i2c-nforce2: add support for nForce4 (patch against
PATCH 1/1 i2c-nforce2: add support for nForce4 (patch against
Greg,
can you please apply the attached patch (against 2.6.11-rc4, but works as well for 2.6.11-rc3-mm2), that adds support for the two SMBusses of the nForce4 to the i2c-nforce2 i2c bus driver.
The patch is reported to work on the standard nForce4 (i.e. non-Ultra, non-SLI), but I expect that it works as well for the other nForce4 chipsets, that seem to have the same PCI-id for the SMBus-device.
This patch was proposed by Chuck <[email protected]>, thanks to him for the information, testing and his patch.
Cheers,
Hans-Frieder
Signature · 10 lines
--
Hans-Frieder Vogt e-mail: hfvogt <at> arcor .dot. de
hfvogt <at> gmx .dot. net
-------------- next part --------------
A non-text attachment was scrubbed...
Name: 2.6.11-rc4-i2c-nforce2-nforce4-support.diff
Type: text/x-diff
Size: 1477 bytes
Desc: not available
Url : http://lists.lm-sensors.org/pipermail/lm-sensors/attachments/20050218/607e7752/2.6.11-rc4-i2c-nforce2-nforce4-support.binPATCH 1/1 i2c-nforce2: add support for nForce4 (patch against
Quoted 11 lines · Hans-Frieder Vogt
Greg,
can you please apply the attached patch (against 2.6.11-rc4, but works as well for 2.6.11-rc3-mm2), that adds support for the two SMBusses of the nForce4 to the i2c-nforce2 i2c bus driver.
The patch is reported to work on the standard nForce4 (i.e. non-Ultra, non-SLI), but I expect that it works as well for the other nForce4 chipsets, that seem to have the same PCI-id for the SMBus-device.This patch was proposed by Chuck <[email protected]>, thanks to him for the information, testing and his patch.
Can I get a "Signed-off-by:" line from someone? :)
thanks,
greg k-h
PATCH 1/1 i2c-nforce2: add support for nForce4 (patch against
In reply to Hans-Frieder VogtGreg, (this time with "signed off line")
can you please apply the attached patch (against 2.6.11-rc4, but works as
well for 2.6.11-rc3-mm2), that adds support for the two SMBusses of the nForce4 to the i2c-nforce2 i2c bus driver.
The patch is reported to work on the standard nForce4 (i.e. non-Ultra, non-SLI), but I expect that it works as well for the other nForce4 chipsets, that seem to have the same PCI-id for the SMBus-device.
This patch was proposed by Chuck <[email protected]>, thanks to him for the information, testing and his patch.
Cheers,
Hans-Frieder
--
--
Hans-Frieder Vogt e-mail: hfvogt <at> arcor .dot. de
hfvogt <at> gmx .dot. net
-------------- next part --------------
A non-text attachment was scrubbed...
Name: 2.6.11-rc4-i2c-nforce2-nforce4-support.diff
Type: text/x-diff
Size: 1477 bytes
Desc: not available
Url : http://lists.lm-sensors.org/pipermail/lm-sensors/attachments/20050218/70a2caa1/2.6.11-rc4-i2c-nforce2-nforce4-support.bin
Greg KH
AppliedPATCH 1/1 i2c-nforce2: add support for nForce4 (patch against
In reply to Hans-Frieder VogtQuoted 9 lines · Hans-Frieder Vogt
Greg, (this time with "signed off line")
can you please apply the attached patch (against 2.6.11-rc4, but works as
well for 2.6.11-rc3-mm2), that adds support for the two SMBusses of the nForce4 to the i2c-nforce2 i2c bus driver.
The patch is reported to work on the standard nForce4 (i.e. non-Ultra, non-SLI), but I expect that it works as well for the other nForce4 chipsets, that seem to have the same PCI-id for the SMBus-device.
Quoted 4 lines
This patch was proposed by Chuck <[email protected]>, thanks to him for the information, testing and his patch.
Signed-off-by Hans-Frieder Vogt <[email protected]>
Applied, thanks.
greg k-h
Greg KH
AppliedPATCH 1/1 i2c-nforce2: add support for nForce4 (patch against
In reply to Hans-Frieder VogtQuoted 9 lines · Hans-Frieder Vogt
Greg, (this time with "signed off line")
can you please apply the attached patch (against 2.6.11-rc4, but works as
well for 2.6.11-rc3-mm2), that adds support for the two SMBusses of the nForce4 to the i2c-nforce2 i2c bus driver.
The patch is reported to work on the standard nForce4 (i.e. non-Ultra, non-SLI), but I expect that it works as well for the other nForce4 chipsets, that seem to have the same PCI-id for the SMBus-device.
Quoted 4 lines
This patch was proposed by Chuck <[email protected]>, thanks to him for the information, testing and his patch.
Signed-off-by Hans-Frieder Vogt <[email protected]>
Applied, thanks.
greg k-h