have it compiled, you probably have wrong cmdline, too.
Quoted 8 lines
In many cases, you might have added the resume= line to every kernel that's booted (eg, LILO's global append= parameter, or Debian GRUB's magic kopts gear). Alternately (or additionally), you could examine the signature when
sys_swaponis called on a swap partition (though the code couldn't be__initthen).These together I want to claim would catch many of these cases, and any effort to avoid severe filesystem corruption is a good thing.
Messing up the kernel to avoid fs corruption in some cases is bad idea.
If you want to be 100% safe, add support to LILO/GRUB: just do not allow selecting wrong kernel if last action was suspend. Bootloader knows, it seen the command lines.
Or simply use Stefan's userland code.
Pavel
Signature · 2 lines
People were complaining that M$ turns users into beta-testers... ...jr ghea gurz vagb qrirybcref, naq gurl frrz gb yvxr vg gung jnl!
Quoted 3 lines · Pavel Machek
If you want to be 100% safe, add support to LILO/GRUB: just do not allow selecting wrong kernel if last action was suspend. Bootloader knows, it seen the command lines.
That's a very good point/solution indeed. The hibernate script available from the Software Suspend 2 homepage already has options to reconfigure LILO/GRUB upon suspending. I'd forgotten about them!
Bernard.
Signature · 1 line
Bernard Blackham <bernard at blackham dot com dot au>