Skip to contentSkip to conversation

2.6.11-rc4 seems broken for Nforce2 chipset

DISCUSSION really bensoo_at_soo_dot_com 2 participants 3 messages Feb 21, 2005 – Feb 22, 2005

lore
Share & tools
lore
#0 lore raw

Hi;

i'm crashing my box twice a day running 2.6.11-rc4 when i turn on the Athlon-XP CPU bus disconnect.

When network activity is up over maybe 120KB/s and i'm playing a video file at the same time, then chances are good i'll lock up the box.

Box runs a Chaintech Summit 7NIF2 with 1G RAM and an Audigy 2 sound card. When it locks up sometimes the sound card goes into a little loop where it replays approx the half second of audio leading up to the lockup.

b

#1 lore raw
Quoted 9 lines · really bensoo_at_soo_dot_com

Hi;

i'm crashing my box twice a day running 2.6.11-rc4 when i turn on the Athlon-XP CPU bus disconnect.

When network activity is up over maybe 120KB/s and i'm playing a video file at the same time, then chances are good i'll lock up the box.

Quoted 5 lines

Box runs a Chaintech Summit 7NIF2 with 1G RAM and an Audigy 2 sound card. When it locks up sometimes the sound card goes into a little loop where it replays approx the half second of audio leading up to the lockup.

Bus disconnect have never been reliable on my Athlon XP 1800+, regardless of operating system.

#2 lore raw
Quoted 3 lines · Andre Tomt
Quoted 2 lines · really bensoo_at_soo_dot_com

i'm crashing my box twice a day running 2.6.11-rc4 when i turn on the Athlon-XP CPU bus disconnect.

[...]

Quoted 3 lines

Bus disconnect have never been reliable on my Athlon XP 1800+, regardless of operating system.

i have an old ECS mboard and an old MSI board where that's true, but that's because the mboards' too old and their hardware actually weren't designed to work with bus disconnect turned on.

The newer one's i have all work ok with the last few iterations of the Linux kernel and i've had uptimes that spanned the weeks between kernel upgrades. Until the latest 2.6.11-rc4 anyway.

b