Skip to contentSkip to conversation

jffs2 fs for linux

U-Boot-Users Hinko Kocevar 3 participants 7 messages Feb 25, 2005 – Feb 27, 2005

lore
Share & tools
lore
#0 lore raw

Hi,

(I apologize if the list recieves this(similar) mail twice)

I have jffs2 fs image in flash and would like to mount it when linux asks for root fs.Linux gives out:
...
Root-NFS: No NFS server available, giving up.
VFS: Unable to mount root fs via NFS, trying floppy.

Kernel panic - not syncing: VFS: Unable to mount root fs on 

unknown-block(2,0)
<0>Rebooting in 5 seconds..?

and command line is:
Kernel command line: root=/dev/mtdblock2 rootfstype=jffs2 rw console=ttyS0,115200 mem=64M panic=5

Image is located at 0x2c0000 and u-boot can see it, too:
Ub00t> ls
Scanning JFFS2 FS: ...... done.

  drwxr-xr-x        0 Mon Feb 21 11:39:54 2005 bin
  drwxr-xr-x        0 Mon Feb 21 17:48:03 2005 dev
  drwxr-xr-x        0 Fri Feb 18 14:00:50 2005 etc
  drwxr-xr-x        0 Wed Feb 23 16:38:26 2005 lib
  lrwxrwxrwx       11 Tue Feb 22 07:58:53 2005 linuxrc -> bin/busybox
  drwxr-xr-x        0 Wed Dec 29 11:01:22 2004 mnt
  drwxr-xr-x        0 Tue Jul 20 10:38:27 2004 proc
  drwxr-xr-x        0 Thu Feb 17 21:58:50 2005 sbin
  drwxr-xr-x        0 Wed Feb 23 17:40:11 2005 staging
  drwxr-xr-x        0 Wed Feb 23 23:27:06 2005 tmp
  drwxr-xr-x        0 Wed Feb 23 16:40:41 2005 usr
  drwxr-xr-x        0 Tue Jul 20 10:38:41 2004 var

But how do I supply this info to u-boot when booting linux? Is 'fsload' the right way to go? But I would still like to have kernel separated from fs image...

Using kernel 2.6.9 here.

regards,
hk

Signature · 5 lines
hinko <dot> kocevar <at> iskramedical <dot> si
Hinko Kocevar, embedded systems developer
Iskra Medical d.o.o., Stegne 23, 1k LJ, SLO-EU

	"A? r?n"	|	[Analects XII:22]
#1 lore raw

Hi Hinko,

I had a similar problem. If you make sure
that your Flash is programmed similar to
the following order then it should work
with the setup you describe:

  Image1 Addr1 u-boot  <-- mounted as /dev/mtdblock0
  Image2 Addr2 kernel  <-- mounted as /dev/mtdblock1
  Image3 Addr3 jffs2   <-- mounted as /dev/mtdblock2

Hope this helps,
Alan.

Quoted 68 lines

-- Original Message --
From: Hinko Kocevar <[email protected]>
To: uboot <[email protected]>
Subject: [U-Boot-Users] jffs2 fs for linux
Date: Fri, 25 Feb 2005 15:31:44 +0100

Hi,

(I apologize if the list recieves this(similar) mail twice)

I have jffs2 fs image in flash and would like to mount it when linux asks for root fs.Linux gives out:
...
Root-NFS: No NFS server available, giving up.
VFS: Unable to mount root fs via NFS, trying floppy.

Kernel panic - not syncing: VFS: Unable to mount root fs on 

unknown-block(2,0)
<0>Rebooting in 5 seconds..?

and command line is:
Kernel command line: root=/dev/mtdblock2 rootfstype=jffs2 rw console=ttyS0,115200 mem=64M panic=5

Image is located at 0x2c0000 and u-boot can see it, too:
Ub00t> ls
Scanning JFFS2 FS: ...... done.

 drwxr-xr-x        0 Mon Feb 21 11:39:54 2005 bin
 drwxr-xr-x        0 Mon Feb 21 17:48:03 2005 dev
 drwxr-xr-x        0 Fri Feb 18 14:00:50 2005 etc
 drwxr-xr-x        0 Wed Feb 23 16:38:26 2005 lib
 lrwxrwxrwx       11 Tue Feb 22 07:58:53 2005 linuxrc -> bin/busybox
 drwxr-xr-x        0 Wed Dec 29 11:01:22 2004 mnt
 drwxr-xr-x        0 Tue Jul 20 10:38:27 2004 proc
 drwxr-xr-x        0 Thu Feb 17 21:58:50 2005 sbin
 drwxr-xr-x        0 Wed Feb 23 17:40:11 2005 staging
 drwxr-xr-x        0 Wed Feb 23 23:27:06 2005 tmp
 drwxr-xr-x        0 Wed Feb 23 16:40:41 2005 usr
 drwxr-xr-x        0 Tue Jul 20 10:38:41 2004 var

But how do I supply this info to u-boot when booting linux? Is 'fsload' the right way to go? But I would still like to have kernel

separated from fs image...

Using kernel 2.6.9 here.

regards,
hk

Signature · 16 lines
hinko <dot> kocevar <at> iskramedical <dot> si
Hinko Kocevar, embedded systems developer
Iskra Medical d.o.o., Stegne 23, 1k LJ, SLO-EU

	"A? r?n"	|	[Analects XII:22]


-------------------------------------------------------
SF email is sponsored by - The IT Product Guide
Read honest & candid reviews on hundreds of IT Products from real users.
Discover which products truly live up to the hype. Start reading now.
http://ads.osdn.com/?ad_ide95&alloc_id396&op=click
_______________________________________________
U-Boot-Users mailing list
U-Boot-Users at lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/u-boot-users
#2 lore raw
Quoted 11 lines · Alan Casey

Hi Hinko,

I had a similar problem. If you make sure
that your Flash is programmed similar to
the following order then it should work
with the setup you describe:

  Image1 Addr1 u-boot  <-- mounted as /dev/mtdblock0
  Image2 Addr2 kernel  <-- mounted as /dev/mtdblock1
  Image3 Addr3 jffs2   <-- mounted as /dev/mtdblock2

Hmm, this is just like my setup in flash.
0x00000000 - 0x000c0000 uboot+env
0x000c0000 - 0x002c0000 kernel
0x002c0000 - 0x02000000 rootfs(jffs2)

But as you can see from my previous post, kernel does not mount the rootfs as expected.

Are there any special/other bits I have to setup?

The same layout works on another pxa platform I have, but it is not running u-boot...

regards,
hk

Signature · 5 lines
hinko <dot> kocevar <at> iskramedical <dot> si
Hinko Kocevar, embedded systems developer
Iskra Medical d.o.o., Stegne 23, 1k LJ, SLO-EU

	"A? r?n"	|	[Analects XII:22]
#3 lore raw

Hi Hinko,

Another thing you could try is when running
U-Boot to set your bootargs environment
variable to match your kernel command
line (i.e. add rootfstype=jffs2):

setenv bootargs root=/dev/mtdblock2 rootfstype=jffs2 console=ttyS0,115200 mem=64M panic=5

I've noticed that if i dont set 'rootfstype=jffs2' in the bootargs variable i get the same error message you were seeing for some reason.

Hope this helps,
Alan.

Quoted 54 lines

-- Original Message --
From: Hinko Kocevar <[email protected]>
To: alan.casey5 at mail.dcu.ie
Cc: uboot <[email protected]>
Subject: Re: [U-Boot-Users] jffs2 fs for linux
Date: Fri, 25 Feb 2005 18:37:59 +0100

Quoted 11 lines · Alan Casey

Hi Hinko,

I had a similar problem. If you make sure
that your Flash is programmed similar to
the following order then it should work
with the setup you describe:

  Image1 Addr1 u-boot  <-- mounted as /dev/mtdblock0
  Image2 Addr2 kernel  <-- mounted as /dev/mtdblock1
  Image3 Addr3 jffs2   <-- mounted as /dev/mtdblock2

Hmm, this is just like my setup in flash.
0x00000000 - 0x000c0000 uboot+env
0x000c0000 - 0x002c0000 kernel
0x002c0000 - 0x02000000 rootfs(jffs2)

But as you can see from my previous post, kernel does not mount the rootfs as expected.

Are there any special/other bits I have to setup?

The same layout works on another pxa platform I have, but it is not running u-boot...

regards,
hk

Signature · 16 lines
hinko <dot> kocevar <at> iskramedical <dot> si
Hinko Kocevar, embedded systems developer
Iskra Medical d.o.o., Stegne 23, 1k LJ, SLO-EU

	"A? r?n"	|	[Analects XII:22]


-------------------------------------------------------
SF email is sponsored by - The IT Product Guide
Read honest & candid reviews on hundreds of IT Products from real users.
Discover which products truly live up to the hype. Start reading now.
http://ads.osdn.com/?ad_ide95&alloc_id396&op=click
_______________________________________________
U-Boot-Users mailing list
U-Boot-Users at lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/u-boot-users
#4 lore raw
In reply to Hinko Kocevar
Quoted 3 lines · In message <[email protected]> you wrote:

But as you can see from my previous post, kernel does not mount the rootfs as expected.

It would definitely be helpful if you showed us the full boot messages of your Linux kernel, or at lest the part which includes the MTD initalization and flash partitioning.

But please NOT on this list, it is off topic here.

Best regards,

Wolfgang Denk

Signature · 5 lines
See us @ Embedded World, Nuremberg, Feb 22 - 24,  Hall 10.0 Booth 310
Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: wd at denx.de
The philosophy exam was a piece of cake  -  which  was  a  bit  of  a
surprise, actually, because I was expecting some questions on a sheet
of paper.
#5 lore raw
In reply to Hinko Kocevar

Dear Hinko,

Quoted 2 lines · in message <[email protected]> you wrote:

(I apologize if the list recieves this(similar) mail twice)

Yes, we did :-(

Quoted 2 lines

I have jffs2 fs image in flash and would like to mount it when linux asks for root fs.Linux gives out:

This is actually NOT related to U-Boot, so it's off topic on this list.

Quoted 3 lines

and command line is:
Kernel command line: root=/dev/mtdblock2 rootfstype=jffs2 rw console=ttyS0,115200 mem=64M panic=5

...

Quoted 1 line

But how do I supply this info to u-boot when booting linux?

You don't supply any inforation to U-Boot, it's the LInux kernel who needs to know where to find the root filesystem, Assuming your flash partitioning in Linux is correct, then the "root=/dev/mtdblock2" should be all you need.

Best regards,

Wolfgang Denk

Signature · 3 lines
See us @ Embedded World, Nuremberg, Feb 22 - 24,  Hall 10.0 Booth 310
Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: wd at denx.de
The more sins you confess, the more books you will sell.
#6 lore raw
Quoted 1 line · Wolfgang Denk

Yes, we did :-(

I'm having mail client problems, again :(. I'm really sorry for this.

Quoted 3 lines

This is actually NOT related to U-Boot, so it's off topic on this list.

Yes it is kinda off topic, but I suspected that u-boot was "rejcting/ignoring" the rootfs image in the flash... so I decided to post here first to see if there are any steps that need to be taken on the rootfs before using jffs2 with u-boot.

From the posts I can conclude that this problem has nothig to do with
u-boot.

regards,
hk

Signature · 5 lines
hinko <dot> kocevar <at> iskramedical <dot> si
Hinko Kocevar, embedded systems developer
Iskra Medical d.o.o., Stegne 23, 1k LJ, SLO-EU

	"A? r?n"	|	[Analects XII:22]