Skip to contentSkip to conversation

2.6.11-rc4-mm1

PATCH New Andrew Morton 27 participants 95 messages Feb 23, 2005 – Mar 17, 2005

Subsystems (5)
lore
Share & tools
lore
#0 lore raw

ftp://ftp.kernel.org/pub/linux/kernel/people/akpm/patches/2.6/2.6.11-rc4/2.6.11-rc4-mm1/

- Various fixes and updates all over the place. Things seem to have slowed down a bit.

- Last, final, ultimate call: if anyone has patches in here which are 2.6.11 material, please tell me.

Changes since 2.6.11-rc3-mm1:

linus.patch
bk-acpi.patch
bk-agpgart.patch
bk-alsa.patch
bk-cifs.patch
bk-cpufreq.patch
bk-driver-core.patch
bk-driver-core-infiniband-build-fix.patch
bk-drm-via.patch
bk-i2c.patch
bk-ide-dev.patch
bk-ieee1394.patch
bk-input.patch
bk-dtor-input.patch
bk-jfs.patch
bk-kbuild.patch
bk-kconfig.patch
bk-libata.patch
bk-netdev.patch
bk-ntfs.patch
bk-pci.patch
bk-scsi.patch
bk-serial.patch
bk-usb.patch
bk-watchdog.patch

Latest versions of external bk trees

-alpha-add-missing-dma_mapping_error.patch -fix-compat-shmget-overflow.patch -fix-shmget-for-ppc64-s390-64-sparc64.patch -binfmt_elf-clearing-bss-may-fail.patch -qlogic-warning-fixes.patch -oprofile-exittext-referenced-in-inittext.patch -force-read-implies-exec-for-all-32bit-processes-in-x86-64.patch -oprofile-arm-xscale1-pmu-support-fix.patch -add-try_acquire_console_sem.patch -update-aty128fb-sleep-wakeup-code-for-new-powermac-changes.patch -radeonfb-update.patch
-radeonfb-build-fix.patch -fix-32-bit-calls-to-snd_pcm_channel_info.patch -update-to-ipmi-driver-to-support-old-dmi-spec.patch -serio-warning-fix.patch -fix-small-vmalloc-per-allocation-limit.patch -net-s2io-replace-schedule_timeout-with-msleep.patch -nls_cp936c-is-not-synchronized-with-ms-translation-table.patch -add-local-bio-pool-support-and-modify-dm.patch -add-local-bio-pool-support-and-modify-dm-uninline-zero_fill_bio.patch -floppy-add-sysfs-symlink.patch -pcmcia-add-support-ti-pci4510-cardbus-bridge.patch -mark-the-mcd-cdrom-driver-as-broken.patch -tridentfbc-make-some-code-static.patch

Merged

+ppc64-fix-compilation-for-maple-board.patch

ppc64 build fix

+alps-do-not-activate-on-unsupported-models.patch

Input driver safety.

+device-mapper-dm-raid1-deadlock-fix.patch

dm deadlock fix

+fix-ip_rt_gc_min_interval_ms-procfs-sysctl.patch

Fix a networking sysctl

+ppc32-64-bit-resource-fix.patch

pcp32 build fix (for bk-pci.patch)

+nfsd-discard-cache_hashed-flag-keeping-information-in-refcount-instead.patch

nfsd fix

+panasonic-acpi-driver.patch +pcc_acpi-build-fix.patch +new-sony_acpi-driver.patch +acpi-fix-a-if-statement-in-setup_sys_fs_device_files.patch +fix-help-for-acpi_container.patch

Various ACPI fixes and enhancements

+tpm-build-fix.patch
+bk-driver-core-infiniband-build-fix.patch

Fix bk-driver-core.patch build bugs

+fix-for-the-ipmi-smb-driver.patch
+ipmi-documentation-updates.patch

IPMI driver fixes

+ide-fix-masked_irq-arg-handling-for-ide_do_request.patch

Old patch to fix an IDE DMA problem

+ppc-cpufreq-kconfig-fix.patch

Fix a bk-kbuild ppc32 problem.

+sis900-oops-fix.patch

Fix oops in this net driver

+tone-down-pci=routeirq-message.patch
+pcmcia-bridge-resource-management-fix.patch

More fixes for bk-pci.patch

+add-scsi-changer-driver.patch

SCSI changer support

+scsi-ch-build-fix.patch

scsi build fix

+6300esb-watchdog-driver.patch

New watchdog driver

+stop-using-base-argument-in-__free_pages_bulk.patch +stop-using-base-argument-in-__free_pages_bulk-tidy.patch

mm code cleanup

+mempool-protect-buffer-overflow-in-mempool_resize.patch

mempool fixes

+move-accounting-function-calls-out-of-critical-vm-code-pathspatch-fix.patch

Fix lockup in move-accounting-function-calls-out-of-critical-vm-code-pathspatch.patch

+ppc32-update-arch-ppc-configs-pmac_defconfig.patch +ppc32-artesyn-katana-platform-update.patch +ppc32-artesyn-katana-enet-update.patch +ppc32-move-irq_descstatus-irq_level-bit-setup-to-xilinx_picc.patch +ppc32-lindentify-ppc4xx-pic-driver.patch +ppc32-ppc4xx-pic-ack-parent-uic-in-disable_irq.patch +ppc32-report-chip-version-in-proc-cpuinfo-for-85xx-boards.patch +ppc32-fix-formatting-of-cds-common-platform-file.patch

ppc32 stuff

+fix-iounmap-and-a-pageattr-memleak-x86-and-x86-64.patch

Fix x86/x86_64 low-level mm handling

+x86_64-dump-stack-in-early-exception.patch

Add a dump_stack() when x86_64 dies early in boot (this patch is old and will be dropped).

+altix-ignore-input-during-early-boot.patch
+altix-ioc4-serial-driver-support.patch

ALtix updates

+m32r-use-generic-bugh.patch

m32r code consolidation

-fix-put_user-under-mmap_sem-in-sys_get_mempolicy.patch

This is done in fix-futex-mmap_sem-deadlock.patch now.

+serial-add-the-output-interface-control-to.patch

MIPS serial driver updates

+areca-raid-linux-scsi-driver-fix.patch

New RAID driver (this patch is having a hard life and needs a re-review)

+add-local-bio-pool-support-and-modify-dm.patch +add-local-bio-pool-support-and-modify-dm-uninline-zero_fill_bio.patch +add-local-bio-pool-support-and-modify-dm-use-global-bio-set-pool.patch

BIO enhancements for devicemapper

+fix-ufs-quota.patch

UFS quota fix

+run-softirqs-on-proper-processor-on-offline.patch

CPU hotplug fix

+aops-based-loop-io.patch

In the loop driver, fall back to using the file_operations if the right address_space_operations aren't available.

+tty-output-lossage-fix.patch

Fix tty character droppage

+add-timing-information-to-printk-messages.patch

Option to timestamp printk output.

+seccomp.patch
+seccomp-tidy.patch

Andrea's secure computing thing

+minor-bttv-driver-update.patch
+tv-tuner-module-update.patch

bttv/TV updates

+remove-mount-option-parsing-from-procfs.patch

cleanup

+credits-update.patch

credits update

+bksend-example-script-fix.patch

Fix bk-send docco

+export-kallsyms_lookup_name.patch

Export a symbol for kprobes

+add-nobh_writepage-support.patch
+add-nobh_writepage-support-tidy.patch
+add-nobh_writepage-support-fix.patch

Add full writepage support for those filesystems which use the no-buffer_head address_space_operations.

+fix-1-wire-dallas-in-bigendian-machines.patch

Fix the w1 driver for big-endian hardware.

+fix-futex-mmap_sem-deadlock.patch

Fix double-down_read in the futex and mempolicy code

+inotify.patch

Not sure if this is the latest version.

+posix-timers-cpu-clock-support-for-posix-timers-fix2.patch

Fix posix-timers-cpu-clock-support-for-posix-timers.patch again

+pcmcia-yenta_socket-ti4150-support.patch +pcmcia-pd6729-convert-to-pci_register_driver.patch +pcmcia-rsrc_nonstatic-sysfs-output.patch +pcmcia-rsrc_nonstatic-sysfs-input.patch +pcmcia-mark-resource-setup-as-done.patch +pcmcia-pcmcia_device_probe.patch +pcmcia-pcmcia_device_remove.patch +pcmcia-pcmcia_device_add.patch +pcmcia-use-bus_rescan_devices.patch +pcmcia-add-pcmcia-devices-autonomously.patch +pcmcia-determine-some-useful-information-about-devices.patch +pcmcia-per-device-sysfs-output.patch

pcmcia updates

+nfsacl-encode-and-decode-arbitrary-xdr-arrays-fix2.patch

Fix nfsacl-encode-and-decode-arbitrary-xdr-arrays.patch even more. (I'll be droping all the nfsacl patches when the new version comes through).

+nfsacl-return-enosys-for-rpc-programs-that-are-unavailable-fix.patch

Another nfsacl fix

+kgdb-documentation-fix.patch

Fix kgdb docco

+perfctr-2710-api-update-1-4-common.patch
+perfctr-2710-api-update-2-4-i386.patch
+perfctr-2710-api-update-3-4-x86_64.patch
+perfctr-2710-api-update-4-4-ppc32.patch

perfctr updates

+au1x00_uart-deadlock-fix.patch

Fix tty echo deadlock in this serial driver

-make-acpi_bus_register_driver-consistent-with-pci_register_driver-again.patch

I think I dropped this.

+tridentfbc-make-some-code-static.patch +intelfb-vesa_modes-require-config_fb_modehelpers.patch +fbdev-make-fb_find_mode-return-failure-if-modular.patch +fbdev-logo-code-fixes.patch +fbdev-kbuild-cleanups.patch +geodefb-add-geode-framebuffer-driver.patch +nvidiafb-add-update-framebuffer-driver-for-nvidia-chipsets.patch +fbdev-generic-drawing-function-cleanups.patch +fbdev-generic-drawing-function-cleanups-fix.patch

fbdev things

+md-remove-possible-oops-in-md-raid1.patch +md-make-raid5-and-raid6-robust-against-failure-during-recovery.patch +md-remove-kludgy-level-check-from-mdc.patch +md-merge-md_enter_safemode-into-md_check_recovery.patch +md-improve-locking-on-safemode-and-move-superblock-writes.patch +md-improve-the-interface-to-sync_request.patch +md-optimised-resync-using-bitmap-based-intent-logging.patch +md-optimised-resync-using-bitmap-based-intent-logging-fix.patch +md-raid1-support-for-bitmap-intent-logging.patch +md-optimise-reconstruction-when-re-adding-a-recently-failed-drive.patch

RAID updates

+device-mapper-multipath.patch +device-mapper-multipath-round-robin-path-selector.patch +device-mapper-multipath-hardware-handler.patch +device-mapper-multipath-hardware-handler-for-emc.patch +device-mapper-tag-multipath-exports-gpl.patch +device-mapper-some-code-formatting-cleanups.patch +device-mapper-some-multipath-fn-renames.patch

More DM updates

+mxserc-remove-unused-variable.patch +update-panic-comment.patch
+pm3fb-remove-kernel-22-code.patch +sstfbc-make-some-code-static.patch +scsi-53c700c-make-ncr_700_intr-static.patch +scsi-dpt_i2oc-make-some-code-static.patch +i386-io_apicc-make-two-variables-static.patch +i386-x86_64-mpparsec-make-some-code-static.patch +i386-quirksc-make-a-function-static.patch +drivers-block-paride-cleanups.patch +cfq-ioschedc-make-some-code-static.patch +deadline-ioschedc-make-a-struct-static.patch +remove-obsolete-linux-resourceh-inclusion-from-asm-generic-siginfoh.patch

Little code tweaks

+fix-pm_message_t-in-generic-code.patch +fix-u32-vs-pm_message_t-in-usb.patch +fix-u32-vs-pm_message_t-confusion-in-oss.patch +fix-u32-vs-pm_message_t-confusion-in-pcmcia.patch +fix-u32-vs-pm_message_t-confusion-in-firewire.patch +fix-u32-vs-pm_message_t-in-network-device-drivers.patch +fix-u32-vs-pm_message_t-confusion-in-framebuffers.patch +fix-u32-vs-pm_message_t-confusion-in-mmc.patch +fix-u32-vs-pm_message_t-confusion-in-serials.patch +fix-u32-vs-pm_message_t-in-macintosh.patch +fix-u32-vs-pm_message_t-confusion-in-agp.patch

The great pm_message_t conversion.

+fs-jffs-misc-cleanups.patch +fs-jffs2-misc-cleanups.patch +drivers-block-cciss-misc-cleanups.patch +remove-unused-get_resource_list-declaration.patch +typo-in-include-linux-compilerh.patch

More little fixes

number of patches in -mm: 701
number of changesets in external trees: 791
number of patches in -mm only: 677
total patches: 1468

All 701 patches:

linus.patch

ppc64-fix-compilation-for-maple-board.patch
ppc64: fix compilation for Maple board

alps-do-not-activate-on-unsupported-models.patch
ALPS: do not activate on unsupported models

device-mapper-dm-raid1-deadlock-fix.patch
device-mapper: dm-raid1 deadlock fix

fix-ip_rt_gc_min_interval_ms-procfs-sysctl.patch
ipv4: Fix ip_rt_gc_min_interval_ms procfs/sysctl

ppc32-64-bit-resource-fix.patch
ppc32: 64 bit resource fix

nfsd--sgi-921857-find-broken-with-nohide-on-nfsv3.patch
SGI 921857: find broken with nohide on NFSv3

nfsd--exportfs-reduce-stack-usage.patch
nfsd: exportfs: reduce stack usage

nfsd--svcrpc-add-a-per-flavor-set_client-method.patch
nfsd: svcrpc: add a per-flavor set_client method

nfsd--svcrpc-rename-pg_authenticate.patch
nfsd: svcrpc: rename pg_authenticate

nfsd--svcrpc-move-export-table-checks-to-a-per-program-pg_add_client-method.patch
nfsd: svcrpc: move export table checks to a per-program pg_add_client method

nfsd--nfs4-use-new-pg_set_client-method-to-simplify-nfs4-callback-authentication.patch
nfsd: nfs4: use new pg_set_client method to simplify nfs4 callback authentication

nfsd--lockd-dont-try-to-match-callback-requests-against-export-table.patch
nfsd: lockd: don't try to match callback requests against export table

nfsd--nfsd-remove-pg_authenticate-field.patch
nfsd: nfsd: remove pg_authenticate field

nfsd--global-static-cleanups-for-nfsd.patch
nfsd: global/static cleanups for nfsd

nfsd--change-nfsd-reply-cache-to-use-listh-lists.patch
nfsd: change nfsd reply cache to use list.h lists

nfsd-discard-cache_hashed-flag-keeping-information-in-refcount-instead.patch
nfsd: discard CACHE_HASHED flag, keeping information in refcount instead.

ia64-config_apci_numa-fix.patch
ia64 CONFIG_APCI_NUMA fix

ia64-acpi-build-fix.patch
ia64 acpi build fix

bk-acpi.patch

panasonic-acpi-driver.patch
Panasonic ACPI driver

pcc_acpi-build-fix.patch
pcc_acpi build fix

acpi-sleep-while-atomic-during-s3-resume-from-ram.patch
acpi: sleep-while-atomic during S3 resume from ram

acpi-report-errors-in-fanc.patch
ACPI: report errors in fan.c

acpi-flush-tlb-when-pagetable-changed.patch
acpi: flush TLB when pagetable changed

fix-an-issue-in-acpi-processor-and-container-drivers-related-with-kobject_hotplug.patch
Fix an issue in ACPI processor and container drivers related with kobject_hotplug()

acpi-fix-containers-notify-handler-to-handle-proper-cases-properly.patch
acpi: fix container's notify handler to handle proper cases properly

acpi_power_off-bug-fix.patch
acpi_power_off bug fix

new-sony_acpi-driver.patch
new sony_acpi driver

acpi-fix-a-if-statement-in-setup_sys_fs_device_files.patch
acpi: fix a if-statement in setup_sys_fs_device_files()

bk-agpgart.patch

bk-alsa.patch

bk-cifs.patch

bk-cpufreq.patch

cpufreq-core-reduce-warning-messages.patch
cpufreq-core: reduce warning messages

bk-driver-core.patch

tpm-build-fix.patch
tpm-build-fix

bk-driver-core-infiniband-build-fix.patch
bk-driver-core infiniband build fix

bk-drm-via.patch

bk-i2c.patch

changes-to-the-i2c-driver-to-support-a-non-blocking-interface.patch
Changes to the I2C driver to support a non-blocking interface

minor-ipmi-enhancements.patch
Minor IPMI enhancements

modify-the-i801-i2c-driver-to-use-the-non-blocking-interface.patch
Modify the i801 I2C driver to use the non-blocking interface.

add-the-ipmi-smbus-driver.patch
Add the IPMI SMBus driver

add-the-ipmi-smbus-driver-fix.patch
ipmi-build-fix-42

add-the-ipmi-smbus-driver-fix-fix.patch
add-the-ipmi-smbus-driver-fix fix

fix-for-the-ipmi-smb-driver.patch
Fix for the IPMI SMB driver

ipmi-documentation-updates.patch
IPMI documentation updates

bk-ide-dev.patch

ide-fix-masked_irq-arg-handling-for-ide_do_request.patch
ide: Fix masked_irq arg handling for ide_do_request()

bk-ieee1394.patch

ohci1394-dma_pool_destroy-while-in_atomic-irqs_disabled.patch
ohci1394: dma_pool_destroy while in_atomic() && irqs_disabled() ohci1394-dma_pool_destroy-while-in_atomic-irqs_disabled-tidy ohci1394-dma_pool_destroy-while-in_atomic-irqs_disabled-simplification

sbp2-fix-hang-on-unload.patch
sbp2: fix hang on unload

bk-input.patch

bk-dtor-input.patch

twidjoy-build-fix.patch
twidjoy-build-fix

bk-jfs.patch

bk-kbuild.patch

bk-kconfig.patch

ppc-cpufreq-kconfig-fix.patch
ppc32: cpufreq kconfig fix

bk-libata.patch

bk-netdev.patch

sis900-oops-fix.patch
sis900 kernel oops fix

bk-ntfs.patch

bk-pci.patch

tone-down-pci=routeirq-message.patch
tone down pci=routeirq message

pcmcia-bridge-resource-management-fix.patch
pcmcia bridge resource management fix

bk-scsi.patch

add-scsi-changer-driver.patch
add scsi changer driver

scsi-ch-build-fix.patch
scsi ch.c build fix

bk-serial.patch

bk-usb.patch

compat-ioctl-for-submiting-urb.patch
compat ioctl for submiting URB

compat-ioctl-for-submiting-urb-fix.patch
compat-ioctl-for-submiting-urb-fix

bk-watchdog.patch

6300esb-watchdog-driver.patch
6300ESB watchdog driver

mm.patch
add -mmN to EXTRAVERSION

fix-help-for-acpi_container.patch
Fix help for ACPI_CONTAINER

vm-pageout-throttling.patch
vm: pageout throttling

orphaned-pagecache-memleak-fix.patch
orphaned pagecache memleak fix

swapspace-layout-improvements.patch
swapspace-layout-improvements

swapspace-layout-improvements-fix.patch
/proc/swaps negative Used

simpler-topdown-mmap-layout-allocator.patch
simpler topdown mmap layout allocator

vmscan-reclaim-swap_cluster_max-pages-in-a-single-pass.patch
vmscan: reclaim SWAP_CLUSTER_MAX pages in a single pass

stop-using-base-argument-in-__free_pages_bulk.patch
stop using "base" argument in __free_pages_bulk()

stop-using-base-argument-in-__free_pages_bulk-tidy.patch
stop-using-base-argument-in-__free_pages_bulk-tidy

mempool-protect-buffer-overflow-in-mempool_resize.patch
mempool: protect buffer overflow in mempool_resize

fix-mincore-cornercases-overflow-caused-by-large-len.patch
Fix mincore cornercases: overflow caused by large "len"

randomisation-global-sysctl.patch
Randomisation: global sysctl

randomisation-global-sysctl-fix.patch
randomisation-global-sysctl-fix

randomisation-infrastructure.patch
Randomisation: infrastructure

fix-compilation-of-uml-after-the-stack-randomization-patches.patch
Fix compilation of UML after the stack-randomization patches

randomisation-add-pf_randomize.patch
Randomisation: add PF_RANDOMIZE

randomisation-stack-randomisation.patch
Randomisation: stack randomisation

randomisation-mmap-randomisation.patch
Randomisation: mmap randomisation

randomisation-enable-by-default.patch
Randomisation: enable by default

randomisation-addr_no_randomize-personality.patch
Randomisation: add ADDR_NO_RANDOMIZE personality

randomisation-top-of-stack-randomization.patch
Randomisation: top-of-stack randomization

move-accounting-function-calls-out-of-critical-vm-code-pathspatch.patch
Move accounting function calls out of critical vm code paths

move-accounting-function-calls-out-of-critical-vm-code-pathspatch-fix.patch
move-accounting-function-calls-out-of-critical-vm-code-pathspatch fix

invalidate-range-of-pages-after-direct-io-write.patch
invalidate range of pages after direct IO write

invalidate-range-of-pages-after-direct-io-write-fix.patch
invalidate-range-of-pages-after-direct-io-write-fix

invalidate-range-of-pages-after-direct-io-write-fix-fix.patch
invalidate-range-of-pages-after-direct-io-write-fix-fix

write-and-wait-on-range-before-direct-io-read.patch
write and wait on range before direct io read

only-unmap-what-intersects-a-direct_io-op.patch
only unmap what intersects a direct_IO op

make-tree_lock-an-rwlock.patch
make mapping->tree_lock an rwlock

must-fix.patch
must fix lists update
must fix list update
mustfix update
must-fix update
mustfix lists

b44-bounce-buffer-fix.patch
b44 bounce buffering fix

ppc-ppc64-abstract-cpu_feature-checks.patch
PPC/PPC64: Abstract cpu_feature checks.

ppc32-dont-create-tmp_gas_check.patch
ppc32: Don't create .tmp_gas_check

ppc32-fix-mv64x60-register-relocation-bug-in-bootwrapper.patch
ppc32: fix mv64x60 register relocation bug in bootwrapper

ppc32-update-arch-ppc-configs-pmac_defconfig.patch
ppc32: update arch/ppc/configs/pmac_defconfig

ppc32-artesyn-katana-platform-update.patch
ppc32: Artesyn Katana platform update

ppc32-artesyn-katana-enet-update.patch
ppc32: Artesyn Katana enet update

ppc32-move-irq_descstatus-irq_level-bit-setup-to-xilinx_picc.patch
ppc32: move irq_desc[].status, IRQ_LEVEL bit setup to xilinx_pic.c

ppc32-lindentify-ppc4xx-pic-driver.patch
ppc32: Lindentify PPC4xx PIC driver

ppc32-ppc4xx-pic-ack-parent-uic-in-disable_irq.patch
ppc32: PPC4xx PIC: ack parent UIC in disable_irq

ppc32-report-chip-version-in-proc-cpuinfo-for-85xx-boards.patch
ppc32: report chip version in /proc/cpuinfo for 85xx boards

ppc32-fix-formatting-of-cds-common-platform-file.patch
ppc32: fix formatting of CDS common platform file

ppc64-remove-unneeded-includes-from-pseries_nvramc.patch
remove unneeded includes from pSeries_nvram.c

ppc64-collect-and-export-low-level-cpu-usage-statistics.patch
ppc64: collect and export low-level cpu usage statistics

ppc64-move-systemcfg-out-of-heads.patch
ppc64: Move systemcfg out of head.S

ppc64-defconfig-updates.patch
ppc64: defconfig updates

ppc64-distribute-export_symbols.patch
ppc64: distribute EXPORT_SYMBOLs

ppc64-implement-a-vdso-and-use-it-for-signal-trampoline.patch
ppc64: Implement a vDSO and use it for signal trampoline

ppc64-generic-hotplug-cpu-support.patch
ppc64: generic hotplug cpu support

ppc64-disable-hmt-for-rs64-cpus.patch
ppc64: disable HMT for RS64 cpus

use-vmlinux-during-make-install-on-ppc64.patch
ppc64: use vmlinux during make install on ppc64

ppc64-functions-to-reserve-performance-monitor-hardware.patch
ppc64: functions to reserve performance monitor hardware

ppc64-reloc_hide.patch

agpgart-allow-multiple-backends-to-be-initialized.patch
agpgart: allow multiple backends to be initialized agpgart-allow-multiple-backends-to-be-initialized fix
agpgart: add bridge assignment missed in agp_allocate_memory x86_64 agp failure fix

agpgart-allow-multiple-backends-to-be-initialized-fix.patch
agpgart-allow-multiple-backends-to-be-initialized-fix

agpgart-add-agp_find_bridge-function.patch
agpgart: add agp_find_bridge function

agpgart-allow-drivers-to-allocate-memory-local-to.patch
agpgart: allow drivers to allocate memory local to the bridge

drm-add-support-for-new-multiple-agp-bridge-agpgart-api.patch
drm: add support for new multiple agp bridge agpgart api

fb-add-support-for-new-multiple-agp-bridge-agpgart-api.patch
fb: add support for new multiple agp bridge agpgart api

agpgart-add-bridge-parameter-to-driver-functions.patch
agpgart: add bridge parameter to driver functions

mips-add-tanbac-tb0219-base-board-driver.patch
mips: add TANBAC TB0219 base board driver

allow-hot-add-enabled-i386-numa-box-to-boot.patch
Allow hot-add enabled i386 NUMA box to boot

refactor-i386-memory-setup.patch
x86: refactor memory setup

consolidate-set_max_mapnr_init-implementations.patch
x86: consolidate set_max_mapnr_init() implementations

remove-free_all_bootmem-define.patch
x86: remove-free_all_bootmem() #define

out-of-line-x86-put_user-implementation.patch
out-of-line x86 "put_user()" implementation

fix-iounmap-and-a-pageattr-memleak-x86-and-x86-64.patch
fix iounmap and a pageattr memleak (x86 and x86-64)

x86_64-dump-stack-in-early-exception.patch
x86_64-dump-stack-in-early-exception

x86_64-hugetlb-fix.patch
x86_64: hugetlb fix

xen-vmm-4-add-ptep_establish_new-to-make-va-available.patch
Xen VMM #4: add ptep_establish_new to make va available

xen-vmm-4-return-code-for-arch_free_page.patch
Xen VMM #4: return code for arch_free_page

xen-vmm-4-return-code-for-arch_free_page-fix.patch
Get rid of arch_free_page() warning

xen-vmm-4-runtime-disable-of-vt-console.patch
Xen VMM #4: runtime disable of VT console

xen-vmm-4-has_arch_dev_mem.patch
Xen VMM #4: HAS_ARCH_DEV_MEM

xen-vmm-4-split-free_irq-into-teardown_irq.patch
Xen VMM #4: split free_irq into teardown_irq

altix-ignore-input-during-early-boot.patch
Altix: Ignore input during early boot

altix-ioc4-serial-driver-support.patch
Altix: ioc4 serial driver support

swsusp-do-not-use-higher-order-memory-allocations-on-suspend.patch
swsusp: do not use higher order memory allocations on suspend

swsusp-do-not-use-higher-order-memory-allocations-on-suspend-fix.patch
swsusp-do-not-use-higher-order-memory-allocations-on-suspend fix

swsusp-do-not-use-higher-order-memory-allocations-on-suspend-fix-fix.patch
swsusp-do-not-use-higher-order-memory-allocations-on-suspend fix fix

m32r-use-generic-bugh.patch
m32r: use generic bug.h

make-sysrq-f-call-oom_kill.patch
make sysrq-F call oom_kill()

allow-admin-to-enable-only-some-of-the-magic-sysrq-functions.patch
Allow admin to enable only some of the Magic-Sysrq functions

fix-partial-sysrq-setting.patch
Fix partial sysrq setting

sort-out-pci_rom_address_enable-vs-ioresource_rom_enable.patch
Sort out PCI_ROM_ADDRESS_ENABLE vs IORESOURCE_ROM_ENABLE

irqpoll.patch
irqpoll

poll-mini-optimisations.patch
poll: mini optimisations

mtrr-size-and-base-debug.patch
mtrr size-and-base debugging

cleanup-vc-array-access.patch
cleanup vc array access

remove-console_macrosh.patch
remove console_macros.h

merge-vt_struct-into-vc_data.patch
merge vt_struct into vc_data

merge-vt_struct-into-vc_data-fix.patch
merge-vt_struct-into-vc_data fix

jbd-journal-overflow-fix-2.patch
jbd: journal overflow fix #2

jbd-fix-against-journal-overflow.patch
JBD: reduce stack and number of journal descriptors

jbd-fix-against-journal-overflow-tidies.patch
jbd-fix-against-journal-overflow-tidies

jbd-log-space-management-optimization.patch
JBD: log space management optimization

factor-out-phase-6-of-journal_commit_transaction.patch
Factor out phase 6 of journal_commit_transaction

ext3-cleanup-1.patch
ext3 cleanup 1

ext3-free-block-accounting-fix.patch
ext3: free block accounting fix

ext3_test_root-speedup.patch
ext3_test_root() speedup

i4l-new-hfc_usb-driver-version.patch
i4l: new hfc_usb driver version

i4l-hfc-4s-and-hfc-8s-driver.patch
i4l: HFC-4S and HFC-8S driver

fix-race-between-the-nmi-code-and-the-cmos-clock.patch
Fix race between the NMI code and the CMOS clock

cant-unmount-bad-inode.patch
Can't unmount bad inode

iounmap-debugging.patch
iounmap debugging

oss-support-for-ac97-low-power-codecs.patch
OSS Support for AC97 low power codecs

fix-kallsyms-insmod-rmmod-race.patch
Fix kallsyms/insmod/rmmod race

fix-kallsyms-insmod-rmmod-race-fix.patch
fix-kallsyms-insmod-rmmod-race fix

fix-kallsyms-insmod-rmmod-race-fix-fix.patch
fix-kallsyms-insmod-rmmod-race-fix-fix

d_drop-should-use-per-dentry-lock.patch
d_drop should use per dentry lock

detect-soft-lockups.patch
detect soft lockups

touch_softlockup_watchdog.patch
touch_softlockup_watchdog()

fix-softlockup-warning-in-swsuspend-resume.patch
fix softlockup warning in swsuspend resume

serialize-access-to-ide-devices.patch
serialize access to ide devices

add-struct-request-end_io-callback.patch
Add struct request end_io callback

add-struct-request-end_io-callback-fix.patch
add-struct-request-end_io-callback fix

rework-core-barrier-support.patch
rework core barrier support

scsi_io_completion-sense-copy.patch
scsi_io_completion sense copy

blk_execute_rq-oops-on-fast-completion.patch
blk_execute_rq() oops on fast completion

annotate-proc-pid-maps-with--markers.patch
annotate /proc/<PID>/maps with [heap]/[stack]/[vdso] markers

serial-add-nec-vr4100-series-serial-support.patch
serial: add NEC VR4100 series serial support

serial-add-the-output-interface-control-to.patch
serial: add the output interface control to VR41xx SIU driver

sys_setpriority-euid-semantics-fix.patch
sys_setpriority() euid semantics fix

add-tcsbrkp-to-compat_ioctlh.patch
add TCSBRKP to compat_ioctl.h

areca-raid-linux-scsi-driver.patch
ARECA RAID Linux scsi driver

areca-raid-linux-scsi-driver-fix.patch
areca-raid-linux-scsi-driver-fix

minor-conceptual-fix-for-proc-kcore-header-size.patch
minor conceptual fix for /proc/kcore header size

add-compiler-gcc4h.patch
add compiler-gcc4.h

rt-lsm.patch
RT-LSM

convert-proc-driver-rtc-to-seq_file.patch
convert /proc/driver/rtc to seq_file.

drivers-char-lpc-race-fix.patch
drivers/char/lp.c race fix

clean-up-and-unify-asm-resourceh-files.patch
clean up and unify asm-*/resource.h files

add-local-bio-pool-support-and-modify-dm.patch
add local bio pool support and modify dm

add-local-bio-pool-support-and-modify-dm-uninline-zero_fill_bio.patch
uninline-zero_fill_bio

add-local-bio-pool-support-and-modify-dm-use-global-bio-set-pool.patch
add-local-bio-pool-support-and-modify-dm: use global bio set pool

fix-ufs-quota.patch
Implement quota reading and writing functions for UFS.

run-softirqs-on-proper-processor-on-offline.patch
Run softirqs on proper processor on offline

aops-based-loop-io.patch
a_ops-based loop I/O

tty-output-lossage-fix.patch
tty output lossage fix

add-timing-information-to-printk-messages.patch
add timing information to printk messages

seccomp.patch
seccomp: secure computing support

seccomp-tidy.patch
seccomp-tidy

minor-bttv-driver-update.patch
minor bttv driver update

tv-tuner-module-update.patch
tv tuner module update.

remove-mount-option-parsing-from-procfs.patch
remove mount option parsing from procfs

credits-update.patch
CREDITS Update

bksend-example-script-fix.patch
bksend example script fix

export-kallsyms_lookup_name.patch
export kallsyms_lookup_name()

add-nobh_writepage-support.patch
Add nobh_writepage() support

add-nobh_writepage-support-tidy.patch
add-nobh_writepage-support-tidy

add-nobh_writepage-support-fix.patch
add-nobh_writepage-support fix

fix-1-wire-dallas-in-bigendian-machines.patch
Fix 1-Wire Dallas in bigendian machines

fix-futex-mmap_sem-deadlock.patch
Fix futex mmap_sem deadlock

base-small-introduce-the-config_base_small-flag.patch
base-small: introduce the CONFIG_BASE_SMALL flag

base-small-shrink-chrdevs-hash.patch
base-small: shrink chrdevs hash

base-small-shrink-pid-tables.patch
base-small: shrink PID tables

base-small-shrink-uid-hash.patch
base-small: shrink UID hash

base-small-shrink-futex-queues.patch
base-small: shrink futex queues

base-small-shrink-timer-hashes.patch
base-small: shrink timer hashes

base-small-shrink-console-buffer.patch
base-small: shrink console buffer

lib-sort-heapsort-implementation-of-sort.patch
lib/sort: Heapsort implementation of sort()

sort-fix.patch
sort fix

sort-export.patch
sort export

sort-build-fix.patch
sort build fix

lib-sort-turn-off-self-test.patch
lib/sort: turn off self-test

lib-sort-replace-qsort-in-xfs.patch
lib/sort: Replace qsort in XFS

lib-sort-replace-insertion-sort-in-exception-tables.patch
lib/sort: Replace insertion sort in exception tables

lib-sort-replace-insertion-sort-in-ia64-exception-tables.patch
lib/sort: Replace insertion sort in IA64 exception tables

lib-sort-use-generic-sort-on-x86_64.patch
lib/sort: Use generic sort on x86_64

inotify.patch
inotify

random-pt2-cleanup-waitqueue-logic-fix-missed-wakeup.patch
random: cleanup waitqueue logic, fix missed wakeup

random-pt2-kill-pool-clearing.patch
random: kill pool clearing

random-pt2-combine-legacy-ioctls.patch
random: combine legacy ioctls

random-pt2-re-init-all-pools-on-zero.patch
random: re-init all pools on zero

random-pt2-simplify-initialization.patch
random: simplify initialization

random-pt2-kill-memsets-of-static-data.patch
random: kill memsets of static data

random-pt2-kill-dead-extract_state-struct.patch
random: kill dead extract_state struct

random-pt2-kill-22-compat-waitqueue-defs.patch
random: kill 2.2 compat waitqueue defs

random-pt2-kill-redundant-rotate_left-definitions.patch
random: kill redundant rotate_left definitions

random-pt2-kill-redundant-rotate_left-definitions-fix.patch
rol32 thinko

random-pt2-kill-misnamed-log2.patch
random: kill misnamed log2

random-pt3-more-meaningful-pool-names.patch
random: More meaningful pool names

random-pt3-static-allocation-of-pools.patch
random: Static allocation of pools

random-pt3-static-sysctl-bits.patch
random: Static sysctl bits

random-pt3-catastrophic-reseed-checks.patch
random: Catastrophic reseed checks

random-pt3-entropy-reservation-accounting.patch
random: Entropy reservation accounting

random-pt3-reservation-flag-in-pool-struct.patch
random: Reservation flag in pool struct

random-pt3-reseed-pointer-in-pool-struct.patch
random: Reseed pointer in pool struct

random-pt3-break-up-extract_user.patch
random: Break up extract_user

random-pt3-remove-dead-md5-copy.patch
random: Remove dead MD5 copy

random-pt3-simplify-hash-folding.patch
random: Simplify hash folding

random-pt3-clean-up-hash-buffering.patch
random: Clean up hash buffering

random-pt3-remove-entropy-batching.patch
random: Remove entropy batching

random-pt4-create-new-rol32-ror32-bitops.patch
random: Create new rol32/ror32 bitops

random-pt4-use-them-throughout-the-tree.patch
random: Use them throughout the tree

random-pt4-kill-the-sha-variants.patch
random: Kill the SHA variants

random-pt4-cleanup-sha-interface.patch
random: Cleanup SHA interface

random-pt4-move-sha-code-to-lib.patch
random: Move SHA code to lib/

random-pt4-replace-sha-with-faster-version.patch
random: Replace SHA with faster version

random-pt4-replace-sha-with-faster-version-fix.patch
random-pt4-replace-sha-with-faster-version-fix

random-pt4-replace-sha-with-faster-version-fix-fix.patch
SHA1 clarify kerneldoc

random-pt4-replace-sha-with-faster-version-fix-fix-fix.patch
random-pt4-cleanup-sha-interface fix

random-pt4-update-cryptolib-to-use-sha-fro-lib.patch
random: Update cryptolib to use SHA fro lib

random-pt4-move-halfmd4-to-lib.patch
random: Move halfmd4 to lib

random-pt4-kill-duplicate-halfmd4-in-ext3-htree.patch
random: Kill duplicate halfmd4 in ext3 htree

random-pt4-kill-duplicate-halfmd4-in-ext3-htree-fix.patch
random-pt4-kill-duplicate-halfmd4-in-ext3-htree-fix

random-pt4-simplify-and-shrink-syncookie-code.patch
random: Simplify and shrink syncookie code

random-pt4-move-syncookies-to-net.patch
random: Move syncookies to net/

speedup-proc-pid-maps.patch
Speed up /proc/pid/maps

speedup-proc-pid-maps-fix.patch
Speed up /proc/pid/maps fix

speedup-proc-pid-maps-fix-fix.patch
speedup-proc-pid-maps fix fix

speedup-proc-pid-maps-fix-fix-fix.patch
speedup /proc/<pid>/maps(4th version)

fix-loss-of-records-on-size-4096-in-proc-pid-maps.patch
fix loss of records on size > 4096 in proc/<pid>/maps

speedup-proc-pid-maps-fix-fix-fix-fix.patch
speedup-proc-pid-maps-fix-fix-fix fix

posix-timers-tidy-up-clock-interfaces-and-consolidate-dispatch-logic.patch
posix-timers: tidy up clock interfaces and consolidate dispatch logic

posix-timers-high-resolution-cpu-clocks-for-posix-clock_-syscalls.patch
posix-timers: high-resolution CPU clocks for POSIX clock_* syscalls

posix-timers-tidy-up-clock-interfaces-and-consolidate-dispatch-logic-cleanup.patch
posix-timers: tidy up clock interfaces and consolidate dispatch logic cleanup

posix-timers-fix-posix-timers-signals-lock-order.patch
posix-timers: fix posix-timers signals lock order

posix-timers-cpu-clock-support-for-posix-timers.patch
posix-timers: CPU clock support for POSIX timers

posix-timers-cpu-clock-support-for-posix-timers-fix.patch
posix-timers: CPU clock support for POSIX timers (fix)

posix-timers-cpu-clock-support-for-posix-timers-fix2.patch
Fix lockup in sys_timer_settime

panic-in-check_process_timers.patch
PANIC in check_process_timers()

make-itimer_real-per-process.patch
make ITIMER_REAL per-process

make-itimer_prof-itimer_virtual-per-process.patch
make ITIMER_PROF, ITIMER_VIRTUAL per-process

make-rlimit_cpu-sigxcpu-per-process.patch
make RLIMIT_CPU/SIGXCPU per-process

pcmcia-update-vrc4171_card.patch
pcmcia: update vrc4171_card

pcmcia-yenta_socket-ti4150-support.patch
pcmcia: yenta_socket - ti4150 support

pcmcia-pd6729-convert-to-pci_register_driver.patch
pcmcia: pd6729 - convert to pci_register_driver()

pcmcia-rsrc_nonstatic-sysfs-output.patch
pcmcia: rsrc_nonstatic: sysfs output

pcmcia-rsrc_nonstatic-sysfs-input.patch
pcmcia: rsrc_nonstatic: sysfs input

pcmcia-mark-resource-setup-as-done.patch
pcmcia: mark resource setup as done

pcmcia-pcmcia_device_probe.patch
pcmcia: pcmcia_device_probe

pcmcia-pcmcia_device_remove.patch
pcmcia: pcmcia_device_remove

pcmcia-pcmcia_device_add.patch
pcmcia: pcmcia_device_add

pcmcia-use-bus_rescan_devices.patch
pcmcia: use bus_rescan_devices

pcmcia-add-pcmcia-devices-autonomously.patch
pcmcia: add pcmcia devices autonomously

pcmcia-determine-some-useful-information-about-devices.patch
pcmcia: determine some useful information about devices

pcmcia-per-device-sysfs-output.patch
pcmcia: per-device sysfs output

nfs-fix_vfsflock.patch
VFS: Fix structure initialization in locks_remove_flock()

nfs-flock.patch
NFS: Add emulation of BSD flock() in terms of POSIX locks on the server

nfsacl-return-enosys-for-rpc-programs-that-are-unavailable.patch
nfsacl: return -ENOSYS for RPC programs that are unavailable

nfsacl-add-missing-eopnotsupp-=-nfs3err_notsupp-mapping-in-nfsd.patch
nfsacl: add missing -EOPNOTSUPP => NFS3ERR_NOTSUPP mapping in nfsd

nfsacl-allow-multiple-programs-to-listen-on-the-same-port.patch
nfsacl: allow multiple programs to listen on the same port

nfsacl-allow-multiple-programs-to-share-the-same-transport.patch
nfsacl: allow multiple programs to share the same transport

nfsacl-lazy-rpc-receive-buffer-allocation.patch
nfsacl: lazy RPC receive buffer allocation

nfsacl-encode-and-decode-arbitrary-xdr-arrays.patch
nfsacl: encode and decode arbitrary XDR arrays

nfsacl-encode-and-decode-arbitrary-xdr-arrays-fix.patch
nfsacl-encode-and-decode-arbitrary-xdr-arrays-fix

nfsacl-encode-and-decode-arbitrary-xdr-arrays-fix2.patch
nfsacl-encode-and-decode-arbitrary-xdr-arrays-fix2

nfsacl-add-noacl-nfs-mount-option.patch
nfsacl: add noacl nfs mount option

nfsacl-infrastructure-and-server-side-of-nfsacl.patch
nfsacl: infrastructure and server side of nfsacl

nfsv4-deamon-always-supports-acls.patch
NFSv4 deamon always supports acls

lib-sort-replace-qsort-in-nfs-acl-code.patch
lib/sort: Replace qsort in NFS ACL code

nfsacl-infrastructure-and-server-side-of-nfsacl-fix.patch
nfsacl-infrastructure-and-server-side-of-nfsacl fix

nfsacl-solaris-nfsacl-workaround.patch
nfsacl: solaris nfsacl workaround

nfsacl-client-side-of-nfsacl.patch
nfsacl: client side of nfsacl

nfsacl-client-side-of-nfsacl-fix.patch
nfsacl: Must not initialize inode->i_op to NULL

nfsacl-acl-umask-handling-workaround-in-nfs-client.patch
nfsacl: aCL umask handling workaround in nfs client

nfsacl-acl-umask-handling-workaround-in-nfs-client-fix.patch
ACL umask handling workaround in nfs client fix

nfsacl-cache-acls-on-the-nfs-client-side.patch
nfsacl: cache acls on the nfs client side

nfs-acl-build-fix-posix-acl-config-tidy.patch
NFS ACL build fix, POSIX ACL config tidy
Include FS_POSIX_ACL if nfs server needs it

nfsacl-return-enosys-for-rpc-programs-that-are-unavailable-fix.patch
nfsacl-return-enosys-for-rpc-programs-that-are-unavailable fix

kgdb-ga.patch
kgdb stub for ia32 (George Anzinger's one)
kgdbL warning fix
kgdb buffer overflow fix
kgdbL warning fix
kgdb: CONFIG_DEBUG_INFO fix
x86_64 fixes
correct kgdb.txt Documentation link (against 2.6.1-rc1-mm2)
kgdb: fix for recent gcc
kgdb warning fixes
THREAD_SIZE fixes for kgdb
Fix stack overflow test for non-8k stacks kgdb-ga.patch fix for i386 single-step into sysenter fix TRAP_BAD_SYSCALL_EXITS on i386
add TRAP_BAD_SYSCALL_EXITS config for i386 kgdb-is-incompatible-with-kprobes kgdb-ga-build-fix
kgdb-ga-fixes
kgdb: kill off highmem_start_page

kgdb-documentation-fix.patch
kgdb documentation fix

kgdboe-netpoll.patch
kgdb-over-ethernet via netpoll
kgdboe: fix configuration of MAC address

kgdb-x86_64-support.patch
kgdb-x86_64-support.patch for 2.6.2-rc1-mm3
kgdb-x86_64-warning-fixes
kgdb-x86_64-fix
kgdb-x86_64-serial-fix
kprobes exception notifier fix

dev-mem-restriction-patch.patch
/dev/mem restriction patch

dev-mem-restriction-patch-allow-reads.patch
dev-mem-restriction-patch: allow reads

journal_add_journal_head-debug.patch
journal_add_journal_head-debug

list_del-debug.patch
list_del debug check

page-owner-tracking-leak-detector.patch
Page owner tracking leak detector

make-page_owner-handle-non-contiguous-page-ranges.patch
make page_owner handle non-contiguous page ranges

unplug-can-sleep.patch
unplug functions can sleep

firestream-warnings.patch
firestream warnings

periodically-scan-redzone-entries-and-slab-control-structures.patch
periodically scan redzone entries and slab control structures

perfctr-core.patch
perfctr: core
perfctr: remove bogus perfctr_sample_thread() calls

perfctr-i386.patch
perfctr: i386

perfctr-x86-core-updates.patch
perfctr x86 core updates

perfctr-x86-driver-updates.patch
perfctr x86 driver updates

perfctr-x86-driver-cleanup.patch
perfctr: x86 driver cleanup

perfctr-prescott-fix.patch
Prescott fix for perfctr

perfctr-x86-update-2.patch
perfctr x86 update 2

perfctr-x86_64.patch
perfctr: x86_64

perfctr-x86_64-core-updates.patch
perfctr x86_64 core updates

perfctr-ppc.patch
perfctr: PowerPC

perfctr-ppc32-driver-update.patch
perfctr: ppc32 driver update

perfctr-ppc32-mmcr0-handling-fixes.patch
perfctr ppc32 MMCR0 handling fixes

perfctr-ppc32-update.patch
perfctr ppc32 update

perfctr-ppc32-update-2.patch
perfctr ppc32 update

perfctr-virtualised-counters.patch
perfctr: virtualised counters

perfctr-remap_page_range-fix.patch

virtual-perfctr-illegal-sleep.patch
virtual perfctr illegal sleep

make-perfctr_virtual-default-in-kconfig-match-recommendation.patch
Make PERFCTR_VIRTUAL default in Kconfig match recommendation in help text

perfctr-ifdef-cleanup.patch
perfctr ifdef cleanup

perfctr-update-2-6-kconfig-related-updates.patch
perfctr: Kconfig-related updates

perfctr-virtual-updates.patch
perfctr virtual updates

perfctr-virtual-cleanup.patch
perfctr: virtual cleanup

perfctr-ppc32-preliminary-interrupt-support.patch
perfctr ppc32 preliminary interrupt support

perfctr-update-5-6-reduce-stack-usage.patch
perfctr: reduce stack usage

perfctr-interrupt-support-kconfig-fix.patch
perfctr interrupt_support Kconfig fix

perfctr-low-level-documentation.patch
perfctr low-level documentation

perfctr-inheritance-1-3-driver-updates.patch
perfctr inheritance: driver updates

perfctr-inheritance-2-3-kernel-updates.patch
perfctr inheritance: kernel updates

perfctr-inheritance-3-3-documentation-updates.patch
perfctr inheritance: documentation updates

perfctr-inheritance-locking-fix.patch
perfctr inheritance locking fix

perfctr-api-changes-first-step.patch
perfctr API changes: first step

perfctr-virtual-update.patch
perfctr virtual update

perfctr-x86-64-ia32-emulation-fix.patch
perfctr x86-64 ia32 emulation fix

perfctr-sysfs-update-1-4-core.patch
perfctr sysfs update: core

perfctr-sysfs-update.patch
Perfctr sysfs update

perfctr-sysfs-update-2-4-x86.patch
perfctr sysfs update: x86

perfctr-sysfs-update-3-4-x86-64.patch
perfctr sysfs update: x86-64
perfctr: syscall numbers in x86-64 ia32-emulation perfctr x86_64 native syscall numbers fix

perfctr-sysfs-update-4-4-ppc32.patch
perfctr sysfs update: ppc32

perfctr-2710-api-update-1-4-common.patch
perfctr-2.7.10 API update 1/4: common

perfctr-2710-api-update-2-4-i386.patch
perfctr-2.7.10 API update 2/4: i386

perfctr-2710-api-update-3-4-x86_64.patch
perfctr-2.7.10 API update 3/4: x86_64

perfctr-2710-api-update-4-4-ppc32.patch
perfctr-2.7.10 API update 4/4: ppc32

add-do_proc_doulonglongvec_minmax-to-sysctl-functions.patch
Add do_proc_doulonglongvec_minmax to sysctl functions add-do_proc_doulonglongvec_minmax-to-sysctl-functions-fix add-do_proc_doulonglongvec_minmax-to-sysctl-functions fix 2

add-sysctl-interface-to-sched_domain-parameters.patch
Add sysctl interface to sched_domain parameters

allow-modular-ide-pnp.patch
allow modular ide-pnp

allow-x86_64-to-reenable-interrupts-on-contention.patch
Allow x86_64 to reenable interrupts on contention

i386-cpu-hotplug-updated-for-mm.patch
i386 CPU hotplug updated for -mm

ppc64-fix-cpu-hotplug.patch
ppc64: fix hotplug cpu

disable-atykb-warning.patch
disable atykb "too many keys pressed" warning

export-file_ra_state_init-again.patch
Export file_ra_state_init() again

cachefs-filesystem.patch
CacheFS filesystem

numa-policies-for-file-mappings-mpol_mf_move-cachefs.patch
numa-policies-for-file-mappings-mpol_mf_move for cachefs

cachefs-release-search-records-lest-they-return-to-haunt-us.patch
CacheFS: release search records lest they return to haunt us

fix-64-bit-problems-in-cachefs.patch
Fix 64-bit problems in cachefs

cachefs-fixed-typos-that-cause-wrong-pointer-to-be-kunmapped.patch
cachefs: fixed typos that cause wrong pointer to be kunmapped

cachefs-return-the-right-error-upon-invalid-mount.patch
CacheFS: return the right error upon invalid mount

fix-cachefs-barrier-handling-and-other-kernel-discrepancies.patch
Fix CacheFS barrier handling and other kernel discrepancies

remove-error-from-linux-cachefsh.patch
Remove #error from linux/cachefs.h

cachefs-warning-fix-2.patch
cachefs warning fix 2

cachefs-linkage-fix-2.patch
cachefs linkage fix

cachefs-build-fix.patch
cachefs build fix

cachefs-documentation.patch
CacheFS documentation

add-page-becoming-writable-notification.patch
Add page becoming writable notification

add-page-becoming-writable-notification-fix.patch
do_wp_page_mk_pte_writable() fix

add-page-becoming-writable-notification-build-fix.patch
add-page-becoming-writable-notification build fix

provide-a-filesystem-specific-syncable-page-bit.patch
Provide a filesystem-specific sync'able page bit

provide-a-filesystem-specific-syncable-page-bit-fix.patch
provide-a-filesystem-specific-syncable-page-bit-fix

provide-a-filesystem-specific-syncable-page-bit-fix-2.patch
provide-a-filesystem-specific-syncable-page-bit-fix-2

make-afs-use-cachefs.patch
Make AFS use CacheFS

afs-cachefs-dependency-fix.patch
afs-cachefs-dependency-fix

split-general-cache-manager-from-cachefs.patch
Split general cache manager from CacheFS

turn-cachefs-into-a-cache-backend.patch
Turn CacheFS into a cache backend

rework-the-cachefs-documentation-to-reflect-fs-cache-split.patch
Rework the CacheFS documentation to reflect FS-Cache split

update-afs-client-to-reflect-cachefs-split.patch
Update AFS client to reflect CacheFS split

x86-rename-apic_mode_exint.patch
kexec: x86: rename APIC_MODE_EXINT

x86-local-apic-fix.patch
kexec: x86: local apic fix

x86_64-e820-64bit.patch
kexec: x86_64: e820 64bit fix

x86-i8259-shutdown.patch
kexec: x86: i8259 shutdown: disable interrupts

x86_64-i8259-shutdown.patch
kexec: x86_64: add i8259 shutdown method

x86-apic-virtwire-on-shutdown.patch
kexec: x86: resture apic virtual wire mode on shutdown

x86_64-apic-virtwire-on-shutdown.patch
kexec: x86_64: restore apic virtual wire mode on shutdown

vmlinux-fix-physical-addrs.patch
kexec: vmlinux: fix physical addresses

x86-vmlinux-fix-physical-addrs.patch
kexec: x86: vmlinux: fix physical addresses

x86_64-vmlinux-fix-physical-addrs.patch
kexec: x86_64: vmlinux: fix physical addresses

x86_64-entry64.patch
kexec: x86_64: add 64-bit entry

x86-config-kernel-start.patch
kexec: x86: add CONFIG_PYSICAL_START

x86_64-config-kernel-start.patch
kexec: x86_64: add CONFIG_PHYSICAL_START

kexec-kexec-generic.patch
kexec: add kexec syscalls

kexec-kexec-generic-kexec-use-unsigned-bitfield.patch
kexec: use unsigned bitfield

x86-machine_shutdown.patch
kexec: x86: factor out apic shutdown code

x86-kexec.patch
kexec: x86 kexec core

x86-crashkernel.patch
crashdump: x86 crashkernel option

x86_64-machine_shutdown.patch
kexec: x86_64: factor out apic shutdown code

x86_64-kexec.patch
kexec: x86_64 kexec implementation

x86_64-crashkernel.patch
crashdump: x86_64: crashkernel option

kexec-ppc-support.patch
kexec: kexec ppc support

x86-crash_shutdown-nmi-shootdown.patch
crashdump: x86: add NMI handler to capture other CPUs

x86-crash_shutdown-snapshot-registers.patch
kexec: x86: snapshot registers during crash shutdown

x86-crash_shutdown-apic-shutdown.patch
kexec: x86 shutdown APICs during crash_shutdown

crashdump-documentation.patch
crashdump: documentation

crashdump-memory-preserving-reboot-using-kexec.patch
crashdump: memory preserving reboot using kexec

crashdump-routines-for-copying-dump-pages.patch
crashdump: routines for copying dump pages

crashdump-routines-for-copying-dump-pages-fixes.patch
crashdump-routines-for-copying-dump-pages-fixes

crashdump-elf-format-dump-file-access.patch
crashdump: elf format dump file access

crashdump-linear-raw-format-dump-file-access.patch
crashdump: linear raw format dump file access

crashdump-linear-raw-format-dump-file-access-coding-style.patch
crashdump-linear-raw-format-dump-file-access-coding-style

new-bitmap-list-format-for-cpusets.patch
new bitmap list format (for cpusets)

cpusets-big-numa-cpu-and-memory-placement.patch
cpusets - big numa cpu and memory placement

cpusets-config_cpusets-depends-on-smp.patch
Cpusets: CONFIG_CPUSETS depends on SMP

cpusets-move-cpusets-above-embedded.patch
move CPUSETS above EMBEDDED

cpusets-fix-cpuset_get_dentry.patch
cpusets : fix cpuset_get_dentry()

cpusets-fix-race-in-cpuset_add_file.patch
cpusets: fix race in cpuset_add_file()

cpusets-remove-more-casts.patch
cpusets: remove more casts

cpusets-make-config_cpusets-the-default-in-sn2_defconfig.patch
cpusets: make CONFIG_CPUSETS the default in sn2_defconfig

cpusets-document-proc-status-allowed-fields.patch
cpusets: document proc status allowed fields

cpusets-dont-export-proc_cpuset_operations.patch
Cpusets - Dont export proc_cpuset_operations

cpusets-display-allowed-masks-in-proc-status.patch
cpusets: display allowed masks in proc status

cpusets-simplify-cpus_allowed-setting-in-attach.patch
cpusets: simplify cpus_allowed setting in attach

cpusets-remove-useless-validation-check.patch
cpusets: remove useless validation check

cpusets-tasks-file-simplify-format-fixes.patch
Cpusets tasks file: simplify format, fixes

lib-sort-replace-open-coded-opids2-bubblesort-in-cpusets.patch
lib/sort: Replace open-coded O(pids**2) bubblesort in cpusets

cpusets-simplify-memory-generation.patch
Cpusets: simplify memory generation

cpusets-interoperate-with-hotplug-online-maps.patch
cpusets: interoperate with hotplug online maps

cpusets-alternative-fix-for-possible-race-in.patch
cpusets: alternative fix for possible race in cpuset_tasks_read()

cpusets-remove-casts.patch
cpusets: remove void* typecasts

reiser4-sb_sync_inodes.patch
reiser4: vfs: add super_operations.sync_inodes()

reiser4-allow-drop_inode-implementation.patch
reiser4: export vfs inode.c symbols

reiser4-truncate_inode_pages_range.patch
reiser4: vfs: add truncate_inode_pages_range()

reiser4-export-remove_from_page_cache.patch
reiser4: export pagecache add/remove functions to modules

reiser4-export-page_cache_readahead.patch
reiser4: export page_cache_readahead to modules

reiser4-reget-page-mapping.patch
reiser4: vfs: re-check page->mapping after calling try_to_release_page()

reiser4-rcu-barrier.patch
reiser4: add rcu_barrier() synchronization point

reiser4-export-inode_lock.patch
reiser4: export inode_lock to modules

reiser4-export-pagevec-funcs.patch
reiser4: export pagevec functions to modules

reiser4-export-radix_tree_preload.patch
reiser4: export radix_tree_preload() to modules

reiser4-export-find_get_pages.patch

reiser4-radix-tree-tag.patch
reiser4: add new radix tree tag

reiser4-radix_tree_lookup_slot.patch
reiser4: add radix_tree_lookup_slot()

reiser4-perthread-pages.patch
reiser4: per-thread page pools

reiser4-include-reiser4.patch
reiser4: add to build system

reiser4-doc.patch
reiser4: documentation

reiser4-only.patch
reiser4: main fs

reiser4-recover-read-performance.patch
reiser4: recover read performance

reiser4-export-find_get_pages_tag.patch
reiser4-export-find_get_pages_tag

reiser4-add-missing-context.patch

add-acpi-based-floppy-controller-enumeration.patch
Add ACPI-based floppy controller enumeration.

possible-dcache-bug-debugging-patch.patch
Possible dcache BUG: debugging patch

serial-add-support-for-non-standard-xtals-to-16c950-driver.patch
serial: add support for non-standard XTALs to 16c950 driver

add-support-for-possio-gcc-aka-pcmcia-siemens-mc45.patch
Add support for Possio GCC AKA PCMCIA Siemens MC45

generic-serial-cli-conversion.patch
generic-serial cli() conversion

specialix-io8-cli-conversion.patch
Specialix/IO8 cli() conversion

sx-cli-conversion.patch
SX cli() conversion

au1x00_uart-deadlock-fix.patch
au1x00_uart deadlock fix

revert-allow-oem-written-modules-to-make-calls-to-ia64-oem-sal-functions.patch
revert "allow OEM written modules to make calls to ia64 OEM SAL functions"

md-add-interface-for-userspace-monitoring-of-events.patch
md: add interface for userspace monitoring of events.

remove-lock_section-from-x86_64-spin_lock-asm.patch
remove LOCK_SECTION from x86_64 spin_lock asm

kfree_skb-dump_stack.patch
kfree_skb-dump_stack

cancel_rearming_delayed_work.patch
cancel_rearming_delayed_work()

ipvs-deadlock-fix.patch
ipvs deadlock fix

minimal-ide-disk-updates.patch
Minimal ide-disk updates

use-find_trylock_page-in-free_swap_and_cache-instead-of-hand-coding.patch
use find_trylock_page in free_swap_and_cache instead of hand coding

radeonfb-fix-spurious-error-return-in-fbio_radeon_set_mirror.patch
radeonfb: Fix spurious error return in FBIO_RADEON_SET_MIRROR

w100fb-make-blanking-function-interrupt-safe.patch
w100fb: Make blanking function interrupt safe

kyrofb-copy__user-return-value-checks-added-to-kyro-fb.patch
kyrofb: copy_*_user return value checks added to kyro fb

skeletonfb-documentation-fixes.patch
skeletonfb: Documentation fixes

intelfb-add-partial-support-915g-chipset.patch
intelfb: Add partial support 915G chipset

sisfb_compat_ioctl-warning-fix.patch
fbdev compat_ioctl warning fix

sis-warning-fix.patch
sis warning fix

tridentfbc-make-some-code-static.patch
tridentfb.c: make some code static

tridentfb-warning-fix.patch
tridentfb warning fix

intelfb-vesa_modes-require-config_fb_modehelpers.patch
intelfb: vesa_modes require CONFIG_FB_MODEHELPERS

fbdev-make-fb_find_mode-return-failure-if-modular.patch
fbdev: Make fb_find_mode() return failure if modular

fbdev-logo-code-fixes.patch
fbdev: Logo code fixes

fbdev-kbuild-cleanups.patch
fbdev: Kbuild cleanups

geodefb-add-geode-framebuffer-driver.patch
geodefb: Add Geode framebuffer driver

nvidiafb-add-update-framebuffer-driver-for-nvidia-chipsets.patch
nvidiafb: Add update framebuffer driver for nVidia chipsets

fbdev-generic-drawing-function-cleanups.patch
fbdev: Generic drawing function cleanups

fbdev-generic-drawing-function-cleanups-fix.patch
c~fbdev-generic-drawing-function-cleanups-fix

md-fix-multipath-assembly-bug.patch
md: fix multipath assembly bug

md-raid-kconfig-cleanups-remove-experimental-tag-from-raid-6.patch
md: RAID Kconfig cleanups, remove experimental tag from RAID-6

md-remove-possible-oops-in-md-raid1.patch
md: remove possible oops in md/raid1

md-make-raid5-and-raid6-robust-against-failure-during-recovery.patch
md: make raid5 and raid6 robust against failure during recovery.

md-remove-kludgy-level-check-from-mdc.patch
md: remove kludgy level check from md.c

md-merge-md_enter_safemode-into-md_check_recovery.patch
md: merge md_enter_safemode into md_check_recovery

md-improve-locking-on-safemode-and-move-superblock-writes.patch
md: improve locking on 'safemode' and move superblock writes

md-improve-the-interface-to-sync_request.patch
md: improve the interface to sync_request

md-optimised-resync-using-bitmap-based-intent-logging.patch
md: optimised resync using Bitmap based intent logging

md-optimised-resync-using-bitmap-based-intent-logging-fix.patch
md-optimised-resync-using-bitmap-based-intent-logging fix

md-raid1-support-for-bitmap-intent-logging.patch
md: raid1 support for bitmap intent logging

md-optimise-reconstruction-when-re-adding-a-recently-failed-drive.patch
md: optimise reconstruction when re-adding a recently failed drive.

device-mapper-store-name-directly-against-device.patch
device-mapper: Store name directly against device

device-mapper-record-restore-bio-state.patch
device-mapper: Record & restore bio state.

device-mapper-export-map_info.patch
device-mapper: Export map_info

device-mapper-multipath.patch
device-mapper: multipath

device-mapper-multipath-round-robin-path-selector.patch
device-mapper: multipath round-robin path selector.

device-mapper-multipath-hardware-handler.patch
device-mapper: multipath hardware handler

device-mapper-multipath-hardware-handler-for-emc.patch
device-mapper: multipath hardware handler for EMC

device-mapper-tag-multipath-exports-gpl.patch
device-mapper: tag multipath exports GPL

device-mapper-some-code-formatting-cleanups.patch
device-mapper: Some code/formatting cleanups

device-mapper-some-multipath-fn-renames.patch
device-mapper: Some multipath fn renames

figure-out-who-is-inserting-bogus-modules.patch
Figure out who is inserting bogus modules

detect-atomic-counter-underflows.patch
detect atomic counter underflows

update-documentation-filesystems-locking.patch
Update Documentation/filesystems/Locking

post-halloween-doc.patch
post halloween doc

fuse-maintainers-kconfig-and-makefile-changes.patch
Subject: [PATCH 1/11] FUSE - MAINTAINERS, Kconfig and Makefile changes

fuse-core.patch
Subject: [PATCH 2/11] FUSE - core

fuse-device-functions.patch
Subject: [PATCH 3/11] FUSE - device functions

fuse-device-functions-fix-race-in-interrupted-request.patch
fuse: fix race in interrupted request

fuse-device-functions-fix.patch
fuse: better error reporting in fuse_fill_super

fuse-fix-llseek-on-device.patch
FUSE: fix llseek on device

fuse-make-two-functions-static.patch
fuse: make two functions static

fuse-fix-variable-with-confusing-name.patch
fuse: fix variable with confusing name

fuse-read-only-operations.patch
Subject: [PATCH 4/11] FUSE - read-only operations

fuse-read-write-operations.patch
Subject: [PATCH 5/11] FUSE - read-write operations

fuse-read-write-operations-fix.patch
fuse: fix hard link operation

fuse-file-operations.patch
Subject: [PATCH 6/11] FUSE - file operations

fuse-mount-options.patch
Subject: [PATCH 7/11] FUSE - mount options

fuse-dont-check-against-zero-fsuid.patch
fuse: don't check against zero fsuid

fuse-remove-mount_max-and-user_allow_other-module-parameters.patch
fuse: remove mount_max and user_allow_other module parameters

fuse-extended-attribute-operations.patch
Subject: [PATCH 8/11] FUSE - extended attribute operations

fuse-readpages-operation.patch
Subject: [PATCH 9/11] FUSE - readpages operation

fuse-nfs-export.patch
Subject: [PATCH 10/11] FUSE - NFS export

fuse-direct-i-o.patch
Subject: [PATCH 11/11] FUSE - direct I/O

fuse-transfer-readdir-data-through-device.patch
fuse: transfer readdir data through device

cryptoapi-prepare-for-processing-multiple-buffers-at.patch
CryptoAPI: prepare for processing multiple buffers at a time

cryptoapi-update-padlock-to-process-multiple-blocks-at.patch
CryptoAPI: Update PadLock to process multiple blocks at once

update-email-address-of-andrea-arcangeli.patch
update email address of Andrea Arcangeli

compile-error-blackbird_load_firmware.patch
blackbird_load_firmware compile fix

i386-x86_64-apicc-make-two-functions-static.patch
i386/x86_64 apic.c: make two functions static

i386-cyrixc-make-a-function-static.patch
i386 cyrix.c: make a function static

mtrr-some-cleanups.patch
mtrr: some cleanups

i386-cpu-commonc-some-cleanups.patch
i386 cpu/common.c: some cleanups

i386-cpuidc-make-two-functions-static.patch
i386 cpuid.c: make two functions static

i386-efic-make-some-code-static.patch
i386 efi.c: make some code static

i386-x86_64-io_apicc-misc-cleanups.patch
i386/x86_64 io_apic.c: misc cleanups

i386-mpparsec-make-mp_processor_info-static.patch
i386 mpparse.c: make MP_processor_info static

i386-x86_64-msrc-make-two-functions-static.patch
i386/x86_64 msr.c: make two functions static

3w-abcdh-tw_device_extension-remove-an-unused-filed.patch
3w-abcd.h: TW_Device_Extension: remove an unused field

hpet-make-some-code-static.patch
hpet: make some code static

26-patch-i386-trapsc-make-a-function-static.patch
i386 traps.c: make a function static

i386-semaphorec-make-4-functions-static.patch
i386 semaphore.c: make 4 functions static

kill-aux_device_present.patch
kill aux_device_present

i386-setupc-make-4-variables-static.patch
i386 setup.c: make 4 variables static

mostly-i386-mm-cleanup.patch
(mostly i386) mm cleanup

update-email-address-of-benjamin-lahaise.patch
Update email address of Benjamin LaHaise

update-email-address-of-philip-blundell.patch
Update email address of Philip Blundell

kernel-acctc-make-a-function-static.patch
kernel/acct.c: make a function static

kernel-auditc-make-some-functions-static.patch
kernel/audit.c: make some functions static

kernel-capabilityc-make-a-spinlock-static.patch
kernel/capability.c: make a spinlock static

mm-thrashc-make-a-variable-static.patch
mm/thrash.c: make a variable static

lib-kernel_lockc-make-kernel_sem-static.patch
lib/kernel_lock.c: make kernel_sem static

saa7146_vv_ksymsc-remove-two-unused-export_symbol_gpls.patch
saa7146_vv_ksyms.c: remove two unused EXPORT_SYMBOL_GPL's

fix-placement-of-static-inline-in-nfsdh.patch
fix placement of static inline in nfsd.h

drivers-block-umemc-make-two-functions-static.patch
drivers/block/umem.c: make two functions static

drivers-block-xdc-make-a-variable-static.patch
drivers/block/xd.c: make a variable static

kernel-forkc-make-mm_cachep-static.patch
kernel/fork.c: make mm_cachep static

kernel-forkc-make-mm_cachep-static-fix.patch
kernel-forkc-make-mm_cachep-static fix

mm-page-writebackc-remove-an-unused-function.patch
mm/page-writeback.c: remove an unused function

mm-shmemc-make-a-struct-static.patch
mm/shmem.c: make a struct static

misc-isapnp-cleanups.patch
misc ISAPNP cleanups

some-pnp-cleanups.patch
some PNP cleanups

if-0-cx88_risc_disasm.patch
#if 0 cx88_risc_disasm

make-loglevels-in-init-mainc-a-little-more-sane.patch
Make loglevels in init/main.c a little more sane.

isicom-use-null-for-pointer.patch
sparse: use NULL for pointer

remove-bouncing-email-address-of-hennus-bergman.patch
remove bouncing email address of Hennus Bergman

cirrusfbc-make-some-code-static.patch
cirrusfb.c: make some code static

matroxfb_basec-make-some-code-static.patch
matroxfb_base.c: make some code static

matroxfb_basec-make-some-code-static-fix.patch
matroxfb_basec-make-some-code-static fix

asiliantfbc-make-some-code-static.patch
asiliantfb.c: make some code static

i386-apic-kconfig-cleanups.patch
i386 APIC Kconfig cleanups

security-seclvlc-make-some-code-static.patch
security/seclvl.c: make some code static

drivers-block-elevatorc-make-two-functions-static.patch
drivers/block/elevator.c: make two functions static

drivers-block-rdc-make-two-variables-static.patch
drivers/block/rd.c: make two variables static

loopc-make-two-functions-static.patch
loop.c: make two functions static

remove-bouncing-email-address-of-thomas-hood.patch
remove bouncing email address of Thomas Hood

fs-adfs-dir_fc-remove-an-unused-function.patch
fs/adfs/dir_f.c: remove an unused function

drivers-char-moxac-if-0-an-unused-function.patch
drivers/char/moxa.c: #if 0 an unused function

fs-lockd-clntprocc-make-2-functions-static.patch
fs/lockd/clntproc.c: make 2 functions static

oss-sb_cardc-no-need-to-include-mcah.patch
OSS sb_card.c: no need to include mca.h

ioschedc-use-proper-documentation-path.patch
*-iosched.c: Use proper documentation path

kernel-resourcec-make-resource_op-static.patch
kernel/resource.c: make resource_op static

kernel-power-mainc-make-pm_states-static.patch
kernel/power/main.c: make pm_states static

kernel-sysc-make-some-code-static.patch
kernel/sys.c: make some code static

scsi-ipsc-make-some-code-static.patch
SCSI ips.c: make some code static

scsi-psi240ic-make-4-functions-static.patch
SCSI psi240i.c: make 4 functions static

scsi-src-make-a-struct-static.patch
SCSI sr.c: make a struct static

small-drivers-video-kyro-cleanups.patch
small drivers/video/kyro/ cleanups

drivers-video-i810-make-some-code-static.patch
drivers/video/i810/: make some code static

floppyc-make-some-code-static.patch
floppy.c: make some code static

drivers-block-nbdc-make-3-functions-static.patch
drivers/block/nbd.c: make 3 functions static

drivers-block-cpqarrayc-small-cleanups.patch
drivers/block/cpqarray.c: small cleanups

pcxx-remove-obsolete-driver.patch
pcxx: Remove obsolete driver

pty-oops-fix.patch
pty oops fix

warning-fix-in-drivers-cdrom-mcdc.patch
warning fix in drivers/cdrom/mcd.c

wavefront-reduce-stack-usage.patch
wavefront: reduce stack usage

mm-page-writebackc-remove-an-unused-function-2.patch
mm/page-writeback.c: remove an unused function #2

generic_serialh-kill-incorrect-gs_debug-reference.patch
generic_serial.h: kill incorrect gs_debug reference

kernel-timerc-make-two-variables-static.patch
kernel/timer.c: make two variables static

remove-the-unused-oss-maestro_tablesh.patch
remove the unused OSS maestro_tables.h

fs-hfs-misc-cleanups.patch
fs/hfs/: misc cleanups

fs-hpfs-make-some-code-static.patch
fs/hpfs/: make some code static

fs-hfsplus-misc-cleanups.patch
fs/hfsplus/: misc cleanups

i386-x86_64-processc-make-hlt_counter-static.patch
i386/x86_64 process.c: make hlt_counter static

i386-mach-default-topologyc-make-cpu_devices-static.patch
i386/mach-default/topology.c: make cpu_devices static

i386-math-emu-misc-cleanups.patch
i386/math-emu/: misc cleanups

non-pc-parport-config-change.patch
non-PC parport config change

prism54-misc-cleanups.patch
prism54: misc cleanups

scsi-qlogicfcc-some-cleanups.patch
SCSI qlogicfc.c: some cleanups

scsi-qlogicispc-some-cleanups.patch
SCSI qlogicisp.c: some cleanups

savagefbc-make-some-code-static.patch
savagefb.c: make some code static

hpet-setup-comment-fix.patch
hpet setup comment fix

fs-ncpfs-ncplib_kernelc-make-a-function-static.patch
fs/ncpfs/ncplib_kernel.c: make a function static

kill-iphase5526.patch
kill IPHASE5526

fs-nfs-make-some-code-static.patch
fs/nfs/: make some code static

i386-x86_64-acpi-sleepc-kill-unused-acpi_save_state_disk.patch
i386/x86_64: acpi/sleep.c: kill unused acpi_save_state_disk

smpbootc-cleanups.patch
smp{,boot}.c cleanups

i386-kernel-i387c-misc-cleanups.patch
i386/kernel/i387.c: misc cleanups

i386-x86_64-i8259c-make-mask_and_ack_8259a-static.patch
i386/x86_64 i8259.c: make mask_and_ack_8259A static

scsi-sym53c416c-make-a-function-static.patch
SCSI sym53c416.c: make a function static

scsi-ultrastorc-make-a-variable-static.patch
SCSI ultrastor.c: make a variable static

kernel-intermodulec-make-inter_module_get-static.patch
kernel/intermodule.c: make inter_module_get static

mxserc-remove-unused-variable.patch
mxser.c: remove unused variable

update-panic-comment.patch
Update panic() comment

pm3fb-remove-kernel-22-code.patch
pm3fb: remove kernel 2.2 code

sstfbc-make-some-code-static.patch
sstfb.c: make some code static

scsi-53c700c-make-ncr_700_intr-static.patch
SCSI 53c700.c: make NCR_700_intr static

scsi-dpt_i2oc-make-some-code-static.patch
SCSI: dpt_i2o.c: make some code static

i386-io_apicc-make-two-variables-static.patch
i386 io_apic.c: make two variables static

i386-x86_64-mpparsec-make-some-code-static.patch
i386/x86_64: mpparse.c: make some code static

i386-quirksc-make-a-function-static.patch
i386 quirks.c: make a function static

drivers-block-paride-cleanups.patch
drivers/block/paride/ cleanups (fwd)

cfq-ioschedc-make-some-code-static.patch
cfq-iosched.c: make some code static

deadline-ioschedc-make-a-struct-static.patch
deadline-iosched.c: make a struct static

remove-obsolete-linux-resourceh-inclusion-from-asm-generic-siginfoh.patch
remove obsolete linux/resource.h inclusion from asm-generic/siginfo.h

fix-pm_message_t-in-generic-code.patch
Fix pm_message_t in generic code

fix-u32-vs-pm_message_t-in-usb.patch
Fix u32 vs. pm_message_t in USB

fix-u32-vs-pm_message_t-confusion-in-oss.patch
Fix u32 vs. pm_message_t confusion in OSS

fix-u32-vs-pm_message_t-confusion-in-pcmcia.patch
Fix u32 vs. pm_message_t confusion in PCMCIA

fix-u32-vs-pm_message_t-confusion-in-firewire.patch
Fix u32 vs. pm_message_t confusion in firewire

fix-u32-vs-pm_message_t-in-network-device-drivers.patch
Fix u32 vs. pm_message_t in network device drivers

fix-u32-vs-pm_message_t-confusion-in-framebuffers.patch
Fix u32 vs. pm_message_t confusion in framebuffers

fix-u32-vs-pm_message_t-confusion-in-mmc.patch
Fix u32 vs. pm_message_t confusion in MMC

fix-u32-vs-pm_message_t-confusion-in-serials.patch
Fix u32 vs. pm_message_t confusion in serials

fix-u32-vs-pm_message_t-in-macintosh.patch
Fix u32 vs. pm_message_t in macintosh

fix-u32-vs-pm_message_t-confusion-in-agp.patch
Fix u32 vs. pm_message_t confusion in AGP

fs-jffs-misc-cleanups.patch
fs/jffs/: misc cleanups

fs-jffs2-misc-cleanups.patch
fs/jffs2/: misc cleanups

drivers-block-cciss-misc-cleanups.patch
drivers/block/cciss*: misc cleanups

remove-unused-get_resource_list-declaration.patch
Remove unused get_resource_list() declaration

typo-in-include-linux-compilerh.patch
typo in include/linux/compiler.h

#1 lore raw

Andrew Morton <[email protected]> disait dernièrement que :

Quoted 12 lines

ftp://ftp.kernel.org/pub/linux/kernel/people/akpm/patches/2.6/2.6.11-rc4/2.6.11-rc4-mm1/

- Various fixes and updates all over the place. Things seem to have slowed down a bit.

- Last, final, ultimate call: if anyone has patches in here which are 2.6.11 material, please tell me.

Changes since 2.6.11-rc3-mm1:

[snip]

Quoted 3 lines

+inotify.patch

Not sure if this is the latest version.

it is the latest Robert Love posted against -mm kernels, but in inotify_ignore():

static int inotify_ignore(struct inotify_device *dev, s32 wd)

{
	struct inotify_watch *watch;
	int ret = 0;

	spin_lock(&dev->lock);
	watch = dev_find_wd(dev, wd);
	spin_unlock(&dev->lock); <------------- lock is released, but
	if (!watch) {
		ret = -EINVAL;
		goto out;
	}
	__remove_watch(watch, dev); <---------- must be called with lock held

out:

	spin_unlock(&dev->lock); <------------- anyway, lock is 
	return ret;                             released and sub_preempt_count
}                                               BUG's on SMP and PREEMPT

__remove_watch() must be called with ->lock held on dev. Anyway, ->lock is released after label out.

drivers/char/inotify.c +1 -1
@@ -952,7 +952,7 @@
 
 	spin_lock(&dev->lock);
 	watch = dev_find_wd(dev, wd);
-	spin_unlock(&dev->lock);
+
 	if (!watch) {
 		ret = -EINVAL;
 		goto out;
Signature · 1 line
-- 
Quoted 1 line

Can you explain this behaviour?

Yes
--
Alan

[Oh wait you want to know why...]

- Alan Cox on linux-kernel

#2 lore raw
Quoted 2 lines · Mathieu Segaud

it is the latest Robert Love posted against -mm kernels, but in inotify_ignore():

I posted an updated patch last Friday, which fixed this.

Anyhow, this is the correct fix.

Thanks,

Robert Love

#3 lore raw

Re: 2.6.11-rc4-mm1 : IDE crazy numbers, hdb renumbered to hdq ?

In reply to Andrew Morton

This kernel came up, but my boot script complained about no /dev/hdb3 when trying to mount /var.
(I have two IDE disks on the same cable, and an IDE cdrom on another.) They are usually hda, hdb, and hdc.

MAKEDEV hdq did not help. Looking at sysfs, it turns out that
/dev/hdq1 is at major:3 minor:1025 if I interpret things right. (/dev/hda1 is at 3:1, which is correct.) These numbers did not work with my mknod, it created 7:1 instead.
So I didn't get to test this mysterious device.

But I assume this is a mistake of some sort, I haven't heard about any change in the IDE numbering coming up? 2.6.1-rc3-mm1 works as expected.

It may be interesting to note that my root raid-1 came up fine, consisting of hdq1 and hda1 instead of the usual hdb1 and hda1.

Helge Hafting

#4 lore raw

Re: 2.6.11-rc4-mm1 : IDE crazy numbers, hdb renumbered to hdq ?

Quoted 12 lines · Helge Hafting

This kernel came up, but my boot script complained about no /dev/hdb3
when trying to mount /var.
(I have two IDE disks on the same cable, and an IDE cdrom on another.) They are usually hda, hdb, and hdc.

MAKEDEV hdq did not help. Looking at sysfs, it turns out that /dev/hdq1 is at major:3 minor:1025 if I interpret things right. (/dev/hda1 is at 3:1, which is correct.)
These numbers did not work with my mknod, it created 7:1 instead. So I didn't get to test this mysterious device.

Quoted 5 lines

But I assume this is a mistake of some sort, I haven't heard about any change in the IDE numbering coming up? 2.6.1-rc3-mm1 works as expected.

It may be interesting to note that my root raid-1 came up fine, consisting of hdq1 and hda1 instead of the usual hdb1 and hda1.

I don't know what could be causing that. Please send .config. If you set CONFIG_BASE_FULL=n, try setting it to `y'.

#5 lore raw

Re: 2.6.11-rc4-mm1 : IDE crazy numbers, hdb renumbered to hdq ?

Quoted 16 lines · Andrew Morton
Quoted 14 lines · Helge Hafting

This kernel came up, but my boot script complained about no /dev/hdb3 when trying to mount /var.
(I have two IDE disks on the same cable, and an IDE cdrom on another.) They are usually hda, hdb, and hdc.

MAKEDEV hdq did not help. Looking at sysfs, it turns out that /dev/hdq1 is at major:3 minor:1025 if I interpret things right. (/dev/hda1 is at 3:1, which is correct.)
These numbers did not work with my mknod, it created 7:1 instead. So I didn't get to test this mysterious device.

But I assume this is a mistake of some sort, I haven't heard about any change in the IDE numbering coming up? 2.6.1-rc3-mm1 works as expected.

Quoted 7 lines
Quoted 2 lines

It may be interesting to note that my root raid-1 came up fine, consisting of hdq1 and hda1 instead of the usual hdb1 and hda1.

I don't know what could be causing that. Please send .config. If you set CONFIG_BASE_FULL=n, try setting it to `y'.

this is just a "me too"...

Here is some few lines from dmesg :

Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
VP_IDE: IDE controller at PCI slot 0000:00:04.1
VP_IDE: chipset revision 6
VP_IDE: not 100% native mode: will probe irqs later
VP_IDE: VIA vt82c686b (rev 40) IDE UDMA100 controller on pci0000:00:04.1

    ide0: BM-DMA at 0xd800-0xd807, BIOS settings: hda:DMA, hdb:DMA
    ide1: BM-DMA at 0xd808-0xd80f, BIOS settings: hdc:DMA, hdd:DMA

Probing IDE interface ide0...
hda: ST340016A, ATA DISK drive
hdb: Maxtor 6Y080L0, ATA DISK drive
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
Probing IDE interface ide1...
hdc: CD-950E/AKU, ATAPI CD/DVD-ROM drive
hdd: LITE-ON LTR-48125S, ATAPI CD/DVD-ROM drive
ide1 at 0x170-0x177,0x376 on irq 15
Probing IDE interface ide2...
Probing IDE interface ide3...
Probing IDE interface ide4...
Probing IDE interface ide5...
hda: max request size: 128KiB
hda: 78165360 sectors (40020 MB) w/2048KiB Cache, CHS=65535/16/63, UDMA(100)
hda: cache flushes not supported
hda: hda1 hda2 hda3 < hda5 hda6 hda7 hda8 hda9 hda10 > hda4
hdb: max request size: 128KiB
hdb: 160086528 sectors (81964 MB) w/2048KiB Cache, CHS=65535/16/63, UDMA(100)
hdb: cache flushes supported
hdq: hdq1 hdq2 < hdq5 hdq6 hdq7 hdq8 >

~$ ls -l /dev/hd*

brw-rw----  1 root    disk   3,    0 fév 23 22:45 /dev/hda
brw-rw----  1 root    disk   3,    1 fév 23 22:45 /dev/hda1
brw-rw----  1 root    disk   3,   10 fév 23 22:45 /dev/hda10
brw-rw----  1 root    disk   3,    2 fév 23 22:45 /dev/hda2
brw-rw----  1 root    disk   3,    3 fév 23 22:45 /dev/hda3
brw-rw----  1 root    disk   3,    4 fév 23 22:45 /dev/hda4
brw-rw----  1 root    disk   3,    5 fév 23 22:45 /dev/hda5
brw-rw----  1 root    disk   3,    6 fév 23 22:45 /dev/hda6
brw-rw----  1 root    disk   3,    7 fév 23 22:45 /dev/hda7
brw-rw----  1 root    disk   3,    8 fév 23 22:45 /dev/hda8
brw-rw----  1 root    disk   3,    9 fév 23 22:45 /dev/hda9
brw-rw----  1 laurent cdrom 22,    0 fév 23 22:45 /dev/hdc
brw-------  1 root    root  22,   64 fév 23 22:45 /dev/hdd
brw-rw----  1 root    disk   3, 1024 fév 23 22:45 /dev/hdq
brw-rw----  1 root    disk   3, 1025 fév 23 22:45 /dev/hdq1
brw-rw----  1 root    disk   3, 1026 fév 23 22:45 /dev/hdq2
brw-rw----  1 root    disk   3, 1029 fév 23 22:45 /dev/hdq5
brw-rw----  1 root    disk   3, 1030 fév 23 22:45 /dev/hdq6
brw-rw----  1 root    disk   3, 1031 fév 23 22:45 /dev/hdq7
brw-rw----  1 root    disk   3, 1032 fév 23 22:45 /dev/hdq8
brw-rw----  1 root    disk  22, 1024 fév 23 22:45 /dev/hds

/dev/hdq should be /dev/hdb.
hey, what's this /dev/hds ? digging into /sys/block...

~$ ls -l /sys/block/hds/device
lrwxrwxrwx 1 root root 0 fév 23 22:45 /sys/block/hds/device -> ../../devices/pci0000:00/0000:00:04.1/ide1/1.1/

/dev/hdq should be /dev/hdd...

~$ ls -l /proc/ide
total 4

-r--r--r--  1 root root 0 fév 23 23:28 drivers
lrwxrwxrwx  1 root root 8 fév 23 23:28 hda -> ide0/hda/
lrwxrwxrwx  1 root root 8 fév 23 23:28 hdb -> ide0/hdb/
lrwxrwxrwx  1 root root 8 fév 23 23:28 hdc -> ide1/hdc/
lrwxrwxrwx  1 root root 8 fév 23 23:28 hdd -> ide1/hdd/
dr-xr-xr-x  4 root root 0 fév 23 23:28 ide0/
dr-xr-xr-x  4 root root 0 fév 23 23:28 ide1/
-r--r--r--  1 root root 0 fév 23 23:28 via

~$ ls -d /sys/block/hd*
/sys/block/hda/ /sys/block/hdc/ /sys/block/hdq/ /sys/block/hds/

.config is attached

~~
laurent

#
# Automatically generated make config: don't edit
# Linux kernel version: 2.6.11-rc4-mm1
# Wed Feb 23 21:30:41 2005
#
CONFIG_X86=y
CONFIG_MMU=y
CONFIG_UID16=y
CONFIG_GENERIC_ISA_DMA=y
CONFIG_GENERIC_IOMAP=y

#
# Code maturity level options
#
CONFIG_EXPERIMENTAL=y
CONFIG_CLEAN_COMPILE=y
CONFIG_BROKEN_ON_SMP=y

#
# General setup
#
CONFIG_LOCALVERSION=""
CONFIG_SWAP=y
CONFIG_SYSVIPC=y
CONFIG_POSIX_MQUEUE=y
# CONFIG_BSD_PROCESS_ACCT is not set
CONFIG_SYSCTL=y
# CONFIG_AUDIT is not set
CONFIG_HOTPLUG=y
CONFIG_KOBJECT_UEVENT=y
# CONFIG_IKCONFIG is not set
CONFIG_EMBEDDED=y
CONFIG_KALLSYMS=y
# CONFIG_KALLSYMS_ALL is not set
# CONFIG_KALLSYMS_EXTRA_PASS is not set
CONFIG_BASE_FULL=y
CONFIG_BASE_SMALL=0
CONFIG_FUTEX=y
CONFIG_EPOLL=y
CONFIG_CC_OPTIMIZE_FOR_SIZE=y
CONFIG_SHMEM=y
CONFIG_CC_ALIGN_FUNCTIONS=0
CONFIG_CC_ALIGN_LABELS=0
CONFIG_CC_ALIGN_LOOPS=0
CONFIG_CC_ALIGN_JUMPS=0
# CONFIG_TINY_SHMEM is not set

#
# Loadable module support
#
CONFIG_MODULES=y
CONFIG_MODULE_UNLOAD=y
CONFIG_MODULE_FORCE_UNLOAD=y
CONFIG_OBSOLETE_MODPARM=y
# CONFIG_MODVERSIONS is not set
# CONFIG_MODULE_SRCVERSION_ALL is not set
CONFIG_KMOD=y

#
# Processor type and features
#
CONFIG_X86_PC=y
# CONFIG_X86_ELAN is not set
# CONFIG_X86_VOYAGER is not set
# CONFIG_X86_NUMAQ is not set
# CONFIG_X86_SUMMIT is not set
# CONFIG_X86_BIGSMP is not set
# CONFIG_X86_VISWS is not set
# CONFIG_X86_GENERICARCH is not set
# CONFIG_X86_ES7000 is not set
# CONFIG_M386 is not set
# CONFIG_M486 is not set
# CONFIG_M586 is not set
# CONFIG_M586TSC is not set
# CONFIG_M586MMX is not set
# CONFIG_M686 is not set
# CONFIG_MPENTIUMII is not set
# CONFIG_MPENTIUMIII is not set
# CONFIG_MPENTIUMM is not set
# CONFIG_MPENTIUM4 is not set
# CONFIG_MK6 is not set
CONFIG_MK7=y
# CONFIG_MK8 is not set
# CONFIG_MCRUSOE is not set
# CONFIG_MEFFICEON is not set
# CONFIG_MWINCHIPC6 is not set
# CONFIG_MWINCHIP2 is not set
# CONFIG_MWINCHIP3D is not set
# CONFIG_MCYRIXIII is not set
# CONFIG_MVIAC3_2 is not set
# CONFIG_X86_GENERIC is not set
CONFIG_X86_CMPXCHG=y
CONFIG_X86_XADD=y
CONFIG_X86_L1_CACHE_SHIFT=6
CONFIG_RWSEM_XCHGADD_ALGORITHM=y
CONFIG_GENERIC_CALIBRATE_DELAY=y
CONFIG_X86_WP_WORKS_OK=y
CONFIG_X86_INVLPG=y
CONFIG_X86_BSWAP=y
CONFIG_X86_POPAD_OK=y
CONFIG_X86_GOOD_APIC=y
CONFIG_X86_INTEL_USERCOPY=y
CONFIG_X86_USE_PPRO_CHECKSUM=y
CONFIG_X86_USE_3DNOW=y
CONFIG_HPET_TIMER=y
# CONFIG_SMP is not set
# CONFIG_PREEMPT is not set
CONFIG_X86_UP_APIC=y
CONFIG_X86_UP_IOAPIC=y
CONFIG_X86_LOCAL_APIC=y
CONFIG_X86_IO_APIC=y
CONFIG_X86_TSC=y
CONFIG_X86_MCE=y
CONFIG_X86_MCE_NONFATAL=y
# CONFIG_X86_MCE_P4THERMAL is not set
# CONFIG_TOSHIBA is not set
# CONFIG_I8K is not set
# CONFIG_MICROCODE is not set
# CONFIG_X86_MSR is not set
# CONFIG_X86_CPUID is not set

#
# Firmware Drivers
#
CONFIG_EDD=y
CONFIG_NOHIGHMEM=y
# CONFIG_HIGHMEM4G is not set
# CONFIG_HIGHMEM64G is not set
# CONFIG_MATH_EMULATION is not set
CONFIG_MTRR=y
# CONFIG_EFI is not set
CONFIG_REGPARM=y
CONFIG_SECCOMP=y

#
# Performance-monitoring counters support
#
# CONFIG_PERFCTR is not set
CONFIG_PHYSICAL_START=0x100000
CONFIG_KEXEC=y
# CONFIG_CRASH_DUMP is not set

#
# Power management options (ACPI, APM)
#
CONFIG_PM=y
# CONFIG_PM_DEBUG is not set
CONFIG_SOFTWARE_SUSPEND=y
CONFIG_PM_STD_PARTITION="/dev/hdb6"

#
# ACPI (Advanced Configuration and Power Interface) Support #
CONFIG_ACPI=y
CONFIG_ACPI_BOOT=y
CONFIG_ACPI_INTERPRETER=y
CONFIG_ACPI_SLEEP=y
CONFIG_ACPI_SLEEP_PROC_FS=y
CONFIG_ACPI_AC=y
CONFIG_ACPI_BATTERY=y
CONFIG_ACPI_BUTTON=y
CONFIG_ACPI_VIDEO=m
CONFIG_ACPI_FAN=y
CONFIG_ACPI_PROCESSOR=y
CONFIG_ACPI_THERMAL=y
# CONFIG_ACPI_ASUS is not set
# CONFIG_ACPI_IBM is not set
# CONFIG_ACPI_TOSHIBA is not set
# CONFIG_ACPI_PCC is not set
# CONFIG_ACPI_SONY is not set CONFIG_ACPI_BLACKLIST_YEAR=0
CONFIG_ACPI_DEBUG=y
CONFIG_ACPI_BUS=y
CONFIG_ACPI_EC=y
CONFIG_ACPI_POWER=y
CONFIG_ACPI_PCI=y
CONFIG_ACPI_SYSTEM=y
CONFIG_X86_PM_TIMER=y
# CONFIG_ACPI_CONTAINER is not set

#
# APM (Advanced Power Management) BIOS Support
#
# CONFIG_APM is not set

#
# CPU Frequency scaling
#
# CONFIG_CPU_FREQ is not set

#
# Bus options (PCI, PCMCIA, EISA, MCA, ISA)
#
CONFIG_PCI=y
# CONFIG_PCI_GOBIOS is not set
# CONFIG_PCI_GOMMCONFIG is not set
# CONFIG_PCI_GODIRECT is not set
CONFIG_PCI_GOANY=y
CONFIG_PCI_BIOS=y
CONFIG_PCI_DIRECT=y
CONFIG_PCI_MMCONFIG=y
# CONFIG_PCIEPORTBUS is not set
# CONFIG_PCI_MSI is not set
# CONFIG_PCI_LEGACY_PROC is not set
CONFIG_PCI_NAMES=y
CONFIG_ISA=y
# CONFIG_EISA is not set
# CONFIG_MCA is not set
# CONFIG_SCx200 is not set

#
# PCCARD (PCMCIA/CardBus) support
#
# CONFIG_PCCARD is not set

#
# PCI Hotplug Support
#
# CONFIG_HOTPLUG_PCI is not set

#
# Executable file formats
#
CONFIG_BINFMT_ELF=y
CONFIG_BINFMT_AOUT=m
CONFIG_BINFMT_MISC=m

#
# Device Drivers
#

#
# Generic Driver Options
#
CONFIG_STANDALONE=y
CONFIG_PREVENT_FIRMWARE_BUILD=y
# CONFIG_FW_LOADER is not set
# CONFIG_DEBUG_DRIVER is not set

#
# Connector - unified userspace <-> kernelspace linker #
# CONFIG_CONNECTOR is not set

#
# Memory Technology Devices (MTD)
#
# CONFIG_MTD is not set

#
# Parallel port support
#
CONFIG_PARPORT=m
CONFIG_PARPORT_PC=m
# CONFIG_PARPORT_SERIAL is not set
# CONFIG_PARPORT_PC_FIFO is not set
# CONFIG_PARPORT_PC_SUPERIO is not set
# CONFIG_PARPORT_GSC is not set
CONFIG_PARPORT_1284=y

#
# Plug and Play support
#
# CONFIG_PNP is not set

#
# Block devices
#
CONFIG_BLK_DEV_FD=m
# CONFIG_BLK_DEV_XD is not set
# CONFIG_PARIDE is not set
# CONFIG_BLK_CPQ_DA is not set
# CONFIG_BLK_CPQ_CISS_DA is not set
# CONFIG_BLK_DEV_DAC960 is not set
# CONFIG_BLK_DEV_UMEM is not set
# CONFIG_BLK_DEV_COW_COMMON is not set
CONFIG_BLK_DEV_LOOP=m
# CONFIG_BLK_DEV_CRYPTOLOOP is not set
# CONFIG_BLK_DEV_NBD is not set
# CONFIG_BLK_DEV_SX8 is not set
CONFIG_BLK_DEV_UB=m
CONFIG_BLK_DEV_RAM=y
CONFIG_BLK_DEV_RAM_COUNT=16
CONFIG_BLK_DEV_RAM_SIZE=4096
CONFIG_BLK_DEV_INITRD=y
CONFIG_INITRAMFS_SOURCE=""
# CONFIG_LBD is not set
CONFIG_CDROM_PKTCDVD=m
CONFIG_CDROM_PKTCDVD_BUFFERS=8
# CONFIG_CDROM_PKTCDVD_WCACHE is not set

#
# IO Schedulers
#
CONFIG_IOSCHED_NOOP=y
CONFIG_IOSCHED_AS=y
CONFIG_IOSCHED_DEADLINE=y
CONFIG_IOSCHED_CFQ=y
# CONFIG_ATA_OVER_ETH is not set

#
# ATA/ATAPI/MFM/RLL support
#
CONFIG_IDE=y
CONFIG_BLK_DEV_IDE=y

#
# Please see Documentation/ide.txt for help/info on IDE drives #
# CONFIG_BLK_DEV_IDE_SATA is not set
# CONFIG_BLK_DEV_HD_IDE is not set CONFIG_BLK_DEV_IDEDISK=y
# CONFIG_IDEDISK_MULTI_MODE is not set CONFIG_BLK_DEV_IDECD=m
# CONFIG_BLK_DEV_IDETAPE is not set
# CONFIG_BLK_DEV_IDEFLOPPY is not set CONFIG_BLK_DEV_IDESCSI=m
# CONFIG_IDE_TASK_IOCTL is not set

#
# IDE chipset support/bugfixes
#
CONFIG_IDE_GENERIC=y
# CONFIG_BLK_DEV_CMD640 is not set
CONFIG_BLK_DEV_IDEPCI=y
CONFIG_IDEPCI_SHARE_IRQ=y
# CONFIG_BLK_DEV_OFFBOARD is not set
# CONFIG_BLK_DEV_GENERIC is not set
# CONFIG_BLK_DEV_OPTI621 is not set
# CONFIG_BLK_DEV_RZ1000 is not set
CONFIG_BLK_DEV_IDEDMA_PCI=y
# CONFIG_BLK_DEV_IDEDMA_FORCED is not set
CONFIG_IDEDMA_PCI_AUTO=y
# CONFIG_IDEDMA_ONLYDISK is not set
# CONFIG_BLK_DEV_AEC62XX is not set
# CONFIG_BLK_DEV_ALI15X3 is not set
# CONFIG_BLK_DEV_AMD74XX is not set
# CONFIG_BLK_DEV_ATIIXP is not set
# CONFIG_BLK_DEV_CMD64X is not set
# CONFIG_BLK_DEV_TRIFLEX is not set
# CONFIG_BLK_DEV_CY82C693 is not set
# CONFIG_BLK_DEV_CS5520 is not set
# CONFIG_BLK_DEV_CS5530 is not set
# CONFIG_BLK_DEV_HPT34X is not set
# CONFIG_BLK_DEV_HPT366 is not set
# CONFIG_BLK_DEV_SC1200 is not set
# CONFIG_BLK_DEV_PIIX is not set
# CONFIG_BLK_DEV_NS87415 is not set
# CONFIG_BLK_DEV_PDC202XX_OLD is not set
# CONFIG_BLK_DEV_PDC202XX_NEW is not set
# CONFIG_BLK_DEV_SVWKS is not set
# CONFIG_BLK_DEV_SIIMAGE is not set
# CONFIG_BLK_DEV_SIS5513 is not set
# CONFIG_BLK_DEV_SLC90E66 is not set
# CONFIG_BLK_DEV_TRM290 is not set
CONFIG_BLK_DEV_VIA82CXXX=y
# CONFIG_IDE_ARM is not set
# CONFIG_IDE_CHIPSETS is not set
CONFIG_BLK_DEV_IDEDMA=y
# CONFIG_IDEDMA_IVB is not set
CONFIG_IDEDMA_AUTO=y
# CONFIG_BLK_DEV_HD is not set

#
# SCSI device support
#
CONFIG_SCSI=m
CONFIG_SCSI_PROC_FS=y

#
# SCSI support type (disk, tape, CD-ROM)
#
CONFIG_BLK_DEV_SD=m
CONFIG_CHR_DEV_ST=m
# CONFIG_CHR_DEV_OSST is not set
CONFIG_BLK_DEV_SR=m
CONFIG_BLK_DEV_SR_VENDOR=y
CONFIG_CHR_DEV_SG=m
# CONFIG_CHR_DEV_SCH is not set

#
# Some SCSI devices (e.g. CD jukebox) support multiple LUNs #
CONFIG_SCSI_MULTI_LUN=y
CONFIG_SCSI_CONSTANTS=y
# CONFIG_SCSI_LOGGING is not set

#
# SCSI Transport Attributes
#
CONFIG_SCSI_SPI_ATTRS=m
# CONFIG_SCSI_FC_ATTRS is not set
# CONFIG_SCSI_ISCSI_ATTRS is not set

#
# SCSI low-level drivers
#
# CONFIG_BLK_DEV_3W_XXXX_RAID is not set
# CONFIG_SCSI_3W_9XXX is not set
# CONFIG_SCSI_ARCMSR is not set
# CONFIG_SCSI_7000FASST is not set
# CONFIG_SCSI_ACARD is not set
# CONFIG_SCSI_AHA152X is not set
# CONFIG_SCSI_AHA1542 is not set
# CONFIG_SCSI_AACRAID is not set
# CONFIG_SCSI_AIC7XXX is not set
# CONFIG_SCSI_AIC7XXX_OLD is not set
# CONFIG_SCSI_AIC79XX is not set
# CONFIG_SCSI_DPT_I2O is not set
# CONFIG_SCSI_IN2000 is not set
# CONFIG_MEGARAID_NEWGEN is not set
# CONFIG_MEGARAID_LEGACY is not set
# CONFIG_SCSI_SATA is not set
# CONFIG_SCSI_BUSLOGIC is not set
# CONFIG_SCSI_DMX3191D is not set
# CONFIG_SCSI_DTC3280 is not set
# CONFIG_SCSI_EATA is not set
# CONFIG_SCSI_EATA_PIO is not set
# CONFIG_SCSI_FUTURE_DOMAIN is not set
# CONFIG_SCSI_GDTH is not set
# CONFIG_SCSI_GENERIC_NCR5380 is not set
# CONFIG_SCSI_GENERIC_NCR5380_MMIO is not set
# CONFIG_SCSI_IPS is not set
# CONFIG_SCSI_INITIO is not set
# CONFIG_SCSI_INIA100 is not set
# CONFIG_SCSI_PPA is not set
# CONFIG_SCSI_IMM is not set
# CONFIG_SCSI_NCR53C406A is not set
# CONFIG_SCSI_SYM53C8XX_2 is not set
# CONFIG_SCSI_IPR is not set
# CONFIG_SCSI_PAS16 is not set
# CONFIG_SCSI_PSI240I is not set
# CONFIG_SCSI_QLOGIC_FAS is not set
# CONFIG_SCSI_QLOGIC_ISP is not set
# CONFIG_SCSI_QLOGIC_FC is not set
# CONFIG_SCSI_QLOGIC_1280 is not set
CONFIG_SCSI_QLA2XXX=m
# CONFIG_SCSI_QLA21XX is not set
# CONFIG_SCSI_QLA22XX is not set
# CONFIG_SCSI_QLA2300 is not set
# CONFIG_SCSI_QLA2322 is not set
# CONFIG_SCSI_QLA6312 is not set
# CONFIG_SCSI_SYM53C416 is not set
# CONFIG_SCSI_DC395x is not set
# CONFIG_SCSI_DC390T is not set
# CONFIG_SCSI_T128 is not set
# CONFIG_SCSI_U14_34F is not set
# CONFIG_SCSI_ULTRASTOR is not set
# CONFIG_SCSI_NSP32 is not set
# CONFIG_SCSI_DEBUG is not set

#
# Old CD-ROM drivers (not SCSI, not IDE)
#
# CONFIG_CD_NO_IDESCSI is not set

#
# Multi-device support (RAID and LVM)
#
CONFIG_MD=y
CONFIG_BLK_DEV_MD=m
CONFIG_MD_LINEAR=m
CONFIG_MD_RAID0=m
CONFIG_MD_RAID1=m
# CONFIG_MD_RAID10 is not set
# CONFIG_MD_RAID5 is not set
# CONFIG_MD_RAID6 is not set
# CONFIG_MD_MULTIPATH is not set
# CONFIG_MD_FAULTY is not set
CONFIG_BLK_DEV_DM=m
CONFIG_DM_CRYPT=m
# CONFIG_DM_SNAPSHOT is not set
CONFIG_DM_MIRROR=m
# CONFIG_DM_ZERO is not set
# CONFIG_DM_MULTIPATH is not set

#
# Fusion MPT device support
#
# CONFIG_FUSION is not set

#
# IEEE 1394 (FireWire) support
#
CONFIG_IEEE1394=m

#
# Subsystem Options
#
# CONFIG_IEEE1394_VERBOSEDEBUG is not set
CONFIG_IEEE1394_OUI_DB=y
# CONFIG_IEEE1394_EXTRA_CONFIG_ROMS is not set

#
# Device Drivers
#
# CONFIG_IEEE1394_PCILYNX is not set
CONFIG_IEEE1394_OHCI1394=m

#
# Protocol Drivers
#
CONFIG_IEEE1394_VIDEO1394=m
# CONFIG_IEEE1394_SBP2 is not set
# CONFIG_IEEE1394_ETH1394 is not set
CONFIG_IEEE1394_DV1394=m
CONFIG_IEEE1394_RAWIO=m
# CONFIG_IEEE1394_CMP is not set

#
# I2O device support
#
# CONFIG_I2O is not set

#
# Networking support
#
CONFIG_NET=y

#
# Networking options
#
CONFIG_PACKET=m
# CONFIG_PACKET_MMAP is not set
# CONFIG_NETLINK_DEV is not set
CONFIG_UNIX=y
# CONFIG_NET_KEY is not set
CONFIG_INET=y
# CONFIG_IP_MULTICAST is not set
CONFIG_IP_ADVANCED_ROUTER=y
# CONFIG_IP_MULTIPLE_TABLES is not set
# CONFIG_IP_ROUTE_MULTIPATH is not set
CONFIG_IP_ROUTE_VERBOSE=y
# CONFIG_IP_PNP is not set
# CONFIG_NET_IPIP is not set
# CONFIG_NET_IPGRE is not set
# CONFIG_ARPD is not set
CONFIG_SYN_COOKIES=y
CONFIG_INET_AH=m
CONFIG_INET_ESP=m
CONFIG_INET_IPCOMP=m
CONFIG_INET_TUNNEL=m
CONFIG_IP_TCPDIAG=m
# CONFIG_IP_TCPDIAG_IPV6 is not set

#
# IP: Virtual Server Configuration
#
# CONFIG_IP_VS is not set
# CONFIG_IPV6 is not set
CONFIG_NETFILTER=y
# CONFIG_NETFILTER_DEBUG is not set

#
# IP: Netfilter Configuration
#
CONFIG_IP_NF_CONNTRACK=m
# CONFIG_IP_NF_CT_ACCT is not set
# CONFIG_IP_NF_CONNTRACK_MARK is not set
# CONFIG_IP_NF_CT_PROTO_SCTP is not set
CONFIG_IP_NF_FTP=m
CONFIG_IP_NF_IRC=m
CONFIG_IP_NF_TFTP=m
CONFIG_IP_NF_AMANDA=m
CONFIG_IP_NF_QUEUE=m
CONFIG_IP_NF_IPTABLES=m
CONFIG_IP_NF_MATCH_LIMIT=m
CONFIG_IP_NF_MATCH_IPRANGE=m
CONFIG_IP_NF_MATCH_MAC=m
CONFIG_IP_NF_MATCH_PKTTYPE=m
CONFIG_IP_NF_MATCH_MARK=m
CONFIG_IP_NF_MATCH_MULTIPORT=m
CONFIG_IP_NF_MATCH_TOS=m
CONFIG_IP_NF_MATCH_RECENT=m
CONFIG_IP_NF_MATCH_ECN=m
CONFIG_IP_NF_MATCH_DSCP=m
CONFIG_IP_NF_MATCH_AH_ESP=m
CONFIG_IP_NF_MATCH_LENGTH=m
CONFIG_IP_NF_MATCH_TTL=m
CONFIG_IP_NF_MATCH_TCPMSS=m
CONFIG_IP_NF_MATCH_HELPER=m
CONFIG_IP_NF_MATCH_STATE=m
CONFIG_IP_NF_MATCH_CONNTRACK=m
CONFIG_IP_NF_MATCH_OWNER=m
CONFIG_IP_NF_MATCH_ADDRTYPE=m
CONFIG_IP_NF_MATCH_REALM=m
# CONFIG_IP_NF_MATCH_SCTP is not set
# CONFIG_IP_NF_MATCH_COMMENT is not set
# CONFIG_IP_NF_MATCH_HASHLIMIT is not set
CONFIG_IP_NF_FILTER=m
CONFIG_IP_NF_TARGET_REJECT=m
CONFIG_IP_NF_TARGET_LOG=m
CONFIG_IP_NF_TARGET_ULOG=m
CONFIG_IP_NF_TARGET_TCPMSS=m
CONFIG_IP_NF_NAT=m
CONFIG_IP_NF_NAT_NEEDED=y
CONFIG_IP_NF_TARGET_MASQUERADE=m
CONFIG_IP_NF_TARGET_REDIRECT=m
CONFIG_IP_NF_TARGET_NETMAP=m
CONFIG_IP_NF_TARGET_SAME=m
# CONFIG_IP_NF_NAT_SNMP_BASIC is not set
CONFIG_IP_NF_NAT_IRC=m
CONFIG_IP_NF_NAT_FTP=m
CONFIG_IP_NF_NAT_TFTP=m
CONFIG_IP_NF_NAT_AMANDA=m
CONFIG_IP_NF_MANGLE=m
CONFIG_IP_NF_TARGET_TOS=m
CONFIG_IP_NF_TARGET_ECN=m
CONFIG_IP_NF_TARGET_DSCP=m
CONFIG_IP_NF_TARGET_MARK=m
CONFIG_IP_NF_TARGET_CLASSIFY=m
CONFIG_IP_NF_RAW=m
CONFIG_IP_NF_TARGET_NOTRACK=m
CONFIG_IP_NF_ARPTABLES=m
CONFIG_IP_NF_ARPFILTER=m
CONFIG_IP_NF_ARP_MANGLE=m
CONFIG_XFRM=y
CONFIG_XFRM_USER=m

#
# SCTP Configuration (EXPERIMENTAL)
#
# CONFIG_IP_SCTP is not set
# CONFIG_ATM is not set
# CONFIG_BRIDGE is not set
# CONFIG_VLAN_8021Q is not set
# CONFIG_DECNET is not set
# CONFIG_LLC2 is not set
# CONFIG_IPX is not set
# CONFIG_ATALK is not set
# CONFIG_X25 is not set
# CONFIG_LAPB is not set
# CONFIG_NET_DIVERT is not set
# CONFIG_ECONET is not set
# CONFIG_WAN_ROUTER is not set

#
# QoS and/or fair queueing
#
CONFIG_NET_SCHED=y
CONFIG_NET_SCH_CLK_JIFFIES=y
# CONFIG_NET_SCH_CLK_GETTIMEOFDAY is not set
# CONFIG_NET_SCH_CLK_CPU is not set
CONFIG_NET_SCH_CBQ=m
CONFIG_NET_SCH_HTB=m
CONFIG_NET_SCH_HFSC=m
CONFIG_NET_SCH_PRIO=m
CONFIG_NET_SCH_RED=m
CONFIG_NET_SCH_SFQ=m
CONFIG_NET_SCH_TEQL=m
CONFIG_NET_SCH_TBF=m
CONFIG_NET_SCH_GRED=m
CONFIG_NET_SCH_DSMARK=m
# CONFIG_NET_SCH_NETEM is not set
CONFIG_NET_SCH_INGRESS=m
CONFIG_NET_QOS=y
CONFIG_NET_ESTIMATOR=y
CONFIG_NET_CLS=y
CONFIG_NET_CLS_TCINDEX=m
CONFIG_NET_CLS_ROUTE4=m
CONFIG_NET_CLS_ROUTE=y
CONFIG_NET_CLS_FW=m
CONFIG_NET_CLS_U32=m
CONFIG_CLS_U32_PERF=y
# CONFIG_NET_CLS_IND is not set
CONFIG_CLS_U32_MARK=y
CONFIG_NET_CLS_RSVP=m
# CONFIG_NET_CLS_RSVP6 is not set
# CONFIG_NET_CLS_ACT is not set
CONFIG_NET_CLS_POLICE=y

#
# Network testing
#
# CONFIG_NET_PKTGEN is not set
# CONFIG_KGDBOE is not set
# CONFIG_NETPOLL is not set
# CONFIG_NETPOLL_RX is not set
# CONFIG_NETPOLL_TRAP is not set
# CONFIG_NET_POLL_CONTROLLER is not set
# CONFIG_HAMRADIO is not set
# CONFIG_IRDA is not set
# CONFIG_BT is not set
# CONFIG_IEEE80211 is not set
CONFIG_NETDEVICES=y
CONFIG_DUMMY=m
# CONFIG_BONDING is not set
# CONFIG_EQUALIZER is not set
# CONFIG_TUN is not set

#
# ARCnet devices
#
# CONFIG_ARCNET is not set

#
# Ethernet (10 or 100Mbit)
#
CONFIG_NET_ETHERNET=y
CONFIG_MII=m
# CONFIG_HAPPYMEAL is not set
# CONFIG_SUNGEM is not set
# CONFIG_NET_VENDOR_3COM is not set
# CONFIG_LANCE is not set
# CONFIG_NET_VENDOR_SMC is not set
# CONFIG_NET_VENDOR_RACAL is not set

#
# Tulip family network device support
#
# CONFIG_NET_TULIP is not set
# CONFIG_AT1700 is not set
# CONFIG_DEPCA is not set
# CONFIG_HP100 is not set
# CONFIG_NET_ISA is not set
CONFIG_NET_PCI=y
# CONFIG_PCNET32 is not set
# CONFIG_AMD8111_ETH is not set
# CONFIG_ADAPTEC_STARFIRE is not set
# CONFIG_AC3200 is not set
# CONFIG_APRICOT is not set
# CONFIG_B44 is not set
# CONFIG_FORCEDETH is not set
# CONFIG_CS89x0 is not set
# CONFIG_DGRS is not set
# CONFIG_EEPRO100 is not set
# CONFIG_E100 is not set
# CONFIG_FEALNX is not set
# CONFIG_NATSEMI is not set
CONFIG_NE2K_PCI=m
# CONFIG_8139CP is not set
# CONFIG_8139TOO is not set
# CONFIG_SIS900 is not set
# CONFIG_EPIC100 is not set
# CONFIG_SUNDANCE is not set
# CONFIG_TLAN is not set
# CONFIG_VIA_RHINE is not set
# CONFIG_NET_POCKET is not set

#
# Ethernet (1000 Mbit)
#
# CONFIG_ACENIC is not set
# CONFIG_DL2K is not set
# CONFIG_E1000 is not set
# CONFIG_NS83820 is not set
# CONFIG_HAMACHI is not set
# CONFIG_YELLOWFIN is not set
# CONFIG_R8169 is not set
# CONFIG_SKGE is not set
# CONFIG_SK98LIN is not set
# CONFIG_VIA_VELOCITY is not set
# CONFIG_TIGON3 is not set

#
# Ethernet (10000 Mbit)
#
# CONFIG_IXGB is not set
# CONFIG_S2IO is not set

#
# Token Ring devices
#
# CONFIG_TR is not set

#
# Wireless LAN (non-hamradio)
#
# CONFIG_NET_RADIO is not set

#
# Wan interfaces
#
# CONFIG_WAN is not set
# CONFIG_FDDI is not set
# CONFIG_HIPPI is not set
# CONFIG_PLIP is not set
CONFIG_PPP=m
# CONFIG_PPP_MULTILINK is not set
CONFIG_PPP_FILTER=y
CONFIG_PPP_ASYNC=m
CONFIG_PPP_SYNC_TTY=m
CONFIG_PPP_DEFLATE=m
CONFIG_PPP_BSDCOMP=m
CONFIG_PPPOE=m
# CONFIG_SLIP is not set
# CONFIG_NET_FC is not set
# CONFIG_SHAPER is not set
# CONFIG_NETCONSOLE is not set

#
# ISDN subsystem
#
# CONFIG_ISDN is not set

#
# Telephony Support
#
# CONFIG_PHONE is not set

#
# Input device support
#
CONFIG_INPUT=y

#
# Userland interfaces
#
CONFIG_INPUT_MOUSEDEV=y
CONFIG_INPUT_MOUSEDEV_PSAUX=y
CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
CONFIG_INPUT_JOYDEV=m
# CONFIG_INPUT_TSDEV is not set
# CONFIG_INPUT_EVDEV is not set
# CONFIG_INPUT_EVBUG is not set

#
# Input Device Drivers
#
CONFIG_INPUT_KEYBOARD=y
CONFIG_KEYBOARD_ATKBD=y
# CONFIG_KEYBOARD_SUNKBD is not set
# CONFIG_KEYBOARD_LKKBD is not set
# CONFIG_KEYBOARD_XTKBD is not set
# CONFIG_KEYBOARD_NEWTON is not set
CONFIG_INPUT_MOUSE=y
CONFIG_MOUSE_PS2=y
# CONFIG_MOUSE_SERIAL is not set
# CONFIG_MOUSE_INPORT is not set
# CONFIG_MOUSE_LOGIBM is not set
# CONFIG_MOUSE_PC110PAD is not set
# CONFIG_MOUSE_VSXXXAA is not set
CONFIG_INPUT_JOYSTICK=y
CONFIG_JOYSTICK_ANALOG=m
# CONFIG_JOYSTICK_A3D is not set
# CONFIG_JOYSTICK_ADI is not set
# CONFIG_JOYSTICK_COBRA is not set
# CONFIG_JOYSTICK_GF2K is not set
# CONFIG_JOYSTICK_GRIP is not set
# CONFIG_JOYSTICK_GRIP_MP is not set
# CONFIG_JOYSTICK_GUILLEMOT is not set
# CONFIG_JOYSTICK_INTERACT is not set
# CONFIG_JOYSTICK_SIDEWINDER is not set
# CONFIG_JOYSTICK_TMDC is not set
# CONFIG_JOYSTICK_IFORCE is not set
# CONFIG_JOYSTICK_WARRIOR is not set
# CONFIG_JOYSTICK_MAGELLAN is not set
# CONFIG_JOYSTICK_SPACEORB is not set
# CONFIG_JOYSTICK_SPACEBALL is not set
# CONFIG_JOYSTICK_STINGER is not set
# CONFIG_JOYSTICK_TWIDJOY is not set
# CONFIG_JOYSTICK_DB9 is not set
# CONFIG_JOYSTICK_GAMECON is not set
# CONFIG_JOYSTICK_TURBOGRAFX is not set
# CONFIG_JOYSTICK_JOYDUMP is not set
# CONFIG_INPUT_TOUCHSCREEN is not set
CONFIG_INPUT_MISC=y
CONFIG_INPUT_PCSPKR=m
# CONFIG_INPUT_UINPUT is not set

#
# Hardware I/O ports
#
CONFIG_SERIO=y
CONFIG_SERIO_I8042=y
# CONFIG_SERIO_SERPORT is not set
# CONFIG_SERIO_CT82C710 is not set
# CONFIG_SERIO_PARKBD is not set
# CONFIG_SERIO_PCIPS2 is not set
CONFIG_SERIO_LIBPS2=y
# CONFIG_SERIO_RAW is not set
CONFIG_GAMEPORT=m
# CONFIG_GAMEPORT_NS558 is not set
# CONFIG_GAMEPORT_L4 is not set
# CONFIG_GAMEPORT_EMU10K1 is not set
# CONFIG_GAMEPORT_VORTEX is not set
# CONFIG_GAMEPORT_FM801 is not set
# CONFIG_GAMEPORT_CS461X is not set
CONFIG_SOUND_GAMEPORT=m

#
# Character devices
#
CONFIG_VT=y
CONFIG_VT_CONSOLE=y
CONFIG_HW_CONSOLE=y
CONFIG_INOTIFY=y
# CONFIG_SERIAL_NONSTANDARD is not set

#
# Serial drivers
#
CONFIG_SERIAL_8250=m
# CONFIG_SERIAL_8250_ACPI is not set
CONFIG_SERIAL_8250_NR_UARTS=4
# CONFIG_SERIAL_8250_EXTENDED is not set

#
# Non-8250 serial port support
#
CONFIG_SERIAL_CORE=m
CONFIG_UNIX98_PTYS=y
# CONFIG_LEGACY_PTYS is not set
CONFIG_PRINTER=m
# CONFIG_LP_CONSOLE is not set
# CONFIG_PPDEV is not set
# CONFIG_TIPAR is not set

#
# IPMI
#
# CONFIG_IPMI_HANDLER is not set

#
# Watchdog Cards
#
# CONFIG_WATCHDOG is not set
# CONFIG_HW_RANDOM is not set
# CONFIG_NVRAM is not set
CONFIG_RTC=m
# CONFIG_GEN_RTC is not set
# CONFIG_DTLK is not set
# CONFIG_R3964 is not set
# CONFIG_APPLICOM is not set
# CONFIG_SONYPI is not set

#
# Ftape, the floppy tape device driver
#
# CONFIG_FTAPE is not set
CONFIG_AGP=m
# CONFIG_AGP_ALI is not set
# CONFIG_AGP_ATI is not set
# CONFIG_AGP_AMD is not set
# CONFIG_AGP_AMD64 is not set
# CONFIG_AGP_INTEL is not set
# CONFIG_AGP_NVIDIA is not set
# CONFIG_AGP_SIS is not set
# CONFIG_AGP_SWORKS is not set
CONFIG_AGP_VIA=m
# CONFIG_AGP_EFFICEON is not set
CONFIG_DRM=m
# CONFIG_DRM_TDFX is not set
# CONFIG_DRM_R128 is not set
# CONFIG_DRM_RADEON is not set
# CONFIG_DRM_MGA is not set
# CONFIG_DRM_SIS is not set
# CONFIG_DRM_VIA is not set
# CONFIG_MWAVE is not set
# CONFIG_RAW_DRIVER is not set
# CONFIG_HPET is not set
# CONFIG_HANGCHECK_TIMER is not set

#
# TPM devices
#
# CONFIG_TCG_TPM is not set

#
# I2C support
#
CONFIG_I2C=y
CONFIG_I2C_CHARDEV=m

#
# I2C Algorithms
#
CONFIG_I2C_ALGOBIT=y
CONFIG_I2C_ALGOPCF=m
# CONFIG_I2C_ALGOPCA is not set

#
# I2C Hardware Bus support
#
# CONFIG_I2C_ALI1535 is not set
# CONFIG_I2C_ALI1563 is not set
# CONFIG_I2C_ALI15X3 is not set
# CONFIG_I2C_AMD756 is not set
# CONFIG_I2C_AMD8111 is not set
# CONFIG_I2C_ELEKTOR is not set
# CONFIG_I2C_I801 is not set
# CONFIG_I2C_I810 is not set
CONFIG_I2C_ISA=m
# CONFIG_I2C_NFORCE2 is not set
# CONFIG_I2C_PARPORT is not set
# CONFIG_I2C_PARPORT_LIGHT is not set
# CONFIG_I2C_PIIX4 is not set
# CONFIG_I2C_PROSAVAGE is not set
# CONFIG_I2C_SAVAGE4 is not set
# CONFIG_SCx200_ACB is not set
# CONFIG_I2C_SIS5595 is not set
# CONFIG_I2C_SIS630 is not set
# CONFIG_I2C_SIS96X is not set
# CONFIG_I2C_STUB is not set
CONFIG_I2C_VIA=m
CONFIG_I2C_VIAPRO=m
# CONFIG_I2C_VOODOO3 is not set
# CONFIG_I2C_PCA_ISA is not set

#
# Hardware Sensors Chip support
#
CONFIG_I2C_SENSOR=m
# CONFIG_SENSORS_ADM1021 is not set
# CONFIG_SENSORS_ADM1025 is not set
# CONFIG_SENSORS_ADM1026 is not set
# CONFIG_SENSORS_ADM1031 is not set
# CONFIG_SENSORS_ASB100 is not set
# CONFIG_SENSORS_DS1621 is not set
# CONFIG_SENSORS_FSCHER is not set
# CONFIG_SENSORS_FSCPOS is not set
# CONFIG_SENSORS_GL518SM is not set
# CONFIG_SENSORS_GL520SM is not set
# CONFIG_SENSORS_IT87 is not set
# CONFIG_SENSORS_LM63 is not set
# CONFIG_SENSORS_LM75 is not set
# CONFIG_SENSORS_LM77 is not set
# CONFIG_SENSORS_LM78 is not set
CONFIG_SENSORS_LM80=m
# CONFIG_SENSORS_LM83 is not set
# CONFIG_SENSORS_LM85 is not set
# CONFIG_SENSORS_LM87 is not set
# CONFIG_SENSORS_LM90 is not set
# CONFIG_SENSORS_MAX1619 is not set
# CONFIG_SENSORS_PC87360 is not set
# CONFIG_SENSORS_SMSC47B397 is not set
# CONFIG_SENSORS_SIS5595 is not set
# CONFIG_SENSORS_SMSC47M1 is not set
CONFIG_SENSORS_VIA686A=m
CONFIG_SENSORS_W83781D=m
# CONFIG_SENSORS_W83L785TS is not set
# CONFIG_SENSORS_W83627HF is not set

#
# Other I2C Chip support
#
# CONFIG_SENSORS_EEPROM is not set
# CONFIG_SENSORS_PCF8574 is not set
# CONFIG_SENSORS_PCF8591 is not set
# CONFIG_SENSORS_RTC8564 is not set
# CONFIG_I2C_DEBUG_CORE is not set
# CONFIG_I2C_DEBUG_ALGO is not set
# CONFIG_I2C_DEBUG_BUS is not set
# CONFIG_I2C_DEBUG_CHIP is not set

#
# Dallas's 1-wire bus
#
# CONFIG_W1 is not set

#
# SuperIO subsystem support
#

#
# Misc devices
#
# CONFIG_IBM_ASM is not set

#
# Multimedia devices
#
CONFIG_VIDEO_DEV=m

#
# Video For Linux
#

#
# Video Adapters
#
# CONFIG_VIDEO_BT848 is not set
# CONFIG_VIDEO_PMS is not set
# CONFIG_VIDEO_BWQCAM is not set
# CONFIG_VIDEO_CQCAM is not set
# CONFIG_VIDEO_W9966 is not set
# CONFIG_VIDEO_CPIA is not set
# CONFIG_VIDEO_SAA5246A is not set
# CONFIG_VIDEO_SAA5249 is not set
# CONFIG_TUNER_3036 is not set
# CONFIG_VIDEO_STRADIS is not set
# CONFIG_VIDEO_ZORAN is not set
# CONFIG_VIDEO_SAA7134 is not set
# CONFIG_VIDEO_MXB is not set
# CONFIG_VIDEO_DPC is not set
# CONFIG_VIDEO_HEXIUM_ORION is not set
# CONFIG_VIDEO_HEXIUM_GEMINI is not set
# CONFIG_VIDEO_CX88 is not set
# CONFIG_VIDEO_OVCAMCHIP is not set

#
# Radio Adapters
#
# CONFIG_RADIO_CADET is not set
# CONFIG_RADIO_RTRACK is not set
# CONFIG_RADIO_RTRACK2 is not set
# CONFIG_RADIO_AZTECH is not set
# CONFIG_RADIO_GEMTEK is not set
# CONFIG_RADIO_GEMTEK_PCI is not set
# CONFIG_RADIO_MAXIRADIO is not set
# CONFIG_RADIO_MAESTRO is not set
# CONFIG_RADIO_SF16FMI is not set
# CONFIG_RADIO_SF16FMR2 is not set
# CONFIG_RADIO_TERRATEC is not set
# CONFIG_RADIO_TRUST is not set
# CONFIG_RADIO_TYPHOON is not set
# CONFIG_RADIO_ZOLTRIX is not set

#
# Digital Video Broadcasting Devices
#
# CONFIG_DVB is not set

#
# Graphics support
#
CONFIG_FB=y
CONFIG_FB_CFB_FILLRECT=y
CONFIG_FB_CFB_COPYAREA=y
CONFIG_FB_CFB_IMAGEBLIT=y
CONFIG_FB_SOFT_CURSOR=y
CONFIG_FB_MODE_HELPERS=y
# CONFIG_FB_TILEBLITTING is not set
# CONFIG_FB_CIRRUS is not set
# CONFIG_FB_PM2 is not set
# CONFIG_FB_CYBER2000 is not set
# CONFIG_FB_ASILIANT is not set
# CONFIG_FB_IMSTT is not set
# CONFIG_FB_VGA16 is not set
CONFIG_FB_VESA=y
CONFIG_VIDEO_SELECT=y
# CONFIG_FB_HGA is not set
CONFIG_FB_NVIDIA=y
CONFIG_FB_NVIDIA_I2C=y
CONFIG_FB_RIVA=y
CONFIG_FB_RIVA_I2C=y
# CONFIG_FB_RIVA_DEBUG is not set
# CONFIG_FB_I810 is not set
# CONFIG_FB_INTEL is not set
# CONFIG_FB_MATROX is not set
# CONFIG_FB_RADEON_OLD is not set
# CONFIG_FB_RADEON is not set
# CONFIG_FB_ATY128 is not set
# CONFIG_FB_ATY is not set
# CONFIG_FB_SAVAGE is not set
# CONFIG_FB_SIS is not set
# CONFIG_FB_NEOMAGIC is not set
# CONFIG_FB_KYRO is not set
# CONFIG_FB_3DFX is not set
# CONFIG_FB_VOODOO1 is not set
# CONFIG_FB_TRIDENT is not set
# CONFIG_FB_GEODE is not set
# CONFIG_FB_VIRTUAL is not set

#
# Console display driver support
#
CONFIG_VGA_CONSOLE=y
# CONFIG_MDA_CONSOLE is not set
CONFIG_DUMMY_CONSOLE=y
CONFIG_FRAMEBUFFER_CONSOLE=y
# CONFIG_FONTS is not set
CONFIG_FONT_8x8=y
CONFIG_FONT_8x16=y

#
# Logo configuration
#
CONFIG_LOGO=y
CONFIG_LOGO_LINUX_MONO=y
CONFIG_LOGO_LINUX_VGA16=y
CONFIG_LOGO_LINUX_CLUT224=y
# CONFIG_BACKLIGHT_LCD_SUPPORT is not set

#
# Sound
#
CONFIG_SOUND=m

#
# Advanced Linux Sound Architecture
#
CONFIG_SND=m
CONFIG_SND_TIMER=m
CONFIG_SND_PCM=m
CONFIG_SND_RAWMIDI=m
CONFIG_SND_SEQUENCER=m
# CONFIG_SND_SEQ_DUMMY is not set
CONFIG_SND_OSSEMUL=y
CONFIG_SND_MIXER_OSS=m
CONFIG_SND_PCM_OSS=m
CONFIG_SND_SEQUENCER_OSS=y
# CONFIG_SND_RTCTIMER is not set
# CONFIG_SND_VERBOSE_PRINTK is not set
# CONFIG_SND_DEBUG is not set

#
# Generic devices
#
# CONFIG_SND_DUMMY is not set
# CONFIG_SND_VIRMIDI is not set
# CONFIG_SND_MTPAV is not set
# CONFIG_SND_SERIAL_U16550 is not set
# CONFIG_SND_MPU401 is not set

#
# ISA devices
#
# CONFIG_SND_AD1848 is not set
# CONFIG_SND_CS4231 is not set
# CONFIG_SND_CS4232 is not set
# CONFIG_SND_CS4236 is not set
# CONFIG_SND_ES1688 is not set
# CONFIG_SND_ES18XX is not set
# CONFIG_SND_GUSCLASSIC is not set
# CONFIG_SND_GUSEXTREME is not set
# CONFIG_SND_GUSMAX is not set
# CONFIG_SND_INTERWAVE is not set
# CONFIG_SND_INTERWAVE_STB is not set
# CONFIG_SND_OPTI92X_AD1848 is not set
# CONFIG_SND_OPTI92X_CS4231 is not set
# CONFIG_SND_OPTI93X is not set
# CONFIG_SND_SB8 is not set
# CONFIG_SND_SB16 is not set
# CONFIG_SND_SBAWE is not set
# CONFIG_SND_WAVEFRONT is not set
# CONFIG_SND_CMI8330 is not set
# CONFIG_SND_OPL3SA2 is not set
# CONFIG_SND_SGALAXY is not set
# CONFIG_SND_SSCAPE is not set

#
# PCI devices
#
CONFIG_SND_AC97_CODEC=m
# CONFIG_SND_ALI5451 is not set
# CONFIG_SND_ATIIXP is not set
# CONFIG_SND_ATIIXP_MODEM is not set
# CONFIG_SND_AU8810 is not set
# CONFIG_SND_AU8820 is not set
# CONFIG_SND_AU8830 is not set
# CONFIG_SND_AZT3328 is not set
# CONFIG_SND_BT87X is not set
# CONFIG_SND_CS46XX is not set
# CONFIG_SND_CS4281 is not set
# CONFIG_SND_EMU10K1 is not set
# CONFIG_SND_EMU10K1X is not set
# CONFIG_SND_CA0106 is not set
# CONFIG_SND_KORG1212 is not set
# CONFIG_SND_MIXART is not set
# CONFIG_SND_NM256 is not set
# CONFIG_SND_RME32 is not set
# CONFIG_SND_RME96 is not set
# CONFIG_SND_RME9652 is not set
# CONFIG_SND_HDSP is not set
# CONFIG_SND_TRIDENT is not set
# CONFIG_SND_YMFPCI is not set
# CONFIG_SND_ALS4000 is not set
# CONFIG_SND_CMIPCI is not set
# CONFIG_SND_ENS1370 is not set
CONFIG_SND_ENS1371=m
# CONFIG_SND_ES1938 is not set
# CONFIG_SND_ES1968 is not set
# CONFIG_SND_MAESTRO3 is not set
# CONFIG_SND_FM801 is not set
# CONFIG_SND_ICE1712 is not set
#CONFIG_SND_ICE1724 is not set
# CONFIG_SND_INTEL8X0 is not set
# CONFIG_SND_INTEL8X0M is not set
# CONFIG_SND_SONICVIBES is not set
# CONFIG_SND_VIA82XX is not set
# CONFIG_SND_VIA82XX_MODEM is not set
# CONFIG_SND_VX222 is not set
# CONFIG_SND_HDA_INTEL is not set

#
# USB devices
#
# CONFIG_SND_USB_AUDIO is not set
# CONFIG_SND_USB_USX2Y is not set

#
# Open Sound System
#
# CONFIG_SOUND_PRIME is not set

#
# USB support
#
CONFIG_USB_ARCH_HAS_HCD=y
CONFIG_USB_ARCH_HAS_OHCI=y
CONFIG_USB=m
# CONFIG_USB_DEBUG is not set

#
# Miscellaneous USB options
#
CONFIG_USB_DEVICEFS=y
CONFIG_USB_BANDWIDTH=y
CONFIG_USB_DYNAMIC_MINORS=y
CONFIG_USB_SUSPEND=y
# CONFIG_USB_OTG is not set

#
# USB Host Controller Drivers
#
CONFIG_USB_EHCI_HCD=m
# CONFIG_USB_EHCI_SPLIT_ISO is not set
CONFIG_USB_EHCI_ROOT_HUB_TT=y
# CONFIG_USB_OHCI_HCD is not set
CONFIG_USB_UHCI_HCD=m
# CONFIG_USB_SL811_HCD is not set

#
# USB Device Class drivers
#
# CONFIG_USB_AUDIO is not set
# CONFIG_USB_BLUETOOTH_TTY is not set
# CONFIG_USB_MIDI is not set
# CONFIG_USB_ACM is not set
# CONFIG_USB_PRINTER is not set

#
# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' may also be needed; see USB_STORAGE Help for more information #
CONFIG_USB_STORAGE=m
# CONFIG_USB_STORAGE_DEBUG is not set
CONFIG_USB_STORAGE_RW_DETECT=y
# CONFIG_USB_STORAGE_DATAFAB is not set
# CONFIG_USB_STORAGE_FREECOM is not set
# CONFIG_USB_STORAGE_ISD200 is not set
# CONFIG_USB_STORAGE_DPCM is not set
# CONFIG_USB_STORAGE_USBAT is not set
# CONFIG_USB_STORAGE_SDDR09 is not set
# CONFIG_USB_STORAGE_SDDR55 is not set
# CONFIG_USB_STORAGE_JUMPSHOT is not set

#
# USB Input Devices
#
CONFIG_USB_HID=m
CONFIG_USB_HIDINPUT=y
# CONFIG_HID_FF is not set
# CONFIG_USB_HIDDEV is not set

#
# USB HID Boot Protocol drivers
#
# CONFIG_USB_KBD is not set
# CONFIG_USB_MOUSE is not set
# CONFIG_USB_AIPTEK is not set
# CONFIG_USB_WACOM is not set
# CONFIG_USB_KBTAB is not set
# CONFIG_USB_POWERMATE is not set
# CONFIG_USB_MTOUCH is not set
# CONFIG_USB_EGALAX is not set
# CONFIG_USB_XPAD is not set
# CONFIG_USB_ATI_REMOTE is not set

#
# USB Imaging devices
#
# CONFIG_USB_MDC800 is not set
# CONFIG_USB_MICROTEK is not set

#
# USB Multimedia devices
#
# CONFIG_USB_DABUSB is not set
# CONFIG_USB_VICAM is not set
# CONFIG_USB_DSBR is not set
# CONFIG_USB_IBMCAM is not set
# CONFIG_USB_KONICAWC is not set
# CONFIG_USB_OV511 is not set
# CONFIG_USB_SE401 is not set
# CONFIG_USB_SN9C102 is not set
# CONFIG_USB_STV680 is not set

#
# USB Network Adapters
#
# CONFIG_USB_CATC is not set
# CONFIG_USB_KAWETH is not set
# CONFIG_USB_PEGASUS is not set
# CONFIG_USB_RTL8150 is not set
CONFIG_USB_USBNET=m

#
# USB Host-to-Host Cables
#
# CONFIG_USB_ALI_M5632 is not set
# CONFIG_USB_AN2720 is not set
# CONFIG_USB_BELKIN is not set
# CONFIG_USB_GENESYS is not set
# CONFIG_USB_NET1080 is not set
# CONFIG_USB_PL2301 is not set
# CONFIG_USB_KC2190 is not set

#
# Intelligent USB Devices/Gadgets
#
# CONFIG_USB_ARMLINUX is not set
# CONFIG_USB_EPSON2888 is not set
# CONFIG_USB_ZAURUS is not set
CONFIG_USB_CDCETHER=y

#
# USB Network Adapters
#
# CONFIG_USB_AX8817X is not set
# CONFIG_USB_MON is not set

#
# USB port drivers
#
# CONFIG_USB_USS720 is not set

#
# USB Serial Converter support
#
# CONFIG_USB_SERIAL is not set

#
# USB Miscellaneous drivers
#
# CONFIG_USB_EMI62 is not set
# CONFIG_USB_EMI26 is not set
# CONFIG_USB_AUERSWALD is not set
# CONFIG_USB_RIO500 is not set
# CONFIG_USB_LEGOTOWER is not set
# CONFIG_USB_LCD is not set
# CONFIG_USB_LED is not set
# CONFIG_USB_CYTHERM is not set
# CONFIG_USB_PHIDGETKIT is not set
# CONFIG_USB_PHIDGETSERVO is not set
# CONFIG_USB_IDMOUSE is not set
# CONFIG_USB_SISUSBVGA is not set
# CONFIG_USB_TEST is not set

#
# USB ATM/DSL drivers
#

#
# USB Gadget Support
#
# CONFIG_USB_GADGET is not set

#
# MMC/SD Card support
#
# CONFIG_MMC is not set

#
# InfiniBand support
#
# CONFIG_INFINIBAND is not set

#
# File systems
#
CONFIG_EXT2_FS=y
CONFIG_EXT2_FS_XATTR=y
# CONFIG_EXT2_FS_POSIX_ACL is not set
# CONFIG_EXT2_FS_SECURITY is not set
CONFIG_EXT3_FS=y
CONFIG_EXT3_FS_XATTR=y
CONFIG_EXT3_FS_POSIX_ACL=y
# CONFIG_EXT3_FS_SECURITY is not set
CONFIG_JBD=y
# CONFIG_JBD_DEBUG is not set
CONFIG_FS_MBCACHE=y
CONFIG_REISER4_FS=m
# CONFIG_REISER4_CHECK is not set
CONFIG_REISERFS_FS=m
# CONFIG_REISERFS_CHECK is not set
# CONFIG_REISERFS_PROC_INFO is not set
# CONFIG_REISERFS_FS_XATTR is not set
# CONFIG_JFS_FS is not set
CONFIG_FS_POSIX_ACL=y

#
# XFS support
#
# CONFIG_XFS_FS is not set
# CONFIG_MINIX_FS is not set
# CONFIG_ROMFS_FS is not set
# CONFIG_QUOTA is not set
CONFIG_DNOTIFY=y
# CONFIG_AUTOFS_FS is not set
CONFIG_AUTOFS4_FS=m

#
# Caches
#
# CONFIG_FSCACHE is not set
# CONFIG_FUSE_FS is not set

#
# CD-ROM/DVD Filesystems
#
CONFIG_ISO9660_FS=m
CONFIG_JOLIET=y
# CONFIG_ZISOFS is not set
CONFIG_UDF_FS=m
CONFIG_UDF_NLS=y

#
# DOS/FAT/NT Filesystems
#
CONFIG_FAT_FS=m
CONFIG_MSDOS_FS=m
CONFIG_VFAT_FS=m
CONFIG_FAT_DEFAULT_CODEPAGE=850
CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
CONFIG_NTFS_FS=m
# CONFIG_NTFS_DEBUG is not set
# CONFIG_NTFS_RW is not set

#
# Pseudo filesystems
#
CONFIG_PROC_FS=y
CONFIG_PROC_KCORE=y
CONFIG_SYSFS=y
# CONFIG_DEVFS_FS is not set
# CONFIG_DEVPTS_FS_XATTR is not set
CONFIG_TMPFS=y
# CONFIG_TMPFS_XATTR is not set
# CONFIG_HUGETLBFS is not set
# CONFIG_HUGETLB_PAGE is not set
CONFIG_RAMFS=y

#
# Miscellaneous filesystems
#
# CONFIG_ADFS_FS is not set
# CONFIG_AFFS_FS is not set
# CONFIG_HFS_FS is not set
# CONFIG_HFSPLUS_FS is not set
# CONFIG_BEFS_FS is not set
# CONFIG_BFS_FS is not set
# CONFIG_EFS_FS is not set
# CONFIG_CRAMFS is not set
# CONFIG_VXFS_FS is not set
# CONFIG_HPFS_FS is not set
# CONFIG_QNX4FS_FS is not set
# CONFIG_SYSV_FS is not set
# CONFIG_UFS_FS is not set

#
# Network File Systems
#
CONFIG_NFS_FS=m
CONFIG_NFS_V3=y
# CONFIG_NFS_ACL is not set
CONFIG_NFS_V4=y
# CONFIG_NFS_DIRECTIO is not set
CONFIG_NFSD=m
CONFIG_NFSD_V3=y
# CONFIG_NFSD_ACL is not set
CONFIG_NFSD_V4=y
CONFIG_NFSD_TCP=y
CONFIG_LOCKD=m
CONFIG_LOCKD_V4=y
CONFIG_EXPORTFS=m
CONFIG_SUNRPC=m
CONFIG_SUNRPC_GSS=m
CONFIG_RPCSEC_GSS_KRB5=m
# CONFIG_RPCSEC_GSS_SPKM3 is not set
CONFIG_SMB_FS=m
# CONFIG_SMB_NLS_DEFAULT is not set
# CONFIG_CIFS is not set
# CONFIG_NCP_FS is not set
# CONFIG_CODA_FS is not set
# CONFIG_AFS_FS is not set

#
# Partition Types
#
CONFIG_PARTITION_ADVANCED=y
# CONFIG_ACORN_PARTITION is not set
# CONFIG_OSF_PARTITION is not set
# CONFIG_AMIGA_PARTITION is not set
# CONFIG_ATARI_PARTITION is not set
# CONFIG_MAC_PARTITION is not set
CONFIG_MSDOS_PARTITION=y
# CONFIG_BSD_DISKLABEL is not set
# CONFIG_MINIX_SUBPARTITION is not set
# CONFIG_SOLARIS_X86_PARTITION is not set
# CONFIG_UNIXWARE_DISKLABEL is not set
# CONFIG_LDM_PARTITION is not set
# CONFIG_SGI_PARTITION is not set
# CONFIG_ULTRIX_PARTITION is not set
# CONFIG_SUN_PARTITION is not set
# CONFIG_EFI_PARTITION is not set

#
# Native Language Support
#
CONFIG_NLS=y
CONFIG_NLS_DEFAULT="iso8859-1"
CONFIG_NLS_CODEPAGE_437=m
# CONFIG_NLS_CODEPAGE_737 is not set
# CONFIG_NLS_CODEPAGE_775 is not set
CONFIG_NLS_CODEPAGE_850=m
# CONFIG_NLS_CODEPAGE_852 is not set
# CONFIG_NLS_CODEPAGE_855 is not set
# CONFIG_NLS_CODEPAGE_857 is not set
# CONFIG_NLS_CODEPAGE_860 is not set
# CONFIG_NLS_CODEPAGE_861 is not set
# CONFIG_NLS_CODEPAGE_862 is not set
# CONFIG_NLS_CODEPAGE_863 is not set
# CONFIG_NLS_CODEPAGE_864 is not set
# CONFIG_NLS_CODEPAGE_865 is not set
# CONFIG_NLS_CODEPAGE_866 is not set
# CONFIG_NLS_CODEPAGE_869 is not set
# CONFIG_NLS_CODEPAGE_936 is not set
# CONFIG_NLS_CODEPAGE_950 is not set
# CONFIG_NLS_CODEPAGE_932 is not set
# CONFIG_NLS_CODEPAGE_949 is not set
# CONFIG_NLS_CODEPAGE_874 is not set
# CONFIG_NLS_ISO8859_8 is not set
# CONFIG_NLS_CODEPAGE_1250 is not set
# CONFIG_NLS_CODEPAGE_1251 is not set
CONFIG_NLS_ASCII=m
CONFIG_NLS_ISO8859_1=m
# CONFIG_NLS_ISO8859_2 is not set
# CONFIG_NLS_ISO8859_3 is not set
# CONFIG_NLS_ISO8859_4 is not set
# CONFIG_NLS_ISO8859_5 is not set
# CONFIG_NLS_ISO8859_6 is not set
# CONFIG_NLS_ISO8859_7 is not set
# CONFIG_NLS_ISO8859_9 is not set
# CONFIG_NLS_ISO8859_13 is not set
# CONFIG_NLS_ISO8859_14 is not set
CONFIG_NLS_ISO8859_15=m
# CONFIG_NLS_KOI8_R is not set
# CONFIG_NLS_KOI8_U is not set
# CONFIG_NLS_UTF8 is not set

#
# Profiling support
#
# CONFIG_PROFILING is not set

#
# Kernel hacking
#
CONFIG_DEBUG_KERNEL=y
CONFIG_MAGIC_SYSRQ=y
CONFIG_LOG_BUF_SHIFT=14
CONFIG_DETECT_SOFTLOCKUP=y
# CONFIG_PRINTK_TIME is not set
# CONFIG_SCHEDSTATS is not set
# CONFIG_DEBUG_SLAB is not set
# CONFIG_DEBUG_SPINLOCK is not set
CONFIG_DEBUG_SPINLOCK_SLEEP=y
# CONFIG_DEBUG_KOBJECT is not set
CONFIG_DEBUG_BUGVERBOSE=y
# CONFIG_DEBUG_INFO is not set
# CONFIG_PAGE_OWNER is not set
# CONFIG_DEBUG_FS is not set
CONFIG_FRAME_POINTER=y
CONFIG_EARLY_PRINTK=y
CONFIG_DEBUG_STACKOVERFLOW=y
# CONFIG_KPROBES is not set
# CONFIG_DEBUG_STACK_USAGE is not set
# CONFIG_DEBUG_PAGEALLOC is not set
# CONFIG_4KSTACKS is not set
CONFIG_X86_FIND_SMP_CONFIG=y
CONFIG_X86_MPPARSE=y
# CONFIG_KGDB is not set

#
# Security options
#
# CONFIG_KEYS is not set
# CONFIG_SECURITY is not set

#
# Cryptographic options
#
CONFIG_CRYPTO=y
CONFIG_CRYPTO_HMAC=y
# CONFIG_CRYPTO_NULL is not set
# CONFIG_CRYPTO_MD4 is not set
CONFIG_CRYPTO_MD5=m
CONFIG_CRYPTO_SHA1=m
# CONFIG_CRYPTO_SHA256 is not set
# CONFIG_CRYPTO_SHA512 is not set
# CONFIG_CRYPTO_WP512 is not set
CONFIG_CRYPTO_DES=m
CONFIG_CRYPTO_BLOWFISH=m
# CONFIG_CRYPTO_TWOFISH is not set
# CONFIG_CRYPTO_SERPENT is not set
CONFIG_CRYPTO_AES_586=m
# CONFIG_CRYPTO_CAST5 is not set
# CONFIG_CRYPTO_CAST6 is not set
# CONFIG_CRYPTO_TEA is not set
# CONFIG_CRYPTO_ARC4 is not set
# CONFIG_CRYPTO_KHAZAD is not set
# CONFIG_CRYPTO_ANUBIS is not set
CONFIG_CRYPTO_DEFLATE=m
CONFIG_CRYPTO_MICHAEL_MIC=m
CONFIG_CRYPTO_CRC32C=m
# CONFIG_CRYPTO_TEST is not set

#
# Hardware crypto devices
#
# CONFIG_CRYPTO_DEV_PADLOCK is not set

#
# Library routines
#
CONFIG_CRC_CCITT=m
CONFIG_CRC32=y
CONFIG_LIBCRC32C=m
CONFIG_ZLIB_INFLATE=m
CONFIG_ZLIB_DEFLATE=m
CONFIG_GENERIC_HARDIRQS=y
CONFIG_GENERIC_IRQ_PROBE=y
CONFIG_X86_BIOS_REBOOT=y

#6 lore raw

Re: 2.6.11-rc4-mm1 : IDE crazy numbers, hdb renumbered to hdq ?

Quoted 25 lines · Laurent Riffard

Le 23.02.2005 21:12, Andrew Morton a ?crit :

Quoted 16 lines
Quoted 14 lines · Helge Hafting

This kernel came up, but my boot script complained about no /dev/hdb3 when trying to mount /var.
(I have two IDE disks on the same cable, and an IDE cdrom on another.) They are usually hda, hdb, and hdc.

MAKEDEV hdq did not help. Looking at sysfs, it turns out that /dev/hdq1 is at major:3 minor:1025 if I interpret things right. (/dev/hda1 is at 3:1, which is correct.)
These numbers did not work with my mknod, it created 7:1 instead. So I didn't get to test this mysterious device.

But I assume this is a mistake of some sort, I haven't heard about any change in the IDE numbering coming up? 2.6.1-rc3-mm1 works as expected.

Quoted 7 lines
Quoted 2 lines

It may be interesting to note that my root raid-1 came up fine, consisting of hdq1 and hda1 instead of the usual hdb1 and hda1.

I don't know what could be causing that. Please send .config. If you set CONFIG_BASE_FULL=n, try setting it to `y'.

Quoted 6 lines

this is just a "me too"...

Here is some few lines from dmesg :

hdb: cache flushes supported
hdq: hdq1 hdq2 < hdq5 hdq6 hdq7 hdq8 >

Neat.

Quoted 15 lines

~$ ls -l /dev/hd*

brw-rw----  1 root    disk   3,    0 f?v 23 22:45 /dev/hda
brw-rw----  1 root    disk   3,    1 f?v 23 22:45 /dev/hda1
brw-rw----  1 root    disk   3,   10 f?v 23 22:45 /dev/hda10
brw-rw----  1 root    disk   3,    2 f?v 23 22:45 /dev/hda2
brw-rw----  1 root    disk   3,    3 f?v 23 22:45 /dev/hda3
brw-rw----  1 root    disk   3,    4 f?v 23 22:45 /dev/hda4
brw-rw----  1 root    disk   3,    5 f?v 23 22:45 /dev/hda5
brw-rw----  1 root    disk   3,    6 f?v 23 22:45 /dev/hda6
brw-rw----  1 root    disk   3,    7 f?v 23 22:45 /dev/hda7
brw-rw----  1 root    disk   3,    8 f?v 23 22:45 /dev/hda8
brw-rw----  1 root    disk   3,    9 f?v 23 22:45 /dev/hda9
brw-rw----  1 laurent cdrom 22,    0 f?v 23 22:45 /dev/hdc
brw-------  1 root    root  22,   64 f?v 23 22:45 /dev/hdd
brw-rw----  1 root    disk   3, 1024 f?v 23 22:45 /dev/hdq

Looks like you're using udev.

Quoted 2 lines

CONFIG_BASE_FULL=y
CONFIG_BASE_SMALL=0

Ok, that's unrelated to the weird IDE numbering then.

Signature · 1 line
Mathematics is the supreme nostalgia of our time.
#7 lore raw

Re: 2.6.11-rc4-mm1 : IDE crazy numbers, hdb renumbered to hdq ?

In reply to Laurent Riffard
Quoted 22 lines · Laurent Riffard
Quoted 20 lines · Andrew Morton
Quoted 16 lines · Helge Hafting

This kernel came up, but my boot script complained about no /dev/hdb3 when trying to mount /var.
(I have two IDE disks on the same cable, and an IDE cdrom on another.) They are usually hda, hdb, and hdc.

MAKEDEV hdq did not help. Looking at sysfs, it turns out that /dev/hdq1 is at major:3 minor:1025 if I interpret things right. (/dev/hda1 is at 3:1, which is correct.)
These numbers did not work with my mknod, it created 7:1 instead. So I didn't get to test this mysterious device.

But I assume this is a mistake of some sort, I haven't heard about any change in the IDE numbering coming up? 2.6.1-rc3-mm1 works as expected.

It may be interesting to note that my root raid-1 came up fine, consisting of hdq1 and hda1 instead of the usual hdb1 and hda1.

Quoted 5 lines
Quoted 3 lines

I don't know what could be causing that. Please send .config. If you set CONFIG_BASE_FULL=n, try setting it to `y'.

this is just a "me too"...

Confusing. Are you saying that the hdd->hdq problem is happening even with CONFIG_BASE_FULL=y?

#8 lore raw

Re: 2.6.11-rc4-mm1 : IDE crazy numbers, hdb renumbered to hdq ?

Quoted 29 lines · Andrew Morton
Quoted 27 lines · Laurent Riffard
Quoted 24 lines · Andrew Morton
Quoted 11 lines · Helge Hafting

This kernel came up, but my boot script complained about no /dev/hdb3 when trying to mount /var.
(I have two IDE disks on the same cable, and an IDE cdrom on another.) They are usually hda, hdb, and hdc.

MAKEDEV hdq did not help. Looking at sysfs, it turns out that /dev/hdq1 is at major:3 minor:1025 if I interpret things right. (/dev/hda1 is at 3:1, which is correct.)
These numbers did not work with my mknod, it created 7:1 instead. So I didn't get to test this mysterious device.

Quoted 5 lines

But I assume this is a mistake of some sort, I haven't heard about any change in the IDE numbering coming up? 2.6.1-rc3-mm1 works as expected.

It may be interesting to note that my root raid-1 came up fine, consisting of hdq1 and hda1 instead of the usual hdb1 and hda1.

I don't know what could be causing that. Please send .config. If you set CONFIG_BASE_FULL=n, try setting it to `y'.

Quoted 6 lines
Quoted 1 line

this is just a "me too"...

Confusing. Are you saying that the hdd->hdq problem is happening even with CONFIG_BASE_FULL=y?

yes, I do.

--
laurent

#9 lore raw

Re: 2.6.11-rc4-mm1 : IDE crazy numbers, hdb renumbered to hdq ?

In reply to Laurent Riffard
Quoted 18 lines · Laurent Riffard

hey, what's this /dev/hds ? digging into /sys/block...

~$ ls -l /sys/block/hds/device
lrwxrwxrwx 1 root root 0 f?v 23 22:45 /sys/block/hds/device -> ../../devices/pci0000:00/0000:00:04.1/ide1/1.1/

/dev/hdq should be /dev/hdd...

~$ ls -l /proc/ide
total 4

-r--r--r--  1 root root 0 f?v 23 23:28 drivers
lrwxrwxrwx  1 root root 8 f?v 23 23:28 hda -> ide0/hda/
lrwxrwxrwx  1 root root 8 f?v 23 23:28 hdb -> ide0/hdb/
lrwxrwxrwx  1 root root 8 f?v 23 23:28 hdc -> ide1/hdc/
lrwxrwxrwx  1 root root 8 f?v 23 23:28 hdd -> ide1/hdd/
dr-xr-xr-x  4 root root 0 f?v 23 23:28 ide0/
dr-xr-xr-x  4 root root 0 f?v 23 23:28 ide1/
-r--r--r--  1 root root 0 f?v 23 23:28 via
Quoted 2 lines

~$ ls -d /sys/block/hd*
/sys/block/hda/ /sys/block/hdc/ /sys/block/hdq/ /sys/block/hds/

What does /proc/devices show?

thanks,

greg k-h

#10 lore raw

Re: 2.6.11-rc4-mm1 : IDE crazy numbers, hdb renumbered to hdq ?

Quoted 10 lines · Greg KH
Quoted 8 lines · Laurent Riffard

hey, what's this /dev/hds ? digging into /sys/block...

~$ ls -l /sys/block/hds/device
lrwxrwxrwx 1 root root 0 f?v 23 22:45 /sys/block/hds/device -> ../../devices/pci0000:00/0000:00:04.1/ide1/1.1/

/dev/hdq should be /dev/hdd...

Quoted 15 lines
Quoted 10 lines

~$ ls -l /proc/ide
total 4

-r--r--r--  1 root root 0 f?v 23 23:28 drivers
lrwxrwxrwx  1 root root 8 f?v 23 23:28 hda -> ide0/hda/
lrwxrwxrwx  1 root root 8 f?v 23 23:28 hdb -> ide0/hdb/
lrwxrwxrwx  1 root root 8 f?v 23 23:28 hdc -> ide1/hdc/
lrwxrwxrwx  1 root root 8 f?v 23 23:28 hdd -> ide1/hdd/
dr-xr-xr-x  4 root root 0 f?v 23 23:28 ide0/
dr-xr-xr-x  4 root root 0 f?v 23 23:28 ide1/
-r--r--r--  1 root root 0 f?v 23 23:28 via
Quoted 2 lines

~$ ls -d /sys/block/hd*
/sys/block/hda/ /sys/block/hdc/ /sys/block/hdq/ /sys/block/hds/

What does /proc/devices show?

Character devices:
1 mem
4 /dev/vc/0
4 tty
5 /dev/tty
5 /dev/console
5 /dev/ptmx
6 lp
7 vcs
10 misc
13 input
14 sound
29 fb
116 alsa
128 ptm
136 pts
171 ieee1394
180 usb

Block devices:
1 ramdisk
2 fd
3 ide0
7 loop
22 ide1
253 pktcdvd
254 device-mapper

Do you see something strange here ?

--
laurent

#11 lore raw

Re: 2.6.11-rc4-mm1 : IDE crazy numbers, hdb renumbered to hdq ?

Quoted 57 lines · Laurent Riffard

Le 24.02.2005 00:47, Greg KH a ?crit :

Quoted 10 lines · Laurent Riffard
Quoted 9 lines

hey, what's this /dev/hds ? digging into /sys/block...

~$ ls -l /sys/block/hds/device
lrwxrwxrwx 1 root root 0 f?v 23 22:45 /sys/block/hds/device -> ../../devices/pci0000:00/0000:00:04.1/ide1/1.1/

/dev/hdq should be /dev/hdd...

Quoted 15 lines
Quoted 10 lines

~$ ls -l /proc/ide
total 4

-r--r--r--  1 root root 0 f?v 23 23:28 drivers
lrwxrwxrwx  1 root root 8 f?v 23 23:28 hda -> ide0/hda/
lrwxrwxrwx  1 root root 8 f?v 23 23:28 hdb -> ide0/hdb/
lrwxrwxrwx  1 root root 8 f?v 23 23:28 hdc -> ide1/hdc/
lrwxrwxrwx  1 root root 8 f?v 23 23:28 hdd -> ide1/hdd/
dr-xr-xr-x  4 root root 0 f?v 23 23:28 ide0/
dr-xr-xr-x  4 root root 0 f?v 23 23:28 ide1/
-r--r--r--  1 root root 0 f?v 23 23:28 via
Quoted 2 lines

~$ ls -d /sys/block/hd*
/sys/block/hda/ /sys/block/hdc/ /sys/block/hdq/ /sys/block/hds/

What does /proc/devices show?

Character devices:
1 mem
4 /dev/vc/0
4 tty
5 /dev/tty
5 /dev/console
5 /dev/ptmx
6 lp
7 vcs
10 misc
13 input
14 sound
29 fb
116 alsa
128 ptm
136 pts
171 ieee1394
180 usb

Block devices:
1 ramdisk
2 fd
3 ide0
7 loop
22 ide1
253 pktcdvd
254 device-mapper

Quoted 1 line

Do you see something strange here ?

No, ide0 is 3 and ide1 is 22, which is "standard". Hm, what's that pktcdvd and device-mapper doing there? Do you need those drivers? Can you try it without building them and see if that helps?

thanks,

greg k-h

#12 lore raw

Re: 2.6.11-rc4-mm1 : IDE crazy numbers, hdb renumbered to hdq ?

Quoted 60 lines · Greg KH
Quoted 58 lines · Laurent Riffard

Le 24.02.2005 00:47, Greg KH a ?crit :

Quoted 11 lines · Laurent Riffard
Quoted 10 lines

hey, what's this /dev/hds ? digging into /sys/block...

~$ ls -l /sys/block/hds/device
lrwxrwxrwx 1 root root 0 f?v 23 22:45 /sys/block/hds/device -> ../../devices/pci0000:00/0000:00:04.1/ide1/1.1/

/dev/hdq should be /dev/hdd...

Quoted 15 lines
Quoted 10 lines

~$ ls -l /proc/ide
total 4

-r--r--r--  1 root root 0 f?v 23 23:28 drivers
lrwxrwxrwx  1 root root 8 f?v 23 23:28 hda -> ide0/hda/
lrwxrwxrwx  1 root root 8 f?v 23 23:28 hdb -> ide0/hdb/
lrwxrwxrwx  1 root root 8 f?v 23 23:28 hdc -> ide1/hdc/
lrwxrwxrwx  1 root root 8 f?v 23 23:28 hdd -> ide1/hdd/
dr-xr-xr-x  4 root root 0 f?v 23 23:28 ide0/
dr-xr-xr-x  4 root root 0 f?v 23 23:28 ide1/
-r--r--r--  1 root root 0 f?v 23 23:28 via
Quoted 2 lines

~$ ls -d /sys/block/hd*
/sys/block/hda/ /sys/block/hdc/ /sys/block/hdq/ /sys/block/hds/

What does /proc/devices show?

Character devices:
1 mem
4 /dev/vc/0
4 tty
5 /dev/tty
5 /dev/console
5 /dev/ptmx
6 lp
7 vcs
10 misc
13 input
14 sound
29 fb
116 alsa
128 ptm
136 pts
171 ieee1394
180 usb

Block devices:
1 ramdisk
2 fd
3 ide0
7 loop
22 ide1
253 pktcdvd
254 device-mapper

Quoted 6 lines
Quoted 1 line

Do you see something strange here ?

No, ide0 is 3 and ide1 is 22, which is "standard". Hm, what's that pktcdvd and device-mapper doing there? Do you need those drivers? Can you try it without building them and see if that helps?

I do need device-mapper, since I put /usr and /var on LVM filesystems. I use ptkcdvd to copy data to CD-RW. I can remove this one.

Anyway, this patch from Andrew fixed the problem :
http://lkml.org/lkml/2005/2/23/214.

So I won't try to remove pktcdvd and device-mapper driver (except if you _really_ want me to do so).

Thanks for your interest.
--
laurent

#13 lore raw

Re: 2.6.11-rc4-mm1 : IDE crazy numbers, hdb renumbered to hdq ?

Quoted 5 lines · Laurent Riffard

I do need device-mapper, since I put /usr and /var on LVM filesystems. I use ptkcdvd to copy data to CD-RW. I can remove this one.

Anyway, this patch from Andrew fixed the problem :
http://lkml.org/lkml/2005/2/23/214.

Yeah, it's not in my code! :)

Quoted 2 lines

So I won't try to remove pktcdvd and device-mapper driver (except if you _really_ want me to do so).

Nope, as long as the above patch works for you, I'm happy.

thanks,

greg k-h

#14 lore raw

Re: 2.6.11-rc4-mm1 : IDE crazy numbers, hdb renumbered to hdq ?

In reply to Andrew Morton

Andrew Morton <[email protected]> disait dernièrement que :

Quoted 13 lines
Quoted 12 lines · Helge Hafting

This kernel came up, but my boot script complained about no /dev/hdb3
when trying to mount /var.
(I have two IDE disks on the same cable, and an IDE cdrom on another.) They are usually hda, hdb, and hdc.

MAKEDEV hdq did not help. Looking at sysfs, it turns out that /dev/hdq1 is at major:3 minor:1025 if I interpret things right. (/dev/hda1 is at 3:1, which is correct.)
These numbers did not work with my mknod, it created 7:1 instead. So I didn't get to test this mysterious device.

Quoted 8 lines
Quoted 5 lines

But I assume this is a mistake of some sort, I haven't heard about any change in the IDE numbering coming up? 2.6.1-rc3-mm1 works as expected.

It may be interesting to note that my root raid-1 came up fine, consisting of hdq1 and hda1 instead of the usual hdb1 and hda1.

I don't know what could be causing that. Please send .config. If you set CONFIG_BASE_FULL=n, try setting it to `y'.

I've got the same problem here on my box, udev creates hds and hdu entries when running 2.6.11-rc4-mm1, whereas it creates correctly hdf et hdh, on other kernels.

here follows .config:

#
# Automatically generated make config: don't edit
# Linux kernel version: 2.6.11-rc4-mm1
# Wed Feb 23 22:11:44 2005
#
CONFIG_X86=y
CONFIG_MMU=y
CONFIG_UID16=y
CONFIG_GENERIC_ISA_DMA=y
CONFIG_GENERIC_IOMAP=y

#
# Code maturity level options
#
CONFIG_EXPERIMENTAL=y
CONFIG_CLEAN_COMPILE=y
CONFIG_BROKEN_ON_SMP=y
CONFIG_LOCK_KERNEL=y

#
# General setup
#
CONFIG_LOCALVERSION=""
CONFIG_SWAP=y
CONFIG_SYSVIPC=y
CONFIG_POSIX_MQUEUE=y
CONFIG_BSD_PROCESS_ACCT=y
CONFIG_BSD_PROCESS_ACCT_V3=y
CONFIG_SYSCTL=y
# CONFIG_AUDIT is not set
CONFIG_HOTPLUG=y
CONFIG_KOBJECT_UEVENT=y
CONFIG_IKCONFIG=y
CONFIG_IKCONFIG_PROC=y
# CONFIG_EMBEDDED is not set
CONFIG_KALLSYMS=y
# CONFIG_KALLSYMS_ALL is not set
# CONFIG_KALLSYMS_EXTRA_PASS is not set
CONFIG_BASE_FULL=y
CONFIG_BASE_SMALL=0
CONFIG_FUTEX=y
CONFIG_EPOLL=y
CONFIG_SHMEM=y
CONFIG_CC_ALIGN_FUNCTIONS=0
CONFIG_CC_ALIGN_LABELS=0
CONFIG_CC_ALIGN_LOOPS=0
CONFIG_CC_ALIGN_JUMPS=0
# CONFIG_TINY_SHMEM is not set

#
# Loadable module support
#
CONFIG_MODULES=y
CONFIG_MODULE_UNLOAD=y
# CONFIG_MODULE_FORCE_UNLOAD is not set
CONFIG_OBSOLETE_MODPARM=y
# CONFIG_MODVERSIONS is not set
# CONFIG_MODULE_SRCVERSION_ALL is not set
CONFIG_KMOD=y

#
# Processor type and features
#
CONFIG_X86_PC=y
# CONFIG_X86_ELAN is not set
# CONFIG_X86_VOYAGER is not set
# CONFIG_X86_NUMAQ is not set
# CONFIG_X86_SUMMIT is not set
# CONFIG_X86_BIGSMP is not set
# CONFIG_X86_VISWS is not set
# CONFIG_X86_GENERICARCH is not set
# CONFIG_X86_ES7000 is not set
# CONFIG_M386 is not set
# CONFIG_M486 is not set
# CONFIG_M586 is not set
# CONFIG_M586TSC is not set
# CONFIG_M586MMX is not set
# CONFIG_M686 is not set
# CONFIG_MPENTIUMII is not set
# CONFIG_MPENTIUMIII is not set
# CONFIG_MPENTIUMM is not set
# CONFIG_MPENTIUM4 is not set
# CONFIG_MK6 is not set
CONFIG_MK7=y
# CONFIG_MK8 is not set
# CONFIG_MCRUSOE is not set
# CONFIG_MEFFICEON is not set
# CONFIG_MWINCHIPC6 is not set
# CONFIG_MWINCHIP2 is not set
# CONFIG_MWINCHIP3D is not set
# CONFIG_MCYRIXIII is not set
# CONFIG_MVIAC3_2 is not set
# CONFIG_X86_GENERIC is not set
CONFIG_X86_CMPXCHG=y
CONFIG_X86_XADD=y
CONFIG_X86_L1_CACHE_SHIFT=6
CONFIG_RWSEM_XCHGADD_ALGORITHM=y
CONFIG_GENERIC_CALIBRATE_DELAY=y
CONFIG_X86_WP_WORKS_OK=y
CONFIG_X86_INVLPG=y
CONFIG_X86_BSWAP=y
CONFIG_X86_POPAD_OK=y
CONFIG_X86_GOOD_APIC=y
CONFIG_X86_INTEL_USERCOPY=y
CONFIG_X86_USE_PPRO_CHECKSUM=y
CONFIG_X86_USE_3DNOW=y
# CONFIG_HPET_TIMER is not set
# CONFIG_SMP is not set
CONFIG_PREEMPT=y
CONFIG_PREEMPT_BKL=y
CONFIG_X86_UP_APIC=y
CONFIG_X86_UP_IOAPIC=y
CONFIG_X86_LOCAL_APIC=y
CONFIG_X86_IO_APIC=y
CONFIG_X86_TSC=y
CONFIG_X86_MCE=y
CONFIG_X86_MCE_NONFATAL=m
# CONFIG_X86_MCE_P4THERMAL is not set
# CONFIG_TOSHIBA is not set
# CONFIG_I8K is not set
# CONFIG_MICROCODE is not set
# CONFIG_X86_MSR is not set
# CONFIG_X86_CPUID is not set

#
# Firmware Drivers
#
# CONFIG_EDD is not set
# CONFIG_NOHIGHMEM is not set
CONFIG_HIGHMEM4G=y
# CONFIG_HIGHMEM64G is not set
CONFIG_HIGHMEM=y
CONFIG_HIGHPTE=y
# CONFIG_MATH_EMULATION is not set
CONFIG_MTRR=y
# CONFIG_EFI is not set
CONFIG_HAVE_DEC_LOCK=y
CONFIG_REGPARM=y
CONFIG_SECCOMP=y

#
# Performance-monitoring counters support
#
# CONFIG_PERFCTR is not set
CONFIG_PHYSICAL_START=0x100000
CONFIG_KEXEC=y

#
# Power management options (ACPI, APM)
#
# CONFIG_PM is not set

#
# ACPI (Advanced Configuration and Power Interface) Support #
CONFIG_ACPI=y
CONFIG_ACPI_BOOT=y
CONFIG_ACPI_INTERPRETER=y
CONFIG_ACPI_AC=m
CONFIG_ACPI_BATTERY=m
CONFIG_ACPI_BUTTON=m
# CONFIG_ACPI_VIDEO is not set
CONFIG_ACPI_FAN=m
CONFIG_ACPI_PROCESSOR=m
CONFIG_ACPI_THERMAL=m
# CONFIG_ACPI_ASUS is not set
# CONFIG_ACPI_IBM is not set
# CONFIG_ACPI_TOSHIBA is not set
CONFIG_ACPI_PCC=m
CONFIG_ACPI_SONY=m
CONFIG_ACPI_BLACKLIST_YEAR=0
# CONFIG_ACPI_DEBUG is not set
CONFIG_ACPI_BUS=y
CONFIG_ACPI_EC=y
CONFIG_ACPI_POWER=y
CONFIG_ACPI_PCI=y
CONFIG_ACPI_SYSTEM=y
# CONFIG_X86_PM_TIMER is not set
# CONFIG_ACPI_CONTAINER is not set

#
# CPU Frequency scaling
#
# CONFIG_CPU_FREQ is not set

#
# Bus options (PCI, PCMCIA, EISA, MCA, ISA)
#
CONFIG_PCI=y
# CONFIG_PCI_GOBIOS is not set
# CONFIG_PCI_GOMMCONFIG is not set
# CONFIG_PCI_GODIRECT is not set
CONFIG_PCI_GOANY=y
CONFIG_PCI_BIOS=y
CONFIG_PCI_DIRECT=y
CONFIG_PCI_MMCONFIG=y
# CONFIG_PCIEPORTBUS is not set
# CONFIG_PCI_MSI is not set
# CONFIG_PCI_LEGACY_PROC is not set
CONFIG_PCI_NAMES=y
# CONFIG_ISA is not set
# CONFIG_MCA is not set
# CONFIG_SCx200 is not set

#
# PCCARD (PCMCIA/CardBus) support
#
# CONFIG_PCCARD is not set

#
# PCI Hotplug Support
#
# CONFIG_HOTPLUG_PCI is not set

#
# Executable file formats
#
CONFIG_BINFMT_ELF=y
CONFIG_BINFMT_AOUT=m
CONFIG_BINFMT_MISC=m

#
# Device Drivers
#

#
# Generic Driver Options
#
CONFIG_STANDALONE=y
CONFIG_PREVENT_FIRMWARE_BUILD=y
CONFIG_FW_LOADER=m
# CONFIG_DEBUG_DRIVER is not set

#
# Connector - unified userspace <-> kernelspace linker #
# CONFIG_CONNECTOR is not set

#
# Memory Technology Devices (MTD)
#
# CONFIG_MTD is not set

#
# Parallel port support
#
# CONFIG_PARPORT is not set

#
# Plug and Play support
#
# CONFIG_PNP is not set

#
# Block devices
#
CONFIG_BLK_DEV_FD=m
# CONFIG_BLK_CPQ_DA is not set
# CONFIG_BLK_CPQ_CISS_DA is not set
# CONFIG_BLK_DEV_DAC960 is not set
# CONFIG_BLK_DEV_UMEM is not set
# CONFIG_BLK_DEV_COW_COMMON is not set
CONFIG_BLK_DEV_LOOP=m
# CONFIG_BLK_DEV_CRYPTOLOOP is not set
# CONFIG_BLK_DEV_NBD is not set
# CONFIG_BLK_DEV_SX8 is not set
# CONFIG_BLK_DEV_UB is not set
# CONFIG_BLK_DEV_RAM is not set
CONFIG_BLK_DEV_RAM_COUNT=16
CONFIG_INITRAMFS_SOURCE=""
# CONFIG_LBD is not set
CONFIG_CDROM_PKTCDVD=m
CONFIG_CDROM_PKTCDVD_BUFFERS=8
# CONFIG_CDROM_PKTCDVD_WCACHE is not set

#
# IO Schedulers
#
CONFIG_IOSCHED_NOOP=y
CONFIG_IOSCHED_AS=m
CONFIG_IOSCHED_DEADLINE=m
CONFIG_IOSCHED_CFQ=y
# CONFIG_ATA_OVER_ETH is not set

#
# ATA/ATAPI/MFM/RLL support
#
CONFIG_IDE=y
CONFIG_BLK_DEV_IDE=y

#
# Please see Documentation/ide.txt for help/info on IDE drives #
# CONFIG_BLK_DEV_IDE_SATA is not set
# CONFIG_BLK_DEV_HD_IDE is not set CONFIG_BLK_DEV_IDEDISK=y
CONFIG_IDEDISK_MULTI_MODE=y
CONFIG_BLK_DEV_IDECD=m
# CONFIG_BLK_DEV_IDETAPE is not set
# CONFIG_BLK_DEV_IDEFLOPPY is not set
# CONFIG_BLK_DEV_IDESCSI is not set
# CONFIG_IDE_TASK_IOCTL is not set

#
# IDE chipset support/bugfixes
#
CONFIG_IDE_GENERIC=y
# CONFIG_BLK_DEV_CMD640 is not set
CONFIG_BLK_DEV_IDEPCI=y
CONFIG_IDEPCI_SHARE_IRQ=y
# CONFIG_BLK_DEV_OFFBOARD is not set
CONFIG_BLK_DEV_GENERIC=y
# CONFIG_BLK_DEV_OPTI621 is not set
# CONFIG_BLK_DEV_RZ1000 is not set
CONFIG_BLK_DEV_IDEDMA_PCI=y
# CONFIG_BLK_DEV_IDEDMA_FORCED is not set
CONFIG_IDEDMA_PCI_AUTO=y
# CONFIG_IDEDMA_ONLYDISK is not set
# CONFIG_BLK_DEV_AEC62XX is not set
# CONFIG_BLK_DEV_ALI15X3 is not set
# CONFIG_BLK_DEV_AMD74XX is not set
# CONFIG_BLK_DEV_ATIIXP is not set
# CONFIG_BLK_DEV_CMD64X is not set
# CONFIG_BLK_DEV_TRIFLEX is not set
# CONFIG_BLK_DEV_CY82C693 is not set
# CONFIG_BLK_DEV_CS5520 is not set
# CONFIG_BLK_DEV_CS5530 is not set
# CONFIG_BLK_DEV_HPT34X is not set
# CONFIG_BLK_DEV_HPT366 is not set
# CONFIG_BLK_DEV_SC1200 is not set
# CONFIG_BLK_DEV_PIIX is not set
# CONFIG_BLK_DEV_NS87415 is not set
# CONFIG_BLK_DEV_PDC202XX_OLD is not set
# CONFIG_BLK_DEV_PDC202XX_NEW is not set
# CONFIG_BLK_DEV_SVWKS is not set
CONFIG_BLK_DEV_SIIMAGE=m
# CONFIG_BLK_DEV_SIS5513 is not set
# CONFIG_BLK_DEV_SLC90E66 is not set
# CONFIG_BLK_DEV_TRM290 is not set
CONFIG_BLK_DEV_VIA82CXXX=y
# CONFIG_IDE_ARM is not set
CONFIG_BLK_DEV_IDEDMA=y
# CONFIG_IDEDMA_IVB is not set
CONFIG_IDEDMA_AUTO=y
# CONFIG_BLK_DEV_HD is not set

#
# SCSI device support
#
CONFIG_SCSI=m
CONFIG_SCSI_PROC_FS=y

#
# SCSI support type (disk, tape, CD-ROM)
#
CONFIG_BLK_DEV_SD=m
# CONFIG_CHR_DEV_ST is not set
# CONFIG_CHR_DEV_OSST is not set
# CONFIG_BLK_DEV_SR is not set
CONFIG_CHR_DEV_SG=m
# CONFIG_CHR_DEV_SCH is not set

#
# Some SCSI devices (e.g. CD jukebox) support multiple LUNs #
# CONFIG_SCSI_MULTI_LUN is not set
# CONFIG_SCSI_CONSTANTS is not set
# CONFIG_SCSI_LOGGING is not set

#
# SCSI Transport Attributes
#
# CONFIG_SCSI_SPI_ATTRS is not set
# CONFIG_SCSI_FC_ATTRS is not set
# CONFIG_SCSI_ISCSI_ATTRS is not set

#
# SCSI low-level drivers
#
# CONFIG_BLK_DEV_3W_XXXX_RAID is not set
# CONFIG_SCSI_3W_9XXX is not set
# CONFIG_SCSI_ARCMSR is not set
# CONFIG_SCSI_ACARD is not set
# CONFIG_SCSI_AACRAID is not set
# CONFIG_SCSI_AIC7XXX is not set
# CONFIG_SCSI_AIC7XXX_OLD is not set
# CONFIG_SCSI_AIC79XX is not set
# CONFIG_SCSI_DPT_I2O is not set
# CONFIG_MEGARAID_NEWGEN is not set
# CONFIG_MEGARAID_LEGACY is not set
# CONFIG_SCSI_SATA is not set
# CONFIG_SCSI_BUSLOGIC is not set
# CONFIG_SCSI_DMX3191D is not set
# CONFIG_SCSI_EATA is not set
# CONFIG_SCSI_EATA_PIO is not set
# CONFIG_SCSI_FUTURE_DOMAIN is not set
# CONFIG_SCSI_GDTH is not set
# CONFIG_SCSI_IPS is not set
# CONFIG_SCSI_INITIO is not set
# CONFIG_SCSI_INIA100 is not set
# CONFIG_SCSI_SYM53C8XX_2 is not set
# CONFIG_SCSI_IPR is not set
# CONFIG_SCSI_QLOGIC_ISP is not set
# CONFIG_SCSI_QLOGIC_FC is not set
# CONFIG_SCSI_QLOGIC_1280 is not set
CONFIG_SCSI_QLA2XXX=m
# CONFIG_SCSI_QLA21XX is not set
# CONFIG_SCSI_QLA22XX is not set
# CONFIG_SCSI_QLA2300 is not set
# CONFIG_SCSI_QLA2322 is not set
# CONFIG_SCSI_QLA6312 is not set
# CONFIG_SCSI_DC395x is not set
# CONFIG_SCSI_DC390T is not set
# CONFIG_SCSI_NSP32 is not set
# CONFIG_SCSI_DEBUG is not set

#
# Multi-device support (RAID and LVM)
#
CONFIG_MD=y
CONFIG_BLK_DEV_MD=m
CONFIG_MD_LINEAR=m
CONFIG_MD_RAID0=m
CONFIG_MD_RAID1=m
CONFIG_MD_RAID10=m
CONFIG_MD_RAID5=m
CONFIG_MD_RAID6=m
# CONFIG_MD_MULTIPATH is not set
# CONFIG_MD_FAULTY is not set
CONFIG_BLK_DEV_DM=m
CONFIG_DM_CRYPT=m
CONFIG_DM_SNAPSHOT=m
CONFIG_DM_MIRROR=m
CONFIG_DM_ZERO=m
# CONFIG_DM_MULTIPATH is not set

#
# Fusion MPT device support
#
# CONFIG_FUSION is not set

#
# IEEE 1394 (FireWire) support
#
# CONFIG_IEEE1394 is not set

#
# I2O device support
#
# CONFIG_I2O is not set

#
# Networking support
#
CONFIG_NET=y

#
# Networking options
#
CONFIG_PACKET=m
CONFIG_PACKET_MMAP=y
# CONFIG_NETLINK_DEV is not set
CONFIG_UNIX=m
CONFIG_NET_KEY=m
CONFIG_INET=y
CONFIG_IP_MULTICAST=y
CONFIG_IP_ADVANCED_ROUTER=y
CONFIG_IP_MULTIPLE_TABLES=y
CONFIG_IP_ROUTE_FWMARK=y
CONFIG_IP_ROUTE_MULTIPATH=y
CONFIG_IP_ROUTE_VERBOSE=y
# CONFIG_IP_PNP is not set
# CONFIG_NET_IPIP is not set
# CONFIG_NET_IPGRE is not set
# CONFIG_IP_MROUTE is not set
# CONFIG_ARPD is not set
CONFIG_SYN_COOKIES=y
CONFIG_INET_AH=m
CONFIG_INET_ESP=m
CONFIG_INET_IPCOMP=m
CONFIG_INET_TUNNEL=m
# CONFIG_IP_TCPDIAG is not set
# CONFIG_IP_TCPDIAG_IPV6 is not set

#
# IP: Virtual Server Configuration
#
# CONFIG_IP_VS is not set
# CONFIG_IPV6 is not set
CONFIG_NETFILTER=y
# CONFIG_NETFILTER_DEBUG is not set

#
# IP: Netfilter Configuration
#
CONFIG_IP_NF_CONNTRACK=m
# CONFIG_IP_NF_CT_ACCT is not set
CONFIG_IP_NF_CONNTRACK_MARK=y
CONFIG_IP_NF_CT_PROTO_SCTP=m
CONFIG_IP_NF_FTP=m
CONFIG_IP_NF_IRC=m
CONFIG_IP_NF_TFTP=m
CONFIG_IP_NF_AMANDA=m
CONFIG_IP_NF_QUEUE=m
CONFIG_IP_NF_IPTABLES=m
CONFIG_IP_NF_MATCH_LIMIT=m
CONFIG_IP_NF_MATCH_IPRANGE=m
CONFIG_IP_NF_MATCH_MAC=m
CONFIG_IP_NF_MATCH_PKTTYPE=m
CONFIG_IP_NF_MATCH_MARK=m
CONFIG_IP_NF_MATCH_MULTIPORT=m
CONFIG_IP_NF_MATCH_TOS=m
CONFIG_IP_NF_MATCH_RECENT=m
CONFIG_IP_NF_MATCH_ECN=m
CONFIG_IP_NF_MATCH_DSCP=m
CONFIG_IP_NF_MATCH_AH_ESP=m
CONFIG_IP_NF_MATCH_LENGTH=m
CONFIG_IP_NF_MATCH_TTL=m
CONFIG_IP_NF_MATCH_TCPMSS=m
CONFIG_IP_NF_MATCH_HELPER=m
CONFIG_IP_NF_MATCH_STATE=m
CONFIG_IP_NF_MATCH_CONNTRACK=m
CONFIG_IP_NF_MATCH_OWNER=m
CONFIG_IP_NF_MATCH_ADDRTYPE=m
CONFIG_IP_NF_MATCH_REALM=m
CONFIG_IP_NF_MATCH_SCTP=m
CONFIG_IP_NF_MATCH_COMMENT=m
CONFIG_IP_NF_MATCH_CONNMARK=m
CONFIG_IP_NF_MATCH_HASHLIMIT=m
CONFIG_IP_NF_FILTER=m
CONFIG_IP_NF_TARGET_REJECT=m
CONFIG_IP_NF_TARGET_LOG=m
CONFIG_IP_NF_TARGET_ULOG=m
CONFIG_IP_NF_TARGET_TCPMSS=m
CONFIG_IP_NF_NAT=m
CONFIG_IP_NF_NAT_NEEDED=y
CONFIG_IP_NF_TARGET_MASQUERADE=m
CONFIG_IP_NF_TARGET_REDIRECT=m
CONFIG_IP_NF_TARGET_NETMAP=m
CONFIG_IP_NF_TARGET_SAME=m
CONFIG_IP_NF_NAT_SNMP_BASIC=m
CONFIG_IP_NF_NAT_IRC=m
CONFIG_IP_NF_NAT_FTP=m
CONFIG_IP_NF_NAT_TFTP=m
CONFIG_IP_NF_NAT_AMANDA=m
CONFIG_IP_NF_MANGLE=m
CONFIG_IP_NF_TARGET_TOS=m
CONFIG_IP_NF_TARGET_ECN=m
CONFIG_IP_NF_TARGET_DSCP=m
CONFIG_IP_NF_TARGET_MARK=m
CONFIG_IP_NF_TARGET_CLASSIFY=m
CONFIG_IP_NF_TARGET_CONNMARK=m
CONFIG_IP_NF_TARGET_CLUSTERIP=m
CONFIG_IP_NF_RAW=m
CONFIG_IP_NF_TARGET_NOTRACK=m
CONFIG_IP_NF_ARPTABLES=m
CONFIG_IP_NF_ARPFILTER=m
CONFIG_IP_NF_ARP_MANGLE=m
CONFIG_XFRM=y
CONFIG_XFRM_USER=m

#
# SCTP Configuration (EXPERIMENTAL)
#
# CONFIG_IP_SCTP is not set
# CONFIG_ATM is not set
# CONFIG_BRIDGE is not set
# CONFIG_VLAN_8021Q is not set
# CONFIG_DECNET is not set
# CONFIG_LLC2 is not set
# CONFIG_IPX is not set
# CONFIG_ATALK is not set
# CONFIG_X25 is not set
# CONFIG_LAPB is not set
# CONFIG_NET_DIVERT is not set
# CONFIG_ECONET is not set
# CONFIG_WAN_ROUTER is not set

#
# QoS and/or fair queueing
#
CONFIG_NET_SCHED=y
CONFIG_NET_SCH_CLK_JIFFIES=y
# CONFIG_NET_SCH_CLK_GETTIMEOFDAY is not set
# CONFIG_NET_SCH_CLK_CPU is not set
CONFIG_NET_SCH_CBQ=m
CONFIG_NET_SCH_HTB=m
CONFIG_NET_SCH_HFSC=m
CONFIG_NET_SCH_PRIO=m
CONFIG_NET_SCH_RED=m
CONFIG_NET_SCH_SFQ=m
CONFIG_NET_SCH_TEQL=m
CONFIG_NET_SCH_TBF=m
CONFIG_NET_SCH_GRED=m
CONFIG_NET_SCH_DSMARK=m
CONFIG_NET_SCH_NETEM=m
CONFIG_NET_SCH_INGRESS=m
CONFIG_NET_QOS=y
CONFIG_NET_ESTIMATOR=y
CONFIG_NET_CLS=y
CONFIG_NET_CLS_TCINDEX=m
CONFIG_NET_CLS_ROUTE4=m
CONFIG_NET_CLS_ROUTE=y
CONFIG_NET_CLS_FW=m
CONFIG_NET_CLS_U32=m
CONFIG_CLS_U32_PERF=y
# CONFIG_NET_CLS_IND is not set
CONFIG_CLS_U32_MARK=y
CONFIG_NET_CLS_RSVP=m
# CONFIG_NET_CLS_RSVP6 is not set
CONFIG_NET_CLS_ACT=y
CONFIG_NET_ACT_POLICE=m
CONFIG_NET_ACT_GACT=m
CONFIG_GACT_PROB=y
CONFIG_NET_ACT_MIRRED=m
CONFIG_NET_ACT_IPT=m
CONFIG_NET_ACT_PEDIT=m

#
# Network testing
#
# CONFIG_NET_PKTGEN is not set
# CONFIG_KGDBOE is not set
# CONFIG_NETPOLL is not set
# CONFIG_NETPOLL_RX is not set
# CONFIG_NETPOLL_TRAP is not set
# CONFIG_NET_POLL_CONTROLLER is not set
# CONFIG_HAMRADIO is not set
# CONFIG_IRDA is not set
# CONFIG_BT is not set
CONFIG_IEEE80211=m
# CONFIG_IEEE80211_DEBUG is not set
CONFIG_IEEE80211_CRYPT_WEP=m
CONFIG_IEEE80211_CRYPT_CCMP=m
CONFIG_IEEE80211_CRYPT_TKIP=m
CONFIG_NETDEVICES=y
CONFIG_DUMMY=m
# CONFIG_BONDING is not set
# CONFIG_EQUALIZER is not set
# CONFIG_TUN is not set

#
# ARCnet devices
#
# CONFIG_ARCNET is not set

#
# Ethernet (10 or 100Mbit)
#
CONFIG_NET_ETHERNET=y
CONFIG_MII=m
# CONFIG_HAPPYMEAL is not set
# CONFIG_SUNGEM is not set
CONFIG_NET_VENDOR_3COM=y
CONFIG_VORTEX=m
# CONFIG_TYPHOON is not set

#
# Tulip family network device support
#
# CONFIG_NET_TULIP is not set
# CONFIG_HP100 is not set
CONFIG_NET_PCI=y
# CONFIG_PCNET32 is not set
# CONFIG_AMD8111_ETH is not set
# CONFIG_ADAPTEC_STARFIRE is not set
# CONFIG_B44 is not set
# CONFIG_FORCEDETH is not set
# CONFIG_DGRS is not set
# CONFIG_EEPRO100 is not set
# CONFIG_E100 is not set
# CONFIG_FEALNX is not set
# CONFIG_NATSEMI is not set
# CONFIG_NE2K_PCI is not set
# CONFIG_8139CP is not set
CONFIG_8139TOO=m
# CONFIG_8139TOO_PIO is not set
# CONFIG_8139TOO_TUNE_TWISTER is not set
# CONFIG_8139TOO_8129 is not set
# CONFIG_8139_OLD_RX_RESET is not set
# CONFIG_SIS900 is not set
# CONFIG_EPIC100 is not set
# CONFIG_SUNDANCE is not set
# CONFIG_TLAN is not set
CONFIG_VIA_RHINE=m
CONFIG_VIA_RHINE_MMIO=y

#
# Ethernet (1000 Mbit)
#
# CONFIG_ACENIC is not set
# CONFIG_DL2K is not set
# CONFIG_E1000 is not set
# CONFIG_NS83820 is not set
# CONFIG_HAMACHI is not set
# CONFIG_YELLOWFIN is not set
# CONFIG_R8169 is not set
# CONFIG_SKGE is not set
# CONFIG_SK98LIN is not set
# CONFIG_VIA_VELOCITY is not set
# CONFIG_TIGON3 is not set

#
# Ethernet (10000 Mbit)
#
# CONFIG_IXGB is not set
# CONFIG_S2IO is not set

#
# Token Ring devices
#
# CONFIG_TR is not set

#
# Wireless LAN (non-hamradio)
#
CONFIG_NET_RADIO=y

#
# Obsolete Wireless cards support (pre-802.11)
#
# CONFIG_STRIP is not set

#
# Wireless 802.11b ISA/PCI cards support
#
CONFIG_HERMES=m
# CONFIG_PLX_HERMES is not set
# CONFIG_TMD_HERMES is not set
CONFIG_PCI_HERMES=m
# CONFIG_ATMEL is not set

#
# Prism GT/Duette 802.11(a/b/g) PCI/Cardbus support #
# CONFIG_PRISM54 is not set
CONFIG_HOSTAP=m
CONFIG_HOSTAP_WEP=m
CONFIG_HOSTAP_TKIP=m
CONFIG_HOSTAP_CCMP=m CONFIG_HOSTAP_FIRMWARE=y CONFIG_HOSTAP_PLX=m
CONFIG_HOSTAP_PCI=m
CONFIG_NET_WIRELESS=y

#
# Wan interfaces
#
# CONFIG_WAN is not set
# CONFIG_FDDI is not set
# CONFIG_HIPPI is not set
# CONFIG_PPP is not set
# CONFIG_SLIP is not set
# CONFIG_NET_FC is not set
# CONFIG_SHAPER is not set
# CONFIG_NETCONSOLE is not set

#
# ISDN subsystem
#
# CONFIG_ISDN is not set

#
# Telephony Support
#
# CONFIG_PHONE is not set

#
# Input device support
#
CONFIG_INPUT=y

#
# Userland interfaces
#
CONFIG_INPUT_MOUSEDEV=y
# CONFIG_INPUT_MOUSEDEV_PSAUX is not set
CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
# CONFIG_INPUT_JOYDEV is not set
# CONFIG_INPUT_TSDEV is not set
CONFIG_INPUT_EVDEV=m
# CONFIG_INPUT_EVBUG is not set

#
# Input Device Drivers
#
CONFIG_INPUT_KEYBOARD=y
CONFIG_KEYBOARD_ATKBD=y
# CONFIG_KEYBOARD_SUNKBD is not set
# CONFIG_KEYBOARD_LKKBD is not set
# CONFIG_KEYBOARD_XTKBD is not set
# CONFIG_KEYBOARD_NEWTON is not set
CONFIG_INPUT_MOUSE=y
# CONFIG_MOUSE_PS2 is not set
# CONFIG_MOUSE_SERIAL is not set
# CONFIG_MOUSE_VSXXXAA is not set
# CONFIG_INPUT_JOYSTICK is not set
# CONFIG_INPUT_TOUCHSCREEN is not set
# CONFIG_INPUT_MISC is not set

#
# Hardware I/O ports
#
CONFIG_SERIO=y
CONFIG_SERIO_I8042=y
CONFIG_SERIO_SERPORT=y
# CONFIG_SERIO_CT82C710 is not set
# CONFIG_SERIO_PCIPS2 is not set
CONFIG_SERIO_LIBPS2=y
CONFIG_SERIO_RAW=m
# CONFIG_GAMEPORT is not set
CONFIG_SOUND_GAMEPORT=y

#
# Character devices
#
CONFIG_VT=y
CONFIG_VT_CONSOLE=y
CONFIG_HW_CONSOLE=y
CONFIG_INOTIFY=y
# CONFIG_SERIAL_NONSTANDARD is not set

#
# Serial drivers
#
CONFIG_SERIAL_8250=m
# CONFIG_SERIAL_8250_ACPI is not set
CONFIG_SERIAL_8250_NR_UARTS=4
# CONFIG_SERIAL_8250_EXTENDED is not set

#
# Non-8250 serial port support
#
CONFIG_SERIAL_CORE=m
CONFIG_UNIX98_PTYS=y
# CONFIG_LEGACY_PTYS is not set

#
# IPMI
#
# CONFIG_IPMI_HANDLER is not set

#
# Watchdog Cards
#
# CONFIG_WATCHDOG is not set
# CONFIG_HW_RANDOM is not set
CONFIG_NVRAM=m
CONFIG_RTC=m
# CONFIG_GEN_RTC is not set
# CONFIG_DTLK is not set
# CONFIG_R3964 is not set
# CONFIG_APPLICOM is not set
# CONFIG_SONYPI is not set

#
# Ftape, the floppy tape device driver
#
# CONFIG_FTAPE is not set
CONFIG_AGP=m
# CONFIG_AGP_ALI is not set
# CONFIG_AGP_ATI is not set
# CONFIG_AGP_AMD is not set
# CONFIG_AGP_AMD64 is not set
# CONFIG_AGP_INTEL is not set
# CONFIG_AGP_NVIDIA is not set
# CONFIG_AGP_SIS is not set
# CONFIG_AGP_SWORKS is not set
CONFIG_AGP_VIA=m
# CONFIG_AGP_EFFICEON is not set
CONFIG_DRM=m
# CONFIG_DRM_TDFX is not set
# CONFIG_DRM_R128 is not set
CONFIG_DRM_RADEON=m
# CONFIG_DRM_MGA is not set
# CONFIG_DRM_SIS is not set
# CONFIG_DRM_VIA is not set
# CONFIG_MWAVE is not set
# CONFIG_RAW_DRIVER is not set
# CONFIG_HPET is not set
# CONFIG_HANGCHECK_TIMER is not set

#
# TPM devices
#
# CONFIG_TCG_TPM is not set

#
# I2C support
#
CONFIG_I2C=y
CONFIG_I2C_CHARDEV=m

#
# I2C Algorithms
#
CONFIG_I2C_ALGOBIT=y
# CONFIG_I2C_ALGOPCF is not set
# CONFIG_I2C_ALGOPCA is not set

#
# I2C Hardware Bus support
#
# CONFIG_I2C_ALI1535 is not set
# CONFIG_I2C_ALI1563 is not set
# CONFIG_I2C_ALI15X3 is not set
# CONFIG_I2C_AMD756 is not set
# CONFIG_I2C_AMD8111 is not set
# CONFIG_I2C_I801 is not set
# CONFIG_I2C_I810 is not set
CONFIG_I2C_ISA=m
# CONFIG_I2C_NFORCE2 is not set
# CONFIG_I2C_PARPORT_LIGHT is not set
# CONFIG_I2C_PIIX4 is not set
# CONFIG_I2C_PROSAVAGE is not set
# CONFIG_I2C_SAVAGE4 is not set
# CONFIG_SCx200_ACB is not set
# CONFIG_I2C_SIS5595 is not set
# CONFIG_I2C_SIS630 is not set
# CONFIG_I2C_SIS96X is not set
# CONFIG_I2C_STUB is not set
# CONFIG_I2C_VIA is not set
# CONFIG_I2C_VIAPRO is not set
# CONFIG_I2C_VOODOO3 is not set
# CONFIG_I2C_PCA_ISA is not set

#
# Hardware Sensors Chip support
#
CONFIG_I2C_SENSOR=m
# CONFIG_SENSORS_ADM1021 is not set
# CONFIG_SENSORS_ADM1025 is not set
# CONFIG_SENSORS_ADM1026 is not set
# CONFIG_SENSORS_ADM1031 is not set
# CONFIG_SENSORS_ASB100 is not set
# CONFIG_SENSORS_DS1621 is not set
# CONFIG_SENSORS_FSCHER is not set
# CONFIG_SENSORS_FSCPOS is not set
# CONFIG_SENSORS_GL518SM is not set
# CONFIG_SENSORS_GL520SM is not set
CONFIG_SENSORS_IT87=m
# CONFIG_SENSORS_LM63 is not set
# CONFIG_SENSORS_LM75 is not set
# CONFIG_SENSORS_LM77 is not set
# CONFIG_SENSORS_LM78 is not set
# CONFIG_SENSORS_LM80 is not set
# CONFIG_SENSORS_LM83 is not set
# CONFIG_SENSORS_LM85 is not set
# CONFIG_SENSORS_LM87 is not set
# CONFIG_SENSORS_LM90 is not set
# CONFIG_SENSORS_MAX1619 is not set
# CONFIG_SENSORS_PC87360 is not set
# CONFIG_SENSORS_SMSC47B397 is not set
# CONFIG_SENSORS_SIS5595 is not set
# CONFIG_SENSORS_SMSC47M1 is not set
# CONFIG_SENSORS_VIA686A is not set
# CONFIG_SENSORS_W83781D is not set
# CONFIG_SENSORS_W83L785TS is not set
# CONFIG_SENSORS_W83627HF is not set

#
# Other I2C Chip support
#
# CONFIG_SENSORS_EEPROM is not set
# CONFIG_SENSORS_PCF8574 is not set
# CONFIG_SENSORS_PCF8591 is not set
# CONFIG_SENSORS_RTC8564 is not set
# CONFIG_I2C_DEBUG_CORE is not set
# CONFIG_I2C_DEBUG_ALGO is not set
# CONFIG_I2C_DEBUG_BUS is not set
# CONFIG_I2C_DEBUG_CHIP is not set

#
# Dallas's 1-wire bus
#
# CONFIG_W1 is not set

#
# SuperIO subsystem support
#

#
# Misc devices
#
# CONFIG_IBM_ASM is not set

#
# Multimedia devices
#
CONFIG_VIDEO_DEV=m

#
# Video For Linux
#

#
# Video Adapters
#
CONFIG_VIDEO_BT848=m
# CONFIG_VIDEO_CPIA is not set
# CONFIG_VIDEO_SAA5246A is not set
# CONFIG_VIDEO_SAA5249 is not set
# CONFIG_TUNER_3036 is not set
# CONFIG_VIDEO_STRADIS is not set
# CONFIG_VIDEO_ZORAN is not set
# CONFIG_VIDEO_SAA7134 is not set
# CONFIG_VIDEO_MXB is not set
# CONFIG_VIDEO_DPC is not set
# CONFIG_VIDEO_HEXIUM_ORION is not set
# CONFIG_VIDEO_HEXIUM_GEMINI is not set
# CONFIG_VIDEO_CX88 is not set
# CONFIG_VIDEO_OVCAMCHIP is not set

#
# Radio Adapters
#
# CONFIG_RADIO_GEMTEK_PCI is not set
# CONFIG_RADIO_MAXIRADIO is not set
# CONFIG_RADIO_MAESTRO is not set

#
# Digital Video Broadcasting Devices
#
CONFIG_DVB=y
CONFIG_DVB_CORE=m

#
# Supported SAA7146 based PCI Adapters
#
# CONFIG_DVB_AV7110 is not set
# CONFIG_DVB_BUDGET is not set
# CONFIG_DVB_BUDGET_CI is not set
# CONFIG_DVB_BUDGET_AV is not set

#
# Supported USB Adapters
#
# CONFIG_DVB_TTUSB_BUDGET is not set
# CONFIG_DVB_TTUSB_DEC is not set
# CONFIG_DVB_DIBUSB is not set
# CONFIG_DVB_CINERGYT2 is not set

#
# Supported FlexCopII (B2C2) Adapters
#
# CONFIG_DVB_B2C2_SKYSTAR is not set
# CONFIG_DVB_B2C2_USB is not set

#
# Supported BT878 Adapters
#
CONFIG_DVB_BT8XX=m

#
# Supported DVB Frontends
#

#
# Customise DVB Frontends
#

#
# DVB-S (satellite) frontends
#
# CONFIG_DVB_STV0299 is not set
CONFIG_DVB_CX24110=m
# CONFIG_DVB_TDA8083 is not set
# CONFIG_DVB_TDA80XX is not set
# CONFIG_DVB_MT312 is not set
# CONFIG_DVB_VES1X93 is not set

#
# DVB-T (terrestrial) frontends
#
# CONFIG_DVB_SP8870 is not set
CONFIG_DVB_SP887X=m
# CONFIG_DVB_CX22700 is not set
# CONFIG_DVB_CX22702 is not set
# CONFIG_DVB_L64781 is not set
# CONFIG_DVB_TDA1004X is not set
CONFIG_DVB_NXT6000=m
CONFIG_DVB_MT352=m
# CONFIG_DVB_DIB3000MB is not set
# CONFIG_DVB_DIB3000MC is not set

#
# DVB-C (cable) frontends
#
# CONFIG_DVB_ATMEL_AT76C651 is not set
# CONFIG_DVB_VES1820 is not set
# CONFIG_DVB_TDA10021 is not set
# CONFIG_DVB_STV0297 is not set

#
# ATSC (North American/Korean Terresterial DTV) frontends #
# CONFIG_DVB_NXT2002 is not set CONFIG_VIDEO_TUNER=m
CONFIG_VIDEO_BUF=m
CONFIG_VIDEO_BTCX=m
CONFIG_VIDEO_IR=m
CONFIG_VIDEO_TVEEPROM=m

#
# Graphics support
#
CONFIG_FB=y
CONFIG_FB_CFB_FILLRECT=y
CONFIG_FB_CFB_COPYAREA=y
CONFIG_FB_CFB_IMAGEBLIT=y
CONFIG_FB_SOFT_CURSOR=y
CONFIG_FB_MODE_HELPERS=y
# CONFIG_FB_TILEBLITTING is not set
# CONFIG_FB_CIRRUS is not set
# CONFIG_FB_PM2 is not set
# CONFIG_FB_CYBER2000 is not set
# CONFIG_FB_ASILIANT is not set
# CONFIG_FB_IMSTT is not set
# CONFIG_FB_VGA16 is not set
# CONFIG_FB_VESA is not set
CONFIG_VIDEO_SELECT=y
# CONFIG_FB_HGA is not set
# CONFIG_FB_NVIDIA is not set
# CONFIG_FB_RIVA is not set
# CONFIG_FB_I810 is not set
# CONFIG_FB_INTEL is not set
# CONFIG_FB_MATROX is not set
# CONFIG_FB_RADEON_OLD is not set
CONFIG_FB_RADEON=y
CONFIG_FB_RADEON_I2C=y
# CONFIG_FB_RADEON_DEBUG is not set
# CONFIG_FB_ATY128 is not set
# CONFIG_FB_ATY is not set
# CONFIG_FB_SAVAGE is not set
# CONFIG_FB_SIS is not set
# CONFIG_FB_NEOMAGIC is not set
# CONFIG_FB_KYRO is not set
# CONFIG_FB_3DFX is not set
# CONFIG_FB_VOODOO1 is not set
# CONFIG_FB_TRIDENT is not set
# CONFIG_FB_GEODE is not set
# CONFIG_FB_VIRTUAL is not set

#
# Console display driver support
#
CONFIG_VGA_CONSOLE=y
CONFIG_DUMMY_CONSOLE=y
CONFIG_FRAMEBUFFER_CONSOLE=y
# CONFIG_FONTS is not set
CONFIG_FONT_8x8=y
CONFIG_FONT_8x16=y

#
# Logo configuration
#
CONFIG_LOGO=y
# CONFIG_LOGO_LINUX_MONO is not set
# CONFIG_LOGO_LINUX_VGA16 is not set
CONFIG_LOGO_LINUX_CLUT224=y
# CONFIG_BACKLIGHT_LCD_SUPPORT is not set

#
# Sound
#
CONFIG_SOUND=m

#
# Advanced Linux Sound Architecture
#
CONFIG_SND=m
CONFIG_SND_TIMER=m
CONFIG_SND_PCM=m
CONFIG_SND_HWDEP=m
CONFIG_SND_RAWMIDI=m
CONFIG_SND_SEQUENCER=m
CONFIG_SND_SEQ_DUMMY=m
CONFIG_SND_OSSEMUL=y
CONFIG_SND_MIXER_OSS=m
CONFIG_SND_PCM_OSS=m
CONFIG_SND_SEQUENCER_OSS=y
CONFIG_SND_RTCTIMER=m
# CONFIG_SND_VERBOSE_PRINTK is not set
# CONFIG_SND_DEBUG is not set

#
# Generic devices
#
CONFIG_SND_MPU401_UART=m
CONFIG_SND_DUMMY=m
CONFIG_SND_VIRMIDI=m
CONFIG_SND_MTPAV=m
CONFIG_SND_SERIAL_U16550=m
CONFIG_SND_MPU401=m

#
# PCI devices
#
CONFIG_SND_AC97_CODEC=m
# CONFIG_SND_ALI5451 is not set
# CONFIG_SND_ATIIXP is not set
# CONFIG_SND_ATIIXP_MODEM is not set
# CONFIG_SND_AU8810 is not set
# CONFIG_SND_AU8820 is not set
# CONFIG_SND_AU8830 is not set
# CONFIG_SND_AZT3328 is not set
CONFIG_SND_BT87X=m
# CONFIG_SND_BT87X_OVERCLOCK is not set
# CONFIG_SND_CS46XX is not set
# CONFIG_SND_CS4281 is not set
CONFIG_SND_EMU10K1=m
# CONFIG_SND_EMU10K1X is not set
# CONFIG_SND_CA0106 is not set
# CONFIG_SND_KORG1212 is not set
# CONFIG_SND_MIXART is not set
# CONFIG_SND_NM256 is not set
# CONFIG_SND_RME32 is not set
# CONFIG_SND_RME96 is not set
# CONFIG_SND_RME9652 is not set
# CONFIG_SND_HDSP is not set
# CONFIG_SND_TRIDENT is not set
# CONFIG_SND_YMFPCI is not set
# CONFIG_SND_ALS4000 is not set
# CONFIG_SND_CMIPCI is not set
# CONFIG_SND_ENS1370 is not set
# CONFIG_SND_ENS1371 is not set
# CONFIG_SND_ES1938 is not set
# CONFIG_SND_ES1968 is not set
# CONFIG_SND_MAESTRO3 is not set
# CONFIG_SND_FM801 is not set
# CONFIG_SND_ICE1712 is not set
# CONFIG_SND_ICE1724 is not set
# CONFIG_SND_INTEL8X0 is not set
# CONFIG_SND_INTEL8X0M is not set
# CONFIG_SND_SONICVIBES is not set
# CONFIG_SND_VIA82XX is not set
# CONFIG_SND_VIA82XX_MODEM is not set
# CONFIG_SND_VX222 is not set
# CONFIG_SND_HDA_INTEL is not set

#
# USB devices
#
# CONFIG_SND_USB_AUDIO is not set
# CONFIG_SND_USB_USX2Y is not set

#
# Open Sound System
#
# CONFIG_SOUND_PRIME is not set

#
# USB support
#
CONFIG_USB_ARCH_HAS_HCD=y
CONFIG_USB_ARCH_HAS_OHCI=y
CONFIG_USB=m
# CONFIG_USB_DEBUG is not set

#
# Miscellaneous USB options
#
CONFIG_USB_DEVICEFS=y
# CONFIG_USB_BANDWIDTH is not set
# CONFIG_USB_DYNAMIC_MINORS is not set
# CONFIG_USB_OTG is not set

#
# USB Host Controller Drivers
#
CONFIG_USB_EHCI_HCD=m
# CONFIG_USB_EHCI_SPLIT_ISO is not set
CONFIG_USB_EHCI_ROOT_HUB_TT=y
# CONFIG_USB_OHCI_HCD is not set
CONFIG_USB_UHCI_HCD=m
# CONFIG_USB_SL811_HCD is not set

#
# USB Device Class drivers
#
# CONFIG_USB_AUDIO is not set
# CONFIG_USB_BLUETOOTH_TTY is not set
# CONFIG_USB_MIDI is not set
# CONFIG_USB_ACM is not set
# CONFIG_USB_PRINTER is not set

#
# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' may also be needed; see USB_STORAGE Help for more information #
CONFIG_USB_STORAGE=m
# CONFIG_USB_STORAGE_DEBUG is not set
# CONFIG_USB_STORAGE_RW_DETECT is not set
CONFIG_USB_STORAGE_DATAFAB=y
# CONFIG_USB_STORAGE_FREECOM is not set
# CONFIG_USB_STORAGE_ISD200 is not set
CONFIG_USB_STORAGE_DPCM=y
# CONFIG_USB_STORAGE_USBAT is not set
CONFIG_USB_STORAGE_SDDR09=y
CONFIG_USB_STORAGE_SDDR55=y
CONFIG_USB_STORAGE_JUMPSHOT=y

#
# USB Input Devices
#
CONFIG_USB_HID=m
CONFIG_USB_HIDINPUT=y
# CONFIG_HID_FF is not set
# CONFIG_USB_HIDDEV is not set

#
# USB HID Boot Protocol drivers
#
# CONFIG_USB_KBD is not set
# CONFIG_USB_MOUSE is not set
# CONFIG_USB_AIPTEK is not set
# CONFIG_USB_WACOM is not set
# CONFIG_USB_KBTAB is not set
# CONFIG_USB_POWERMATE is not set
# CONFIG_USB_MTOUCH is not set
# CONFIG_USB_EGALAX is not set
# CONFIG_USB_XPAD is not set
# CONFIG_USB_ATI_REMOTE is not set

#
# USB Imaging devices
#
# CONFIG_USB_MDC800 is not set
# CONFIG_USB_MICROTEK is not set

#
# USB Multimedia devices
#
# CONFIG_USB_DABUSB is not set
# CONFIG_USB_VICAM is not set
# CONFIG_USB_DSBR is not set
# CONFIG_USB_IBMCAM is not set
# CONFIG_USB_KONICAWC is not set
# CONFIG_USB_OV511 is not set
# CONFIG_USB_SE401 is not set
# CONFIG_USB_SN9C102 is not set
# CONFIG_USB_STV680 is not set

#
# USB Network Adapters
#
# CONFIG_USB_CATC is not set
# CONFIG_USB_KAWETH is not set
# CONFIG_USB_PEGASUS is not set
# CONFIG_USB_RTL8150 is not set
# CONFIG_USB_USBNET is not set
CONFIG_USB_MON=m

#
# USB port drivers
#

#
# USB Serial Converter support
#
# CONFIG_USB_SERIAL is not set

#
# USB Miscellaneous drivers
#
# CONFIG_USB_EMI62 is not set
# CONFIG_USB_EMI26 is not set
# CONFIG_USB_AUERSWALD is not set
# CONFIG_USB_RIO500 is not set
# CONFIG_USB_LEGOTOWER is not set
# CONFIG_USB_LCD is not set
# CONFIG_USB_LED is not set
# CONFIG_USB_CYTHERM is not set
# CONFIG_USB_PHIDGETKIT is not set
# CONFIG_USB_PHIDGETSERVO is not set
# CONFIG_USB_IDMOUSE is not set
# CONFIG_USB_SISUSBVGA is not set
# CONFIG_USB_TEST is not set

#
# USB ATM/DSL drivers
#

#
# USB Gadget Support
#
# CONFIG_USB_GADGET is not set

#
# MMC/SD Card support
#
# CONFIG_MMC is not set

#
# InfiniBand support
#
# CONFIG_INFINIBAND is not set

#
# File systems
#
CONFIG_EXT2_FS=y
# CONFIG_EXT2_FS_XATTR is not set
# CONFIG_EXT3_FS is not set
# CONFIG_JBD is not set
CONFIG_REISER4_FS=y
# CONFIG_REISER4_CHECK is not set
# CONFIG_REISERFS_FS is not set
# CONFIG_JFS_FS is not set
CONFIG_FS_POSIX_ACL=y

#
# XFS support
#
# CONFIG_XFS_FS is not set
# CONFIG_MINIX_FS is not set
# CONFIG_ROMFS_FS is not set
# CONFIG_QUOTA is not set
CONFIG_DNOTIFY=y
# CONFIG_AUTOFS_FS is not set
CONFIG_AUTOFS4_FS=m

#
# Caches
#
# CONFIG_FSCACHE is not set
CONFIG_FUSE_FS=m

#
# CD-ROM/DVD Filesystems
#
CONFIG_ISO9660_FS=m
CONFIG_JOLIET=y
CONFIG_ZISOFS=y
CONFIG_ZISOFS_FS=m
CONFIG_UDF_FS=m
CONFIG_UDF_NLS=y

#
# DOS/FAT/NT Filesystems
#
CONFIG_FAT_FS=m
CONFIG_MSDOS_FS=m
# CONFIG_VFAT_FS is not set
CONFIG_FAT_DEFAULT_CODEPAGE=437
# CONFIG_NTFS_FS is not set

#
# Pseudo filesystems
#
CONFIG_PROC_FS=y
CONFIG_PROC_KCORE=y
CONFIG_SYSFS=y
# CONFIG_DEVFS_FS is not set
CONFIG_DEVPTS_FS_XATTR=y
# CONFIG_DEVPTS_FS_SECURITY is not set
CONFIG_TMPFS=y
CONFIG_TMPFS_XATTR=y
# CONFIG_TMPFS_SECURITY is not set
# CONFIG_HUGETLBFS is not set
# CONFIG_HUGETLB_PAGE is not set
CONFIG_RAMFS=y

#
# Miscellaneous filesystems
#
# CONFIG_ADFS_FS is not set
# CONFIG_AFFS_FS is not set
# CONFIG_HFS_FS is not set
# CONFIG_HFSPLUS_FS is not set
# CONFIG_BEFS_FS is not set
# CONFIG_BFS_FS is not set
# CONFIG_EFS_FS is not set
# CONFIG_CRAMFS is not set
# CONFIG_VXFS_FS is not set
# CONFIG_HPFS_FS is not set
# CONFIG_QNX4FS_FS is not set
# CONFIG_SYSV_FS is not set
# CONFIG_UFS_FS is not set

#
# Network File Systems
#
CONFIG_NFS_FS=m
CONFIG_NFS_V3=y
# CONFIG_NFS_ACL is not set
CONFIG_NFS_V4=y
# CONFIG_NFS_DIRECTIO is not set
CONFIG_NFSD=m
CONFIG_NFSD_V3=y
# CONFIG_NFSD_ACL is not set
CONFIG_NFSD_V4=y
CONFIG_NFSD_TCP=y
CONFIG_LOCKD=m
CONFIG_LOCKD_V4=y
CONFIG_EXPORTFS=m
CONFIG_SUNRPC=m
CONFIG_SUNRPC_GSS=m
CONFIG_RPCSEC_GSS_KRB5=m
CONFIG_RPCSEC_GSS_SPKM3=m
# CONFIG_SMB_FS is not set
# CONFIG_CIFS is not set
# CONFIG_NCP_FS is not set
# CONFIG_CODA_FS is not set
# CONFIG_AFS_FS is not set

#
# Partition Types
#
CONFIG_PARTITION_ADVANCED=y
# CONFIG_ACORN_PARTITION is not set
# CONFIG_OSF_PARTITION is not set
# CONFIG_AMIGA_PARTITION is not set
# CONFIG_ATARI_PARTITION is not set
# CONFIG_MAC_PARTITION is not set
CONFIG_MSDOS_PARTITION=y
# CONFIG_BSD_DISKLABEL is not set
# CONFIG_MINIX_SUBPARTITION is not set
# CONFIG_SOLARIS_X86_PARTITION is not set
# CONFIG_UNIXWARE_DISKLABEL is not set
# CONFIG_LDM_PARTITION is not set
# CONFIG_SGI_PARTITION is not set
# CONFIG_ULTRIX_PARTITION is not set
# CONFIG_SUN_PARTITION is not set
# CONFIG_EFI_PARTITION is not set

#
# Native Language Support
#
CONFIG_NLS=y
CONFIG_NLS_DEFAULT="utf8"
CONFIG_NLS_CODEPAGE_437=m
# CONFIG_NLS_CODEPAGE_737 is not set
# CONFIG_NLS_CODEPAGE_775 is not set
CONFIG_NLS_CODEPAGE_850=m
# CONFIG_NLS_CODEPAGE_852 is not set
# CONFIG_NLS_CODEPAGE_855 is not set
# CONFIG_NLS_CODEPAGE_857 is not set
# CONFIG_NLS_CODEPAGE_860 is not set
# CONFIG_NLS_CODEPAGE_861 is not set
# CONFIG_NLS_CODEPAGE_862 is not set
# CONFIG_NLS_CODEPAGE_863 is not set
# CONFIG_NLS_CODEPAGE_864 is not set
# CONFIG_NLS_CODEPAGE_865 is not set
# CONFIG_NLS_CODEPAGE_866 is not set
# CONFIG_NLS_CODEPAGE_869 is not set
# CONFIG_NLS_CODEPAGE_936 is not set
# CONFIG_NLS_CODEPAGE_950 is not set
# CONFIG_NLS_CODEPAGE_932 is not set
# CONFIG_NLS_CODEPAGE_949 is not set
# CONFIG_NLS_CODEPAGE_874 is not set
# CONFIG_NLS_ISO8859_8 is not set
# CONFIG_NLS_CODEPAGE_1250 is not set
# CONFIG_NLS_CODEPAGE_1251 is not set
CONFIG_NLS_ASCII=m
CONFIG_NLS_ISO8859_1=m
# CONFIG_NLS_ISO8859_2 is not set
# CONFIG_NLS_ISO8859_3 is not set
# CONFIG_NLS_ISO8859_4 is not set
# CONFIG_NLS_ISO8859_5 is not set
# CONFIG_NLS_ISO8859_6 is not set
# CONFIG_NLS_ISO8859_7 is not set
# CONFIG_NLS_ISO8859_9 is not set
# CONFIG_NLS_ISO8859_13 is not set
# CONFIG_NLS_ISO8859_14 is not set
CONFIG_NLS_ISO8859_15=m
# CONFIG_NLS_KOI8_R is not set
# CONFIG_NLS_KOI8_U is not set
CONFIG_NLS_UTF8=y

#
# Profiling support
#
# CONFIG_PROFILING is not set

#
# Kernel hacking
#
CONFIG_DEBUG_KERNEL=y
CONFIG_MAGIC_SYSRQ=y
CONFIG_LOG_BUF_SHIFT=14
CONFIG_DETECT_SOFTLOCKUP=y
# CONFIG_PRINTK_TIME is not set
# CONFIG_SCHEDSTATS is not set
# CONFIG_DEBUG_SLAB is not set
CONFIG_DEBUG_PREEMPT=y
# CONFIG_DEBUG_SPINLOCK is not set
# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
# CONFIG_DEBUG_KOBJECT is not set
# CONFIG_DEBUG_HIGHMEM is not set
CONFIG_DEBUG_BUGVERBOSE=y
# CONFIG_DEBUG_INFO is not set
# CONFIG_PAGE_OWNER is not set
# CONFIG_DEBUG_FS is not set
# CONFIG_FRAME_POINTER is not set
CONFIG_EARLY_PRINTK=y
# CONFIG_DEBUG_STACKOVERFLOW is not set
# CONFIG_KPROBES is not set
# CONFIG_DEBUG_STACK_USAGE is not set
# CONFIG_DEBUG_PAGEALLOC is not set
CONFIG_4KSTACKS=y
CONFIG_X86_FIND_SMP_CONFIG=y
CONFIG_X86_MPPARSE=y
# CONFIG_KGDB is not set

#
# Security options
#
# CONFIG_KEYS is not set
# CONFIG_SECURITY is not set

#
# Cryptographic options
#
CONFIG_CRYPTO=y
CONFIG_CRYPTO_HMAC=y
# CONFIG_CRYPTO_NULL is not set
CONFIG_CRYPTO_MD4=m
CONFIG_CRYPTO_MD5=m
CONFIG_CRYPTO_SHA1=m
CONFIG_CRYPTO_SHA256=m
CONFIG_CRYPTO_SHA512=m
CONFIG_CRYPTO_WP512=m
CONFIG_CRYPTO_DES=m
CONFIG_CRYPTO_BLOWFISH=m
CONFIG_CRYPTO_TWOFISH=m
CONFIG_CRYPTO_SERPENT=m
CONFIG_CRYPTO_AES=m
CONFIG_CRYPTO_AES_586=m
CONFIG_CRYPTO_CAST5=m
CONFIG_CRYPTO_CAST6=m
CONFIG_CRYPTO_TEA=m
CONFIG_CRYPTO_ARC4=m
CONFIG_CRYPTO_KHAZAD=m
CONFIG_CRYPTO_ANUBIS=m
CONFIG_CRYPTO_DEFLATE=m
CONFIG_CRYPTO_MICHAEL_MIC=m
CONFIG_CRYPTO_CRC32C=m
# CONFIG_CRYPTO_TEST is not set

#
# Hardware crypto devices
#
# CONFIG_CRYPTO_DEV_PADLOCK is not set

#
# Library routines
#
CONFIG_CRC_CCITT=m
CONFIG_CRC32=y
CONFIG_LIBCRC32C=m
CONFIG_ZLIB_INFLATE=m
CONFIG_ZLIB_DEFLATE=m
CONFIG_GENERIC_HARDIRQS=y
CONFIG_GENERIC_IRQ_PROBE=y
CONFIG_X86_BIOS_REBOOT=y
CONFIG_PC=y

Quoted 9 lines

-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/

Signature · 3 lines
Carrots work on rabbits, they don't work on hungry weasels.

	- Alan Cox on linux-kernel
#15 lore raw

Re: 2.6.11-rc4-mm1 : IDE crazy numbers, hdb renumbered to hdq ?

Quoted 21 lines · Mathieu Segaud

Andrew Morton <[email protected]> disait derni??rement que :

Quoted 19 lines
Quoted 17 lines · Helge Hafting

This kernel came up, but my boot script complained about no /dev/hdb3
when trying to mount /var.
(I have two IDE disks on the same cable, and an IDE cdrom on another.) They are usually hda, hdb, and hdc.

MAKEDEV hdq did not help. Looking at sysfs, it turns out that /dev/hdq1 is at major:3 minor:1025 if I interpret things right. (/dev/hda1 is at 3:1, which is correct.)
These numbers did not work with my mknod, it created 7:1 instead. So I didn't get to test this mysterious device.

But I assume this is a mistake of some sort, I haven't heard about any change in the IDE numbering coming up? 2.6.1-rc3-mm1 works as expected.

It may be interesting to note that my root raid-1 came up fine, consisting of hdq1 and hda1 instead of the usual hdb1 and hda1.

Quoted 6 lines
Quoted 2 lines

I don't know what could be causing that. Please send .config. If you set CONFIG_BASE_FULL=n, try setting it to `y'.

I've got the same problem here on my box, udev creates hds and hdu entries when running 2.6.11-rc4-mm1, whereas it creates correctly hdf et hdh, on other kernels.

Are these misnamed and misnumbered devices mountable? If not, can you mknod device nodes at the proper major:minor location and have them work?

Seems ->disk_name is getting modified between ide_setup() and add_disk() somehow, giving us:

hdb: ...
hdq: hdq1 hdq2...

Signature · 1 line
Mathematics is the supreme nostalgia of our time.
#16 lore raw

Re: 2.6.11-rc4-mm1 (VFS: Cannot open root device "301")

In reply to Andrew Morton
Quoted 6 lines · Andrew Morton

ftp://ftp.kernel.org/pub/linux/kernel/people/akpm/patches/2.6/2.6.11-rc4/2.6.11-rc4-mm1/

- Various fixes and updates all over the place. Things seem to have slowed down a bit.

I am having trouble getting recent -mm kernels to boot on my test box. For 2.6.11-rc3-mm2 and 2.6.11-rc4-mm1 I get the following:

VFS: Cannot open root device "301" or unknown-block(3,1) Please append a correct "root=" boot option

Kernel panic - not syncing: VFS: Unable to mount root fs on unknown-block(3,1)

2.6.11-rc2-mm1 boots fine, and so do plain -rc3 and -rc4.

I copied a working .config from an earlier kernel(-rc3), and ran make oldconfig, answering most of the new questions 'n'.

I did try appending root=0301 (which worked last year after similar symptoms, but that didn't help this time).

The root fs is ext3, which is compiled in.
Any help appreciated.

Steven

Output of grep ^CONFIG .config:

CONFIG_X86=y
CONFIG_MMU=y
CONFIG_UID16=y
CONFIG_GENERIC_ISA_DMA=y
CONFIG_GENERIC_IOMAP=y
CONFIG_EXPERIMENTAL=y
CONFIG_CLEAN_COMPILE=y
CONFIG_BROKEN_ON_SMP=y
CONFIG_LOCALVERSION="-GX110"
CONFIG_SWAP=y
CONFIG_SYSVIPC=y
CONFIG_BSD_PROCESS_ACCT=y
CONFIG_SYSCTL=y
CONFIG_EMBEDDED=y
CONFIG_BASE_SMALL=1
CONFIG_FUTEX=y
CONFIG_EPOLL=y
CONFIG_SHMEM=y
CONFIG_CC_ALIGN_FUNCTIONS=0
CONFIG_CC_ALIGN_LABELS=0
CONFIG_CC_ALIGN_LOOPS=0
CONFIG_CC_ALIGN_JUMPS=0
CONFIG_X86_PC=y
CONFIG_MPENTIUMIII=y
CONFIG_X86_CMPXCHG=y
CONFIG_X86_XADD=y
CONFIG_X86_L1_CACHE_SHIFT=5
CONFIG_RWSEM_XCHGADD_ALGORITHM=y
CONFIG_GENERIC_CALIBRATE_DELAY=y
CONFIG_X86_WP_WORKS_OK=y
CONFIG_X86_INVLPG=y
CONFIG_X86_BSWAP=y
CONFIG_X86_POPAD_OK=y
CONFIG_X86_GOOD_APIC=y
CONFIG_X86_INTEL_USERCOPY=y
CONFIG_X86_USE_PPRO_CHECKSUM=y
CONFIG_HPET_TIMER=y
CONFIG_X86_UP_APIC=y
CONFIG_X86_UP_IOAPIC=y
CONFIG_X86_LOCAL_APIC=y
CONFIG_X86_IO_APIC=y
CONFIG_X86_TSC=y
CONFIG_X86_MCE=y
CONFIG_X86_MCE_P4THERMAL=y
CONFIG_MICROCODE=y
CONFIG_X86_MSR=y
CONFIG_X86_CPUID=y
CONFIG_EDD=y
CONFIG_NOHIGHMEM=y
CONFIG_MTRR=y
CONFIG_PHYSICAL_START=0x100000
CONFIG_PCI=y
CONFIG_PCI_GOANY=y
CONFIG_PCI_BIOS=y
CONFIG_PCI_DIRECT=y
CONFIG_PCI_LEGACY_PROC=y
CONFIG_BINFMT_ELF=y
CONFIG_BINFMT_MISC=y
CONFIG_PREVENT_FIRMWARE_BUILD=y
CONFIG_BLK_DEV_FD=y
CONFIG_BLK_DEV_LOOP=y
CONFIG_BLK_DEV_RAM=y
CONFIG_BLK_DEV_RAM_COUNT=16
CONFIG_BLK_DEV_RAM_SIZE=32000
CONFIG_BLK_DEV_INITRD=y
CONFIG_INITRAMFS_SOURCE=""
CONFIG_IOSCHED_NOOP=y
CONFIG_IOSCHED_AS=y
CONFIG_IDE=y
CONFIG_BLK_DEV_IDE=y
CONFIG_BLK_DEV_IDEDISK=y
CONFIG_IDEDISK_MULTI_MODE=y
CONFIG_BLK_DEV_IDECD=y
CONFIG_IDE_GENERIC=y
CONFIG_BLK_DEV_IDEPCI=y
CONFIG_IDEPCI_SHARE_IRQ=y
CONFIG_BLK_DEV_IDEDMA_PCI=y
CONFIG_IDEDMA_PCI_AUTO=y
CONFIG_BLK_DEV_PIIX=y
CONFIG_BLK_DEV_IDEDMA=y
CONFIG_IDEDMA_AUTO=y
CONFIG_NET=y
CONFIG_PACKET=y
CONFIG_PACKET_MMAP=y
CONFIG_UNIX=y
CONFIG_NET_KEY=y
CONFIG_INET=y
CONFIG_XFRM=y
CONFIG_NETDEVICES=y
CONFIG_NET_ETHERNET=y
CONFIG_MII=y
CONFIG_NET_VENDOR_3COM=y
CONFIG_VORTEX=y
CONFIG_INPUT=y
CONFIG_INPUT_MOUSEDEV=y
CONFIG_INPUT_MOUSEDEV_PSAUX=y
CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
CONFIG_INPUT_KEYBOARD=y
CONFIG_KEYBOARD_ATKBD=y
CONFIG_INPUT_MOUSE=y
CONFIG_MOUSE_PS2=y
CONFIG_SERIO=y
CONFIG_SERIO_I8042=y
CONFIG_SERIO_SERPORT=y
CONFIG_SERIO_LIBPS2=y
CONFIG_SOUND_GAMEPORT=y
CONFIG_VT=y
CONFIG_VT_CONSOLE=y
CONFIG_HW_CONSOLE=y
CONFIG_SERIAL_8250=y
CONFIG_SERIAL_8250_CONSOLE=y
CONFIG_SERIAL_8250_NR_UARTS=4
CONFIG_SERIAL_8250_EXTENDED=y
CONFIG_SERIAL_8250_SHARE_IRQ=y
CONFIG_SERIAL_CORE=y
CONFIG_SERIAL_CORE_CONSOLE=y
CONFIG_UNIX98_PTYS=y
CONFIG_FTAPE=y
CONFIG_ZFTAPE=y
CONFIG_ZFT_DFLT_BLK_SZ=10240
CONFIG_ZFT_COMPRESSOR=y
CONFIG_FT_NR_BUFFERS=3
CONFIG_FT_PROC_FS=y
CONFIG_FT_NORMAL_DEBUG=y
CONFIG_FT_STD_FDC=y
CONFIG_FT_FDC_THR=8
CONFIG_FT_FDC_MAX_RATE=2000
CONFIG_FT_ALPHA_CLOCK=0
CONFIG_AGP=y
CONFIG_AGP_INTEL=y
CONFIG_VIDEO_DEV=y
CONFIG_VIDEO_SELECT=y
CONFIG_VGA_CONSOLE=y
CONFIG_DUMMY_CONSOLE=y
CONFIG_USB_ARCH_HAS_HCD=y
CONFIG_USB_ARCH_HAS_OHCI=y
CONFIG_EXT2_FS=y
CONFIG_EXT2_FS_XATTR=y
CONFIG_EXT3_FS=y
CONFIG_JBD=y
CONFIG_FS_MBCACHE=y
CONFIG_REISER4_FS=y
CONFIG_REISERFS_FS=y
CONFIG_ISO9660_FS=y
CONFIG_FAT_FS=y
CONFIG_VFAT_FS=y
CONFIG_FAT_DEFAULT_CODEPAGE=437
CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
CONFIG_NTFS_FS=y
CONFIG_NTFS_RW=y
CONFIG_PROC_FS=y
CONFIG_PROC_KCORE=y
CONFIG_SYSFS=y
CONFIG_DEVFS_FS=y
CONFIG_TMPFS=y
CONFIG_RAMFS=y
CONFIG_PARTITION_ADVANCED=y
CONFIG_MSDOS_PARTITION=y
CONFIG_NLS=y
CONFIG_NLS_DEFAULT="iso8859-1"
CONFIG_NLS_CODEPAGE_437=y
CONFIG_NLS_CODEPAGE_850=y
CONFIG_NLS_ASCII=y
CONFIG_NLS_ISO8859_1=y
CONFIG_NLS_UTF8=y
CONFIG_DEBUG_KERNEL=y
CONFIG_MAGIC_SYSRQ=y
CONFIG_LOG_BUF_SHIFT=14
CONFIG_FRAME_POINTER=y
CONFIG_X86_FIND_SMP_CONFIG=y
CONFIG_X86_MPPARSE=y
CONFIG_SECURITY=y
CONFIG_SECURITY_NETWORK=y
CONFIG_SECURITY_CAPABILITIES=y
CONFIG_CRC_CCITT=y
CONFIG_CRC32=y
CONFIG_LIBCRC32C=y
CONFIG_GENERIC_HARDIRQS=y
CONFIG_GENERIC_IRQ_PROBE=y
CONFIG_X86_BIOS_REBOOT=y

#17 lore raw

Re: 2.6.11-rc4-mm1 (VFS: Cannot open root device "301")

Quoted 21 lines · Steven Cole
Quoted 6 lines · Andrew Morton

ftp://ftp.kernel.org/pub/linux/kernel/people/akpm/patches/2.6/2.6.11-rc4/2.6.11-rc4-mm1/

- Various fixes and updates all over the place. Things seem to have slowed down a bit.

I am having trouble getting recent -mm kernels to boot on my test box. For 2.6.11-rc3-mm2 and 2.6.11-rc4-mm1 I get the following:

VFS: Cannot open root device "301" or unknown-block(3,1) Please append a correct "root=" boot option

 Kernel panic - not syncing: VFS: Unable to mount root fs on unknown-block(3,1)

2.6.11-rc2-mm1 boots fine, and so do plain -rc3 and -rc4.

I copied a working .config from an earlier kernel(-rc3), and ran make oldconfig, answering most of the new questions 'n'.

Quoted 6 lines

I did try appending root=0301 (which worked last year after similar symptoms, but that didn't help this time).

The root fs is ext3, which is compiled in.
...
CONFIG_BASE_SMALL=1

Please set CONFIG_BASE_FULL=y. Check that this causes CONFIG_BASE_SMALL=0, then retest.

#18 lore raw

Re: 2.6.11-rc4-mm1 (VFS: Cannot open root device "301")

Quoted 9 lines · Andrew Morton
Quoted 7 lines · Steven Cole

I am having trouble getting recent -mm kernels to boot on my test box. For 2.6.11-rc3-mm2 and 2.6.11-rc4-mm1 I get the following:

VFS: Cannot open root device "301" or unknown-block(3,1) Please append a correct "root=" boot option

Kernel panic - not syncing: VFS: Unable to mount root fs on unknown-block(3,1)

[snipped]

Quoted 3 lines

Please set CONFIG_BASE_FULL=y. Check that this causes CONFIG_BASE_SMALL=0, then retest.

Yes, that worked. 2.6.11-rc4-mm1 now boots OK, but hdb1 seems to be missing.

[root@spc1 steven]# uname -r
2.6.11-rc4-mm1-GX110
[root@spc1 steven]# mount -t reiser4 /dev/hdb1 /reiser4_testing
mount: special device /dev/hdb1 does not exist

Reading another post (and looking in /dev), I tried hdq:

[root@spc1 steven]# mount -t reiser4 /dev/hdq1 /reiser4_testing [root@spc1 steven]# df -T

Filesystem    Type    Size  Used Avail Use% Mounted on
/dev/hda1     ext3    304M   75M  214M  26% /
/dev/hda9 reiserfs    8.3G  3.9G  4.4G  48% /home
/dev/hda8     ext3    464M  8.1M  432M   2% /tmp
/dev/hda6     ext3    7.4G  1.7G  5.4G  24% /usr
/dev/hda7     ext3    1.9G   86M  1.7G   5% /var

/dev/hdq1 reiser4 18G 217M 18G 2% /reiser4_testing

Snipped from dmesg:

hda: ST320423A, ATA DISK drive
hdb: WDC WD200BB-75AUA1, ATA DISK drive
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
Probing IDE interface ide1...
hdc: SONY CD-RW CRX160E, ATAPI CD/DVD-ROM drive
ide1 at 0x170-0x177,0x376 on irq 15
Probing IDE interface ide2...
Probing IDE interface ide3...
Probing IDE interface ide4...
Probing IDE interface ide5...
hda: max request size: 128KiB
hda: 40011300 sectors (20485 MB) w/512KiB Cache, CHS=39693/16/63, UDMA(66)
hda: cache flushes not supported
/dev/ide/host0/bus0/target0/lun0: p1 p2 < p5 p6 p7 p8 p9 >
hdb: max request size: 128KiB
hdb: 39102336 sectors (20020 MB) w/2048KiB Cache, CHS=38792/16/63, UDMA(66)
hdb: cache flushes not supported
/dev/ide/host0/bus0/target1/lun0: p1

Steven

#19 lore raw

Re: 2.6.11-rc4-mm1 (VFS: Cannot open root device "301")

Quoted 60 lines · Steven Cole
Quoted 10 lines · Andrew Morton
Quoted 7 lines · Steven Cole

I am having trouble getting recent -mm kernels to boot on my test box. For 2.6.11-rc3-mm2 and 2.6.11-rc4-mm1 I get the following:

VFS: Cannot open root device "301" or unknown-block(3,1) Please append a correct "root=" boot option

Kernel panic - not syncing: VFS: Unable to mount root fs on unknown-block(3,1)

[snipped]

Quoted 3 lines

Please set CONFIG_BASE_FULL=y. Check that this causes CONFIG_BASE_SMALL=0, then retest.

Yes, that worked. 2.6.11-rc4-mm1 now boots OK, but hdb1 seems to be missing.

[root@spc1 steven]# uname -r
2.6.11-rc4-mm1-GX110
[root@spc1 steven]# mount -t reiser4 /dev/hdb1 /reiser4_testing
mount: special device /dev/hdb1 does not exist

Reading another post (and looking in /dev), I tried hdq:

[root@spc1 steven]# mount -t reiser4 /dev/hdq1 /reiser4_testing [root@spc1 steven]# df -T

Filesystem    Type    Size  Used Avail Use% Mounted on
/dev/hda1     ext3    304M   75M  214M  26% /
/dev/hda9 reiserfs    8.3G  3.9G  4.4G  48% /home
/dev/hda8     ext3    464M  8.1M  432M   2% /tmp
/dev/hda6     ext3    7.4G  1.7G  5.4G  24% /usr
/dev/hda7     ext3    1.9G   86M  1.7G   5% /var

/dev/hdq1 reiser4 18G 217M 18G 2% /reiser4_testing

Snipped from dmesg:

hda: ST320423A, ATA DISK drive
hdb: WDC WD200BB-75AUA1, ATA DISK drive
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
Probing IDE interface ide1...
hdc: SONY CD-RW CRX160E, ATAPI CD/DVD-ROM drive
ide1 at 0x170-0x177,0x376 on irq 15
Probing IDE interface ide2...
Probing IDE interface ide3...
Probing IDE interface ide4...
Probing IDE interface ide5...
hda: max request size: 128KiB
hda: 40011300 sectors (20485 MB) w/512KiB Cache, CHS=39693/16/63, UDMA(66)
hda: cache flushes not supported
/dev/ide/host0/bus0/target0/lun0: p1 p2 < p5 p6 p7 p8 p9 >
hdb: max request size: 128KiB
hdb: 39102336 sectors (20020 MB) w/2048KiB Cache, CHS=38792/16/63, UDMA(66)
hdb: cache flushes not supported
/dev/ide/host0/bus0/target1/lun0: p1

Quoted 1 line

Steven

(Replying to myself)
I decided to fix 2.6.11-rc3-mm1 with CONFIG_BASE_FULL=y and see if the hdb/hdq confusion existed with that earlier kernel, but when I ran lilo, I got a "Fatal: cache_add: LILO internal error" message.

[root@spc1 steven]# /sbin/lilo -v
LILO version 22.6.1, Copyright (C) 1992-1998 Werner Almesberger Development beyond version 21 Copyright (C) 1999-2004 John Coffman Released 17-Nov-2004, and compiled at 20:03:17 on Jan 15 2005

Reading boot sector from /dev/hda
Fatal: cache_add: LILO internal error

This box is still running 2.6.11-rc4-mm1 from above, and was booted with append="root=0301" accidentally left in lilo.conf from earlier testing.

Steven

#20 lore raw

Re: 2.6.11-rc4-mm1 (VFS: Cannot open root device "301")

Quoted 3 lines · Steven Cole
Quoted 3 lines

Yes, that worked. 2.6.11-rc4-mm1 now boots OK, but hdb1 seems to be missing.

Looking at the IDE update in rc4-mm1:

+void ide_init_disk(struct gendisk *disk, ide_drive_t *drive) +{
+ ide_hwif_t *hwif = drive->hwif;
+ unsigned int unit = drive->select.all & (1 << 4);
+
+ disk->major = hwif->major;
+ disk->first_minor = unit << PARTN_BITS;
+ sprintf(disk->disk_name, "hd%c", 'a' + hwif->index * MAX_DRIVES + unit);
+ disk->queue = drive->queue;
+}

Looks funny.

Could someone try this?

- unsigned int unit = drive->select.all & (1 << 4);
+ unsigned int unit = (drive->select.all >> 4) & 1;

#21 lore raw

Re: 2.6.11-rc4-mm1 (VFS: Cannot open root device "301")

Quoted 2 lines · Andrew Morton

Could someone try this?

Let's turn that into a real patch.

drivers/ide/ide-probe.c renamed from drivers/ide/ide-probe.c~ide_init_disk-fix +1 -1
@@ -1269,7 +1269,7 @@ EXPORT_SYMBOL_GPL(ide_unregister_region)
 void ide_init_disk(struct gendisk *disk, ide_drive_t *drive)
 {
 	ide_hwif_t *hwif = drive->hwif;
-	unsigned int unit = drive->select.all & (1 << 4);
+	unsigned int unit = (drive->select.all >> 4) & 1;
 
 	disk->major = hwif->major;
 	disk->first_minor = unit << PARTN_BITS;

_

#22 lore raw

Re: 2.6.11-rc4-mm1 (VFS: Cannot open root device "301")

Quoted 9 lines · Andrew Morton
Quoted 2 lines · Andrew Morton

Could someone try this?

Let's turn that into a real patch.

drivers/ide/ide-probe.c Wed Feb 23 16:24:55 2005 EXPORT_SYMBOL_GPL(ide_unregister_region) · line 1275

Quoted 8 lines
drivers/ide/ide-probe.c Wed Feb 23 16:24:55 2005 renamed from drivers/ide/ide-probe.c~ide_init_disk-fix Wed Feb 23 16:24:44 2005 +1 -1
@@ -1269,7 +1269,7 @@ EXPORT_SYMBOL_GPL(ide_unregister_region)
 void ide_init_disk(struct gendisk *disk, ide_drive_t *drive)
 {
        ide_hwif_t *hwif = drive->hwif;
-       unsigned int unit = drive->select.all & (1 << 4);
+       unsigned int unit = (drive->select.all >> 4) & 1;
 
        disk->major = hwif->major;
        disk->first_minor = unit << PARTN_BITS;

thanks Andrew

fscking bitfields hopefully viro will kill them soon

#23 lore raw

Re: 2.6.11-rc4-mm1 (VFS: Cannot open root device "301")

In reply to Andrew Morton
Quoted 19 lines · Andrew Morton
Quoted 2 lines · Andrew Morton

Could someone try this?

Let's turn that into a real patch.

drivers/ide/ide-probe.c Wed Feb 23 16:24:55 2005 renamed from drivers/ide/ide-probe.c~ide_init_disk-fix Wed Feb 23 16:24:44 2005 +1 -1
@@ -1269,7 +1269,7 @@ EXPORT_SYMBOL_GPL(ide_unregister_region)
 void ide_init_disk(struct gendisk *disk, ide_drive_t *drive)
 {
        ide_hwif_t *hwif = drive->hwif;
-       unsigned int unit = drive->select.all & (1 << 4);
+       unsigned int unit = (drive->select.all >> 4) & 1;
 
        disk->major = hwif->major;
        disk->first_minor = unit << PARTN_BITS;

_

Quoted 1 line

-

Works for me.
Thanks.

#24 lore raw

Re: 2.6.11-rc4-mm1 (VFS: Cannot open root device "301")

In reply to Andrew Morton
Quoted 22 lines · Andrew Morton
Quoted 3 lines · Steven Cole
Quoted 3 lines

Yes, that worked. 2.6.11-rc4-mm1 now boots OK, but hdb1 seems to be missing.

Looking at the IDE update in rc4-mm1:

(quoted diff) +10 -0
+void ide_init_disk(struct gendisk *disk, ide_drive_t *drive)
+{
+	ide_hwif_t *hwif = drive->hwif;
+	unsigned int unit = drive->select.all & (1 << 4);
+
+	disk->major = hwif->major;
+	disk->first_minor = unit << PARTN_BITS;
+	sprintf(disk->disk_name, "hd%c", 'a' + hwif->index * MAX_DRIVES + unit);
+	disk->queue = drive->queue;
+}

Looks funny.

Could someone try this?

Review

Quoted 2 lines
(quoted diff) +1 -1
-	unsigned int unit = drive->select.all & (1 << 4);
+	unsigned int unit = (drive->select.all >> 4) & 1;

Apparently there's already an 'hdb' sitting in drive->name, perhaps we ought to do disk->disk_name = drive->name for the non-devfs case.

Signature · 1 line
Mathematics is the supreme nostalgia of our time.
#25 lore raw

Re: 2.6.11-rc4-mm1 (VFS: Cannot open root device "301")

Quoted 6 lines · Matt Mackall
Quoted 5 lines · Andrew Morton
Quoted 3 lines · Steven Cole
Quoted 3 lines

Yes, that worked. 2.6.11-rc4-mm1 now boots OK, but hdb1 seems to be missing.

Quoted 7 lines

Review

Quoted 7 lines

Looking at the IDE update in rc4-mm1:

(quoted diff) +5 -0
+void ide_init_disk(struct gendisk *disk, ide_drive_t *drive)
+{
+     ide_hwif_t *hwif = drive->hwif;
+     unsigned int unit = drive->select.all & (1 << 4);
+

If i grep in the tree, for select.all, it looks like from the initialization that you can not recover the unit from select.all (ide.c line 235 and 1882) since the function used is not invertible.

Quoted 9 lines

Review

Quoted 5 lines

Could someone try this?

(quoted diff) +1 -1
-     unsigned int unit = drive->select.all & (1 << 4);
+     unsigned int unit = (drive->select.all >> 4) & 1;

Apparently there's already an 'hdb' sitting in drive->name, perhaps we ought to do disk->disk_name = drive->name for the non-devfs case.

init_hwif_default initialized it right.

Could something like this work ?

regards,

Benoit

drivers/ide/ide-probe.c +2 -2
@@ -1269,11 +1269,11 @@ EXPORT_SYMBOL_GPL(ide_unregister_region)
 void ide_init_disk(struct gendisk *disk, ide_drive_t *drive)
 {
 	ide_hwif_t *hwif = drive->hwif;
-	unsigned int unit = drive->select.all & (1 << 4);
+	unsigned int unit = drive->name[2] - 'a' - hwif->index * MAX_DRIVES;
 
 	disk->major = hwif->major;
 	disk->first_minor = unit << PARTN_BITS;
-	sprintf(disk->disk_name, "hd%c", 'a' + hwif->index * MAX_DRIVES + unit);
+	disk->disk_name = drive->name;
 	disk->queue = drive->queue;
 }
 
#26 lore raw

Re: 2.6.11-rc4-mm1 (VFS: Cannot open root device "301")

Quoted 9 lines · Benoit Boissinot
Quoted 8 lines · Matt Mackall
Quoted 7 lines · Andrew Morton
Quoted 3 lines · Steven Cole
Quoted 3 lines

Yes, that worked. 2.6.11-rc4-mm1 now boots OK, but hdb1 seems to be missing.

Looking at the IDE update in rc4-mm1:

Quoted 9 lines
Quoted 5 lines

Review

Quoted 5 lines
(quoted diff) +5 -0
+void ide_init_disk(struct gendisk *disk, ide_drive_t *drive)
+{
+     ide_hwif_t *hwif = drive->hwif;
+     unsigned int unit = drive->select.all & (1 << 4);
+

If i grep in the tree, for select.all, it looks like from the initialization that you can not recover the unit from select.all (ide.c line 235 and 1882) since the function used is not invertible.

They're fine, if a bit ugly. Unit is either 0 or 1. So:

(unit<<4) | 0xa0

is equivalent to unit * 16 as the mask won't mask off any bits.

Quoted 6 lines
Quoted 6 lines
Quoted 5 lines

Could someone try this?

(quoted diff) +1 -1
-     unsigned int unit = drive->select.all & (1 << 4);
+     unsigned int unit = (drive->select.all >> 4) & 1;
Quoted 6 lines
Quoted 3 lines

Apparently there's already an 'hdb' sitting in drive->name, perhaps we ought to do disk->disk_name = drive->name for the non-devfs case.

init_hwif_default initialized it right.

Could something like this work ?

No, because they're arrays and not pointers. I've booted with the obvious strcpy, works fine.

Signature · 1 line
Mathematics is the supreme nostalgia of our time.
#27 lore raw

Re: 2.6.11-rc4-mm1 (VFS: Cannot open root device "301")

In reply to Steven Cole
Quoted 11 lines · Steven Cole
Quoted 9 lines · Andrew Morton
Quoted 7 lines · Steven Cole

I am having trouble getting recent -mm kernels to boot on my test box. For 2.6.11-rc3-mm2 and 2.6.11-rc4-mm1 I get the following:

VFS: Cannot open root device "301" or unknown-block(3,1) Please append a correct "root=" boot option

Kernel panic - not syncing: VFS: Unable to mount root fs on unknown-block(3,1)
Quoted 6 lines

[snipped]

Quoted 3 lines

Please set CONFIG_BASE_FULL=y. Check that this causes CONFIG_BASE_SMALL=0, then retest.

Yes, that worked.

hmm, OK. Matt, we have a block major enumeration problem. It appears that base-small-shrink-chrdevs-hash.patch has the same problem which base-small-shrink-major_names-hash.patch had.

Quoted 6 lines

2.6.11-rc4-mm1 now boots OK, but hdb1 seems to be missing.

[root@spc1 steven]# uname -r
2.6.11-rc4-mm1-GX110
[root@spc1 steven]# mount -t reiser4 /dev/hdb1 /reiser4_testing
mount: special device /dev/hdb1 does not exist

It would seem that your /dev/hdb1 block-special device node isn't present. Try `mknod /dev/hdb1 3 65'.

Quoted 4 lines

hdb: max request size: 128KiB
hdb: 39102336 sectors (20020 MB) w/2048KiB Cache, CHS=38792/16/63, UDMA(66)
hdb: cache flushes not supported
/dev/ide/host0/bus0/target1/lun0: p1

We found a partition.

#28 lore raw

Re: 2.6.11-rc4-mm1 (VFS: Cannot open root device "301")

Quoted 14 lines · Andrew Morton
Quoted 13 lines · Steven Cole
Quoted 9 lines · Andrew Morton
Quoted 7 lines · Steven Cole

I am having trouble getting recent -mm kernels to boot on my test box. For 2.6.11-rc3-mm2 and 2.6.11-rc4-mm1 I get the following:

VFS: Cannot open root device "301" or unknown-block(3,1) Please append a correct "root=" boot option

Kernel panic - not syncing: VFS: Unable to mount root fs on unknown-block(3,1)

[snipped]

Quoted 1 line
Quoted 8 lines
Quoted 4 lines
Quoted 2 lines

Please set CONFIG_BASE_FULL=y. Check that this causes CONFIG_BASE_SMALL=0, then retest.

Yes, that worked.

hmm, OK. Matt, we have a block major enumeration problem. It appears that base-small-shrink-chrdevs-hash.patch has the same problem which base-small-shrink-major_names-hash.patch had.

Hard to see how that could happen.

Quoted 9 lines
Quoted 6 lines

2.6.11-rc4-mm1 now boots OK, but hdb1 seems to be missing.

[root@spc1 steven]# uname -r
2.6.11-rc4-mm1-GX110
[root@spc1 steven]# mount -t reiser4 /dev/hdb1 /reiser4_testing
mount: special device /dev/hdb1 does not exist

It would seem that your /dev/hdb1 block-special device node isn't present. Try `mknod /dev/hdb1 3 65'.

He's got devfs. Something change there recently?

Signature · 1 line
Mathematics is the supreme nostalgia of our time.
#29 lore raw

Re: 2.6.11-rc4-mm1 (VFS: Cannot open root device "301")

In reply to Steven Cole
Quoted 11 lines · Steven Cole
Quoted 10 lines · Andrew Morton
Quoted 8 lines · Steven Cole

I am having trouble getting recent -mm kernels to boot on my test box. For 2.6.11-rc3-mm2 and 2.6.11-rc4-mm1 I get the following:

VFS: Cannot open root device "301" or unknown-block(3,1) Please append a correct "root=" boot option

Kernel panic - not syncing: VFS: Unable to mount root fs on 

unknown-block(3,1)

Quoted 7 lines

[snipped]

Quoted 3 lines

Please set CONFIG_BASE_FULL=y. Check that this causes CONFIG_BASE_SMALL=0, then retest.

Yes, that worked. 2.6.11-rc4-mm1 now boots OK, but hdb1 seems to be missing.

Can you retry CONFIG_BASE_FULL=n with Andrew's patch?

You may need to boot back into a sane kernel for LILO to operate properly.

drivers/ide/ide-probe.c renamed from drivers/ide/ide-probe.c~ide_init_disk-fix +1 -1
@@ -1269,7 +1269,7 @@ EXPORT_SYMBOL_GPL(ide_unregister_region)
 void ide_init_disk(struct gendisk *disk, ide_drive_t *drive)
 {
 	ide_hwif_t *hwif = drive->hwif;
-	unsigned int unit = drive->select.all & (1 << 4);
+	unsigned int unit = (drive->select.all >> 4) & 1;
 
 	disk->major = hwif->major;
 	disk->first_minor = unit << PARTN_BITS;
Signature · 1 line
Mathematics is the supreme nostalgia of our time.
#30 lore raw

Re: 2.6.11-rc4-mm1 (VFS: Cannot open root device "301")

Quoted 30 lines · Matt Mackall
Quoted 12 lines · Steven Cole
Quoted 9 lines · Andrew Morton
Quoted 7 lines · Steven Cole

I am having trouble getting recent -mm kernels to boot on my test box. For 2.6.11-rc3-mm2 and 2.6.11-rc4-mm1 I get the following:

VFS: Cannot open root device "301" or unknown-block(3,1) Please append a correct "root=" boot option

Kernel panic - not syncing: VFS: Unable to mount root fs on unknown-block(3,1)
Quoted 6 lines

[snipped]

Quoted 2 lines

Please set CONFIG_BASE_FULL=y. Check that this causes CONFIG_BASE_SMALL=0, then retest.

Yes, that worked. 2.6.11-rc4-mm1 now boots OK, but hdb1 seems to be missing.

Can you retry CONFIG_BASE_FULL=n with Andrew's patch?

You may need to boot back into a sane kernel for LILO to operate properly.

drivers/ide/ide-probe.c EXPORT_SYMBOL_GPL(ide_unregister_region) · line 1275

Quoted 8 lines
drivers/ide/ide-probe.c renamed from drivers/ide/ide-probe.c~ide_init_disk-fix +1 -1
@@ -1269,7 +1269,7 @@ EXPORT_SYMBOL_GPL(ide_unregister_region)
 void ide_init_disk(struct gendisk *disk, ide_drive_t *drive)
 {
 	ide_hwif_t *hwif = drive->hwif;
-	unsigned int unit = drive->select.all & (1 << 4);
+	unsigned int unit = (drive->select.all >> 4) & 1;
 
 	disk->major = hwif->major;
 	disk->first_minor = unit << PARTN_BITS;

Andrew's above patch fixes the hdb->hdq insanity, but I still need CONFIG_BASE_FULL=y. I tried unsetting CONFIG_BASE_FULL, and again got the "VFS: Cannot open root device" message (with akpm's patch).

Steven

#31 lore raw

Re: 2.6.11-rc4-mm1 (VFS: Cannot open root device "301")

In reply to Matt Mackall
Quoted 30 lines · Matt Mackall
Quoted 12 lines · Steven Cole
Quoted 9 lines · Andrew Morton
Quoted 7 lines · Steven Cole

I am having trouble getting recent -mm kernels to boot on my test box. For 2.6.11-rc3-mm2 and 2.6.11-rc4-mm1 I get the following:

VFS: Cannot open root device "301" or unknown-block(3,1) Please append a correct "root=" boot option

Kernel panic - not syncing: VFS: Unable to mount root fs on unknown-block(3,1)
Quoted 6 lines

[snipped]

Quoted 2 lines

Please set CONFIG_BASE_FULL=y. Check that this causes CONFIG_BASE_SMALL=0, then retest.

Yes, that worked. 2.6.11-rc4-mm1 now boots OK, but hdb1 seems to be missing.

Can you retry CONFIG_BASE_FULL=n with Andrew's patch?

You may need to boot back into a sane kernel for LILO to operate properly.

drivers/ide/ide-probe.c EXPORT_SYMBOL_GPL(ide_unregister_region) · line 1275

Quoted 8 lines
drivers/ide/ide-probe.c renamed from drivers/ide/ide-probe.c~ide_init_disk-fix +1 -1
@@ -1269,7 +1269,7 @@ EXPORT_SYMBOL_GPL(ide_unregister_region)
 void ide_init_disk(struct gendisk *disk, ide_drive_t *drive)
 {
 	ide_hwif_t *hwif = drive->hwif;
-	unsigned int unit = drive->select.all & (1 << 4);
+	unsigned int unit = (drive->select.all >> 4) & 1;
 
 	disk->major = hwif->major;
 	disk->first_minor = unit << PARTN_BITS;

Andrew's above patch fixes the hdb->hdq insanity, but I still need CONFIG_BASE_FULL=y. I tried unsetting CONFIG_BASE_FULL, and again got the "VFS: Cannot open root device" message (with akpm's patch).

Steven

#32 lore raw

Re: 2.6.11-rc4-mm1 (VFS: Cannot open root device "301")

In reply to Steven Cole
Quoted 2 lines · Steven Cole

I copied a working .config from an earlier kernel(-rc3), and ran make oldconfig, answering most of the new questions 'n'.

Then you get into trouble with stuff under CONFIG_EMBEDDED. Answering 'n' turns off stock functionality. Though you really ought not have CONFIG_EMBEDDED turned on anyway. I'm not sure how CONFIG_BASE_SMALL is causing problems as the blockdev bit got dropped already. I'll poke around..

Andrew, looks like turning on EMBEDDED causes a bunch of options to spill onto the general setup menu in menuconfig because of the placement of the bool piece:

Fix up bustedness in menuconfig

init/Kconfig +5 -5
Index: mm1/init/Kconfig
===================================================================
@@ -274,11 +274,6 @@ config BASE_FULL
 	  Disabling this option reduces the size of miscellaneous core
 	  kernel data structures.
 
-config BASE_SMALL
-	int
-	default 0 if BASE_FULL
-	default 1 if !BASE_FULL
-
 config FUTEX
 	bool "Enable futex support" if EMBEDDED
 	default y
@@ -360,6 +355,11 @@ config TINY_SHMEM
 	default !SHMEM
 	bool
 
+config BASE_SMALL
+	int
+	default 0 if BASE_FULL
+	default 1 if !BASE_FULL
+
 menu "Loadable module support"
 
 config MODULES
Signature · 1 line
Mathematics is the supreme nostalgia of our time.
#33 lore raw
In reply to Andrew Morton

I'm getting several modules with undefined symbols :

Kernel: arch/i386/boot/bzImage is ready
Building modules, stage 2.
MODPOST
*** Warning: "match_octal" [fs/udf/udf.ko] undefined! *** Warning: "match_token" [fs/udf/udf.ko] undefined! *** Warning: "match_int" [fs/udf/udf.ko] undefined!
*** Warning: "match_strdup" [fs/isofs/isofs.ko] undefined! *** Warning: "match_token" [fs/isofs/isofs.ko] undefined! *** Warning: "match_int" [fs/isofs/isofs.ko] undefined! *** Warning: "match_octal" [fs/fuse/fuse.ko] undefined! *** Warning: "match_token" [fs/fuse/fuse.ko] undefined! *** Warning: "match_int" [fs/fuse/fuse.ko] undefined! *** Warning: "match_octal" [fs/fat/fat.ko] undefined! *** Warning: "match_strdup" [fs/fat/fat.ko] undefined! *** Warning: "match_token" [fs/fat/fat.ko] undefined! *** Warning: "match_int" [fs/fat/fat.ko] undefined!
*** Warning: "match_token" [fs/ext3/ext3.ko] undefined! *** Warning: "match_int" [fs/ext3/ext3.ko] undefined! *** Warning: "match_token" [fs/ext2/ext2.ko] undefined! *** Warning: "match_int" [fs/ext2/ext2.ko] undefined! *** Warning: "match_octal" [drivers/usb/core/usbcore.ko] undefined! *** Warning: "match_token" [drivers/usb/core/usbcore.ko] undefined! *** Warning: "match_int" [drivers/usb/core/usbcore.ko] undefined!

my .config is attached

Regards,

Vincent

#34 lore raw
In reply to Andrew Morton
Quoted 1 line · Andrew Morton

ftp://ftp.kernel.org/pub/linux/kernel/people/akpm/patches/2.6/2.6.11-rc4/2.6.11-rc4-mm1/

Hi Andrew,

I can't get PCMCIA to work anymore since rc4-mm1.
It was working great with rc4 and rc3-mm1.

PCMCIA loads without any apparent problem (see attached dmesg). But when I plug my orinoco card, nothing happens.
The hermes/orinoco modules are not even loaded as before. cardctl insert/eject hangs.

Attached are dmesg and lsmod from rc4 and rc4-mm1, lspci and .config.

I'd like to help by reverting some patches.
But there seems to have tons of pcmcia modifications since rc3-mm1.
Which one(s) do you think might be responsible for this ?

Regards,
Brice

Quoted 6 lines
(quoted diff) +3 -1
-pcmcia-add-support-ti-pci4510-cardbus-bridge.patch
 
+pcmcia-bridge-resource-management-fix.patch
 
+pcmcia-yenta_socket-ti4150-support.patch
+pcmcia-pd6729-convert-to-pci_register_driver.patch

Review

Quoted 10 lines
(quoted diff) +10 -0
+pcmcia-rsrc_nonstatic-sysfs-output.patch
+pcmcia-rsrc_nonstatic-sysfs-input.patch
+pcmcia-mark-resource-setup-as-done.patch
+pcmcia-pcmcia_device_probe.patch
+pcmcia-pcmcia_device_remove.patch
+pcmcia-pcmcia_device_add.patch
+pcmcia-use-bus_rescan_devices.patch
+pcmcia-add-pcmcia-devices-autonomously.patch
+pcmcia-determine-some-useful-information-about-devices.patch
+pcmcia-per-device-sysfs-output.patch

#
# Automatically generated make config: don't edit
# Linux kernel version: 2.6.11-rc4-mm1
# Wed Feb 23 10:57:08 2005
#
CONFIG_X86=y
CONFIG_MMU=y
CONFIG_UID16=y
CONFIG_GENERIC_ISA_DMA=y
CONFIG_GENERIC_IOMAP=y

#
# Code maturity level options
#
CONFIG_EXPERIMENTAL=y
# CONFIG_CLEAN_COMPILE is not set
CONFIG_BROKEN=y
CONFIG_BROKEN_ON_SMP=y
CONFIG_LOCK_KERNEL=y

#
# General setup
#
CONFIG_LOCALVERSION="=LoulousMobile"
CONFIG_SWAP=y
CONFIG_SYSVIPC=y
# CONFIG_POSIX_MQUEUE is not set
CONFIG_BSD_PROCESS_ACCT=y
# CONFIG_BSD_PROCESS_ACCT_V3 is not set
CONFIG_SYSCTL=y
# CONFIG_AUDIT is not set
CONFIG_HOTPLUG=y
CONFIG_KOBJECT_UEVENT=y
CONFIG_IKCONFIG=y
CONFIG_IKCONFIG_PROC=y
# CONFIG_EMBEDDED is not set
CONFIG_KALLSYMS=y
CONFIG_KALLSYMS_ALL=y
# CONFIG_KALLSYMS_EXTRA_PASS is not set
CONFIG_BASE_FULL=y
CONFIG_BASE_SMALL=0
CONFIG_FUTEX=y
CONFIG_EPOLL=y
CONFIG_SHMEM=y
CONFIG_CC_ALIGN_FUNCTIONS=0
CONFIG_CC_ALIGN_LABELS=0
CONFIG_CC_ALIGN_LOOPS=0
CONFIG_CC_ALIGN_JUMPS=0
# CONFIG_TINY_SHMEM is not set

#
# Loadable module support
#
CONFIG_MODULES=y
CONFIG_MODULE_UNLOAD=y
CONFIG_MODULE_FORCE_UNLOAD=y
CONFIG_OBSOLETE_MODPARM=y
# CONFIG_MODVERSIONS is not set
# CONFIG_MODULE_SRCVERSION_ALL is not set
CONFIG_KMOD=y

#
# Processor type and features
#
CONFIG_X86_PC=y
# CONFIG_X86_ELAN is not set
# CONFIG_X86_VOYAGER is not set
# CONFIG_X86_NUMAQ is not set
# CONFIG_X86_SUMMIT is not set
# CONFIG_X86_BIGSMP is not set
# CONFIG_X86_VISWS is not set
# CONFIG_X86_GENERICARCH is not set
# CONFIG_X86_ES7000 is not set
# CONFIG_M386 is not set
# CONFIG_M486 is not set
# CONFIG_M586 is not set
# CONFIG_M586TSC is not set
# CONFIG_M586MMX is not set
# CONFIG_M686 is not set
# CONFIG_MPENTIUMII is not set
CONFIG_MPENTIUMIII=y
# CONFIG_MPENTIUMM is not set
# CONFIG_MPENTIUM4 is not set
# CONFIG_MK6 is not set
# CONFIG_MK7 is not set
# CONFIG_MK8 is not set
# CONFIG_MCRUSOE is not set
# CONFIG_MEFFICEON is not set
# CONFIG_MWINCHIPC6 is not set
# CONFIG_MWINCHIP2 is not set
# CONFIG_MWINCHIP3D is not set
# CONFIG_MCYRIXIII is not set
# CONFIG_MVIAC3_2 is not set
# CONFIG_X86_GENERIC is not set
CONFIG_X86_CMPXCHG=y
CONFIG_X86_XADD=y
CONFIG_X86_L1_CACHE_SHIFT=5
CONFIG_RWSEM_XCHGADD_ALGORITHM=y
CONFIG_GENERIC_CALIBRATE_DELAY=y
CONFIG_X86_WP_WORKS_OK=y
CONFIG_X86_INVLPG=y
CONFIG_X86_BSWAP=y
CONFIG_X86_POPAD_OK=y
CONFIG_X86_GOOD_APIC=y
CONFIG_X86_INTEL_USERCOPY=y
CONFIG_X86_USE_PPRO_CHECKSUM=y
CONFIG_HPET_TIMER=y
# CONFIG_SMP is not set
CONFIG_PREEMPT=y
CONFIG_PREEMPT_BKL=y
CONFIG_X86_UP_APIC=y
CONFIG_X86_UP_IOAPIC=y
CONFIG_X86_LOCAL_APIC=y
CONFIG_X86_IO_APIC=y
CONFIG_X86_TSC=y
CONFIG_X86_MCE=y
CONFIG_X86_MCE_NONFATAL=y
# CONFIG_X86_MCE_P4THERMAL is not set
# CONFIG_TOSHIBA is not set
# CONFIG_I8K is not set
# CONFIG_MICROCODE is not set
# CONFIG_X86_MSR is not set
# CONFIG_X86_CPUID is not set

#
# Firmware Drivers
#
# CONFIG_EDD is not set
CONFIG_NOHIGHMEM=y
# CONFIG_HIGHMEM4G is not set
# CONFIG_HIGHMEM64G is not set
# CONFIG_MATH_EMULATION is not set
CONFIG_MTRR=y
# CONFIG_EFI is not set
CONFIG_HAVE_DEC_LOCK=y
# CONFIG_REGPARM is not set
CONFIG_SECCOMP=y

#
# Performance-monitoring counters support
#
# CONFIG_PERFCTR is not set
CONFIG_PHYSICAL_START=0x100000
CONFIG_KEXEC=y

#
# Power management options (ACPI, APM)
#
CONFIG_PM=y
CONFIG_PM_DEBUG=y
CONFIG_SOFTWARE_SUSPEND=y
CONFIG_PM_STD_PARTITION="/dev/hda4"

#
# ACPI (Advanced Configuration and Power Interface) Support #
CONFIG_ACPI=y
CONFIG_ACPI_BOOT=y
CONFIG_ACPI_INTERPRETER=y
CONFIG_ACPI_SLEEP=y
CONFIG_ACPI_SLEEP_PROC_FS=y
CONFIG_ACPI_AC=y
CONFIG_ACPI_BATTERY=y
CONFIG_ACPI_BUTTON=y
CONFIG_ACPI_VIDEO=y
CONFIG_ACPI_FAN=y
CONFIG_ACPI_PROCESSOR=y
CONFIG_ACPI_THERMAL=y
# CONFIG_ACPI_ASUS is not set
# CONFIG_ACPI_IBM is not set
# CONFIG_ACPI_TOSHIBA is not set
# CONFIG_ACPI_PCC is not set
# CONFIG_ACPI_SONY is not set
# CONFIG_ACPI_CUSTOM_DSDT is not set CONFIG_ACPI_BLACKLIST_YEAR=0
CONFIG_ACPI_DEBUG=y
CONFIG_ACPI_BUS=y
CONFIG_ACPI_EC=y
CONFIG_ACPI_POWER=y
CONFIG_ACPI_PCI=y
CONFIG_ACPI_SYSTEM=y
CONFIG_X86_PM_TIMER=y
# CONFIG_ACPI_CONTAINER is not set

#
# APM (Advanced Power Management) BIOS Support
#
CONFIG_APM=y
# CONFIG_APM_IGNORE_USER_SUSPEND is not set
# CONFIG_APM_DO_ENABLE is not set
# CONFIG_APM_CPU_IDLE is not set
# CONFIG_APM_DISPLAY_BLANK is not set
# CONFIG_APM_RTC_IS_GMT is not set
# CONFIG_APM_ALLOW_INTS is not set
# CONFIG_APM_REAL_MODE_POWER_OFF is not set

#
# CPU Frequency scaling
#
CONFIG_CPU_FREQ=y
CONFIG_CPU_FREQ_TABLE=y
# CONFIG_CPU_FREQ_DEBUG is not set CONFIG_CPU_FREQ_STAT=y CONFIG_CPU_FREQ_STAT_DETAILS=y CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE=y # CONFIG_CPU_FREQ_DEFAULT_GOV_USERSPACE is not set CONFIG_CPU_FREQ_GOV_PERFORMANCE=y CONFIG_CPU_FREQ_GOV_POWERSAVE=y CONFIG_CPU_FREQ_GOV_USERSPACE=y CONFIG_CPU_FREQ_GOV_ONDEMAND=y

#
# CPUFreq processor drivers
#
# CONFIG_X86_ACPI_CPUFREQ is not set
# CONFIG_X86_POWERNOW_K6 is not set
# CONFIG_X86_POWERNOW_K7 is not set
# CONFIG_X86_POWERNOW_K8 is not set
# CONFIG_X86_GX_SUSPMOD is not set
CONFIG_X86_SPEEDSTEP_CENTRINO=y
# CONFIG_X86_SPEEDSTEP_CENTRINO_ACPI is not set
CONFIG_X86_SPEEDSTEP_CENTRINO_TABLE=y
CONFIG_X86_SPEEDSTEP_ICH=y
# CONFIG_X86_SPEEDSTEP_SMI is not set
# CONFIG_X86_P4_CLOCKMOD is not set
# CONFIG_X86_CPUFREQ_NFORCE2 is not set
# CONFIG_X86_LONGRUN is not set
# CONFIG_X86_LONGHAUL is not set

#

# shared options
#
CONFIG_X86_SPEEDSTEP_LIB=y
# CONFIG_X86_SPEEDSTEP_RELAXED_CAP_CHECK is not set

#
# Bus options (PCI, PCMCIA, EISA, MCA, ISA)
#
CONFIG_PCI=y
# CONFIG_PCI_GOBIOS is not set
# CONFIG_PCI_GOMMCONFIG is not set
# CONFIG_PCI_GODIRECT is not set
CONFIG_PCI_GOANY=y
CONFIG_PCI_BIOS=y
CONFIG_PCI_DIRECT=y
CONFIG_PCI_MMCONFIG=y
# CONFIG_PCIEPORTBUS is not set
# CONFIG_PCI_MSI is not set
CONFIG_PCI_LEGACY_PROC=y
CONFIG_PCI_NAMES=y
CONFIG_ISA=y
# CONFIG_EISA is not set
# CONFIG_MCA is not set
# CONFIG_SCx200 is not set

#
# PCCARD (PCMCIA/CardBus) support
#
CONFIG_PCCARD=m
# CONFIG_PCMCIA_DEBUG is not set
CONFIG_PCMCIA=m
CONFIG_CARDBUS=y

#
# PC-card bridges
#
CONFIG_YENTA=m
# CONFIG_PD6729 is not set
# CONFIG_I82092 is not set
# CONFIG_I82365 is not set
# CONFIG_TCIC is not set
CONFIG_PCMCIA_PROBE=y
CONFIG_PCCARD_NONSTATIC=m

#
# PCI Hotplug Support
#
CONFIG_HOTPLUG_PCI=y
CONFIG_HOTPLUG_PCI_FAKE=y
CONFIG_HOTPLUG_PCI_COMPAQ=y
CONFIG_HOTPLUG_PCI_COMPAQ_NVRAM=y
# CONFIG_HOTPLUG_PCI_IBM is not set
# CONFIG_HOTPLUG_PCI_ACPI is not set
# CONFIG_HOTPLUG_PCI_CPCI is not set
# CONFIG_HOTPLUG_PCI_SHPC is not set

#
# Executable file formats
#
CONFIG_BINFMT_ELF=y
CONFIG_BINFMT_AOUT=y
CONFIG_BINFMT_MISC=y

#
# Device Drivers
#

#
# Generic Driver Options
#
# CONFIG_STANDALONE is not set
# CONFIG_PREVENT_FIRMWARE_BUILD is not set
CONFIG_FW_LOADER=y
# CONFIG_DEBUG_DRIVER is not set

#
# Connector - unified userspace <-> kernelspace linker #
CONFIG_CONNECTOR=m

#
# Memory Technology Devices (MTD)
#
# CONFIG_MTD is not set

#
# Parallel port support
#
CONFIG_PARPORT=m
CONFIG_PARPORT_PC=m
# CONFIG_PARPORT_SERIAL is not set
# CONFIG_PARPORT_PC_FIFO is not set
# CONFIG_PARPORT_PC_SUPERIO is not set
# CONFIG_PARPORT_PC_PCMCIA is not set
# CONFIG_PARPORT_GSC is not set
# CONFIG_PARPORT_1284 is not set

#
# Plug and Play support
#
CONFIG_PNP=y
# CONFIG_PNP_DEBUG is not set

#
# Protocols
#
# CONFIG_ISAPNP is not set
CONFIG_PNPBIOS=y
CONFIG_PNPBIOS_PROC_FS=y
CONFIG_PNPACPI=y

#
# Block devices
#
# CONFIG_BLK_DEV_FD is not set
# CONFIG_BLK_DEV_XD is not set
# CONFIG_PARIDE is not set
# CONFIG_BLK_CPQ_DA is not set
# CONFIG_BLK_CPQ_CISS_DA is not set
# CONFIG_BLK_DEV_DAC960 is not set
# CONFIG_BLK_DEV_UMEM is not set
# CONFIG_BLK_DEV_COW_COMMON is not set
CONFIG_BLK_DEV_LOOP=m
# CONFIG_BLK_DEV_CRYPTOLOOP is not set
# CONFIG_BLK_DEV_NBD is not set
# CONFIG_BLK_DEV_SX8 is not set
# CONFIG_BLK_DEV_UB is not set
# CONFIG_BLK_DEV_RAM is not set
CONFIG_BLK_DEV_RAM_COUNT=16
CONFIG_INITRAMFS_SOURCE=""
# CONFIG_LBD is not set
# CONFIG_CDROM_PKTCDVD is not set

#
# IO Schedulers
#
CONFIG_IOSCHED_NOOP=y
CONFIG_IOSCHED_AS=y
CONFIG_IOSCHED_DEADLINE=y
CONFIG_IOSCHED_CFQ=y
# CONFIG_ATA_OVER_ETH is not set

#
# ATA/ATAPI/MFM/RLL support
#
CONFIG_IDE=y
CONFIG_BLK_DEV_IDE=y

#
# Please see Documentation/ide.txt for help/info on IDE drives #
# CONFIG_BLK_DEV_IDE_SATA is not set
# CONFIG_BLK_DEV_HD_IDE is not set CONFIG_BLK_DEV_IDEDISK=y
CONFIG_IDEDISK_MULTI_MODE=y
# CONFIG_BLK_DEV_IDECS is not set CONFIG_BLK_DEV_IDECD=y
# CONFIG_BLK_DEV_IDETAPE is not set
# CONFIG_BLK_DEV_IDEFLOPPY is not set
# CONFIG_BLK_DEV_IDESCSI is not set
# CONFIG_IDE_TASK_IOCTL is not set

#
# IDE chipset support/bugfixes
#
CONFIG_IDE_GENERIC=y
# CONFIG_BLK_DEV_CMD640 is not set
# CONFIG_BLK_DEV_IDEPNP is not set
CONFIG_BLK_DEV_IDEPCI=y
CONFIG_IDEPCI_SHARE_IRQ=y
# CONFIG_BLK_DEV_OFFBOARD is not set
CONFIG_BLK_DEV_GENERIC=y
# CONFIG_BLK_DEV_OPTI621 is not set
# CONFIG_BLK_DEV_RZ1000 is not set
CONFIG_BLK_DEV_IDEDMA_PCI=y
# CONFIG_BLK_DEV_IDEDMA_FORCED is not set
CONFIG_IDEDMA_PCI_AUTO=y
# CONFIG_IDEDMA_ONLYDISK is not set
# CONFIG_BLK_DEV_AEC62XX is not set
# CONFIG_BLK_DEV_ALI15X3 is not set
# CONFIG_BLK_DEV_AMD74XX is not set
# CONFIG_BLK_DEV_ATIIXP is not set
# CONFIG_BLK_DEV_CMD64X is not set
# CONFIG_BLK_DEV_TRIFLEX is not set
# CONFIG_BLK_DEV_CY82C693 is not set
# CONFIG_BLK_DEV_CS5520 is not set
# CONFIG_BLK_DEV_CS5530 is not set
# CONFIG_BLK_DEV_HPT34X is not set
# CONFIG_BLK_DEV_HPT366 is not set
# CONFIG_BLK_DEV_SC1200 is not set
CONFIG_BLK_DEV_PIIX=y
# CONFIG_BLK_DEV_NS87415 is not set
# CONFIG_BLK_DEV_PDC202XX_OLD is not set
# CONFIG_BLK_DEV_PDC202XX_NEW is not set
# CONFIG_BLK_DEV_SVWKS is not set
# CONFIG_BLK_DEV_SIIMAGE is not set
# CONFIG_BLK_DEV_SIS5513 is not set
# CONFIG_BLK_DEV_SLC90E66 is not set
# CONFIG_BLK_DEV_TRM290 is not set
# CONFIG_BLK_DEV_VIA82CXXX is not set
# CONFIG_IDE_ARM is not set
# CONFIG_IDE_CHIPSETS is not set
CONFIG_BLK_DEV_IDEDMA=y
# CONFIG_IDEDMA_IVB is not set
CONFIG_IDEDMA_AUTO=y
# CONFIG_BLK_DEV_HD is not set

#
# SCSI device support
#
CONFIG_SCSI=y
CONFIG_SCSI_PROC_FS=y

#
# SCSI support type (disk, tape, CD-ROM)
#
CONFIG_BLK_DEV_SD=y
# CONFIG_CHR_DEV_ST is not set
# CONFIG_CHR_DEV_OSST is not set
CONFIG_BLK_DEV_SR=m
# CONFIG_BLK_DEV_SR_VENDOR is not set
CONFIG_CHR_DEV_SG=m
# CONFIG_CHR_DEV_SCH is not set

#
# Some SCSI devices (e.g. CD jukebox) support multiple LUNs #
# CONFIG_SCSI_MULTI_LUN is not set
# CONFIG_SCSI_CONSTANTS is not set
# CONFIG_SCSI_LOGGING is not set

#
# SCSI Transport Attributes
#
# CONFIG_SCSI_SPI_ATTRS is not set
# CONFIG_SCSI_FC_ATTRS is not set
# CONFIG_SCSI_ISCSI_ATTRS is not set

#
# SCSI low-level drivers
#
# CONFIG_BLK_DEV_3W_XXXX_RAID is not set
# CONFIG_SCSI_3W_9XXX is not set
# CONFIG_SCSI_ARCMSR is not set
# CONFIG_SCSI_7000FASST is not set
# CONFIG_SCSI_ACARD is not set
# CONFIG_SCSI_AHA152X is not set
# CONFIG_SCSI_AHA1542 is not set
# CONFIG_SCSI_AACRAID is not set
# CONFIG_SCSI_AIC7XXX is not set
# CONFIG_SCSI_AIC7XXX_OLD is not set
# CONFIG_SCSI_AIC79XX is not set
# CONFIG_SCSI_DPT_I2O is not set
# CONFIG_SCSI_ADVANSYS is not set
# CONFIG_SCSI_IN2000 is not set
# CONFIG_MEGARAID_NEWGEN is not set
# CONFIG_MEGARAID_LEGACY is not set
# CONFIG_SCSI_SATA is not set
# CONFIG_SCSI_BUSLOGIC is not set
# CONFIG_SCSI_CPQFCTS is not set
# CONFIG_SCSI_DMX3191D is not set
# CONFIG_SCSI_DTC3280 is not set
# CONFIG_SCSI_EATA is not set
# CONFIG_SCSI_EATA_PIO is not set
# CONFIG_SCSI_FUTURE_DOMAIN is not set
# CONFIG_SCSI_GDTH is not set
# CONFIG_SCSI_GENERIC_NCR5380 is not set
# CONFIG_SCSI_GENERIC_NCR5380_MMIO is not set
# CONFIG_SCSI_IPS is not set
# CONFIG_SCSI_INITIO is not set
# CONFIG_SCSI_INIA100 is not set
# CONFIG_SCSI_PPA is not set
# CONFIG_SCSI_IMM is not set
# CONFIG_SCSI_NCR53C406A is not set
# CONFIG_SCSI_SYM53C8XX_2 is not set
# CONFIG_SCSI_IPR is not set
# CONFIG_SCSI_PAS16 is not set
# CONFIG_SCSI_PCI2000 is not set
# CONFIG_SCSI_PCI2220I is not set
# CONFIG_SCSI_PSI240I is not set
# CONFIG_SCSI_QLOGIC_FAS is not set
# CONFIG_SCSI_QLOGIC_ISP is not set
# CONFIG_SCSI_QLOGIC_FC is not set
# CONFIG_SCSI_QLOGIC_1280 is not set
CONFIG_SCSI_QLA2XXX=y
# CONFIG_SCSI_QLA21XX is not set
# CONFIG_SCSI_QLA22XX is not set
# CONFIG_SCSI_QLA2300 is not set
# CONFIG_SCSI_QLA2322 is not set
# CONFIG_SCSI_QLA6312 is not set
# CONFIG_SCSI_SEAGATE is not set
# CONFIG_SCSI_SYM53C416 is not set
# CONFIG_SCSI_DC395x is not set
# CONFIG_SCSI_DC390T is not set
# CONFIG_SCSI_T128 is not set
# CONFIG_SCSI_U14_34F is not set
# CONFIG_SCSI_ULTRASTOR is not set
# CONFIG_SCSI_NSP32 is not set
# CONFIG_SCSI_DEBUG is not set

#
# PCMCIA SCSI adapter support
#
# CONFIG_PCMCIA_AHA152X is not set
# CONFIG_PCMCIA_FDOMAIN is not set
# CONFIG_PCMCIA_NINJA_SCSI is not set
# CONFIG_PCMCIA_QLOGIC is not set
# CONFIG_PCMCIA_SYM53C500 is not set

#
# Old CD-ROM drivers (not SCSI, not IDE)
#
# CONFIG_CD_NO_IDESCSI is not set

#
# Multi-device support (RAID and LVM)
#
CONFIG_MD=y
# CONFIG_BLK_DEV_MD is not set
CONFIG_BLK_DEV_DM=m
# CONFIG_DM_CRYPT is not set
# CONFIG_DM_SNAPSHOT is not set
# CONFIG_DM_MIRROR is not set
# CONFIG_DM_ZERO is not set
# CONFIG_DM_MULTIPATH is not set

#
# Fusion MPT device support
#
# CONFIG_FUSION is not set

#
# IEEE 1394 (FireWire) support
#
# CONFIG_IEEE1394 is not set

#
# I2O device support
#
# CONFIG_I2O is not set

#
# Networking support
#
CONFIG_NET=y

#
# Networking options
#
CONFIG_PACKET=y
CONFIG_PACKET_MMAP=y
# CONFIG_NETLINK_DEV is not set
CONFIG_UNIX=y
# CONFIG_NET_KEY is not set
CONFIG_INET=y
CONFIG_IP_MULTICAST=y
CONFIG_IP_ADVANCED_ROUTER=y
# CONFIG_IP_MULTIPLE_TABLES is not set
# CONFIG_IP_ROUTE_MULTIPATH is not set
# CONFIG_IP_ROUTE_VERBOSE is not set
# CONFIG_IP_PNP is not set
# CONFIG_NET_IPIP is not set
# CONFIG_NET_IPGRE is not set
# CONFIG_IP_MROUTE is not set
# CONFIG_ARPD is not set
# CONFIG_SYN_COOKIES is not set
# CONFIG_INET_AH is not set
# CONFIG_INET_ESP is not set
# CONFIG_INET_IPCOMP is not set
# CONFIG_INET_TUNNEL is not set
CONFIG_IP_TCPDIAG=y
# CONFIG_IP_TCPDIAG_IPV6 is not set

#
# IP: Virtual Server Configuration
#
# CONFIG_IP_VS is not set
# CONFIG_IPV6 is not set
CONFIG_NETFILTER=y
# CONFIG_NETFILTER_DEBUG is not set

#
# IP: Netfilter Configuration
#
CONFIG_IP_NF_CONNTRACK=m
# CONFIG_IP_NF_CT_ACCT is not set
# CONFIG_IP_NF_CONNTRACK_MARK is not set
# CONFIG_IP_NF_CT_PROTO_SCTP is not set
# CONFIG_IP_NF_FTP is not set
# CONFIG_IP_NF_IRC is not set
# CONFIG_IP_NF_TFTP is not set
# CONFIG_IP_NF_AMANDA is not set
# CONFIG_IP_NF_QUEUE is not set
CONFIG_IP_NF_IPTABLES=m
# CONFIG_IP_NF_MATCH_LIMIT is not set
# CONFIG_IP_NF_MATCH_IPRANGE is not set
# CONFIG_IP_NF_MATCH_MAC is not set
# CONFIG_IP_NF_MATCH_PKTTYPE is not set
# CONFIG_IP_NF_MATCH_MARK is not set
# CONFIG_IP_NF_MATCH_MULTIPORT is not set
# CONFIG_IP_NF_MATCH_TOS is not set
# CONFIG_IP_NF_MATCH_RECENT is not set
# CONFIG_IP_NF_MATCH_ECN is not set
# CONFIG_IP_NF_MATCH_DSCP is not set
# CONFIG_IP_NF_MATCH_AH_ESP is not set
# CONFIG_IP_NF_MATCH_LENGTH is not set
# CONFIG_IP_NF_MATCH_TTL is not set
# CONFIG_IP_NF_MATCH_TCPMSS is not set
# CONFIG_IP_NF_MATCH_HELPER is not set
CONFIG_IP_NF_MATCH_STATE=m
CONFIG_IP_NF_MATCH_CONNTRACK=m
# CONFIG_IP_NF_MATCH_OWNER is not set
# CONFIG_IP_NF_MATCH_ADDRTYPE is not set
# CONFIG_IP_NF_MATCH_REALM is not set
# CONFIG_IP_NF_MATCH_SCTP is not set
# CONFIG_IP_NF_MATCH_COMMENT is not set
# CONFIG_IP_NF_MATCH_HASHLIMIT is not set
CONFIG_IP_NF_FILTER=m
CONFIG_IP_NF_TARGET_REJECT=m
CONFIG_IP_NF_TARGET_LOG=m
# CONFIG_IP_NF_TARGET_ULOG is not set
# CONFIG_IP_NF_TARGET_TCPMSS is not set
CONFIG_IP_NF_NAT=m
CONFIG_IP_NF_NAT_NEEDED=y
CONFIG_IP_NF_TARGET_MASQUERADE=m
# CONFIG_IP_NF_TARGET_REDIRECT is not set
# CONFIG_IP_NF_TARGET_NETMAP is not set
# CONFIG_IP_NF_TARGET_SAME is not set
# CONFIG_IP_NF_NAT_SNMP_BASIC is not set
# CONFIG_IP_NF_MANGLE is not set
# CONFIG_IP_NF_RAW is not set
# CONFIG_IP_NF_ARPTABLES is not set

#
# SCTP Configuration (EXPERIMENTAL)
#
# CONFIG_IP_SCTP is not set
# CONFIG_ATM is not set
# CONFIG_BRIDGE is not set
# CONFIG_VLAN_8021Q is not set
# CONFIG_DECNET is not set
# CONFIG_LLC2 is not set
# CONFIG_IPX is not set
# CONFIG_ATALK is not set
# CONFIG_X25 is not set
# CONFIG_LAPB is not set
# CONFIG_NET_DIVERT is not set
# CONFIG_ECONET is not set
# CONFIG_WAN_ROUTER is not set

#
# QoS and/or fair queueing
#
# CONFIG_NET_SCHED is not set
# CONFIG_NET_CLS_ROUTE is not set

#
# Network testing
#
# CONFIG_NET_PKTGEN is not set
# CONFIG_KGDBOE is not set
CONFIG_NETPOLL=y
# CONFIG_NETPOLL_RX is not set
# CONFIG_NETPOLL_TRAP is not set
CONFIG_NET_POLL_CONTROLLER=y
# CONFIG_HAMRADIO is not set
CONFIG_IRDA=m

#
# IrDA protocols
#
CONFIG_IRLAN=m
CONFIG_IRNET=m
CONFIG_IRCOMM=m
CONFIG_IRDA_ULTRA=y

#
# IrDA options
#
CONFIG_IRDA_CACHE_LAST_LSAP=y
CONFIG_IRDA_FAST_RR=y
CONFIG_IRDA_DEBUG=y

#
# Infrared-port device drivers
#

#
# SIR device drivers
#
CONFIG_IRTTY_SIR=m

#
# Dongle support
#
# CONFIG_DONGLE is not set

#
# Old SIR device drivers
#
CONFIG_IRPORT_SIR=m

#
# Old Serial dongle support
#
# CONFIG_DONGLE_OLD is not set

#
# FIR device drivers
#
# CONFIG_USB_IRDA is not set
# CONFIG_SIGMATEL_FIR is not set
# CONFIG_NSC_FIR is not set
# CONFIG_WINBOND_FIR is not set
# CONFIG_TOSHIBA_FIR is not set
# CONFIG_SMC_IRCC_FIR is not set
# CONFIG_ALI_FIR is not set
# CONFIG_VLSI_FIR is not set
# CONFIG_VIA_FIR is not set
# CONFIG_BT is not set
# CONFIG_IEEE80211 is not set
CONFIG_NETDEVICES=y
CONFIG_DUMMY=m
# CONFIG_BONDING is not set
# CONFIG_EQUALIZER is not set
CONFIG_TUN=m
# CONFIG_NET_SB1000 is not set

#
# ARCnet devices
#
# CONFIG_ARCNET is not set

#
# Ethernet (10 or 100Mbit)
#
CONFIG_NET_ETHERNET=y
CONFIG_MII=y
# CONFIG_HAPPYMEAL is not set
# CONFIG_SUNGEM is not set
# CONFIG_NET_VENDOR_3COM is not set
# CONFIG_LANCE is not set
# CONFIG_NET_VENDOR_SMC is not set
# CONFIG_NET_VENDOR_RACAL is not set

#
# Tulip family network device support
#
# CONFIG_NET_TULIP is not set
# CONFIG_AT1700 is not set
# CONFIG_DEPCA is not set
# CONFIG_HP100 is not set
# CONFIG_NET_ISA is not set
CONFIG_NET_PCI=y
# CONFIG_PCNET32 is not set
# CONFIG_AMD8111_ETH is not set
# CONFIG_ADAPTEC_STARFIRE is not set
# CONFIG_AC3200 is not set
# CONFIG_APRICOT is not set
# CONFIG_B44 is not set
# CONFIG_FORCEDETH is not set
# CONFIG_CS89x0 is not set
# CONFIG_DGRS is not set
# CONFIG_EEPRO100 is not set
CONFIG_E100=y
# CONFIG_FEALNX is not set
# CONFIG_NATSEMI is not set
# CONFIG_NE2K_PCI is not set
# CONFIG_8139CP is not set
# CONFIG_8139TOO is not set
# CONFIG_SIS900 is not set
# CONFIG_EPIC100 is not set
# CONFIG_SUNDANCE is not set
# CONFIG_TLAN is not set
# CONFIG_VIA_RHINE is not set
# CONFIG_NET_POCKET is not set

#
# Ethernet (1000 Mbit)
#
# CONFIG_ACENIC is not set
# CONFIG_DL2K is not set
# CONFIG_E1000 is not set
# CONFIG_NS83820 is not set
# CONFIG_HAMACHI is not set
# CONFIG_YELLOWFIN is not set
# CONFIG_R8169 is not set
# CONFIG_SKGE is not set
# CONFIG_SK98LIN is not set
# CONFIG_VIA_VELOCITY is not set
# CONFIG_TIGON3 is not set

#
# Ethernet (10000 Mbit)
#
# CONFIG_IXGB is not set
# CONFIG_S2IO is not set

#
# Token Ring devices
#
# CONFIG_TR is not set

#
# Wireless LAN (non-hamradio)
#
CONFIG_NET_RADIO=y

#
# Obsolete Wireless cards support (pre-802.11)
#
# CONFIG_STRIP is not set
# CONFIG_ARLAN is not set
# CONFIG_WAVELAN is not set
# CONFIG_PCMCIA_WAVELAN is not set
# CONFIG_PCMCIA_NETWAVE is not set

#
# Wireless 802.11 Frequency Hopping cards support
#
# CONFIG_PCMCIA_RAYCS is not set

#
# Wireless 802.11b ISA/PCI cards support
#
# CONFIG_AIRO is not set
CONFIG_HERMES=m
# CONFIG_PLX_HERMES is not set
# CONFIG_TMD_HERMES is not set
# CONFIG_PCI_HERMES is not set
# CONFIG_ATMEL is not set

#
# Wireless 802.11b Pcmcia/Cardbus cards support
#
CONFIG_PCMCIA_HERMES=m
# CONFIG_AIRO_CS is not set
# CONFIG_PCMCIA_WL3501 is not set

#
# Prism GT/Duette 802.11(a/b/g) PCI/Cardbus support #
# CONFIG_PRISM54 is not set
# CONFIG_HOSTAP is not set CONFIG_NET_WIRELESS=y

#
# PCMCIA network device support
#
CONFIG_NET_PCMCIA=y
# CONFIG_PCMCIA_3C589 is not set
# CONFIG_PCMCIA_3C574 is not set
# CONFIG_PCMCIA_FMVJ18X is not set
# CONFIG_PCMCIA_PCNET is not set
# CONFIG_PCMCIA_NMCLAN is not set
# CONFIG_PCMCIA_SMC91C92 is not set
# CONFIG_PCMCIA_XIRC2PS is not set
# CONFIG_PCMCIA_AXNET is not set

#
# Wan interfaces
#
# CONFIG_WAN is not set
# CONFIG_FDDI is not set
# CONFIG_HIPPI is not set
CONFIG_PLIP=m
CONFIG_PPP=m
# CONFIG_PPP_MULTILINK is not set
# CONFIG_PPP_FILTER is not set
CONFIG_PPP_ASYNC=m
# CONFIG_PPP_SYNC_TTY is not set
CONFIG_PPP_DEFLATE=m
CONFIG_PPP_BSDCOMP=m
# CONFIG_PPPOE is not set
# CONFIG_SLIP is not set
# CONFIG_NET_FC is not set
# CONFIG_SHAPER is not set
CONFIG_NETCONSOLE=m

#
# ISDN subsystem
#
# CONFIG_ISDN is not set

#
# Telephony Support
#
# CONFIG_PHONE is not set

#
# Input device support
#
CONFIG_INPUT=y

#
# Userland interfaces
#
CONFIG_INPUT_MOUSEDEV=y
CONFIG_INPUT_MOUSEDEV_PSAUX=y
CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
# CONFIG_INPUT_JOYDEV is not set
# CONFIG_INPUT_TSDEV is not set
CONFIG_INPUT_EVDEV=y
# CONFIG_INPUT_EVBUG is not set

#
# Input Device Drivers
#
CONFIG_INPUT_KEYBOARD=y
CONFIG_KEYBOARD_ATKBD=y
# CONFIG_KEYBOARD_SUNKBD is not set
# CONFIG_KEYBOARD_LKKBD is not set
# CONFIG_KEYBOARD_XTKBD is not set
# CONFIG_KEYBOARD_NEWTON is not set
CONFIG_INPUT_MOUSE=y
CONFIG_MOUSE_PS2=y
# CONFIG_MOUSE_SERIAL is not set
# CONFIG_MOUSE_INPORT is not set
# CONFIG_MOUSE_LOGIBM is not set
# CONFIG_MOUSE_PC110PAD is not set
# CONFIG_MOUSE_VSXXXAA is not set
# CONFIG_INPUT_JOYSTICK is not set
# CONFIG_INPUT_TOUCHSCREEN is not set
CONFIG_INPUT_MISC=y
CONFIG_INPUT_PCSPKR=m
# CONFIG_INPUT_UINPUT is not set

#
# Hardware I/O ports
#
CONFIG_SERIO=y
CONFIG_SERIO_I8042=y
# CONFIG_SERIO_SERPORT is not set
# CONFIG_SERIO_CT82C710 is not set
# CONFIG_SERIO_PARKBD is not set
CONFIG_SERIO_PCIPS2=m
CONFIG_SERIO_LIBPS2=y
# CONFIG_SERIO_RAW is not set
# CONFIG_GAMEPORT is not set
CONFIG_SOUND_GAMEPORT=y

#
# Character devices
#
CONFIG_VT=y
CONFIG_VT_CONSOLE=y
CONFIG_HW_CONSOLE=y
CONFIG_INOTIFY=y
# CONFIG_SERIAL_NONSTANDARD is not set

#
# Serial drivers
#
CONFIG_SERIAL_8250=y
# CONFIG_SERIAL_8250_CONSOLE is not set
# CONFIG_SERIAL_8250_CS is not set
# CONFIG_SERIAL_8250_ACPI is not set
CONFIG_SERIAL_8250_NR_UARTS=4
# CONFIG_SERIAL_8250_EXTENDED is not set

#
# Non-8250 serial port support
#
CONFIG_SERIAL_CORE=y
CONFIG_UNIX98_PTYS=y
CONFIG_LEGACY_PTYS=y
CONFIG_LEGACY_PTY_COUNT=256
CONFIG_PRINTER=m
# CONFIG_LP_CONSOLE is not set
# CONFIG_PPDEV is not set
# CONFIG_TIPAR is not set

#
# IPMI
#
# CONFIG_IPMI_HANDLER is not set

#
# Watchdog Cards
#
# CONFIG_WATCHDOG is not set
CONFIG_HW_RANDOM=m
# CONFIG_NVRAM is not set
CONFIG_RTC=m
CONFIG_GEN_RTC=m
CONFIG_GEN_RTC_X=y
# CONFIG_DTLK is not set
# CONFIG_R3964 is not set
# CONFIG_APPLICOM is not set
# CONFIG_SONYPI is not set

#
# Ftape, the floppy tape device driver
#
# CONFIG_FTAPE is not set
CONFIG_AGP=y
# CONFIG_AGP_ALI is not set
# CONFIG_AGP_ATI is not set
# CONFIG_AGP_AMD is not set
# CONFIG_AGP_AMD64 is not set
CONFIG_AGP_INTEL=y
# CONFIG_AGP_NVIDIA is not set
# CONFIG_AGP_SIS is not set
# CONFIG_AGP_SWORKS is not set
# CONFIG_AGP_VIA is not set
# CONFIG_AGP_EFFICEON is not set
CONFIG_DRM=y
# CONFIG_DRM_TDFX is not set
# CONFIG_DRM_GAMMA is not set
# CONFIG_DRM_R128 is not set
CONFIG_DRM_RADEON=y
# CONFIG_DRM_I810 is not set
# CONFIG_DRM_I830 is not set
# CONFIG_DRM_I915 is not set
# CONFIG_DRM_MGA is not set
# CONFIG_DRM_SIS is not set
# CONFIG_DRM_VIA is not set

#
# PCMCIA character devices
#
# CONFIG_SYNCLINK_CS is not set
# CONFIG_MWAVE is not set
# CONFIG_RAW_DRIVER is not set
# CONFIG_HPET is not set
# CONFIG_HANGCHECK_TIMER is not set

#
# TPM devices
#
# CONFIG_TCG_TPM is not set

#
# I2C support
#
# CONFIG_I2C is not set

#
# Dallas's 1-wire bus
#
# CONFIG_W1 is not set

#
# SuperIO subsystem support
#
# CONFIG_SC_SUPERIO is not set

#
# Misc devices
#
# CONFIG_IBM_ASM is not set

#
# Multimedia devices
#
# CONFIG_VIDEO_DEV is not set

#
# Digital Video Broadcasting Devices
#
# CONFIG_DVB is not set

#
# Graphics support
#
CONFIG_FB=y
CONFIG_FB_CFB_FILLRECT=y
CONFIG_FB_CFB_COPYAREA=y
CONFIG_FB_CFB_IMAGEBLIT=y
CONFIG_FB_SOFT_CURSOR=y
CONFIG_FB_MODE_HELPERS=y
# CONFIG_FB_TILEBLITTING is not set
# CONFIG_FB_CIRRUS is not set
# CONFIG_FB_PM2 is not set
# CONFIG_FB_CYBER2000 is not set
# CONFIG_FB_ASILIANT is not set
# CONFIG_FB_IMSTT is not set
# CONFIG_FB_VGA16 is not set
# CONFIG_FB_VESA is not set
CONFIG_VIDEO_SELECT=y
# CONFIG_FB_HGA is not set
# CONFIG_FB_NVIDIA is not set
# CONFIG_FB_RIVA is not set
# CONFIG_FB_I810 is not set
# CONFIG_FB_INTEL is not set
# CONFIG_FB_MATROX is not set
# CONFIG_FB_RADEON_OLD is not set
CONFIG_FB_RADEON=y
# CONFIG_FB_RADEON_I2C is not set
# CONFIG_FB_RADEON_DEBUG is not set
# CONFIG_FB_ATY128 is not set
# CONFIG_FB_ATY is not set
# CONFIG_FB_SAVAGE is not set
# CONFIG_FB_SIS is not set
# CONFIG_FB_NEOMAGIC is not set
# CONFIG_FB_KYRO is not set
# CONFIG_FB_3DFX is not set
# CONFIG_FB_VOODOO1 is not set
# CONFIG_FB_TRIDENT is not set
# CONFIG_FB_PM3 is not set
# CONFIG_FB_GEODE is not set
# CONFIG_FB_VIRTUAL is not set

#
# Console display driver support
#
CONFIG_VGA_CONSOLE=y
# CONFIG_MDA_CONSOLE is not set
CONFIG_DUMMY_CONSOLE=y
CONFIG_FRAMEBUFFER_CONSOLE=y
# CONFIG_FONTS is not set
CONFIG_FONT_8x8=y
CONFIG_FONT_8x16=y

#
# Logo configuration
#
CONFIG_LOGO=y
CONFIG_LOGO_LINUX_MONO=y
CONFIG_LOGO_LINUX_VGA16=y
CONFIG_LOGO_LINUX_CLUT224=y
# CONFIG_BACKLIGHT_LCD_SUPPORT is not set

#
# Sound
#
CONFIG_SOUND=m

#
# Advanced Linux Sound Architecture
#
CONFIG_SND=m
CONFIG_SND_TIMER=m
CONFIG_SND_PCM=m
CONFIG_SND_SEQUENCER=m
CONFIG_SND_SEQ_DUMMY=m
CONFIG_SND_OSSEMUL=y
CONFIG_SND_MIXER_OSS=m
CONFIG_SND_PCM_OSS=m
CONFIG_SND_SEQUENCER_OSS=y
# CONFIG_SND_RTCTIMER is not set
# CONFIG_SND_VERBOSE_PRINTK is not set
# CONFIG_SND_DEBUG is not set

#
# Generic devices
#
# CONFIG_SND_DUMMY is not set
# CONFIG_SND_VIRMIDI is not set
# CONFIG_SND_MTPAV is not set
# CONFIG_SND_SERIAL_U16550 is not set
# CONFIG_SND_MPU401 is not set

#
# ISA devices
#
# CONFIG_SND_AD1848 is not set
# CONFIG_SND_CS4231 is not set
# CONFIG_SND_CS4232 is not set
# CONFIG_SND_CS4236 is not set
# CONFIG_SND_ES1688 is not set
# CONFIG_SND_ES18XX is not set
# CONFIG_SND_GUSCLASSIC is not set
# CONFIG_SND_GUSEXTREME is not set
# CONFIG_SND_GUSMAX is not set
# CONFIG_SND_INTERWAVE is not set
# CONFIG_SND_INTERWAVE_STB is not set
# CONFIG_SND_OPTI92X_AD1848 is not set
# CONFIG_SND_OPTI92X_CS4231 is not set
# CONFIG_SND_OPTI93X is not set
# CONFIG_SND_SB8 is not set
# CONFIG_SND_SB16 is not set
# CONFIG_SND_SBAWE is not set
# CONFIG_SND_WAVEFRONT is not set
# CONFIG_SND_CMI8330 is not set
# CONFIG_SND_OPL3SA2 is not set
# CONFIG_SND_SGALAXY is not set
# CONFIG_SND_SSCAPE is not set

#
# PCI devices
#
CONFIG_SND_AC97_CODEC=m
# CONFIG_SND_ALI5451 is not set
# CONFIG_SND_ATIIXP is not set
# CONFIG_SND_ATIIXP_MODEM is not set
# CONFIG_SND_AU8810 is not set
# CONFIG_SND_AU8820 is not set
# CONFIG_SND_AU8830 is not set
# CONFIG_SND_AZT3328 is not set
# CONFIG_SND_BT87X is not set
# CONFIG_SND_CS46XX is not set
# CONFIG_SND_CS4281 is not set
# CONFIG_SND_EMU10K1 is not set
# CONFIG_SND_EMU10K1X is not set
# CONFIG_SND_CA0106 is not set
# CONFIG_SND_KORG1212 is not set
# CONFIG_SND_MIXART is not set
# CONFIG_SND_NM256 is not set
# CONFIG_SND_RME32 is not set
# CONFIG_SND_RME96 is not set
# CONFIG_SND_RME9652 is not set
# CONFIG_SND_HDSP is not set
# CONFIG_SND_TRIDENT is not set
# CONFIG_SND_YMFPCI is not set
# CONFIG_SND_ALS4000 is not set
# CONFIG_SND_CMIPCI is not set
# CONFIG_SND_ENS1370 is not set
# CONFIG_SND_ENS1371 is not set
# CONFIG_SND_ES1938 is not set
# CONFIG_SND_ES1968 is not set
CONFIG_SND_MAESTRO3=m
# CONFIG_SND_FM801 is not set
# CONFIG_SND_ICE1712 is not set
# CONFIG_SND_ICE1724 is not set
# CONFIG_SND_INTEL8X0 is not set
# CONFIG_SND_INTEL8X0M is not set
# CONFIG_SND_SONICVIBES is not set
# CONFIG_SND_VIA82XX is not set
# CONFIG_SND_VIA82XX_MODEM is not set
# CONFIG_SND_VX222 is not set
CONFIG_SND_HDA_INTEL=m

#
# USB devices
#
# CONFIG_SND_USB_AUDIO is not set
# CONFIG_SND_USB_USX2Y is not set

#
# PCMCIA devices
#
# CONFIG_SND_VXPOCKET is not set
# CONFIG_SND_VXP440 is not set
# CONFIG_SND_PDAUDIOCF is not set

#
# Open Sound System
#
# CONFIG_SOUND_PRIME is not set

#
# USB support
#
CONFIG_USB_ARCH_HAS_HCD=y
CONFIG_USB_ARCH_HAS_OHCI=y
CONFIG_USB=m
# CONFIG_USB_DEBUG is not set

#
# Miscellaneous USB options
#
CONFIG_USB_DEVICEFS=y
CONFIG_USB_BANDWIDTH=y
# CONFIG_USB_DYNAMIC_MINORS is not set
CONFIG_USB_SUSPEND=y
# CONFIG_USB_OTG is not set

#
# USB Host Controller Drivers
#
# CONFIG_USB_EHCI_HCD is not set
# CONFIG_USB_OHCI_HCD is not set
CONFIG_USB_UHCI_HCD=m
# CONFIG_USB_SL811_HCD is not set

#
# USB Device Class drivers
#
# CONFIG_USB_AUDIO is not set
# CONFIG_USB_BLUETOOTH_TTY is not set
# CONFIG_USB_MIDI is not set
# CONFIG_USB_ACM is not set
# CONFIG_USB_PRINTER is not set

#
# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' may also be needed; see USB_STORAGE Help for more information #
CONFIG_USB_STORAGE=m
# CONFIG_USB_STORAGE_DEBUG is not set
# CONFIG_USB_STORAGE_RW_DETECT is not set
# CONFIG_USB_STORAGE_DATAFAB is not set
# CONFIG_USB_STORAGE_FREECOM is not set
# CONFIG_USB_STORAGE_ISD200 is not set
# CONFIG_USB_STORAGE_DPCM is not set
# CONFIG_USB_STORAGE_USBAT is not set
# CONFIG_USB_STORAGE_SDDR09 is not set
# CONFIG_USB_STORAGE_SDDR55 is not set
# CONFIG_USB_STORAGE_JUMPSHOT is not set

#
# USB Input Devices
#
CONFIG_USB_HID=m
CONFIG_USB_HIDINPUT=y
# CONFIG_HID_FF is not set
CONFIG_USB_HIDDEV=y

#
# USB HID Boot Protocol drivers
#
# CONFIG_USB_KBD is not set
# CONFIG_USB_MOUSE is not set
# CONFIG_USB_AIPTEK is not set
# CONFIG_USB_WACOM is not set
# CONFIG_USB_KBTAB is not set
# CONFIG_USB_POWERMATE is not set
# CONFIG_USB_MTOUCH is not set
# CONFIG_USB_EGALAX is not set
# CONFIG_USB_XPAD is not set
# CONFIG_USB_ATI_REMOTE is not set

#
# USB Imaging devices
#
# CONFIG_USB_MDC800 is not set
# CONFIG_USB_MICROTEK is not set
# CONFIG_USB_HPUSBSCSI is not set

#
# USB Multimedia devices
#
# CONFIG_USB_DABUSB is not set

#
# Video4Linux support is needed for USB Multimedia device support #

#
# USB Network Adapters
#
# CONFIG_USB_CATC is not set
# CONFIG_USB_KAWETH is not set
# CONFIG_USB_PEGASUS is not set
# CONFIG_USB_RTL8150 is not set
# CONFIG_USB_USBNET is not set
CONFIG_USB_MON=m

#
# USB port drivers
#
# CONFIG_USB_USS720 is not set

#
# USB Serial Converter support
#
CONFIG_USB_SERIAL=m
# CONFIG_USB_SERIAL_GENERIC is not set
# CONFIG_USB_SERIAL_BELKIN is not set
# CONFIG_USB_SERIAL_WHITEHEAT is not set
# CONFIG_USB_SERIAL_DIGI_ACCELEPORT is not set
# CONFIG_USB_SERIAL_CYPRESS_M8 is not set
# CONFIG_USB_SERIAL_EMPEG is not set
# CONFIG_USB_SERIAL_FTDI_SIO is not set
CONFIG_USB_SERIAL_VISOR=m
# CONFIG_USB_SERIAL_IPAQ is not set
# CONFIG_USB_SERIAL_IR is not set
# CONFIG_USB_SERIAL_EDGEPORT is not set
# CONFIG_USB_SERIAL_EDGEPORT_TI is not set
# CONFIG_USB_SERIAL_GARMIN is not set
# CONFIG_USB_SERIAL_IPW is not set
# CONFIG_USB_SERIAL_KEYSPAN_PDA is not set
# CONFIG_USB_SERIAL_KEYSPAN is not set
# CONFIG_USB_SERIAL_KLSI is not set
# CONFIG_USB_SERIAL_KOBIL_SCT is not set
# CONFIG_USB_SERIAL_MCT_U232 is not set
# CONFIG_USB_SERIAL_PL2303 is not set
# CONFIG_USB_SERIAL_SAFE is not set
# CONFIG_USB_SERIAL_TI is not set
# CONFIG_USB_SERIAL_CYBERJACK is not set
# CONFIG_USB_SERIAL_XIRCOM is not set
# CONFIG_USB_SERIAL_OMNINET is not set

#
# USB Miscellaneous drivers
#
# CONFIG_USB_EMI62 is not set
# CONFIG_USB_EMI26 is not set
# CONFIG_USB_AUERSWALD is not set
# CONFIG_USB_RIO500 is not set
# CONFIG_USB_LEGOTOWER is not set
# CONFIG_USB_LCD is not set
# CONFIG_USB_LED is not set
# CONFIG_USB_CYTHERM is not set
# CONFIG_USB_PHIDGETKIT is not set
# CONFIG_USB_PHIDGETSERVO is not set
# CONFIG_USB_IDMOUSE is not set
# CONFIG_USB_TEST is not set

#
# USB ATM/DSL drivers
#

#
# USB Gadget Support
#
# CONFIG_USB_GADGET is not set

#
# MMC/SD Card support
#
# CONFIG_MMC is not set

#
# InfiniBand support
#
# CONFIG_INFINIBAND is not set

#
# File systems
#
CONFIG_EXT2_FS=y
CONFIG_EXT2_FS_XATTR=y
CONFIG_EXT2_FS_POSIX_ACL=y
CONFIG_EXT2_FS_SECURITY=y
CONFIG_EXT3_FS=y
CONFIG_EXT3_FS_XATTR=y
CONFIG_EXT3_FS_POSIX_ACL=y
CONFIG_EXT3_FS_SECURITY=y
CONFIG_JBD=y
# CONFIG_JBD_DEBUG is not set
CONFIG_FS_MBCACHE=y
CONFIG_REISERFS_FS=m
# CONFIG_REISERFS_CHECK is not set
CONFIG_REISERFS_PROC_INFO=y
CONFIG_REISERFS_FS_XATTR=y
CONFIG_REISERFS_FS_POSIX_ACL=y
# CONFIG_REISERFS_FS_SECURITY is not set
# CONFIG_JFS_FS is not set
CONFIG_FS_POSIX_ACL=y

#
# XFS support
#
# CONFIG_XFS_FS is not set
# CONFIG_MINIX_FS is not set
# CONFIG_ROMFS_FS is not set
# CONFIG_QUOTA is not set
CONFIG_DNOTIFY=y
CONFIG_AUTOFS_FS=m
CONFIG_AUTOFS4_FS=m

#
# Caches
#
# CONFIG_FSCACHE is not set
CONFIG_FUSE_FS=m

#
# CD-ROM/DVD Filesystems
#
CONFIG_ISO9660_FS=m
CONFIG_JOLIET=y
CONFIG_ZISOFS=y
CONFIG_ZISOFS_FS=m
CONFIG_UDF_FS=m
CONFIG_UDF_NLS=y

#
# DOS/FAT/NT Filesystems
#
CONFIG_FAT_FS=m
CONFIG_MSDOS_FS=m
CONFIG_VFAT_FS=m
CONFIG_FAT_DEFAULT_CODEPAGE=850
CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-15"
# CONFIG_NTFS_FS is not set

#
# Pseudo filesystems
#
CONFIG_PROC_FS=y
CONFIG_PROC_KCORE=y
CONFIG_SYSFS=y
CONFIG_DEVFS_FS=y
# CONFIG_DEVFS_MOUNT is not set
# CONFIG_DEVFS_DEBUG is not set
# CONFIG_DEVPTS_FS_XATTR is not set
CONFIG_TMPFS=y
# CONFIG_TMPFS_XATTR is not set
# CONFIG_HUGETLBFS is not set
# CONFIG_HUGETLB_PAGE is not set
CONFIG_RAMFS=y

#
# Miscellaneous filesystems
#
# CONFIG_ADFS_FS is not set
# CONFIG_AFFS_FS is not set
# CONFIG_HFS_FS is not set
# CONFIG_HFSPLUS_FS is not set
# CONFIG_BEFS_FS is not set
# CONFIG_BFS_FS is not set
# CONFIG_EFS_FS is not set
# CONFIG_CRAMFS is not set
# CONFIG_VXFS_FS is not set
# CONFIG_HPFS_FS is not set
# CONFIG_QNX4FS_FS is not set
# CONFIG_SYSV_FS is not set
# CONFIG_UFS_FS is not set

#
# Network File Systems
#
CONFIG_NFS_FS=m
CONFIG_NFS_V3=y
CONFIG_NFS_ACL=y
# CONFIG_NFS_V4 is not set
# CONFIG_NFS_DIRECTIO is not set
CONFIG_NFSD=m
CONFIG_NFSD_V3=y
CONFIG_NFSD_ACL=y
CONFIG_NFS_ACL_SUPPORT=m
# CONFIG_NFSD_V4 is not set
# CONFIG_NFSD_TCP is not set
CONFIG_LOCKD=m
CONFIG_LOCKD_V4=y
CONFIG_EXPORTFS=m
CONFIG_SUNRPC=m
# CONFIG_RPCSEC_GSS_KRB5 is not set
# CONFIG_RPCSEC_GSS_SPKM3 is not set
CONFIG_SMB_FS=m
CONFIG_SMB_NLS_DEFAULT=y
CONFIG_SMB_NLS_REMOTE="cp850"
CONFIG_CIFS=m
CONFIG_CIFS_STATS=y
CONFIG_CIFS_XATTR=y
CONFIG_CIFS_POSIX=y
# CONFIG_CIFS_EXPERIMENTAL is not set
# CONFIG_NCP_FS is not set
# CONFIG_CODA_FS is not set
# CONFIG_AFS_FS is not set

#
# Partition Types
#
# CONFIG_PARTITION_ADVANCED is not set
CONFIG_MSDOS_PARTITION=y

#
# Native Language Support
#
CONFIG_NLS=m
CONFIG_NLS_DEFAULT="iso8859-15"
CONFIG_NLS_CODEPAGE_437=m
# CONFIG_NLS_CODEPAGE_737 is not set
# CONFIG_NLS_CODEPAGE_775 is not set
CONFIG_NLS_CODEPAGE_850=m
# CONFIG_NLS_CODEPAGE_852 is not set
# CONFIG_NLS_CODEPAGE_855 is not set
# CONFIG_NLS_CODEPAGE_857 is not set
# CONFIG_NLS_CODEPAGE_860 is not set
# CONFIG_NLS_CODEPAGE_861 is not set
# CONFIG_NLS_CODEPAGE_862 is not set
# CONFIG_NLS_CODEPAGE_863 is not set
# CONFIG_NLS_CODEPAGE_864 is not set
# CONFIG_NLS_CODEPAGE_865 is not set
# CONFIG_NLS_CODEPAGE_866 is not set
# CONFIG_NLS_CODEPAGE_869 is not set
# CONFIG_NLS_CODEPAGE_936 is not set
# CONFIG_NLS_CODEPAGE_950 is not set
# CONFIG_NLS_CODEPAGE_932 is not set
# CONFIG_NLS_CODEPAGE_949 is not set
# CONFIG_NLS_CODEPAGE_874 is not set
# CONFIG_NLS_ISO8859_8 is not set
# CONFIG_NLS_CODEPAGE_1250 is not set
# CONFIG_NLS_CODEPAGE_1251 is not set
# CONFIG_NLS_ASCII is not set
CONFIG_NLS_ISO8859_1=m
# CONFIG_NLS_ISO8859_2 is not set
# CONFIG_NLS_ISO8859_3 is not set
# CONFIG_NLS_ISO8859_4 is not set
# CONFIG_NLS_ISO8859_5 is not set
# CONFIG_NLS_ISO8859_6 is not set
# CONFIG_NLS_ISO8859_7 is not set
# CONFIG_NLS_ISO8859_9 is not set
# CONFIG_NLS_ISO8859_13 is not set
# CONFIG_NLS_ISO8859_14 is not set
CONFIG_NLS_ISO8859_15=m
# CONFIG_NLS_KOI8_R is not set
# CONFIG_NLS_KOI8_U is not set
CONFIG_NLS_UTF8=m

#
# Profiling support
#
# CONFIG_PROFILING is not set

#
# Kernel hacking
#
CONFIG_DEBUG_KERNEL=y
CONFIG_MAGIC_SYSRQ=y
CONFIG_LOG_BUF_SHIFT=14
CONFIG_DETECT_SOFTLOCKUP=y
CONFIG_PRINTK_TIME=y
CONFIG_SCHEDSTATS=y
# CONFIG_DEBUG_SLAB is not set
CONFIG_DEBUG_PREEMPT=y
# CONFIG_DEBUG_SPINLOCK is not set
# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
# CONFIG_DEBUG_KOBJECT is not set
CONFIG_DEBUG_BUGVERBOSE=y
# CONFIG_DEBUG_INFO is not set
# CONFIG_PAGE_OWNER is not set
CONFIG_DEBUG_FS=y
# CONFIG_FRAME_POINTER is not set
CONFIG_EARLY_PRINTK=y
# CONFIG_DEBUG_STACKOVERFLOW is not set
# CONFIG_KPROBES is not set
# CONFIG_DEBUG_STACK_USAGE is not set
# CONFIG_DEBUG_PAGEALLOC is not set
CONFIG_4KSTACKS=y
CONFIG_X86_FIND_SMP_CONFIG=y
CONFIG_X86_MPPARSE=y
# CONFIG_KGDB is not set

#
# Security options
#
# CONFIG_KEYS is not set
# CONFIG_SECURITY is not set

#
# Cryptographic options
#
# CONFIG_CRYPTO is not set

#
# Hardware crypto devices
#

#
# Library routines
#
CONFIG_CRC_CCITT=m
CONFIG_CRC32=y
# CONFIG_LIBCRC32C is not set
CONFIG_ZLIB_INFLATE=m
CONFIG_ZLIB_DEFLATE=m
CONFIG_GENERIC_HARDIRQS=y
CONFIG_GENERIC_IRQ_PROBE=y
CONFIG_X86_BIOS_REBOOT=y
CONFIG_PC=y

pages, LIFO batch:1
DMI 2.3 present.
ACPI: RSDP (v000 COMPAQ ) @ 0x000f9970
ACPI: RSDT (v001 COMPAQ CPQ0030 0x31120320 CPQ 0x00000001) @ 0x27ff0c84
ACPI: FADT (v002 COMPAQ CPQ0030 0x00000002 CPQ 0x00000001) @ 0x27ff0c00
ACPI: SSDT (v001 COMPAQ CPQCPU 0x00001001 MSFT 0x0100000e) @ 0x27ff7bcb
ACPI: SSDT (v001 COMPAQ CPQGysr 0x00001001 MSFT 0x0100000e) @ 0x27ff7c16
ACPI: DSDT (v001 COMPAQ EVON600C 0x00010000 MSFT 0x0100000e) @ 0x00000000
ACPI: PM-Timer IO Port: 0x1008
Built 1 zonelists
Kernel command line: BOOT_IMAGE=2.6-rc ro root=302 resume=/dev/hda4
Local APIC disabled by BIOS -- you can enable it with "lapic"
mapped APIC to ffffd000 (01502000)
Initializing CPU#0
CPU 0 irqstacks, hard=c0479000 soft=c0478000
PID hash table entries: 4096 (order: 12, 65536 bytes)
Detected 996.669 MHz processor.
Using pmtmr for high-res timesource
Console: colour VGA+ 80x25
Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
Memory: 644948k/655168k available (2213k kernel code, 9700k reserved, 1127k data, 184k init, 0k highmem)
Checking if this processor honours the WP bit even in supervisor mode... Ok.
Calibrating delay loop... 1978.36 BogoMIPS (lpj=989184)
Mount-cache hash table entries: 512 (order: 0, 4096 bytes)
CPU: After generic identify, caps: 0383f9ff 00000000 00000000 00000000 00000000 00000000 00000000
CPU: After vendor identify, caps: 0383f9ff 00000000 00000000 00000000 00000000 00000000 00000000
CPU: L1 I cache: 16K, L1 D cache: 16K
CPU: L2 cache: 512K
CPU: After all inits, caps: 0383f9ff 00000000 00000000 00000040 00000000 00000000 00000000
Intel machine check architecture supported.
Intel machine check reporting enabled on CPU#0.
CPU: Intel(R) Pentium(R) III Mobile CPU 1000MHz stepping 01
Enabling fast FPU save and restore... done.
Enabling unmasked SIMD FPU exception support... done.
Checking 'hlt' instruction... OK.
tbxface-0118 [02] acpi_load_tables : ACPI Tables successfully acquired
Parsing all Control Methods:.......................................................................................................................................................................................................................................................................... Table [DSDT](id F006) - 833 Objects with 89 Devices 266 Methods 26 Regions
Parsing all Control Methods:.
Table [SSDT](id F003) - 3 Objects with 0 Devices 1 Methods 0 Regions
Parsing all Control Methods:..
Table [SSDT](id F004) - 4 Objects with 0 Devices 2 Methods 0 Regions
ACPI Namespace successfully loaded at root c0491500
ACPI: setting ELCR to 0200 (from 0800)
evxfevnt-0094 [03] acpi_enable : Transition to ACPI mode successful
NET: Registered protocol family 16
PCI: PCI BIOS revision 2.10 entry at 0xf04dd, last bus=4
PCI: Using configuration type 1
mtrr: v2.0 (20020519)
ACPI: Subsystem revision 20050125

evgpeblk-0275 [08] ev_save_method_info   : Unknown GPE method type: C13E (name not of form _Lxx or _Exx)
evgpeblk-0275 [08] ev_save_method_info   : Unknown GPE method type: C18F (name not of form _Lxx or _Exx)
evgpeblk-0275 [08] ev_save_method_info   : Unknown GPE method type: C1DC (name not of form _Lxx or _Exx)
evgpeblk-0979 [06] ev_create_gpe_block   : GPE 00 to 0F [_GPE] 2 regs on int 0x9
evgpeblk-0987 [06] ev_create_gpe_block   : Found 3 Wake, Enabled 1 Runtime GPEs in this block
evgpeblk-0275 [08] ev_save_method_info   : Unknown GPE method type: C13E (name not of form _Lxx or _Exx)
evgpeblk-0275 [08] ev_save_method_info   : Unknown GPE method type: C18F (name not of form _Lxx or _Exx)
evgpeblk-0275 [08] ev_save_method_info   : Unknown GPE method type: C1DC (name not of form _Lxx or _Exx)
evgpeblk-0979 [06] ev_create_gpe_block   : GPE 10 to 1F [_GPE] 2 regs on int 0x9
evgpeblk-0987 [06] ev_create_gpe_block   : Found 2 Wake, Enabled 5 Runtime GPEs in this block

Completing Region/Field/Buffer/Package initialization:.................................................................................................. Initialized 25/26 Regions 0/0 Fields 26/26 Buffers 47/56 Packages (849 nodes)
Executing all Device _STA and_INI methods:........................................................................................... 91 Devices found containing: 91 _STA, 8 _INI methods
ACPI: Interpreter enabled
ACPI: Using PIC for interrupt routing
ACPI: PCI Root Bridge [C03E] (00:00)
PCI: Probing PCI hardware (bus 00)
PCI: Ignoring BAR0-3 of IDE controller 0000:00:1f.1
PCI: Transparent bridge - 0000:00:1e.0
ACPI: PCI Interrupt Routing Table [\_SB_.C03E._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.C03E.C03F._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.C03E.C052._PRT]
ACPI: Power Resource [C14E] (on)
ACPI: Power Resource [C167] (on)
ACPI: Power Resource [C16B] (on)
ACPI: Power Resource [C174] (on)
ACPI: PCI Interrupt Link [C0BA] (IRQs 5 10 *11)
ACPI: PCI Interrupt Link [C0BB] (IRQs 5 10 *11)
ACPI: PCI Interrupt Link [C0BC] (IRQs 5 10 *11)
ACPI: PCI Interrupt Link [C0BD] (IRQs 5 10 *11)
ACPI: PCI Interrupt Link [C0BE] (IRQs 5 10 *11)
ACPI: PCI Interrupt Link [C0BF] (IRQs 5 10 *11)
ACPI: PCI Interrupt Link [C0C0] (IRQs 5 10 *11)
ACPI: PCI Interrupt Link [C0C1] (IRQs 5 10 11) *0, disabled.
ACPI: Power Resource [C1F3] (off)
ACPI: Power Resource [C1F4] (off)
ACPI: Power Resource [C1F5] (off)
Linux Plug and Play Support v0.97 (c) Adam Belay
pnp: PnP ACPI init
pnp: PnP ACPI: found 14 devices
PnPBIOS: Disabled by ACPI PNP
SCSI subsystem initialized
PCI: Using ACPI for IRQ routing
** PCI interrupts are no longer routed automatically. If this
** causes a device to stop working, it is probably because the
** driver failed to call pci_enable_device(). As a temporary
** workaround, the "pci=routeirq" argument restores the old
** behavior. If this argument makes the device work again,
** please email the output of "lspci" to [email protected]
** so I can fix the driver.
pnp: 00:0b: ioport range 0x140-0x14f has been reserved
pnp: 00:0c: ioport range 0x4d0-0x4d1 has been reserved
pnp: 00:0c: ioport range 0x1000-0x1087 could not be reserved
pnp: 00:0c: ioport range 0x1100-0x113f has been reserved
pnp: 00:0c: ioport range 0x1200-0x121f has been reserved
Machine check exception polling timer started.
apm: BIOS version 1.2 Flags 0x03 (Driver version 1.16ac)
apm: overridden by ACPI.
devfs: 2004-01-31 Richard Gooch ([email protected])
devfs: boot_options: 0x0
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
fakephp: Fake PCI Hot Plug Controller Driver
cpqphp: Compaq Hot Plug PCI Controller Driver version: 0.9.8
ACPI: PCI Interrupt Link [C0BB] enabled at IRQ 11
PCI: setting IRQ 11 as level-triggered
ACPI: PCI interrupt 0000:01:00.0[A] -> GSI 11 (level, low) -> IRQ 11
radeonfb: Retreived PLL infos from BIOS
radeonfb: Reference=27.00 MHz (RefDiv=60) Memory=166.00 Mhz, System=166.00 MHz
radeonfb: PLL min 12000 max 35000
Non-DDC laptop panel detected
radeonfb: Monitor 1 type LCD found
radeonfb: Monitor 2 type no found
radeonfb: panel ID string: 1024x768
radeonfb: detected LVDS panel size from BIOS: 1024x768
radeondb: BIOS provided dividers will be used
radeonfb: Dynamic Clock Power Management enabled
Console: switching to colour frame buffer device 128x48
radeonfb (0000:01:00.0): ATI Radeon LY
ACPI: AC Adapter [C1A2] (on-line)
ACPI: Battery Slot [C19F] (battery present)
ACPI: Battery Slot [C1A0] (battery absent)
ACPI: Power Button (FF) [PWRF]
ACPI: Sleep Button (CM) [C1A3]
ACPI: Lid Switch [C1A4]
ACPI: Fan [C1F6] (off)
ACPI: Fan [C1F7] (off)
ACPI: Fan [C1F8] (off)
ACPI: CPU0 (power states: C1[C1] C2[C2] C3[C3])
ACPI: Thermal Zone [TZ1] (44 C)
Linux agpgart interface v0.100 (c) Dave Jones
agpgart: Detected an Intel 830M Chipset.
agpgart: Maximum main memory to use for agp memory: 564M
agpgart: AGP aperture is 256M @ 0x60000000
[drm] Initialized drm 1.0.0 20040925
ACPI: PCI interrupt 0000:01:00.0[A] -> GSI 11 (level, low) -> IRQ 11
[drm] Initialized radeon 1.14.0 20050125 on minor 0: ATI Technologies Inc Radeon Mobility M6 LY
ACPI: PS/2 Keyboard Controller [C171] at I/O 0x60, 0x64, irq 1
ACPI: PS/2 Mouse Controller [C172] at irq 12
i8042.c: Detected active multiplexing controller, rev 1.1.
serio: i8042 AUX0 port at 0x60,0x64 irq 12
serio: i8042 AUX1 port at 0x60,0x64 irq 12
serio: i8042 AUX2 port at 0x60,0x64 irq 12
serio: i8042 AUX3 port at 0x60,0x64 irq 12
serio: i8042 KBD port at 0x60,0x64 irq 1
Serial: 8250/16550 driver $Revision: 1.90 $ 8 ports, IRQ sharing disabled
ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
ttyS2 at I/O 0x3e8 (irq = 4) is a 16550A
ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
io scheduler noop registered
io scheduler anticipatory registered
io scheduler deadline registered
io scheduler cfq registered
e100: Intel(R) PRO/100 Network Driver, 3.3.6-k2-NAPI
e100: Copyright(c) 1999-2004 Intel Corporation
ACPI: PCI Interrupt Link [C0BE] enabled at IRQ 11
ACPI: PCI interrupt 0000:02:08.0[A] -> GSI 11 (level, low) -> IRQ 11
e100: eth0: e100_probe: addr 0x40100000, irq 11, MAC addr 00:02:A5:B5:03:7C
Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
ICH3M: IDE controller at PCI slot 0000:00:1f.1
PCI: Enabling device 0000:00:1f.1 (0005 -> 0007)
ACPI: PCI Interrupt Link [C0BC] enabled at IRQ 11
ACPI: PCI interrupt 0000:00:1f.1[A] -> GSI 11 (level, low) -> IRQ 11
ICH3M: chipset revision 1
ICH3M: not 100% native mode: will probe irqs later

    ide0: BM-DMA at 0x4060-0x4067, BIOS settings: hda:DMA, hdb:pio
    ide1: BM-DMA at 0x4068-0x406f, BIOS settings: hdc:DMA, hdd:pio

Probing IDE interface ide0...
hda: IC25N020ATDA04-0, ATA DISK drive
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
Probing IDE interface ide1...
hdc: Compaq DVD-ROM SD-C2402, ATAPI CD/DVD-ROM drive
ide1 at 0x170-0x177,0x376 on irq 15
ide2: I/O resource 0x3EE-0x3EE not free.
ide2: ports already in use, skipping probe
Probing IDE interface ide3...
Probing IDE interface ide4...
Probing IDE interface ide5...
hda: max request size: 128KiB
hda: 39070080 sectors (20003 MB) w/1806KiB Cache, CHS=38760/16/63, UDMA(100)
hda: cache flushes not supported
/dev/ide/host0/bus0/target0/lun0: p1 p2 p3 p4
hdc: ATAPI 24X DVD-ROM drive, 128kB Cache, DMA
Uniform CD-ROM driver Revision: 3.20
mice: PS/2 mouse device common for all mice
input: AT Translated Set 2 keyboard on isa0060/serio0
Synaptics Touchpad, model: 1
Firmware: 5.8
180 degree mounted touchpad
Sensor: 27
new absolute packet format
Touchpad has extended capability bits
-> multifinger detection
-> palm detection
-> pass-through port
input: SynPS/2 Synaptics TouchPad on isa0060/serio4
serio: Synaptics pass-through port at isa0060/serio4/input0
input: PS/2 Generic Mouse on synaptics-pt/serio0
NET: Registered protocol family 2
IP: routing cache hash table of 8192 buckets, 64Kbytes
TCP established hash table entries: 131072 (order: 8, 1048576 bytes) TCP bind hash table entries: 65536 (order: 6, 262144 bytes)
TCP: Hash tables configured (established 131072 bind 65536)
NET: Registered protocol family 1
NET: Registered protocol family 17
PM: Reading swsusp image.
swsusp: Resume From Partition: /dev/hda4
<3>swsusp: Suspend partition has wrong signature?
swsusp: Error -22 resuming
PM: Resume from disk failed.
ACPI wakeup devices:
C052 C17E C185 C0A4 C0AA C19F C1A0 C1A3 C1A4
ACPI: (supports S0 S1 S3 S4 S4bios S5)
EXT3-fs: hda2: orphan cleanup on readonly fs
kjournald starting. Commit interval 5 seconds
ext3_orphan_cleanup: deleting unreferenced inode 531211
ext3_orphan_cleanup: deleting unreferenced inode 531208
EXT3-fs: hda2: 2 orphan inodes deleted
EXT3-fs: recovery complete.
EXT3-fs: mounted filesystem with ordered data mode.
VFS: Mounted root (ext3 filesystem) readonly.
Freeing unused kernel memory: 184k freed
Adding 665272k swap on /dev/hda4. Priority:-1 extents:1
EXT3 FS on hda2, internal journal
Linux video capture interface: v1.00
usbcore: registered new driver usbfs
usbcore: registered new driver hub
usbcore: registered new driver spca50x /home/src/spca5xx-20050206/drivers/usb/spca50x.c: spca5xx driver 56.02.06 registered
device-mapper: 4.4.0-ioctl (2005-01-12) initialised: [email protected] kjournald starting. Commit interval 5 seconds
EXT3 FS on hda3, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
ACPI: PCI Interrupt Link [C0BA] enabled at IRQ 11
ACPI: PCI interrupt 0000:02:09.0[A] -> GSI 11 (level, low) -> IRQ 11 Linux Kernel Card Services
options: [pci] [cardbus] [pm]
PCI: 0000:02:03.0 has unsupported PM cap regs version (1)
ACPI: PCI Interrupt Link [C0C0] enabled at IRQ 11
ACPI: PCI interrupt 0000:02:03.0[A] -> GSI 11 (level, low) -> IRQ 11
Yenta: CardBus bridge found at 0000:02:03.0 [0e11:004e]
PCI: 0000:02:03.0 has unsupported PM cap regs version (1)
Yenta: Enabling burst memory read transactions
Yenta: Using CSCINT to route CSC interrupts to PCI
Yenta: Routing CardBus interrupts to PCI
Yenta TI: socket 0000:02:03.0, mfunc 0x01001002, devctl 0x64
Yenta: ISA IRQ mask 0x04f8, PCI irq 11
Socket status: 30000006
PCI: 0000:02:03.1 has unsupported PM cap regs version (1)
ACPI: PCI interrupt 0000:02:03.1[A] -> GSI 11 (level, low) -> IRQ 11
Yenta: CardBus bridge found at 0000:02:03.1 [0e11:004e]
PCI: 0000:02:03.1 has unsupported PM cap regs version (1)
Yenta: Using CSCINT to route CSC interrupts to PCI
Yenta: Routing CardBus interrupts to PCI
Yenta TI: socket 0000:02:03.1, mfunc 0x01001002, devctl 0x64
Yenta: ISA IRQ mask 0x04f8, PCI irq 11
Socket status: 30000006
irda_init()
NET: Registered protocol family 23
parport: PnPBIOS parport detected.
parport0: PC-style at 0x378, irq 7 [PCSPP(,...)]
input: PC Speaker
Real Time Clock Driver v1.12
USB Universal Host Controller Interface driver v2.2
ACPI: PCI interrupt 0000:00:1d.0[A] -> GSI 11 (level, low) -> IRQ 11 uhci_hcd 0000:00:1d.0: Intel Corp. 82801CA/CAM USB (Hub #1)
PCI: Setting latency timer of device 0000:00:1d.0 to 64
uhci_hcd 0000:00:1d.0: irq 11, io base 0x4000
uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 1 hub 1-0:1.0: USB hub found
hub 1-0:1.0: 2 ports detected
ACPI: PCI Interrupt Link [C0BD] enabled at IRQ 11
ACPI: PCI interrupt 0000:00:1d.1[B] -> GSI 11 (level, low) -> IRQ 11 uhci_hcd 0000:00:1d.1: Intel Corp. 82801CA/CAM USB (Hub #2)
PCI: Setting latency timer of device 0000:00:1d.1 to 64
uhci_hcd 0000:00:1d.1: irq 11, io base 0x4020
uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 2 hub 2-0:1.0: USB hub found
hub 2-0:1.0: 2 ports detected
ACPI: PCI interrupt 0000:00:1d.2[C] -> GSI 11 (level, low) -> IRQ 11 uhci_hcd 0000:00:1d.2: Intel Corp. 82801CA/CAM USB (Hub #3)
PCI: Setting latency timer of device 0000:00:1d.2 to 64
uhci_hcd 0000:00:1d.2: irq 11, io base 0x4040
uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 3 hub 3-0:1.0: USB hub found
hub 3-0:1.0: 2 ports detected
hw_random hardware driver 1.0.0 loaded
cs: IO port probe 0x100-0x4ff: excluding 0x100-0x107 0x200-0x207
cs: IO port probe 0x100-0x4ff: excluding 0x100-0x107 0x200-0x207
cs: IO port probe 0x800-0x8ff: clean.
cs: IO port probe 0x800-0x8ff: clean.
cs: IO port probe 0xc00-0xcff: clean.
cs: IO port probe 0xc00-0xcff: clean.
cs: IO port probe 0xa00-0xaff: clean.
cs: IO port probe 0xa00-0xaff: clean.
agpgart: Found an AGP 2.0 compliant device at 0000:00:00.0.
agpgart: Putting AGP V2 device at 0000:00:00.0 into 4x mode
agpgart: Putting AGP V2 device at 0000:01:00.0 into 4x mode

s on int 0x9
evgpeblk-0987 [06] ev_create_gpe_block : Found 2 Wake, Enabled 5 Runtime GPEs in this block
Completing Region/Field/Buffer/Package initialization:.................................................................................................. Initialized 25/26 Regions 0/0 Fields 26/26 Buffers 47/56 Packages (849 nodes)
Executing all Device _STA and_INI methods:........................................................................................... 91 Devices found containing: 91 _STA, 8 _INI methods
ACPI: Interpreter enabled
ACPI: Using PIC for interrupt routing
ACPI: PCI Root Bridge [C03E] (00:00)
PCI: Probing PCI hardware (bus 00)
PCI: Ignoring BAR0-3 of IDE controller 0000:00:1f.1
ACPI: PCI Interrupt Routing Table [\_SB_.C03E._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.C03E.C03F._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.C03E.C052._PRT]
ACPI: Power Resource [C14E] (on)
ACPI: Power Resource [C167] (on)
ACPI: Power Resource [C16B] (on)
ACPI: Power Resource [C174] (on)
ACPI: PCI Interrupt Link [C0BA] (IRQs 5 10 *11)
ACPI: PCI Interrupt Link [C0BB] (IRQs 5 10 *11)
ACPI: PCI Interrupt Link [C0BC] (IRQs 5 10 *11)
ACPI: PCI Interrupt Link [C0BD] (IRQs 5 10 *11)
ACPI: PCI Interrupt Link [C0BE] (IRQs 5 10 *11)
ACPI: PCI Interrupt Link [C0BF] (IRQs 5 10 *11)
ACPI: PCI Interrupt Link [C0C0] (IRQs 5 10 *11)
ACPI: PCI Interrupt Link [C0C1] (IRQs 5 10 11) *0, disabled.
ACPI: Power Resource [C1F3] (off)
ACPI: Power Resource [C1F4] (off)
ACPI: Power Resource [C1F5] (off)
Linux Plug and Play Support v0.97 (c) Adam Belay
pnp: PnP ACPI init
pnp: PnP ACPI: found 14 devices
PnPBIOS: Disabled by ACPI PNP
SCSI subsystem initialized
PCI: Using ACPI for IRQ routing
PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report
pnp: 00:0b: ioport range 0x140-0x14f has been reserved
pnp: 00:0c: ioport range 0x4d0-0x4d1 has been reserved
pnp: 00:0c: ioport range 0x1000-0x1087 could not be reserved
pnp: 00:0c: ioport range 0x1100-0x113f has been reserved
pnp: 00:0c: ioport range 0x1200-0x121f has been reserved
Machine check exception polling timer started.
apm: BIOS version 1.2 Flags 0x03 (Driver version 1.16ac)
apm: overridden by ACPI.
devfs: 2004-01-31 Richard Gooch ([email protected])
devfs: boot_options: 0x0
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
fakephp: Fake PCI Hot Plug Controller Driver
cpqphp: Compaq Hot Plug PCI Controller Driver version: 0.9.8
ACPI: PCI Interrupt Link [C0BB] enabled at IRQ 11
PCI: setting IRQ 11 as level-triggered
ACPI: PCI interrupt 0000:01:00.0[A] -> GSI 11 (level, low) -> IRQ 11
radeonfb: Retreived PLL infos from BIOS
radeonfb: Reference=27.00 MHz (RefDiv=60) Memory=166.00 Mhz, System=166.00 MHz
radeonfb: PLL min 12000 max 35000
Non-DDC laptop panel detected
radeonfb: Monitor 1 type LCD found
radeonfb: Monitor 2 type no found
radeonfb: panel ID string: 1024x768
radeonfb: detected LVDS panel size from BIOS: 1024x768
radeondb: BIOS provided dividers will be used
Console: switching to colour frame buffer device 128x48
radeonfb: Dynamic Clock Power Management enabled
radeonfb (0000:01:00.0): ATI Radeon LY
ACPI: AC Adapter [C1A2] (on-line)
ACPI: Battery Slot [C19F] (battery present)
ACPI: Battery Slot [C1A0] (battery absent)
ACPI: Power Button (FF) [PWRF]
ACPI: Sleep Button (CM) [C1A3]
ACPI: Lid Switch [C1A4]
ACPI: Fan [C1F6] (off)
ACPI: Fan [C1F7] (off)
ACPI: Fan [C1F8] (off)
ACPI: CPU0 (power states: C1[C1] C2[C2] C3[C3])
ACPI: Thermal Zone [TZ1] (43 C)
inotify device minor=63
Linux agpgart interface v0.101 (c) Dave Jones
agpgart: Detected an Intel 830M Chipset.
agpgart: AGP aperture is 256M @ 0x60000000
[drm] Initialized drm 1.0.0 20040925
ACPI: PCI interrupt 0000:01:00.0[A] -> GSI 11 (level, low) -> IRQ 11
[drm] Initialized radeon 1.14.0 20050125 on minor 0: ATI Technologies Inc Radeon Mobility M6 LY
PNP: PS/2 Keyboard Controller [PNP0303,C171] at 0x60,0x64 irq 1
PNP: PS/2 Mouse Controller [PNP0f13,C172] irq 12
i8042.c: Detected active multiplexing controller, rev 1.1.
serio: i8042 AUX0 port at 0x60,0x64 irq 12
serio: i8042 AUX1 port at 0x60,0x64 irq 12
serio: i8042 AUX2 port at 0x60,0x64 irq 12
serio: i8042 AUX3 port at 0x60,0x64 irq 12
serio: i8042 KBD port at 0x60,0x64 irq 1
Serial: 8250/16550 driver $Revision: 1.90 $ 8 ports, IRQ sharing disabled
ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
ttyS2 at I/O 0x3e8 (irq = 4) is a 16550A
ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
io scheduler noop registered
io scheduler anticipatory registered
io scheduler deadline registered
io scheduler cfq registered
e100: Intel(R) PRO/100 Network Driver, 3.3.6-k2-NAPI
e100: Copyright(c) 1999-2004 Intel Corporation
ACPI: PCI Interrupt Link [C0BE] enabled at IRQ 11
ACPI: PCI interrupt 0000:02:08.0[A] -> GSI 11 (level, low) -> IRQ 11
e100: eth0: e100_probe: addr 0x40100000, irq 0, MAC addr 0B:00:02:A5:B5:03
Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
ICH3M: IDE controller at PCI slot 0000:00:1f.1
PCI: Enabling device 0000:00:1f.1 (0005 -> 0007)
ACPI: PCI Interrupt Link [C0BC] enabled at IRQ 11
ACPI: PCI interrupt 0000:00:1f.1[A] -> GSI 11 (level, low) -> IRQ 11
ICH3M: chipset revision 1
ICH3M: not 100% native mode: will probe irqs later

    ide0: BM-DMA at 0x4060-0x4067, BIOS settings: hda:DMA, hdb:pio
    ide1: BM-DMA at 0x4068-0x406f, BIOS settings: hdc:DMA, hdd:pio

Probing IDE interface ide0...
hda: IC25N020ATDA04-0, ATA DISK drive
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
Probing IDE interface ide1...
hdc: Compaq DVD-ROM SD-C2402, ATAPI CD/DVD-ROM drive
ide1 at 0x170-0x177,0x376 on irq 15
ide2: I/O resource 0x3EE-0x3EE not free.
ide2: ports already in use, skipping probe
Probing IDE interface ide3...
Probing IDE interface ide4...
Probing IDE interface ide5...
hda: max request size: 128KiB
hda: 39070080 sectors (20003 MB) w/1806KiB Cache, CHS=38760/16/63, UDMA(100)
hda: cache flushes not supported
/dev/ide/host0/bus0/target0/lun0: p1 p2 p3 p4
hdc: ATAPI 24X DVD-ROM drive, 128kB Cache, DMA
Uniform CD-ROM driver Revision: 3.20
mice: PS/2 mouse device common for all mice
NET: Registered protocol family 2
IP: routing cache hash table of 8192 buckets, 64Kbytes
TCP established hash table entries: 131072 (order: 8, 1048576 bytes) TCP bind hash table entries: 65536 (order: 6, 262144 bytes)
TCP: Hash tables configured (established 131072 bind 65536)
NET: Registered protocol family 1
NET: Registered protocol family 17
PM: Reading swsusp image.
swsusp: Resume From Partition: /dev/hda4
input: AT Translated Set 2 keyboard on isa0060/serio0
<3>swsusp: Suspend partition has wrong signature?
swsusp: Error -22 resuming
PM: Resume from disk failed.
ACPI wakeup devices:
C052 C17E C185 C0A4 C0AA C19F C1A0 C1A3 C1A4
ACPI: (supports S0 S1 S3 S4 S4bios S5)
EXT3-fs: INFO: recovery required on readonly filesystem.
EXT3-fs: write access will be enabled during recovery.
Synaptics Touchpad, model: 1
Firmware: 5.8
180 degree mounted touchpad
Sensor: 27
new absolute packet format
Touchpad has extended capability bits
-> multifinger detection
-> palm detection
-> pass-through port
serio: Synaptics pass-through port at isa0060/serio4/input0
input: SynPS/2 Synaptics TouchPad on isa0060/serio4
EXT3-fs: hda2: orphan cleanup on readonly fs
ext3_orphan_cleanup: deleting unreferenced inode 531493
ext3_orphan_cleanup: deleting unreferenced inode 531356
ext3_orphan_cleanup: deleting unreferenced inode 531211
ext3_orphan_cleanup: deleting unreferenced inode 531208
EXT3-fs: hda2: 4 orphan inodes deleted
EXT3-fs: recovery complete.
kjournald starting. Commit interval 5 seconds
EXT3-fs: mounted filesystem with ordered data mode.
VFS: Mounted root (ext3 filesystem) readonly.
Freeing unused kernel memory: 184k freed
input: PS/2 Generic Mouse on synaptics-pt/serio0
Adding 665272k swap on /dev/hda4. Priority:-1 extents:1
EXT3 FS on hda2, internal journal
device-mapper: 4.4.0-ioctl (2005-01-12) initialised: [email protected] kjournald starting. Commit interval 5 seconds
EXT3 FS on hda3, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
ACPI: PCI Interrupt Link [C0BA] enabled at IRQ 11
ACPI: PCI interrupt 0000:02:09.0[A] -> GSI 11 (level, low) -> IRQ 11 Linux Kernel Card Services
options: [pci] [cardbus] [pm]
ACPI: PCI Interrupt Link [C0C0] enabled at IRQ 11
ACPI: PCI interrupt 0000:02:03.0[A] -> GSI 11 (level, low) -> IRQ 11
Yenta: CardBus bridge found at 0000:02:03.0 [0e11:004e]
yenta 0000:02:03.0: no resource of type 100 available, trying to continue... yenta 0000:02:03.0: no resource of type 100 available, trying to continue...
Yenta: Enabling burst memory read transactions
Yenta: Using CSCINT to route CSC interrupts to PCI
Yenta: Routing CardBus interrupts to PCI
Yenta TI: socket 0000:02:03.0, mfunc 0x01001002, devctl 0x64
Yenta: ISA IRQ mask 0x04f8, PCI irq 11
Socket status: 30000006
ACPI: PCI interrupt 0000:02:03.1[A] -> GSI 11 (level, low) -> IRQ 11
Yenta: CardBus bridge found at 0000:02:03.1 [0e11:004e]
yenta 0000:02:03.1: no resource of type 100 available, trying to continue... yenta 0000:02:03.1: no resource of type 100 available, trying to continue...
Yenta: Using CSCINT to route CSC interrupts to PCI
Yenta: Routing CardBus interrupts to PCI
Yenta TI: socket 0000:02:03.1, mfunc 0x01001002, devctl 0x64
Yenta: ISA IRQ mask 0x04f8, PCI irq 11
Socket status: 30000006
irda_init()
NET: Registered protocol family 23
parport: PnPBIOS parport detected.
parport0: PC-style at 0x378, irq 7 [PCSPP(,...)]
input: PC Speaker
Real Time Clock Driver v1.12
usbcore: registered new driver usbfs
usbcore: registered new driver hub
USB Universal Host Controller Interface driver v2.2
ACPI: PCI interrupt 0000:00:1d.0[A] -> GSI 11 (level, low) -> IRQ 11
PCI: Setting latency timer of device 0000:00:1d.0 to 64
uhci_hcd 0000:00:1d.0: Intel Corporation 82801CA/CAM USB (Hub #1) uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 1 uhci_hcd 0000:00:1d.0: irq 11, io base 0x00004000
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 2 ports detected
ACPI: PCI Interrupt Link [C0BD] enabled at IRQ 11
ACPI: PCI interrupt 0000:00:1d.1[B] -> GSI 11 (level, low) -> IRQ 11
PCI: Setting latency timer of device 0000:00:1d.1 to 64
uhci_hcd 0000:00:1d.1: Intel Corporation 82801CA/CAM USB (Hub #2) uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 2 uhci_hcd 0000:00:1d.1: irq 11, io base 0x00004020
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 2 ports detected
ACPI: PCI interrupt 0000:00:1d.2[C] -> GSI 11 (level, low) -> IRQ 11
PCI: Setting latency timer of device 0000:00:1d.2 to 64
uhci_hcd 0000:00:1d.2: Intel Corporation 82801CA/CAM USB (Hub #3) uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 3 uhci_hcd 0000:00:1d.2: irq 11, io base 0x00004040
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 2 ports detected
hw_random hardware driver 1.0.0 loaded
cs: IO port probe 0x100-0x4ff: excluding 0x100-0x107 0x200-0x207
cs: IO port probe 0x100-0x4ff: excluding 0x100-0x107 0x200-0x207
cs: IO port probe 0x800-0x8ff: clean.
cs: IO port probe 0x800-0x8ff: clean.
cs: IO port probe 0xc00-0xcff: clean.
cs: IO port probe 0xc00-0xcff: clean.
cs: IO port probe 0xa00-0xaff: clean.
cs: IO port probe 0xa00-0xaff: clean.
agpgart: Found an AGP 2.0 compliant device at 0000:00:00.0.
agpgart: XFree86 tried to set rate=x7. Setting to x4 mode.
agpgart: Putting AGP V2 device at 0000:00:00.0 into 4x mode
agpgart: Putting AGP V2 device at 0000:01:00.0 into 4x mode

Module                  Size  Used by
pcmcia                 19304  4 
hw_random               4468  0 
uhci_hcd               30352  0 
rtc                    10872  0 
pcspkr                  3236  0 
parport_pc             22660  0 
parport                20992  1 parport_pc
irtty_sir               7616  0 
sir_dev                15724  1 irtty_sir
irda                  188028  2 irtty_sir,sir_dev
crc_ccitt               1696  1 irda
yenta_socket           20008  2 
rsrc_nonstatic          9120  1 yenta_socket
pcmcia_core            42592  3 pcmcia,yenta_socket,rsrc_nonstatic
snd_maestro3           20772  0 
snd_ac97_codec         75192  1 snd_maestro3
snd_pcm_oss            49024  0 
snd_mixer_oss          17824  1 snd_pcm_oss
snd_pcm                84776  3 snd_maestro3,snd_ac97_codec,snd_pcm_oss
snd_timer              21924  1 snd_pcm
snd_page_alloc          7620  1 snd_pcm
snd                    48356  6 snd_maestro3,snd_ac97_codec,snd_pcm_oss,snd_mixer_oss,snd_pcm,snd_timer
soundcore               7712  1 snd
nls_iso8859_15          4288  1 
nls_cp850               4544  1 
vfat                   11360  1 
fat                    36092  1 vfat
nls_base                6432  4 nls_iso8859_15,nls_cp850,vfat,fat
dm_mod                 53244  0 
spca50x               288088  0 
usbcore               110872  3 uhci_hcd,spca50x
videodev                7616  1 spca50x
Module                  Size  Used by
pcmcia                 22056  5 
hw_random               4404  0 
uhci_hcd               30320  0 
usbcore               112440  2 uhci_hcd
rtc                    11096  0 
pcspkr                  3236  0 
parport_pc             22788  0 
parport                21248  1 parport_pc
irtty_sir               7552  0 
sir_dev                16236  1 irtty_sir
irda                  190236  2 irtty_sir,sir_dev
crc_ccitt               1696  1 irda
yenta_socket           20392  3 
rsrc_nonstatic         11488  1 yenta_socket
pcmcia_core            43972  3 pcmcia,yenta_socket,rsrc_nonstatic
snd_maestro3           20804  0 
snd_ac97_codec         75736  1 snd_maestro3
snd_pcm_oss            48320  0 
snd_mixer_oss          17248  1 snd_pcm_oss
snd_pcm                84648  3 snd_maestro3,snd_ac97_codec,snd_pcm_oss
snd_timer              21956  1 snd_pcm
snd_page_alloc          7748  1 snd_pcm
snd                    48068  6 snd_maestro3,snd_ac97_codec,snd_pcm_oss,snd_mixer_oss,snd_pcm,snd_timer
soundcore               7712  1 snd
nls_iso8859_15          4288  1 
nls_cp850               4544  1 
vfat                   11360  1 
fat                    35644  1 vfat
nls_base                6432  4 nls_iso8859_15,nls_cp850,vfat,fat
dm_mod                 52508  0 
0000:00:00.0 Host bridge: Intel Corp. 82830 830 Chipset Host Bridge (rev 02)
	Subsystem: Compaq Computer Corporation: Unknown device 0030
	Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ >SERR- <PERR-
	Latency: 0
	Region 0: Memory at 60000000 (32-bit, prefetchable) [size=256M]
	Capabilities: [40] #09 [0105]
	Capabilities: [a0] AGP version 2.0
		Status: RQ=32 Iso- ArqSz=0 Cal=0 SBA+ ITACoh- GART64- HTrans- 64bit- FW+ AGP3- Rate=x1,x2,x4
		Command: RQ=1 ArqSz=0 Cal=0 SBA+ AGP+ GART64- 64bit- FW- Rate=x4

0000:00:01.0 PCI bridge: Intel Corp. 82830 830 Chipset AGP Bridge (rev 02) (prog-if 00 [Normal decode])

	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
	Status: Cap- 66MHz+ UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-
	Latency: 64
	Bus: primary=00, secondary=01, subordinate=01, sec-latency=0
	I/O behind bridge: 00003000-00003fff
	Memory behind bridge: 40200000-402fffff
	Prefetchable memory behind bridge: 48000000-4fffffff
	BridgeCtl: Parity- SERR- NoISA+ VGA+ MAbort- >Reset- FastB2B-

0000:00:1d.0 USB Controller: Intel Corp. 82801CA/CAM USB (Hub #1) (rev 01) (prog-if 00 [UHCI])
Subsystem: Compaq Computer Corporation: Unknown device 0030
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 0
Interrupt: pin A routed to IRQ 11
Region 4: I/O ports at 4000 [size=32]

0000:00:1d.1 USB Controller: Intel Corp. 82801CA/CAM USB (Hub #2) (rev 01) (prog-if 00 [UHCI])
Subsystem: Compaq Computer Corporation: Unknown device 0030
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 0
Interrupt: pin B routed to IRQ 11
Region 4: I/O ports at 4020 [size=32]

0000:00:1d.2 USB Controller: Intel Corp. 82801CA/CAM USB (Hub #3) (rev 01) (prog-if 00 [UHCI])
Subsystem: Compaq Computer Corporation: Unknown device 0030
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 0
Interrupt: pin C routed to IRQ 11
Region 4: I/O ports at 4040 [size=32]

0000:00:1e.0 PCI bridge: Intel Corp. 82801 Mobile PCI Bridge (rev 41) (prog-if 00 [Normal decode])

	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
	Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-
	Latency: 0
	Bus: primary=00, secondary=02, subordinate=04, sec-latency=32
	I/O behind bridge: 00002000-00002fff
	Memory behind bridge: 40000000-401fffff
	BridgeCtl: Parity- SERR+ NoISA+ VGA- MAbort- >Reset- FastB2B-

0000:00:1f.0 ISA bridge: Intel Corp. 82801CAM ISA Bridge (LPC) (rev 01)
Control: I/O+ Mem+ BusMaster+ SpecCycle+ MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 0

0000:00:1f.1 IDE interface: Intel Corp. 82801CAM IDE U100 (rev 01) (prog-if 8a [Master SecP PriP])
Subsystem: Compaq Computer Corporation: Unknown device 0030
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 0
Interrupt: pin A routed to IRQ 11
Region 0: I/O ports at <unassigned>
Region 1: I/O ports at <unassigned>
Region 2: I/O ports at <unassigned>
Region 3: I/O ports at <unassigned>
Region 4: I/O ports at 4060 [size=16]
Region 5: Memory at 28000000 (32-bit, non-prefetchable) [size=1K]

0000:01:00.0 VGA compatible controller: ATI Technologies Inc Radeon Mobility M6 LY (prog-if 00 [VGA])
Subsystem: Compaq Computer Corporation: Unknown device b111
Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping+ SERR- FastB2B-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Interrupt: pin A routed to IRQ 11
Region 0: Memory at 48000000 (32-bit, prefetchable) [size=128M]
Region 1: I/O ports at 3000 [size=256]
Region 2: Memory at 40200000 (32-bit, non-prefetchable) [size=64K]
Capabilities: [58] AGP version 2.0
Status: RQ=48 Iso- ArqSz=0 Cal=0 SBA+ ITACoh- GART64- HTrans- 64bit- FW- AGP3- Rate=x1,x2,x4
Command: RQ=32 ArqSz=0 Cal=0 SBA+ AGP+ GART64- 64bit- FW- Rate=x4
Capabilities: [50] Power Management version 2
Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-

0000:02:03.0 CardBus bridge: Texas Instruments PCI1420

	Subsystem: Compaq Computer Corporation: Unknown device 004e
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
	Latency: 168, Cache Line Size: 0x08 (32 bytes)
	Interrupt: pin A routed to IRQ 11
	Region 0: Memory at 40000000 (32-bit, non-prefetchable) [size=4K]
	Bus: primary=02, secondary=03, subordinate=06, sec-latency=176
	Memory window 0: 28400000-287ff000 (prefetchable)
	Memory window 1: 40040000-4007f000
	I/O window 0: 00000000-00000003
	I/O window 1: 00000000-00000003
	BridgeCtl: Parity- SERR- ISA- VGA- MAbort- >Reset+ 16bInt+ PostWrite+
	16-bit legacy interface ports at 0001

0000:02:03.1 CardBus bridge: Texas Instruments PCI1420

	Subsystem: Compaq Computer Corporation: Unknown device 004e
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
	Latency: 168, Cache Line Size: 0x08 (32 bytes)
	Interrupt: pin A routed to IRQ 11
	Region 0: Memory at 40080000 (32-bit, non-prefetchable) [size=4K]
	Bus: primary=02, secondary=07, subordinate=0a, sec-latency=176
	Memory window 0: 28800000-28bff000 (prefetchable)
	Memory window 1: 400c0000-400ff000
	I/O window 0: 00000000-00000003
	I/O window 1: 00000000-00000003
	BridgeCtl: Parity- SERR- ISA- VGA- MAbort- >Reset+ 16bInt+ PostWrite+
	16-bit legacy interface ports at 0001

0000:02:04.0 Communication controller: Agere Systems (former Lucent Microelectronics) LT WinModem (rev 02)
Subsystem: AMBIT Microsystem Corp.: Unknown device 0450
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 66 (63000ns min, 3500ns max)
Interrupt: pin A routed to IRQ 11
Region 0: Memory at 40180000 (32-bit, non-prefetchable) [size=256]
Region 1: I/O ports at 2840 [size=8]
Region 2: I/O ports at 2000 [size=256]
Capabilities: [f8] Power Management version 2
Flags: PMEClk- DSI+ D1- D2+ AuxCurrent=160mA PME(D0-,D1-,D2+,D3hot+,D3cold+)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-

0000:02:08.0 Ethernet controller: Intel Corp. 82801CAM (ICH3) PRO/100 VM (KM) Ethernet Controller (rev 41)
Subsystem: Compaq Computer Corporation: Unknown device 0098
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 66 (2000ns min, 14000ns max), Cache Line Size: 0x08 (32 bytes)
Interrupt: pin A routed to IRQ 11
Region 0: Memory at 40100000 (32-bit, non-prefetchable) [size=4K]
Region 1: I/O ports at 2800 [size=64]
Capabilities: [dc] Power Management version 2
Flags: PMEClk- DSI+ D1+ D2+ AuxCurrent=0mA PME(D0+,D1+,D2+,D3hot+,D3cold+)
Status: D0 PME-Enable+ DSel=0 DScale=2 PME-

0000:02:09.0 Multimedia audio controller: ESS Technology ES1988 Allegro-1 (rev 12)
Subsystem: Compaq Computer Corporation: Unknown device 0094
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 64 (500ns min, 6000ns max)
Interrupt: pin A routed to IRQ 11
Region 0: I/O ports at 2400 [size=256]
Capabilities: [c0] Power Management version 2
Flags: PMEClk- DSI+ D1+ D2+ AuxCurrent=0mA PME(D0-,D1+,D2+,D3hot+,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-

#35 lore raw

Hi,

Quoted 7 lines · Brice Goglin
Quoted 1 line · Andrew Morton

ftp://ftp.kernel.org/pub/linux/kernel/people/akpm/patches/2.6/2.6.11-rc4/2.6.11-rc4-mm1/

I can't get PCMCIA to work anymore since rc4-mm1.
It was working great with rc4 and rc3-mm1.

PCMCIA loads without any apparent problem (see attached dmesg).

One thing surprises me: the sockets don't get IO resources allocated:

Quoted 2 lines

yenta 0000:02:03.1: no resource of type 100 available, trying to continue... yenta 0000:02:03.1: no resource of type 100 available, trying to continue...

which doesn't happen in earlier kernels. In lspci this shows itself as:

        I/O window 0: 00000000-00000003                                         
        I/O window 1: 00000000-00000003                                         
Quoted 1 line

Which one(s) do you think might be responsible for this ?

My gut tells me

Quoted 1 line
Quoted 1 line

+pcmcia-bridge-resource-management-fix.patch

is responsible for this "no resource available" message, because the other ones relate to other areas.

If the error persists, it'd be great if you could apply the other PCMCIA patches to the working -rc4 tree and check if it continues to work -- or, the other way round, removing the PCMCIA patches completely and checking whether it works then.

Thanks,
Dominik

#36 lore raw
Quoted 4 lines · Dominik Brodowski
Quoted 1 line
Quoted 1 line

+pcmcia-bridge-resource-management-fix.patch

is responsible for this "no resource available" message, because the other ones relate to other areas.

Yes, good catch, reverting it makes PCMCIA work again. Let me know if you want me to test some patches.

Thanks,
Brice

#37 lore raw
In reply to Dominik Brodowski
Quoted 4 lines · Dominik Brodowski
Quoted 1 line
Quoted 1 line

+pcmcia-bridge-resource-management-fix.patch

is responsible for this "no resource available" message, because the other ones relate to other areas.

This line from dmesg-2.6.11-rc4 is no longer present in -rc4-mm1:
PCI: Transparent bridge - 0000:00:1e.0

This is probably due to this patch too, right ?
Was it supposed to changed that ?

lspci -tv says that the PCMCIA bridge whose resources are broken is behind this no-longer transparent bridge.

-[00]-+-00.0 Intel Corp. 82830 830 Chipset Host Bridge

      +-01.0-[01]----00.0  ATI Technologies Inc Radeon Mobility M6 LY
      +-1d.0  Intel Corp. 82801CA/CAM USB (Hub #1)
      +-1d.1  Intel Corp. 82801CA/CAM USB (Hub #2)
      +-1d.2  Intel Corp. 82801CA/CAM USB (Hub #3)
      +-1e.0-[02-04]--+-03.0  Texas Instruments PCI1420
      |               +-03.1  Texas Instruments PCI1420
      |               +-04.0  Agere Systems (former Lucent Microelectronics) LT WinModem
      |               +-08.0  Intel Corp. 82801CAM (ICH3) PRO/100 VM (KM) Ethernet Controller
      |               \-09.0  ESS Technology ES1988 Allegro-1
      +-1f.0  Intel Corp. 82801CAM ISA Bridge (LPC)
      \-1f.1  Intel Corp. 82801CAM IDE U100

Hope this helps.

Brice

#38 lore raw
In reply to Andrew Morton
Quoted 12 lines · Andrew Morton

ftp://ftp.kernel.org/pub/linux/kernel/people/akpm/patches/2.6/2.6.11-rc4/2.6.11-rc4-mm1/

- Various fixes and updates all over the place. Things seem to have slowed down a bit.

- Last, final, ultimate call: if anyone has patches in here which are 2.6.11 material, please tell me.

Quoted 8 lines

Changes since 2.6.11-rc3-mm1:

make-itimer_real-per-process.patch
make ITIMER_REAL per-process

make-itimer_prof-itimer_virtual-per-process.patch
make ITIMER_PROF, ITIMER_VIRTUAL per-process

gcc-4.0 warns with reasons on this patches:

kernel/itimer.c: In function ‘do_getitimer’:
kernel/itimer.c:61: warning: ‘val’ is used uninitialized in this function

kernel/itimer.c +2 -2
@@ -58,7 +58,7 @@ int do_getitimer(int which, struct itime
 			if (cputime_le(cval, utime)) { /* about to fire */
 				val = jiffies_to_cputime(1);
 			} else {
-				val = cputime_sub(val, utime);
+				val = cputime_sub(cval, utime);
 			}
 		}
 		spin_unlock_irq(&tsk->sighand->siglock);
@@ -84,7 +84,7 @@ int do_getitimer(int which, struct itime
 			if (cputime_le(cval, ptime)) { /* about to fire */
 				val = jiffies_to_cputime(1);
 			} else {
-				val = cputime_sub(val, ptime);
+				val = cputime_sub(cval, ptime);
 			}
 		}
 		spin_unlock_irq(&tsk->sighand->siglock);
#39 lore raw

PATCH 1/1 process-wide itimer typo fixes

Thanks for finding that.

Ack! I did a quick merge of my well-tested patches with the cputime_t stuff, and apparently didn't do quite as much testing as I thought I did. There was a little query/replace error in my per-process-itimer-cpu patch now in -mm. Your patch is necessary but not sufficient. This patch fixes all the errors.

Thanks,
Roland

kernel/itimer.c +4 -4
@@ -56,9 +56,9 @@ int do_getitimer(int which, struct itime
 				t = next_thread(t);
 			} while (t != tsk);
 			if (cputime_le(cval, utime)) { /* about to fire */
-				val = jiffies_to_cputime(1);
+				cval = jiffies_to_cputime(1);
 			} else {
-				val = cputime_sub(val, utime);
+				cval = cputime_sub(cval, utime);
 			}
 		}
 		spin_unlock_irq(&tsk->sighand->siglock);
@@ -82,9 +82,9 @@ int do_getitimer(int which, struct itime
 				t = next_thread(t);
 			} while (t != tsk);
 			if (cputime_le(cval, ptime)) { /* about to fire */
-				val = jiffies_to_cputime(1);
+				cval = jiffies_to_cputime(1);
 			} else {
-				val = cputime_sub(val, ptime);
+				cval = cputime_sub(cval, ptime);
 			}
 		}
 		spin_unlock_irq(&tsk->sighand->siglock);
#40 lore raw
In reply to Andrew Morton
Quoted 5 lines · Andrew Morton

...
Changes since 2.6.11-rc3-mm1:
...
bk-kbuild.patch
...

This adds -Wno-pointer-sign to the main Makefile a second time.

cu
Adrian

Signature · 4 lines
       "Is there not promise of rain?" Ling Tan asked suddenly out
        of the darkness. There had been need of rain for many days.
       "Only a promise," Lao Er said.
                                       Pearl S. Buck - Dragon Seed
#41 lore raw

Re: 2.6.11-rc4-mm1 (compile stats)

In reply to Andrew Morton

Linux 2.6 (mm tree) Compile Statistics (gcc 3.4.1)

Web page with links to complete details:
http://developer.osdl.org/cherry/compile/

Kernel bzImage bzImage bzImage modules bzImage modules
(defconfig) (allno) (allyes) (allyes) (allmod) (allmod)
--------------- ---------- -------- -------- -------- -------- --------

2.6.11-rc4-mm1   22w/0e     0w/0e   271w/0e   10w/0e  25w/0e    249w/0e
2.6.11-rc3-mm2   14w/0e     0w/0e   192w/0e    6w/0e  19w/0e    172w/0e
2.6.11-rc3-mm1   13w/10e    0w/7e   196w/12e   6w/0e  18w/12e   177w/0e
2.6.11-rc2-mm2   15w/0e     0w/0e   201w/0e    6w/0e  18w/0e    182w/0e
2.6.11-rc2-mm1   15w/0e     0w/0e   306w/14e   6w/0e  18w/0e    294w/0e
2.6.11-rc1-mm2   21w/0e     0w/0e   316w/9e    6w/0e  22w/0e    294w/0e
2.6.11-rc1-mm1   21w/0e     0w/0e   319w/0e    6w/0e  23w/0e    298w/0e
2.6.10-mm3       21w/0e     0w/0e   320w/0e    6w/0e  23w/0e    299w/0e
2.6.10-mm2       21w/0e     0w/0e   440w/0e    6w/0e  23w/0e    420w/0e
2.6.10-mm1       12w/0e     0w/0e   414w/0e    6w/0e  17w/0e    399w/0e
2.6.10-rc3-mm1   12w/0e     0w/0e   414w/0e    6w/0e  16w/0e    401w/0e
2.6.10-rc2-mm4   15w/0e     1w/7e   421w/0e    6w/0e  16w/0e    408w/0e
2.6.10-rc2-mm3   15w/0e     0w/0e  1255w/12e  66w/0e  16w/0e   1507w/0e
2.6.10-rc2-mm2   15w/0e     0w/0e  1362w/15e  65w/0e  16w/0e   1612w/2e
2.6.10-rc2-mm1   15w/0e     0w/0e  1405w/11e  65w/0e  16w/0e   1652w/0e
2.6.10-rc1-mm5   16w/0e     0w/0e  1587w/0e   65w/0e  20w/0e   1834w/0e
2.6.10-rc1-mm4   16w/0e     0w/0e  1485w/9e   65w/0e  20w/0e   1732w/0e
(Compiles with gcc 3.2.2)
2.6.10-rc1-mm3    7w/31e    0w/9e   496w/141e  4w/0e   4w/50e   693w/83e
2.6.10-rc1-mm2   16w/1e     1w/1e   529w/1e    4w/0e  12w/1e    729w/0e
2.6.10-mm1       12w/0e     0w/0e   414w/0e    6w/0e  17w/0e    399w/0e
2.6.10-rc3-mm1   12w/0e     0w/0e   414w/0e    6w/0e  16w/0e    401w/0e
2.6.10-rc2-mm4   15w/0e     1w/7e   421w/0e    6w/0e  16w/0e    408w/0e
2.6.10-rc2-mm3   15w/0e     0w/0e  1255w/12e  66w/0e  16w/0e   1507w/0e
2.6.10-rc2-mm2   15w/0e     0w/0e  1362w/15e  65w/0e  16w/0e   1612w/2e
2.6.10-rc2-mm1   15w/0e     0w/0e  1405w/11e  65w/0e  16w/0e   1652w/0e
2.6.10-rc1-mm5   16w/0e     0w/0e  1587w/0e   65w/0e  20w/0e   1834w/0e
2.6.10-rc1-mm4   16w/0e     0w/0e  1485w/9e   65w/0e  20w/0e   1732w/0e
(Compiles with gcc 3.2.2)
2.6.10-rc1-mm3    7w/31e    0w/9e   496w/141e  4w/0e   4w/50e   693w/83e
2.6.10-rc1-mm2   16w/1e     1w/1e   529w/1e    4w/0e  12w/1e    729w/0e
2.6.10-rc1-mm1   16w/1e     1w/1e   592w/1e    4w/0e  13w/1e    857w/0e
2.6.9-mm1         6w/1e     1w/1e  1761w/15e  65w/0e   9w/0e   2086w/0e
2.6.9-rc4-mm1     5w/0e     0w/0e  1766w/11e  43w/0e   6w/0e   1798w/0e
2.6.9-rc3-mm3     5w/0e     0w/0e  1756w/11e  43w/0e   4w/0e   1786w/0e
2.6.9-rc3-mm2    10w/0e     4w/9e  1754w/14e  43w/0e   4w/0e   1782w/1e
2.6.9-rc3-mm1    10w/0e     4w/10e 1768w/0e   43w/0e   4w/0e   1796w/0e
2.6.9-rc2-mm4    10w/0e     5w/0e  2573w/0e   41w/0e   4w/0e   2600w/0e
2.6.9-rc2-mm3    10w/0e     5w/0e  2400w/0e   41w/0e   4w/0e   2435w/0e
2.6.9-rc2-mm2    10w/0e     5w/0e  2919w/0e   41w/0e   4w/0e   2954w/0e
2.6.9-rc2-mm1     0w/0e     2w/0e  3541w/9e   41w/0e   3w/9e   3567w/0e
2.6.9-rc1-mm4     0w/0e     1w/0e    55w/0e    3w/0e   2w/0e     48w/0e
2.6.9-rc1-mm3     0w/0e     0w/0e    55w/13e   3w/0e   1w/0e     49w/1e
2.6.9-rc1-mm2     0w/0e     0w/0e    53w/11e   3w/0e   1w/0e     47w/0e
2.6.9-rc1-mm1     0w/0e     0w/0e    80w/0e    4w/0e   1w/0e     74w/0e
2.6.8.1-mm4       0w/0e     0w/0e    78w/0e    4w/0e   1w/0e     73w/0e
2.6.8.1-mm3       0w/96e    0w/0e    78w/97e   4w/0e   1w/0e     74w/89e
2.6.8.1-mm2       0w/96e    0w/0e    78w/97e   4w/0e   1w/0e     74w/89e
2.6.8.1-mm1       0w/0e     0w/0e    78w/0e    4w/0e   1w/0e     74w/0e
2.6.8-rc4-mm1     0w/0e     0w/5e    81w/0e    4w/0e   1w/0e     75w/0e
2.6.8-rc3-mm2     1w/7e     0w/5e    82w/8e    4w/0e   2w/8e     75w/0e
2.6.8-rc3-mm1     0w/0e     1w/5e    81w/9e    4w/0e   1w/0e     75w/0e
2.6.8-rc2-mm2     0w/0e     4w/5e    87w/9e    4w/0e   1w/0e     80w/0e
2.6.8-rc2-mm1     0w/0e     0w/0e    83w/9e    3w/0e   1w/0e     81w/0e
2.6.8-rc1-mm1     0w/0e     0w/0e    88w/9e    5w/0e   1w/0e     87w/0e
2.6.7-mm7         0w/0e     0w/0e    89w/9e    5w/0e   1w/0e     84w/0e
2.6.7-mm6         0w/0e     0w/0e    85w/9e    5w/0e   1w/0e     80w/0e
2.6.7-mm5         0w/0e     0w/0e    92w/0e    5w/0e   1w/0e     87w/0e
2.6.7-mm4         0w/0e     0w/0e    94w/0e    5w/0e   1w/0e     89w/0e
2.6.7-mm3         0w/0e     0w/0e    90w/6e    5w/0e   1w/0e     86w/0e
2.6.7-mm2         0w/0e     0w/0e   109w/0e    7w/0e   1w/0e    106w/0e
2.6.7-mm1         0w/0e     5w/0e   108w/0e    5w/0e   1w/0e    104w/0e
2.6.7-rc3-mm2     0w/0e     5w/0e   105w/10e   5w/0e   2w/0e    100w/2e
2.6.7-rc3-mm1     0w/0e     5w/0e   104w/10e   5w/0e   2w/0e    100w/2e
2.6.7-rc2-mm2     0w/0e     5w/0e   109w/10e   5w/0e   2w/0e    105w/2e
2.6.7-rc2-mm1     0w/0e    12w/0e   158w/13e   5w/0e   3w/0e    153w/4e
2.6.7-rc1-mm1     0w/0e     6w/0e   108w/0e    5w/0e   2w/0e    104w/0e
2.6.6-mm5         0w/0e     0w/0e   109w/5e    5w/0e   2w/0e    110w/0e
2.6.6-mm4         0w/0e     0w/0e   112w/9e    5w/0e   2w/5e    106w/1e
2.6.6-mm3         3w/9e     0w/0e   120w/26e   5w/0e   2w/0e    114w/10e
2.6.6-mm2         4w/11e    0w/0e   120w/24e   6w/0e   2w/0e    118w/9e
2.6.6-mm1         1w/0e     0w/0e   118w/25e   6w/0e   2w/0e    114w/10e
2.6.6-rc3-mm2     0w/0e     0w/0e   117w/ 0e   8w/0e   2w/0e    116w/0e
2.6.6-rc3-mm1     0w/0e     0w/0e   120w/10e   8w/0e   2w/0e    152w/2e
2.6.6-rc2-mm2     0w/0e     1w/5e   118w/ 0e   8w/0e   3w/0e    118w/0e
2.6.6-rc2-mm1     0w/0e     0w/0e   115w/ 0e   7w/0e   3w/0e    116w/0e
2.6.6-rc1-mm1     0w/0e     0w/7e   122w/ 0e   7w/0e   4w/0e    122w/0e
2.6.5-mm6         0w/0e     0w/0e   123w/ 0e   7w/0e   4w/0e    124w/0e
2.6.5-mm5         0w/0e     0w/0e   119w/ 0e   7w/0e   4w/0e    120w/0e
2.6.5-mm4         0w/0e     0w/0e   120w/ 0e   7w/0e   4w/0e    121w/0e
2.6.5-mm3         0w/0e     1w/0e   121w/12e   7w/0e   3w/0e    123w/0e
2.6.5-mm2         0w/0e     0w/0e   128w/12e   7w/0e   3w/0e    134w/0e
2.6.5-mm1         0w/0e     5w/0e   122w/ 0e   7w/0e   3w/0e    124w/0e
2.6.5-rc3-mm4     0w/0e     0w/0e   124w/ 0e   8w/0e   4w/0e    126w/0e
2.6.5-rc3-mm3     0w/0e     5w/0e   129w/14e   8w/0e   4w/0e    129w/6e
2.6.5-rc3-mm2     0w/0e     5w/0e   130w/14e   8w/0e   4w/0e    129w/6e
2.6.5-rc3-mm1     0w/0e     5w/0e   129w/ 0e   8w/0e   4w/0e    129w/0e
2.6.5-rc2-mm5     0w/0e     5w/0e   130w/ 0e   8w/0e   4w/0e    129w/0e
2.6.5-rc2-mm4     0w/0e     5w/0e   134w/ 0e   8w/0e   3w/0e    133w/0e
2.6.5-rc2-mm3     0w/0e     5w/0e   134w/ 0e   8w/0e   3w/0e    133w/0e
2.6.5-rc2-mm2     0w/0e     5w/0e   137w/ 0e   8w/0e   3w/0e    134w/0e
2.6.5-rc2-mm1     0w/0e     5w/0e   136w/ 0e   8w/0e   3w/0e    134w/0e
2.6.5-rc1-mm2     0w/0e     5w/0e   135w/ 5e   8w/0e   3w/0e    133w/0e
2.6.5-rc1-mm1     0w/0e     5w/0e   135w/ 5e   8w/0e   3w/0e    133w/0e
2.6.4-mm2         1w/2e     5w/2e   144w/10e   8w/0e   3w/2e    144w/0e
2.6.4-mm1         1w/0e     5w/0e   146w/ 5e   8w/0e   3w/0e    144w/0e
2.6.4-rc2-mm1     1w/0e     5w/0e   146w/12e  11w/0e   3w/0e    147w/2e
2.6.4-rc1-mm2     1w/0e     5w/0e   144w/ 0e  11w/0e   3w/0e    145w/0e
2.6.4-rc1-mm1     1w/0e     5w/0e   147w/ 5e  11w/0e   3w/0e    147w/0e
2.6.3-mm4         1w/0e     5w/0e   146w/ 0e   7w/0e   3w/0e    142w/0e
2.6.3-mm3         1w/2e     5w/2e   146w/15e   7w/0e   3w/2e    144w/5e
2.6.3-mm2         1w/8e     5w/0e   140w/ 0e   7w/0e   3w/0e    138w/0e
2.6.3-mm1         1w/0e     5w/0e   143w/ 5e   7w/0e   3w/0e    141w/0e
2.6.3-rc3-mm1     1w/0e     0w/0e   144w/13e   7w/0e   3w/0e    142w/3e
2.6.3-rc2-mm1     1w/0e     0w/265e 144w/ 5e   7w/0e   3w/0e    145w/0e
2.6.3-rc1-mm1     1w/0e     0w/265e 141w/ 5e   7w/0e   3w/0e    143w/0e
2.6.2-mm1         2w/0e     0w/264e 147w/ 5e   7w/0e   3w/0e    173w/0e
2.6.2-rc3-mm1     2w/0e     0w/265e 146w/ 5e   7w/0e   3w/0e    172w/0e
2.6.2-rc2-mm2     0w/0e     0w/264e 145w/ 5e   7w/0e   3w/0e    171w/0e
2.6.2-rc2-mm1     0w/0e     0w/264e 146w/ 5e   7w/0e   3w/0e    172w/0e
2.6.2-rc1-mm3     0w/0e     0w/265e 144w/ 8e   7w/0e   3w/0e    169w/0e
2.6.2-rc1-mm2     0w/0e     0w/264e 144w/ 5e  10w/0e   3w/0e    171w/0e
2.6.2-rc1-mm1     0w/0e     0w/264e 144w/ 5e  10w/0e   3w/0e    171w/0e
2.6.1-mm5         2w/5e     0w/264e 153w/11e  10w/0e   3w/0e    180w/0e
2.6.1-mm4         0w/821e   0w/264e 154w/ 5e   8w/1e   5w/0e    179w/0e
2.6.1-mm3         0w/0e     0w/0e   151w/ 5e  10w/0e   3w/0e    177w/0e
2.6.1-mm2         0w/0e     0w/0e   143w/ 5e  12w/0e   3w/0e    171w/0e
2.6.1-mm1         0w/0e     0w/0e   146w/ 9e  12w/0e   6w/0e    171w/0e
2.6.1-rc2-mm1     0w/0e     0w/0e   149w/ 0e  12w/0e   6w/0e    171w/4e
2.6.1-rc1-mm2     0w/0e     0w/0e   157w/15e  12w/0e   3w/0e    185w/4e
2.6.1-rc1-mm1     0w/0e     0w/0e   156w/10e  12w/0e   3w/0e    184w/2e
2.6.0-mm2         0w/0e     0w/0e   161w/ 0e  12w/0e   3w/0e    189w/0e
2.6.0-mm1         0w/0e     0w/0e   173w/ 0e  12w/0e   3w/0e    212w/0e

John

#42 lore raw
In reply to Andrew Morton

Andrew Morton <[email protected]> :
[...]

Quoted 2 lines

- Last, final, ultimate call: if anyone has patches in here which are 2.6.11 material, please tell me.

Any chance to convince the alien who took control of Jeff's libata queue to push:

r8169: synchronization and balancing when the device is closed

(1.1982.1.58 ?)

Test case on current 2.6.11-rc4:
- ifconfig ethX 10.0.0.1 up
- ifconfig ethX down
- ifconfig ethX 10.0.0.1 up
-> Rx does not work any more
- ifconfig ethX down
-> command hangs

--
Ueimor

#43 lore raw
In reply to Andrew Morton
Quoted 10 lines · Andrew Morton

ftp://ftp.kernel.org/pub/linux/kernel/people/akpm/patches/2.6/2.6.11-rc4/2.6.11-rc4-mm1/

- Various fixes and updates all over the place. Things seem to have slowed down a bit.

- Last, final, ultimate call: if anyone has patches in here which are 2.6.11 material, please tell me.

Two points:

- I lost my keyboard :(. USB, but plugged into PS/2 with an adapter.
- hdb is missing. initscripts show an strange message about hdq ?? As I read the same on other post, I think something has screwed the ide device naming scheme ...

TIA

--
J.A. Magallon <jamagallon()able!es> \ Software is like sex:
werewolf!able!es \ It's better when it's free
Mandrakelinux release 10.2 (Cooker) for i586
Linux 2.6.10-jam10 (gcc 3.4.3 (Mandrakelinux 10.2 3.4.3-3mdk)) #2

#44 lore raw
Quoted 9 lines · J.A. Magallon
Quoted 7 lines · Andrew Morton

ftp://ftp.kernel.org/pub/linux/kernel/people/akpm/patches/2.6/2.6.11-rc4/2.6.11-rc4-mm1/

- Various fixes and updates all over the place. Things seem to have slowed down a bit.

Quoted 7 lines
Quoted 3 lines

- Last, final, ultimate call: if anyone has patches in here which are 2.6.11 material, please tell me.

Two points:

- I lost my keyboard :(. USB, but plugged into PS/2 with an adapter.

Mine too. Details sent in another message...

Ed

Quoted 20 lines

- hdb is missing. initscripts show an strange message about hdq ?? As I read the same on other post, I think something has screwed the ide device naming scheme ...

TIA

--
J.A. Magallon <jamagallon()able!es> \ Software is like sex:
werewolf!able!es \ It's better when it's free
Mandrakelinux release 10.2 (Cooker) for i586
Linux 2.6.10-jam10 (gcc 3.4.3 (Mandrakelinux 10.2 3.4.3-3mdk)) #2

-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/

#45 lore raw
Quoted 14 lines · Ed Tomlinson
Quoted 13 lines · J.A. Magallon
Quoted 10 lines · Andrew Morton

ftp://ftp.kernel.org/pub/linux/kernel/people/akpm/patches/2.6/2.6.11-rc4/2.6.11-rc4-mm1/

- Various fixes and updates all over the place. Things seem to have slowed down a bit.

- Last, final, ultimate call: if anyone has patches in here which are 2.6.11 material, please tell me.

Quoted 6 lines
Quoted 3 lines

Two points:

- I lost my keyboard :(. USB, but plugged into PS/2 with an adapter.

Mine too. Details sent in another message...

Does i8042.nopnp help?

Signature · 1 line
Dmitry
#46 lore raw
Quoted 15 lines · Dmitry Torokhov
Quoted 14 lines · Ed Tomlinson
Quoted 13 lines · J.A. Magallon
Quoted 10 lines · Andrew Morton

ftp://ftp.kernel.org/pub/linux/kernel/people/akpm/patches/2.6/2.6.11-rc4/2.6.11-rc4-mm1/

- Various fixes and updates all over the place. Things seem to have slowed down a bit.

- Last, final, ultimate call: if anyone has patches in here which are 2.6.11 material, please tell me.

Quoted 8 lines
Quoted 6 lines
Quoted 3 lines

Two points:

- I lost my keyboard :(. USB, but plugged into PS/2 with an adapter.

Mine too. Details sent in another message...

Does i8042.nopnp help?

Dmitry, Yes it works fine with this kernel parm. I run with hotplug on and udev off.

Andrew, 11-bk is also fine (without the parm).

Thanks
Ed Tomlinson

#47 lore raw
In reply to Dmitry Torokhov

Dmitry Torokhov a ecrit le 24.02.2005 00:40:

Quoted 14 lines · Ed Tomlinson
Quoted 13 lines · J.A. Magallon
Quoted 11 lines · Andrew Morton
Quoted 8 lines

ftp://ftp.kernel.org/pub/linux/kernel/people/akpm/patches/2.6/2.6.11-rc4/2.6.11-rc4-mm1/

- Various fixes and updates all over the place. Things seem to have slowed down a bit.

- Last, final, ultimate call: if anyone has patches in here which are 2.6.11 material, please tell me.

Quoted 8 lines
Quoted 6 lines
Quoted 4 lines

Two points:

- I lost my keyboard :(. USB, but plugged into PS/2 with an adapter.

Mine too. Details sent in another message...

Does i8042.nopnp help?

yes, keyboard is back

Andrew Morton a ecrit le 24.02.2005 00:25:

Quoted 7 lines
Quoted 1 line · Ed Tomlinson

It does not seem to be finding the keyboard at all...

Can you confirm that Linus's tree is OK? You'd best use the patch at
http://www.kernel.org/pub/linux/kernel/v2.5/testing/cset/ to make
sure you have the latest stuff.

2.6.11-rc4 +
http://www.kernel.org/pub/linux/kernel/v2.5/testing/cset/cset-20050223_2308.txt.gz
is indeed ok :

Feb 24 01:08:23 odie kernel: Kernel command line: BOOT_IMAGE=2.6.11-rc4-ff ro root=305 hdd=ide-scsi
[...]
Feb 24 01:08:23 odie kernel: input: AT Translated Set 2 keyboard on isa0060/serio0

Thank you,
Fabian

#48 lore raw
In reply to Dmitry Torokhov
Quoted 15 lines · Dmitry Torokhov
Quoted 14 lines · Ed Tomlinson
Quoted 13 lines · J.A. Magallon
Quoted 10 lines · Andrew Morton

ftp://ftp.kernel.org/pub/linux/kernel/people/akpm/patches/2.6/2.6.11-rc4/2.6.11-rc4-mm1/

- Various fixes and updates all over the place. Things seem to have slowed down a bit.

- Last, final, ultimate call: if anyone has patches in here which are 2.6.11 material, please tell me.

Quoted 9 lines
Quoted 6 lines
Quoted 3 lines

Two points:

- I lost my keyboard :(. USB, but plugged into PS/2 with an adapter.

Mine too. Details sent in another message...

Does i8042.nopnp help?

Yes, that makes things work.
Even better than ever before, now an USB mouse and a PS/2 logitech trackball work fine both at the same time. In console and in X. In previous kernels PS/2 was dead or jumped heavily when an usb mouse was plugged. The keyboard works both in PS/2 (with adapter) and in USB.

Now a tricky question: the mouse and the trackball move the pointer in X at different speeds. Is there any way to tell the kernel they have the same DPI ? Or can I tweak the speed/DPI settings for them separately to get a more or less similar movement ?

TIA

--
J.A. Magallon <jamagallon()able!es> \ Software is like sex:
werewolf!able!es \ It's better when it's free
Mandrakelinux release 10.2 (Cooker) for i586
Linux 2.6.10-jam11 (gcc 3.4.3 (Mandrakelinux 10.2 3.4.3-3mdk)) #1

#49 lore raw
Quoted 33 lines · J.A. Magallon
Quoted 15 lines · Dmitry Torokhov
Quoted 14 lines · Ed Tomlinson
Quoted 13 lines · J.A. Magallon
Quoted 10 lines · Andrew Morton

ftp://ftp.kernel.org/pub/linux/kernel/people/akpm/patches/2.6/2.6.11-rc4/2.6.11-rc4-mm1/

- Various fixes and updates all over the place. Things seem to have slowed down a bit.

- Last, final, ultimate call: if anyone has patches in here which are 2.6.11 material, please tell me.

Quoted 9 lines
Quoted 6 lines
Quoted 3 lines

Two points:

- I lost my keyboard :(. USB, but plugged into PS/2 with an adapter.

Mine too. Details sent in another message...

Does i8042.nopnp help?

Yes, that makes things work.
Even better than ever before, now an USB mouse and a PS/2 logitech trackball work fine both at the same time. In console and in X. In previous kernels PS/2 was dead or jumped heavily when an usb mouse was plugged. The keyboard works both in PS/2 (with adapter) and in USB.

Quoted 5 lines

Now a tricky question: the mouse and the trackball move the pointer in X at different speeds. Is there any way to tell the kernel they have the same DPI ? Or can I tweak the speed/DPI settings for them separately to get a more or less similar movement ?

You can try changing PS/2 mouse rate and resolution via the following sysfs attributes:

/sys/bus/serio/devices/serioX/rate
/sys/bus/serio/devices/serioX/resolution

like this:

echo -n "200" > /sys/bus/serio/devices/serio1/resolution

Or you could try setting both mice as separate devices in X...

Signature · 1 line
Dmitry
#50 lore raw
In reply to Andrew Morton
Quoted 9 lines · Andrew Morton

ftp://ftp.kernel.org/pub/linux/kernel/people/akpm/patches/2.6/2.6.11-rc4/2.6.11-rc4-mm1/

- Various fixes and updates all over the place. Things seem to have slowed down a bit.

- Last, final, ultimate call: if anyone has patches in here which are 2.6.11 material, please tell me.

It boots fine here except that my keyboard is dead, rc3-mm2 is fine. The .config was built via using rc3-mm2's config and make oldconfig. Looking it the boot log I see:

in rc3-mm2

Feb 23 17:49:20 grover kernel: Initializing Cryptographic API
Feb 23 17:49:20 grover kernel: Linux agpgart interface v0.101 (c) Dave Jones
Feb 23 17:49:20 grover kernel: [drm] Initialized drm 1.0.0 20040925
Feb 23 17:49:20 grover kernel: ACPI: PS/2 Keyboard Controller [PS2K] at I/O 0x60, 0x64, irq 1
Feb 23 17:49:20 grover kernel: ACPI: PS/2 Mouse Controller [PS2M] at irq 12
Feb 23 17:49:20 grover kernel: serio: i8042 AUX port at 0x60,0x64 irq 12
Feb 23 17:49:20 grover kernel: serio: i8042 KBD port at 0x60,0x64 irq 1
Feb 23 17:49:20 grover kernel: Serial: 8250/16550 driver $Revision: 1.90 $ 48 ports, IRQ sharing enabled

in rc4-mm1

Feb 23 17:46:54 grover kernel: Initializing Cryptographic API
Feb 23 17:46:54 grover kernel: inotify device minor=63
Feb 23 17:46:54 grover kernel: Linux agpgart interface v0.101 (c) Dave Jones
Feb 23 17:46:54 grover kernel: [drm] Initialized drm 1.0.0 20040925
Feb 23 17:46:54 grover kernel: Serial: 8250/16550 driver $Revision: 1.90 $ 48 ports, IRQ sharing enabled
Feb 23 17:46:54 grover kernel: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A

It does not seem to be finding the keyboard at all...

Ideas?
Ed Tomlinson

.config 2005-02-23 07:10:53.000000000 -0500 renamed from 11-3-2/.config 2005-02-12 09:55:28.000000000 -0500 +33 -2
diff -u ../11-3-2/.config .config
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.11-rc3-mm2
-# Sat Feb 12 09:55:28 2005
+# Linux kernel version: 2.6.11-rc4-mm1
+# Wed Feb 23 07:10:53 2005
 #
 CONFIG_X86_64=y
 CONFIG_64BIT=y
@@ -91,6 +91,7 @@
 CONFIG_X86_MCE_INTEL=y
 CONFIG_PHYSICAL_START=0x100000
 CONFIG_KEXEC=y
+CONFIG_SECCOMP=y
 CONFIG_GENERIC_HARDIRQS=y
 CONFIG_GENERIC_IRQ_PROBE=y
 
@@ -119,6 +120,8 @@
 CONFIG_ACPI_ASUS=m
 # CONFIG_ACPI_IBM is not set
 CONFIG_ACPI_TOSHIBA=m
+# CONFIG_ACPI_PCC is not set
+# CONFIG_ACPI_SONY is not set
 CONFIG_ACPI_BLACKLIST_YEAR=0
 # CONFIG_ACPI_DEBUG is not set
 CONFIG_ACPI_BUS=y
@@ -459,6 +462,7 @@
 CONFIG_BLK_DEV_SR=m
 # CONFIG_BLK_DEV_SR_VENDOR is not set
 CONFIG_CHR_DEV_SG=m
+# CONFIG_CHR_DEV_SCH is not set
 
 #
 # Some SCSI devices (e.g. CD jukebox) support multiple LUNs
@@ -493,6 +497,7 @@
 # CONFIG_SCSI_ATA_PIIX is not set
 CONFIG_SCSI_SATA_NV=m
 # CONFIG_SCSI_SATA_PROMISE is not set
+# CONFIG_SCSI_SATA_QSTOR is not set
 # CONFIG_SCSI_SATA_SX4 is not set
 # CONFIG_SCSI_SATA_SIL is not set
 # CONFIG_SCSI_SATA_SIS is not set
@@ -543,6 +548,8 @@
 CONFIG_DM_SNAPSHOT=m
 CONFIG_DM_MIRROR=m
 CONFIG_DM_ZERO=m
+CONFIG_DM_MULTIPATH=m
+CONFIG_DM_MULTIPATH_EMC=m
 
 #
 # Fusion MPT device support
@@ -971,6 +978,11 @@
 CONFIG_BT_HCIBPA10X=m
 CONFIG_BT_HCIBFUSB=m
 CONFIG_BT_HCIVHCI=m
+CONFIG_IEEE80211=m
+# CONFIG_IEEE80211_DEBUG is not set
+CONFIG_IEEE80211_CRYPT_WEP=m
+CONFIG_IEEE80211_CRYPT_CCMP=m
+CONFIG_IEEE80211_CRYPT_TKIP=m
 CONFIG_NETDEVICES=y
 CONFIG_DUMMY=m
 CONFIG_BONDING=m
@@ -1263,6 +1275,8 @@
 # CONFIG_JOYSTICK_JOYDUMP is not set
 CONFIG_INPUT_TOUCHSCREEN=y
 CONFIG_TOUCHSCREEN_GUNZE=m
+# CONFIG_TOUCHSCREEN_ELO is not set
+# CONFIG_TOUCHSCREEN_MK712 is not set
 CONFIG_INPUT_MISC=y
 CONFIG_INPUT_PCSPKR=m
 CONFIG_INPUT_UINPUT=m
@@ -1293,6 +1307,7 @@
 CONFIG_VT=y
 CONFIG_VT_CONSOLE=y
 CONFIG_HW_CONSOLE=y
+CONFIG_INOTIFY=y
 CONFIG_SERIAL_NONSTANDARD=y
 CONFIG_COMPUTONE=m
 CONFIG_ROCKETPORT=m
@@ -1370,6 +1385,7 @@
 CONFIG_IB700_WDT=m
 CONFIG_WAFER_WDT=m
 CONFIG_I8XX_TCO=m
+# CONFIG_I6300ESB_WDT is not set
 CONFIG_SC1200_WDT=m
 CONFIG_SCx200_WDT=m
 CONFIG_60XX_WDT=m
@@ -1444,6 +1460,11 @@
 CONFIG_HANGCHECK_TIMER=m
 
 #
+# TPM devices
+#
+# CONFIG_TCG_TPM is not set
+
+#
 # I2C support
 #
 CONFIG_I2C=m
@@ -1471,6 +1492,7 @@
 CONFIG_I2C_NFORCE2=m
 CONFIG_I2C_PARPORT=m
 CONFIG_I2C_PARPORT_LIGHT=m
+# CONFIG_I2C_PIIX4 is not set
 CONFIG_I2C_PROSAVAGE=m
 CONFIG_I2C_SAVAGE4=m
 CONFIG_SCx200_ACB=m
@@ -1496,6 +1518,7 @@
 CONFIG_SENSORS_FSCHER=m
 # CONFIG_SENSORS_FSCPOS is not set
 CONFIG_SENSORS_GL518SM=m
+CONFIG_SENSORS_GL520SM=m
 CONFIG_SENSORS_IT87=m
 # CONFIG_SENSORS_LM63 is not set
 CONFIG_SENSORS_LM75=m
@@ -1509,6 +1532,7 @@
 CONFIG_SENSORS_MAX1619=m
 # CONFIG_SENSORS_PC87360 is not set
 # CONFIG_SENSORS_SMSC47B397 is not set
+CONFIG_SENSORS_SIS5595=m
 # CONFIG_SENSORS_SMSC47M1 is not set
 CONFIG_SENSORS_VIA686A=m
 CONFIG_SENSORS_W83781D=m
@@ -1682,6 +1706,10 @@
 # Graphics support
 #
 CONFIG_FB=y
+CONFIG_FB_CFB_FILLRECT=y
+CONFIG_FB_CFB_COPYAREA=y
+CONFIG_FB_CFB_IMAGEBLIT=y
+CONFIG_FB_SOFT_CURSOR=y
 CONFIG_FB_MODE_HELPERS=y
 # CONFIG_FB_TILEBLITTING is not set
 CONFIG_FB_CIRRUS=m
@@ -1695,6 +1723,7 @@
 CONFIG_VIDEO_SELECT=y
 CONFIG_FB_HGA=m
 # CONFIG_FB_HGA_ACCEL is not set
+# CONFIG_FB_NVIDIA is not set
 CONFIG_FB_RIVA=m
 CONFIG_FB_RIVA_I2C=y
 CONFIG_FB_RIVA_DEBUG=y
@@ -1726,6 +1755,7 @@
 CONFIG_FB_VOODOO1=m
 CONFIG_FB_TRIDENT=m
 # CONFIG_FB_TRIDENT_ACCEL is not set
+# CONFIG_FB_GEODE is not set
 CONFIG_FB_VIRTUAL=m
 
 #
@@ -2281,6 +2311,7 @@
 CONFIG_MAGIC_SYSRQ=y
 CONFIG_LOG_BUF_SHIFT=14
 CONFIG_DETECT_SOFTLOCKUP=y
+# CONFIG_PRINTK_TIME is not set
 # CONFIG_SCHEDSTATS is not set
 # CONFIG_DEBUG_SLAB is not set
 CONFIG_DEBUG_PREEMPT=y
#52 lore raw

2.6.11-rc4-mm1: infiniband/core/user_mad.c warning

In reply to Andrew Morton
Quoted 5 lines · Andrew Morton

...
Changes since 2.6.11-rc3-mm1:
...
bk-driver-core-infiniband-build-fix.patch
...

This gives me the following compile error:

<-- snip -->

...
CC drivers/infiniband/core/user_mad.o
drivers/infiniband/core/user_mad.c:587: warning: 'class_device_attr_dev' defined but not used
...

<-- snip -->

Reverting this patch fixes the warning (but I don't know about the underlying issues).

cu
Adrian

Signature · 4 lines
       "Is there not promise of rain?" Ling Tan asked suddenly out
        of the darkness. There had been need of rain for many days.
       "Only a promise," Lao Er said.
                                       Pearl S. Buck - Dragon Seed
#53 lore raw

PATCH 1/1 drivers/md/dm-hw-handler.c: fix compile warnings

In reply to Andrew Morton
Quoted 7 lines · Andrew Morton

...
Changes since 2.6.11-rc3-mm1:
...
+device-mapper-multipath-hardware-handler.patch
...
More DM updates
...

This causes the following compile warnings:

<-- snip -->

...
CC drivers/md/dm-hw-handler.o
drivers/md/dm-hw-handler.c: In function `dm_scsi_err_handler':
drivers/md/dm-hw-handler.c:154: warning: unused variable sense_key' drivers/md/dm-hw-handler.c:154: warning: unused variable asc' drivers/md/dm-hw-handler.c:154: warning: unused variable `ascq'
...

<-- snip -->

Trivial fix:

<-- snip -->

drivers/md/dm-hw-handler.c renamed from drivers/md/dm-hw-handler.c.old +1 -1
@@ -151,9 +151,9 @@
 
 unsigned dm_scsi_err_handler(struct hw_handler *hwh, struct bio *bio)
 {
+#if 0
 	int sense_key, asc, ascq;
 
-#if 0
 	if (bio->bi_error & BIO_SENSE) {
 		/* FIXME: This is just an initial guess. */
 		/* key / asc / ascq */
#54 lore raw

PATCH 1/1 seccomp: don't say it was more or less mandatory

In reply to Andrew Morton

seccomp might be a nice feature under some circumstances. But the suggestion in the help text is IMHO too strong and therefore removed by this patch.

arch/i386/Kconfig renamed from arch/i386/Kconfig.old +0 -2
@@ -903,8 +903,6 @@
 	  and the task is only allowed to execute a few safe syscalls
 	  defined by each seccomp mode.
 
-	  If unsure, say Y. Only embedded should say N here.
-
 source "drivers/perfctr/Kconfig"
 
 config PHYSICAL_START
#55 lore raw

Re: [-mm patch] seccomp: don't say it was more or less mandatory

Hello Adrian,

Quoted 3 lines · Adrian Bunk

seccomp might be a nice feature under some circumstances. But the suggestion in the help text is IMHO too strong and therefore removed by this patch.

Why too strong? The reason there is a config option is for the embedded space, where clearly they want to compile into the kernel only the strict features they use.

There are no risks in enabling seccomp and the size of the kernel image won't change in any significant way either.

So I'd prefer to keep the "If unsure, say Y." and it seems appropriate to me.

You have to say Y, if later on you want to sell your CPU resources with Cpushare. BTW, you can already test it if you download version 0.8 of the LGPL'd Cpushare software, it'll connect to the server and it'll execute a remote seccomp computation and then it'll hang around until you stop it with ./stop_cpushare.sh (and you will see your client connected in the homepage stats). I didn't finish writing all the code yet but it's already a decent demo for the seccomp part at least.

Anyway the help text is a minor detail after all. Thanks to everyone who helped and provided feedback about the seccomp patch, especially to Andrew. I'm very glad to see it in -mm right now!

#56 lore raw

Re: [-mm patch] seccomp: don't say it was more or less mandatory

Quoted 1 line · Andrea Arcangeli

Hello Adrian,

Hi Andrea,

Quoted 15 lines · Adrian Bunk
Quoted 3 lines

seccomp might be a nice feature under some circumstances. But the suggestion in the help text is IMHO too strong and therefore removed by this patch.

Why too strong? The reason there is a config option is for the embedded space, where clearly they want to compile into the kernel only the strict features they use.

There are no risks in enabling seccomp and the size of the kernel image won't change in any significant way either.

So I'd prefer to keep the "If unsure, say Y." and it seems appropriate to me.

Quoted 8 lines

You have to say Y, if later on you want to sell your CPU resources with Cpushare. BTW, you can already test it if you download version 0.8 of the LGPL'd Cpushare software, it'll connect to the server and it'll execute a remote seccomp computation and then it'll hang around until you stop it with ./stop_cpushare.sh (and you will see your client connected in the homepage stats). I didn't finish writing all the code yet but it's already a decent demo for the seccomp part at least.
...

this sounds more like an "If unsure, say N.":
You don't need this feature unless you know you need it.

It's not about risk or the actual size of the code - there are many small or big features in the kernel that might be useful under some circumstances, but even the IPv6 help text still suggests to say N to IPv6.

cu
Adrian

Signature · 4 lines
       "Is there not promise of rain?" Ling Tan asked suddenly out
        of the darkness. There had been need of rain for many days.
       "Only a promise," Lao Er said.
                                       Pearl S. Buck - Dragon Seed
#57 lore raw

Re: [-mm patch] seccomp: don't say it was more or less mandatory

Quoted 1 line · Adrian Bunk

You don't need this feature unless you know you need it.

But you may not know that you need it since in the help text I intentionally didn't mention which software requires the option to be set to Y (I didn't mention it, since I didn't want to use the kernel configuration help text to get free advertisement, but OTOH if people is unsure while they configure the kernel I certainly prefer that they set it to Y ;).

Quoted 4 lines

It's not about risk or the actual size of the code - there are many small or big features in the kernel that might be useful under some circumstances, but even the IPv6 help text still suggests to say N to IPv6.

IPV6 is some relevant amount of code and complexity, seccomp is only a few bytes and very simple, it's not even a kbyte of ram that you're paying if you enable it. Only embedded cares about bytes, and that's why the option exists for embedded.

One thing I'm concerned about (more than the "Y" in the help text) is that the distributions will enable the option in their binary kernel images. I hope they will given it's only a matter of a few bytes.

Thanks.

#58 lore raw

Re: [-mm patch] seccomp: don't say it was more or less mandatory

Quoted 10 lines · Andrea Arcangeli
Quoted 1 line · Adrian Bunk

You don't need this feature unless you know you need it.

But you may not know that you need it since in the help text I intentionally didn't mention which software requires the option to be set to Y (I didn't mention it, since I didn't want to use the kernel configuration help text to get free advertisement, but OTOH if people is unsure while they configure the kernel I certainly prefer that they set it to Y ;).
...

If you want to use Cpushare, you know that you have to enable seccomp.

Quoted 1 line

Thanks.

cu
Adrian

Signature · 4 lines
       "Is there not promise of rain?" Ling Tan asked suddenly out
        of the darkness. There had been need of rain for many days.
       "Only a promise," Lao Er said.
                                       Pearl S. Buck - Dragon Seed
#59 lore raw

Re: [-mm patch] seccomp: don't say it was more or less mandatory

Quoted 1 line · Adrian Bunk

If you want to use Cpushare, you know that you have to enable seccomp.

Oh yeah, I know it, you know it, but not everyone will know it while configuring the kernel, infact I doubt they'll even know what Cpushare is about while they configure the kernel ;). And I doubt they should be required to know all those details in order to make that choice, and my point is that seccomp is low overhead enough that everyone can enable it if they're unsure, just in case. I'm just trying to explain why I recommend it to Y by default "if unsure".

#60 lore raw

Re: [-mm patch] seccomp: don't say it was more or less mandatory

Quoted 10 lines · Andrea Arcangeli
Quoted 1 line · Adrian Bunk

If you want to use Cpushare, you know that you have to enable seccomp.

Oh yeah, I know it, you know it, but not everyone will know it while configuring the kernel, infact I doubt they'll even know what Cpushare is about while they configure the kernel ;). And I doubt they should be required to know all those details in order to make that choice, and my point is that seccomp is low overhead enough that everyone can enable it if they're unsure, just in case. I'm just trying to explain why I recommend it to Y by default "if unsure".

My point is simply:

The help text for an option you need only under very specific circumstances shouldn't sound as if this option was nearly was mandatory.

For me, that's a question principle, not of risks of breakage or code size.

cu
Adrian

Signature · 4 lines
       "Is there not promise of rain?" Ling Tan asked suddenly out
        of the darkness. There had been need of rain for many days.
       "Only a promise," Lao Er said.
                                       Pearl S. Buck - Dragon Seed
#61 lore raw

Re: [-mm patch] seccomp: don't say it was more or less mandatory

Quoted 8 lines · Adrian Bunk

My point is simply:

The help text for an option you need only under very specific circumstances shouldn't sound as if this option was nearly was mandatory.

For me, that's a question principle, not of risks of breakage or code size.

My point is that the size of the linux desktop userbase is already small compared to other OS userbase, and I don't want to fragment it even further risking people to set it to N. People setting this to N is an huge risk. If most people set it to N I'll be forced to switch to make drastic plan changes right away. This is why I'd prefer to leave the Y recommandation for now ;)

Or I'll make it a syscall, do the embedded folks have a compilation option to disable the sys_sched_setaffinity syscalls and bytecode? No they don't. By you your same argument we should add a CONFIG_SCHED_AFFININITY and we shouldn't recommend it to Y.

This isn't a device driver, this is a linux kernel API that some app can depend on, and you don't know for sure which app will depend on it. So you should definitely say Y if unsure.

#62 lore raw

Re: [-mm patch] seccomp: don't say it was more or less mandatory

In reply to Adrian Bunk
Quoted 6 lines · Adrian Bunk

My point is simply:

The help text for an option you need only under very specific circumstances shouldn't sound as if this option was nearly was mandatory.

I think the sort of sell-your-cycles service which this patch enables is a neat idea, and one which is worth supporting, especially as the kernel patch is so tiny. So we want as many machines as possible to support it. So people don't need a special kernel just to join in.

Others may disagree, although nobody has.

And the patch is tiny.

#63 lore raw

Re: [-mm patch] seccomp: don't say it was more or less mandatory

Quoted 8 lines · Andrew Morton
Quoted 6 lines · Adrian Bunk

My point is simply:

The help text for an option you need only under very specific circumstances shouldn't sound as if this option was nearly was mandatory.

Quoted 8 lines

I think the sort of sell-your-cycles service which this patch enables is a neat idea, and one which is worth supporting, especially as the kernel patch is so tiny. So we want as many machines as possible to support it. So people don't need a special kernel just to join in.

Others may disagree, although nobody has.

And the patch is tiny.

see my earlier counter-arguments in the thread starting at:

http://marc.theaimsgroup.com/?l=linux-kernel&m=110630922022462&w=2

end result of the thread: seccomp is completely unnecessary code-bloat and can be equivalently implemented via ptrace. I cannot believe this made it into -BK ...

Ingo

#64 lore raw

Re: [-mm patch] seccomp: don't say it was more or less mandatory

we at a minimum need the patch below.

Ingo

arch/i386/Kconfig renamed from arch/i386/Kconfig.orig +0 -1
@@ -909,7 +909,6 @@ config REGPARM
 config SECCOMP
 	bool "Enable seccomp to safely compute untrusted bytecode"
 	depends on PROC_FS
-	default y
 	help
 	  This kernel feature is useful for number crunching applications
 	  that may need to compute untrusted bytecode during their
#65 lore raw

Re: [-mm patch] seccomp: don't say it was more or less mandatory

In reply to Ingo Molnar
Quoted 7 lines · Ingo Molnar

see my earlier counter-arguments in the thread starting at:

http://marc.theaimsgroup.com/?l=linux-kernel&m=110630922022462&w=2

end result of the thread: seccomp is completely unnecessary code-bloat and can be equivalently implemented via ptrace. I cannot believe this made it into -BK ...

let me moderate my initial reaction somewhat:

the point i see in seccomp is that while it cannot be trusted right now (not because of any known factor but simply because it doesnt have enough review, yet), it might at a certain point (in many years) become more trustable than TRACE_SYSCALLS.

It doesnt use a 'server' process to control syscall execution, everything is enforced by the kernel. It is also intentionally simple, and hence maybe even provably secure from a Comp-Sci POV. (assuming sys_read()/sys_write() and hardware-irq processing itself is secure, which quite likely wont be provable in the foreseeable future).

Also, while the technological arguments i raised in support of ptrace are true, ptrace has a perception issue: it is perceived as insecure - even if PTRACE_TRACE itself is not affected. And when building trust in a processing platform, perception is just as important as raw security.

this combination of arguments i think tips the balance in favor of seccomp, but still, i hate the fact that the anti-ptrace sentiment was used as a vehicle to get this feature into the kernel.

technical comment: seccomp goes outside the audit/selinux framework, which i believe is a bug. Andrea?

Ingo

#66 lore raw

Re: [-mm patch] seccomp: don't say it was more or less mandatory

Quoted 3 lines · Ingo Molnar

this combination of arguments i think tips the balance in favor of seccomp, but still, i hate the fact that the anti-ptrace sentiment was used as a vehicle to get this feature into the kernel.

Why should I use excuses to get this feature into the kernel if this wasn't the best way to reach my goal? Do you think I'm shooting myself in the foot and that I'd be better off using ptrace?

One other reason of using seccomp that you didn't mention is how simple it is for me to code everything using seccomp (and this also makes me much more confortable about its security, regardless of ptrace). Seccomp is an arch indipendent API, ptrace is not.

It's not just the security of ptrace that is less desiderable, but it's also the API itself that is much less desiderable, since it's so lowlevel.

Quoted 1 line

which quite likely wont be provable in the foreseeable future).

Please mention a _single_ bug that could allow you to escape the seccomp jail in linux since 2.4.0 on x86 and x86-64 (and with escape I don't mean sniffing data with mmx not being backwards compatible, or f00f DoS, I mean executing code into the host as user nobody). I'm not aware of a _single_ seccomp bug that could allow you to escape the seccomp jail since 2.4.0 and probably much earlier.

Either you answer the above or you may want to stop spreading FUD about seccomp (and in turn about Cpushare security).

You know that a seccomp security bug is guaranteed to be a _major_ security bug for linux at large, not just for Cpushare, so I don't see why you claim it's not provable to be secure, since what you're really saying is that it's not provable that Linux is secure in multiuser environment.

Personally I'm very confortable that linux security is ok in read/write/signal/exit syscalls/irqs. At least as far as the software is concerned.

It's not like there was no auditing, since those code paths are the most heavily executed and if people go search into mremap is not because they wouldn't get any benefit in exploiting read(2) or write(2) instead of mremap. They look into mremap because they didn't find anything expoitable in read/write.

There have been positive comments from people about seccomp not just for my private project, so perhaps it will be used by others too.

In large grid environments security is important too, not just for Cpushare. In a large grid environment if one of those nodes is compromised by one user during his computations, this user may see and alter the results for the other computations of the other users and at least Cpushare is designed to detect and react to those conditions since the first place.

Infact once I add trusted computing to Cpushare, it might become more secure and reliable than a supercomputer for rent that is missing the trusted computing in the hardware.

Quoted 2 lines

technical comment: seccomp goes outside the audit/selinux framework, which i believe is a bug. Andrea?

I intentionally left it out of audit/selinux. To the less dependencies it has on other parts of the kernel and the simpler it is, the better IMHO. Seccomp should be fixed in stone, people shouldn't go hack on it every day.

#67 lore raw

Re: [-mm patch] seccomp: don't say it was more or less mandatory

Quoted 7 lines · Andrea Arcangeli
Quoted 2 lines

technical comment: seccomp goes outside the audit/selinux framework, which i believe is a bug. Andrea?

I intentionally left it out of audit/selinux. To the less dependencies it has on other parts of the kernel and the simpler it is, the better IMHO. Seccomp should be fixed in stone, people shouldn't go hack on it every day.

let me put it another way: this is a security hole. seccomp is now a way to evade the auditing of read/write syscalls done to an opened file. Please fix this.

Ingo

#68 lore raw

Re: [-mm patch] seccomp: don't say it was more or less mandatory

Quoted 3 lines · Ingo Molnar

let me put it another way: this is a security hole. seccomp is now a way to evade the auditing of read/write syscalls done to an opened file. Please fix this.

This is not true, the auditing of read/write will work fine on the seccomp task too. I guess you overlooked something in the code.

#69 lore raw

Re: [-mm patch] seccomp: don't say it was more or less mandatory

Quoted 2 lines · Andrea Arcangeli

This is not true, the auditing of read/write will work fine on the seccomp task too. I guess you overlooked something in the code.

yeah, you are right - it's there. You are driving seccomp off do_syscall_trace(), which does audit_syscall_entry().

Ingo

#70 lore raw

Re: [-mm patch] seccomp: don't say it was more or less mandatory

In reply to Andrea Arcangeli
Quoted 8 lines · Andrea Arcangeli
Quoted 1 line

which quite likely wont be provable in the foreseeable future).

Please mention a _single_ bug that could allow you to escape the seccomp jail in linux since 2.4.0 on x86 and x86-64 (and with escape I don't mean sniffing data with mmx not being backwards compatible, or f00f DoS, I mean executing code into the host as user nobody). I'm not aware of a _single_ seccomp bug that could allow you to escape the seccomp jail since 2.4.0 and probably much earlier.

ugh? Where do i claim any such thing?

while we are at it, please mention a single ptrace bug in the same timeframe that could allow a bytecode 'client' to escape a ptrace TRACE_SYSCALL jail at will.

Ingo

#71 lore raw

Re: [-mm patch] seccomp: don't say it was more or less mandatory

Quoted 1 line · Ingo Molnar

ugh? Where do i claim any such thing?

You never said such a thing, but you said you believe it's not provable that sys_read/write and hardware irq processing is secure in linux, so I wanted to get some statistical significance about your claim from you just in case I was missing something. I obviously can't have in memory every single bug since 2.4.0.

Quoted 3 lines

while we are at it, please mention a single ptrace bug in the same timeframe that could allow a bytecode 'client' to escape a ptrace TRACE_SYSCALL jail at will.

There was this bug around 2.4.10, IIRC a SIGCONT could let the ptraced task to continue executing. I don't want to depend on other applications not to send a signal by mistake to the ptraced task.

http://www.ussg.iu.edu/hypermail/linux/kernel/0109.0/1049.html

An oom killer triggering by mistake on a strace -p would have been enough too. You said if the ptracer is the group leader then the ptraced task will be killed at the same time, but I doubt many apps depends on this to be safe, that code is complex and it may break over time during development if signal handling changes or if the exit code changes.

The interesting point is that no app out there (except uml) becomes exploitable if you find some hole in TRACE_SYSCALL (at worse strace will screwup a bit). I don't think an huge amount of research has been done in those code paths (unlike it happened in mremap and many other kernel APIs). So even if there are bugs in ptrace they might not being considered security related. And UML has no other way than to use ptrace since it needs much more of what I need and UML cannot be arch indipendent.

While any seccomp security bug is guaranteed to be a major security linux bug too, so I'm more confortable that more research has been done in those core code paths than in TRACE_SYSCALL behaviour.

This below is all the code I had to write to secure the remote bytecode with seccomp, and it's fully arch indipendent (licence is LGPL). Ok, the seccomp kernel patch is 500 lines, so we should add 500 lines plus the below ~50 total ~550 lines, but the end result is much nicer and more secure IMHO. Plus this is simple enough that perhaps Cpushare won't be the only project using it.

class seccomp_protocol_class(protocol.ProcessProtocol):
def __init__(self, seccomp, d_start, d_end):
self.seccomp = seccomp
self.d_start, self.d_end = d_start, d_end
self.outReceived = self.enable_seccomp_mode
def connectionMade(self):
self.seccomp.cpushare_protocol.seccomp_protocols.append(self) self.seccomp.cpushare_protocol.transport.registerProducer(self, 1) self.transport.closeChildFD(2) # close stderr right away self.transport.writeToChild(0, self.seccomp.header + self.seccomp.text_data)
def enable_seccomp_mode(self, data):
assert data == MAGIC_ASK_SECCOMP, "didn't ask seccomp"

seccomp_file = '/proc/' + str(self.transport.pid) + '/seccomp'

if file(seccomp_file, 'r').read(1) != '0':
raise 'seccomp already enabled?'

file(seccomp_file, 'w').write('1')

if file(seccomp_file, 'r').read(1) != '1':
assert self.transport.pid is not None
print 'Killing the seccomp-loader before it starts the untrusted bytecode' self.sigkill()
raise 'seccomp enable failure'

self.outReceived = self.send_to_server self.transport.writeToChild(0, MAGIC_GOT_SECCOMP)

self.d_start.callback(None) # now the buyer is connected
def send_to_server(self, data):
self.seccomp.cpushare_protocol.sendString(PROTO_SECCOMP_FORWARD + data)
def recv_from_server(self, data):
self.transport.writeToChild(0, data)
def errReceived(self, data):
raise "shouldn't happen"
def processEnded(self, status):
self.seccomp.cpushare_protocol.seccomp_protocols.remove(self) self.seccomp.cpushare_protocol.transport.unregisterProducer()
if status.value.exitCode or status.value.signal:
if status.value.exitCode == 4:
print 'Failure in setting the stack size to %d bytes.' % self.seccomp.stack
if status.value.signal == signal.SIGKILL:
print 'Seccomp task gracefully killed by seccomp.'
elif status.value.signal == signal.SIGSEGV:
print 'Seccomp task gracefully killed by sigsegv.'
elif status.value.signal == signal.SIGQUIT:
print 'Seccomp task killed by sigquit - should never happen.'
self.d_end.errback(status)
else:
print 'Seccomp task completed successfully.' self.d_end.callback(None)

def sigquit(self):
if self.transport.pid is not None:
os.kill(self.transport.pid, signal.SIGQUIT)
def sigkill(self):
if self.transport.pid is not None:
os.kill(self.transport.pid, signal.SIGKILL)

#72 lore raw

Re: [-mm patch] seccomp: don't say it was more or less mandatory

Quoted 8 lines · Andrea Arcangeli
Quoted 1 line · Ingo Molnar

ugh? Where do i claim any such thing?

You never said such a thing, but you said you believe it's not provable that sys_read/write and hardware irq processing is secure in linux, so I wanted to get some statistical significance about your claim from you just in case I was missing something. I obviously can't have in memory every single bug since 2.4.0.

in fact, we had bugs on x86 where if userspace set up a specific value for %ebx the kernel would crash, because the irq entry code was incorrect. (this might even have been exploitable) So yes, if seccomp would be backported to that kernel, seccomp would be vulnerable too.

but this is not what i meant, what i meant was this:

Quoted 5 lines
Quoted 5 lines

[...] It is also intentionally simple,
and hence maybe even provably secure from a Comp-Sci POV. (assuming sys_read()/sys_write() and hardware-irq processing itself is secure, which quite likely wont be provable in the foreseeable future).

'provable' here means provable mathematically, as done in computer science. Not 'provable via good track record'. So what i said was in fact a compliment towards seccomp: i believe that as long as we assume certain external mechanisms (the whole hardware environment, and all irq/rest-of-kernel and read/write mechanisms) to be secure, the basic seccomp code itself (those 100-200 lines of code), _may_ be provably secure, mathematically. That would be a nice thing to have.

obviously the irq and sys_read/sys_write code is way too complex to be mathematically provable in the near future.

Quoted 7 lines
Quoted 3 lines

while we are at it, please mention a single ptrace bug in the same timeframe that could allow a bytecode 'client' to escape a ptrace TRACE_SYSCALL jail at will.

There was this bug around 2.4.10, IIRC a SIGCONT could let the ptraced task to continue executing. I don't want to depend on other applications not to send a signal by mistake to the ptraced task.

sorry, but if an attacker can cause arbitrary signals to be sent to your secure application (and the signals pass the security checks!) then you have much bigger problems!

this is what i feel is unfair: you are (unintentionally, i presume) mixing the security of the 'totality of ptrace APIs' with the security model that 'untrusted bytecode' is in.

Quoted 5 lines

The interesting point is that no app out there (except uml) becomes exploitable if you find some hole in TRACE_SYSCALL (at worse strace will screwup a bit). I don't think an huge amount of research has been done in those code paths (unlike it happened in mremap and many other kernel APIs). [...]

so your solution is to introduce a whole new API that duplicates much of what ptrace can already do, with just about the same amount of risk? So your solution is to leave UML out in the cold (and thus increasing risks altogether), by having a crippled mechanism that UML could never use? That i call a selfish NIH syndrome, not a security accomplishment.

but, i dont mind your code being in the kernel, for the reasons i stated, as long as the anti-ptrace fallacy is clearly understood. So you might have partly succeeded in social engineering your security feature into the kernel (feel the irony?), but i'm trying to counter what i believe to be false premises. Ptrace has its fundamental security problems, but PTRACE_TRACE is not nearly as bad and should not be confused with the kernel holes caused by other, security-independent ptrace debug mechanisms.

Ingo

#73 lore raw

Re: [-mm patch] seccomp: don't say it was more or less mandatory

Quoted 4 lines · Ingo Molnar

in fact, we had bugs on x86 where if userspace set up a specific value for %ebx the kernel would crash, because the irq entry code was incorrect. (this might even have been exploitable) So yes, if seccomp would be backported to that kernel, seccomp would be vulnerable too.

You said "might have been", so you should as well say "might be vulnerable" too. Either you go check and you prove it exploitable or you cannot say it would be vulnerable.

I've never heard of this %ebx bug that could be exploitable from my part.

I'm aware of several DoS but they're not really a problem since they can even be autodetected.

Quoted 7 lines

'provable' here means provable mathematically, as done in computer science. Not 'provable via good track record'. So what i said was in fact a compliment towards seccomp: i believe that as long as we assume certain external mechanisms (the whole hardware environment, and all irq/rest-of-kernel and read/write mechanisms) to be secure, the basic seccomp code itself (those 100-200 lines of code), _may_ be provably secure, mathematically. That would be a nice thing to have.

The hardware is not provable mathematically anyway, javascript is not provable mathematically anyway, JVM security for java applets is not provable mathematically anyway, jpeg decompression is not provable methematically anyway, gzip decompression is not provable mathematically anyway, a mail client decoding mime attachments is not provable mathematically anyway, the ip_conntrack code of the firewall is not provable anwyay, the ipsec stack is not math provable anyway, the compiler that compiled the source is not provale mathematically anyway, the tcp/ip stack is not provable mathematically anyway, I can go on forever.

The thing I care about is that seccomp is much more provable than the above and more provable than ptrace as well. Go ahead and disagree with this bold statement if you can.

Quoted 2 lines

obviously the irq and sys_read/sys_write code is way too complex to be mathematically provable in the near future.

Math provable is irrelevant with real software world since nobody has enough resources to demonstrate math correctness.

The only places where they truly do the math-provable thing is for the software avoding airplane mid air collisions or problems with a very limited scope, where it's simple enough that it's actually possible to prove it (i.e. obviously no real OS like linux, no paging and perhaps simpler compiler as well).

Quoted 3 lines

sorry, but if an attacker can cause arbitrary signals to be sent to your secure application (and the signals pass the security checks!) then you have much bigger problems!

It's not the attacker that sends the signal! It's a buggy application coming from the CDs, like a videogame hitting a bug.

Like kill(-1, SIGCONT) because the fork failed and for some reason the pid was set to -1.

Quoted 3 lines

this is what i feel is unfair: you are (unintentionally, i presume) mixing the security of the 'totality of ptrace APIs' with the security model that 'untrusted bytecode' is in.

What I want is a model that guarantees me that nothing from userland can ever un-release the bytecode so that it becomes free to execute in the system.

After I enable seccomp on the bytecode there's nothing that the user can do to un-seccomp the task (unless it changes the right bit in /dev/mem, but that can't be an accident unlike the kill(-1, SIGCONT)!).

This is not possible to achieve with ptrace.

Quoted 8 lines

but, i dont mind your code being in the kernel, for the reasons i stated, as long as the anti-ptrace fallacy is clearly understood. So you might have partly succeeded in social engineering your security feature into the kernel (feel the irony?), but i'm trying to counter what i believe to be false premises. Ptrace has its fundamental security problems, but PTRACE_TRACE is not nearly as bad and should not be confused with the kernel holes caused by other, security-independent ptrace debug mechanisms.

You're the one that wants to prove mathematically the code. So you should be aware that the more code that is involved, the harder it is to prove it mathematically safe. In real life math provable won't be doable in our lifetime, but still the auditing of the code will be more reliable the shorter the code is. All I did with seccomp is to reduce the amount of code that you want to prove mathematically. Spending any time to prove mathematically ptrace (or more realistically audit it) when somebody can change it at anytime would not be a good idea (for the other parts like read/write/pipe I can't avoid to re-audit, but ptrace I can definitely avoid to re-audit thanks to seccomp). Plus as shown, the API is an order of magnitude simpler to use and it's arch indipendent unlike ptrace, so perhaps I won't be the only one using it, and non-kernel developers may actually be able to use it too to do decompression and similar stuff.

If you can't see any benefit for my project in using in seccomp instead ptrace that's your problem because there are several tangible benefits that I already mentioned several times. So I'm not answering further emails to avoid repeating the same things over and over again.

#74 lore raw

Re: [-mm patch] seccomp: don't say it was more or less mandatory

Quoted 5 lines · Andrea Arcangeli
Quoted 2 lines

obviously the irq and sys_read/sys_write code is way too complex to be mathematically provable in the near future.

Math provable is irrelevant with real software world since nobody has enough resources to demonstrate math correctness.

(this is becoming tangential, but i'd not be as brave to suggest that formal provability of real software is irrelevant. It's not feasible today and probably not feasible in the near future. What tomorrow brings we cannot know.)

Quoted 6 lines
Quoted 3 lines

sorry, but if an attacker can cause arbitrary signals to be sent to your secure application (and the signals pass the security checks!) then you have much bigger problems!

It's not the attacker that sends the signal! It's a buggy application coming from the CDs, like a videogame hitting a bug.

well, for an attack to become possible, it's the attacker that has to be able to trigger it. By your logic i could say: 'many people use empty passwords for root, so it could easily happen that a seccomp box gets compromised that way'. The fact that sending SIGCONT to the seccomp application _seems_ to be more related to the security of the ptrace solution does not make it any more relevant in reality than the root password issue. (But i guess after many years i should be wiser not to get into such arguments with you.) And i've yet to see applications sending spurious SIGCONT's to each other 'by accident'.

OTOH, i accept your point that a 'no way back' kernel-enforced kind of sandbox (which seccomp provides and ptrace doesnt) is a useful concept.

Ingo

#75 lore raw

Re: [-mm patch] seccomp: don't say it was more or less mandatory

Quoted 2 lines · Ingo Molnar

password issue. (But i guess after many years i should be wiser not to get into such arguments with you.) [..]

Your last emails about math proofs, social engineering and selfish NIH syndrome were ridiculous, and now you get personal.

After all those emails I never heard a good argument from you that made me even slightly consider changing my plans and to use ptrace instead of seccomp, and at the end you are degenerating, so I'll have to take it as a contrarian indicator.

Drop seccomp from the RH kernels if that makes you feel better. You can always patch the Cpushare client to use ptrace instead of seccomp if you want. Put your code where your mouth is, the config option is there, keep it to N.

#76 lore raw

Re: [-mm patch] seccomp: don't say it was more or less mandatory

Quoted 3 lines · Andrea Arcangeli

After all those emails I never heard a good argument from you that made me even slightly consider changing my plans and to use ptrace instead of seccomp, [...]

maybe because i ended up agreeing with you? ;)

Ingo

#77 lore raw

Re: [-mm patch] seccomp: don't say it was more or less mandatory

Quoted 1 line · Ingo Molnar

maybe because i ended up agreeing with you? ;)

ok ;) I'm very happy that we agree.

#78 lore raw

PATCH 1/1 fix buggy IEEE80211_CRYPT_* selects

In reply to Andrew Morton
Quoted 5 lines · Andrew Morton

...
Changes since 2.6.11-rc3-mm1:
...
bk-netdev.patch
...

Some of the options that needlessly wrote in their help text which options they do selct (patch already sent) didn't obey the most important rule of select

If you select something, you have to ensure that the dependencies of what you do select are fulfilled.

resulting in the following compile error:

<-- snip -->

...
LD .tmp_vmlinux1
crypto/built-in.o(.init.text+0x31b): In function `aes_init':
: undefined reference to crypto_register_alg' crypto/built-in.o(.init.text+0x326): In function michael_mic_init':
: undefined reference to crypto_register_alg' crypto/built-in.o(.exit.text+0x6): In function aes_fini':
: undefined reference to crypto_unregister_alg' crypto/built-in.o(.exit.text+0x16): In function michael_mic_exit':
: undefined reference to crypto_unregister_alg' net/built-in.o(.text+0x5ba52): In function ieee80211_ccmp_init':
: undefined reference to crypto_alloc_tfm' net/built-in.o(.text+0x5ba94): In function ieee80211_ccmp_init':
: undefined reference to crypto_free_tfm' net/built-in.o(.text+0x5bab7): In function ieee80211_ccmp_deinit':
: undefined reference to crypto_free_tfm' net/built-in.o(.text+0x5c5c2): In function ieee80211_tkip_init':
: undefined reference to crypto_alloc_tfm' net/built-in.o(.text+0x5c5d5): In function ieee80211_tkip_init':
: undefined reference to crypto_alloc_tfm' net/built-in.o(.text+0x5c623): In function ieee80211_tkip_init':
: undefined reference to crypto_free_tfm' net/built-in.o(.text+0x5c62a): In function ieee80211_tkip_init':
: undefined reference to crypto_free_tfm' net/built-in.o(.text+0x5c65e): In function ieee80211_tkip_deinit':
: undefined reference to crypto_free_tfm' net/built-in.o(.text+0x5c665): In function ieee80211_tkip_deinit':
: undefined reference to `crypto_free_tfm'
make: *** [.tmp_vmlinux1] Error 1

<-- snip -->

This patch adds the missing selects of CRYPTO.

net/ieee80211/Kconfig renamed from net/ieee80211/Kconfig.old +2 -0
@@ -42,10 +42,11 @@
 	"ieee80211_crypt_wep".
 
 config IEEE80211_CRYPT_CCMP
 	tristate "IEEE 802.11i CCMP support"
 	depends on IEEE80211
+	select CRYPTO
 	select CRYPTO_AES
 	---help---
 	Include software based cipher suites in support of IEEE 802.11i 
 	(aka TGi, WPA, WPA2, WPA-PSK, etc.) for use with CCMP enabled 
 	networks.
@@ -54,10 +55,11 @@
 	"ieee80211_crypt_ccmp".
 
 config IEEE80211_CRYPT_TKIP
 	tristate "IEEE 802.11i TKIP encryption"
 	depends on IEEE80211
+	select CRYPTO
 	select CRYPTO_MICHAEL_MIC
 	---help---
 	Include software based cipher suites in support of IEEE 802.11i 
 	(aka TGi, WPA, WPA2, WPA-PSK, etc.) for use with TKIP enabled 
 	networks.
#79 lore raw

Re: [2.6.11-rc4-mm1 patch] fix buggy IEEE80211_CRYPT_* selects

Quoted 7 lines · Adrian Bunk
net/ieee80211/Kconfig renamed from net/ieee80211/Kconfig.old +1 -0
+	select CRYPTO
 	select CRYPTO_AES
 	---help---
 	Include software based cipher suites in support of IEEE 802.11i 
 	(aka TGi, WPA, WPA2, WPA-PSK, etc.) for use with CCMP enabled 
 	networks.

net/ieee80211/Kconfig line 61

Quoted 7 lines
net/ieee80211/Kconfig renamed from net/ieee80211/Kconfig.old +1 -0
@@ -54,10 +55,11 @@
 	"ieee80211_crypt_ccmp".
 
 config IEEE80211_CRYPT_TKIP
 	tristate "IEEE 802.11i TKIP encryption"
 	depends on IEEE80211
+	select CRYPTO
 	select CRYPTO_MICHAEL_MIC

'select CRYPTO_AES' should 'select CRYPTO' automatically, I would hope.

Jeff

#80 lore raw

Re: [2.6.11-rc4-mm1 patch] fix buggy IEEE80211_CRYPT_* selects

Quoted 10 lines · Jeff Garzik
Quoted 9 lines · Adrian Bunk
(quoted diff) +1 -0
+	select CRYPTO

select CRYPTO_AES
---help---
Include software based cipher suites in support of IEEE 802.11i (aka TGi, WPA, WPA2, WPA-PSK, etc.) for use with CCMP enabled networks.

net/ieee80211/Kconfig renamed from net/ieee80211/Kconfig.old +0 -0
@@ -54,10 +55,11 @@
 	"ieee80211_crypt_ccmp".
 
Quoted 8 lines
Quoted 5 lines

config IEEE80211_CRYPT_TKIP
tristate "IEEE 802.11i TKIP encryption"
depends on IEEE80211

(quoted diff) +1 -0
+	select CRYPTO

select CRYPTO_MICHAEL_MIC

'select CRYPTO_AES' should 'select CRYPTO' automatically, I would hope.

This would result in a recursive dependency.

Quoted 1 line

Jeff

cu
Adrian

Signature · 4 lines
       "Is there not promise of rain?" Ling Tan asked suddenly out
        of the darkness. There had been need of rain for many days.
       "Only a promise," Lao Er said.
                                       Pearl S. Buck - Dragon Seed
#81 lore raw

Re: [2.6.11-rc4-mm1 patch] fix buggy IEEE80211_CRYPT_* selects

Quoted 23 lines · Adrian Bunk
Quoted 11 lines · Jeff Garzik
Quoted 9 lines · Adrian Bunk
(quoted diff) +1 -0
+	select CRYPTO

select CRYPTO_AES
---help---
Include software based cipher suites in support of IEEE 802.11i (aka TGi, WPA, WPA2, WPA-PSK, etc.) for use with CCMP enabled networks.

net/ieee80211/Kconfig renamed from net/ieee80211/Kconfig.old +0 -0
@@ -54,10 +55,11 @@
 	"ieee80211_crypt_ccmp".
 
Quoted 8 lines
Quoted 5 lines

config IEEE80211_CRYPT_TKIP
tristate "IEEE 802.11i TKIP encryption"
depends on IEEE80211

(quoted diff) +1 -0
+	select CRYPTO

select CRYPTO_MICHAEL_MIC

'select CRYPTO_AES' should 'select CRYPTO' automatically, I would hope.

Quoted 1 line

This would result in a recursive dependency.

No, it wouldn't. CRYPTO_AES depends on CRYPTO, which depends on nothing.

Jeff

#82 lore raw

Re: [2.6.11-rc4-mm1 patch] fix buggy IEEE80211_CRYPT_* selects

Quoted 25 lines · Jeff Garzik
Quoted 23 lines · Adrian Bunk
Quoted 19 lines · Jeff Garzik
Quoted 13 lines · Adrian Bunk
(quoted diff) +1 -0
+	select CRYPTO

select CRYPTO_AES
---help---
Include software based cipher suites in support of IEEE 802.11i (aka TGi, WPA, WPA2, WPA-PSK, etc.) for use with CCMP enabled networks.

net/ieee80211/Kconfig renamed from net/ieee80211/Kconfig.old +0 -0
@@ -54,10 +55,11 @@
 	"ieee80211_crypt_ccmp".
 

config IEEE80211_CRYPT_TKIP
tristate "IEEE 802.11i TKIP encryption"
depends on IEEE80211

(quoted diff) +1 -0
+	select CRYPTO
Quoted 1 line

select CRYPTO_MICHAEL_MIC

'select CRYPTO_AES' should 'select CRYPTO' automatically, I would hope.

Quoted 4 lines
Quoted 1 line

This would result in a recursive dependency.

No, it wouldn't. CRYPTO_AES depends on CRYPTO, which depends on nothing.

Thing is, CRYPTO_AES on only selectable on x86.

So really, IEEE80211_CRYPT_CCMP should depend upon CRYPTO_AES rather than selecting it. But that confuses users.

#83 lore raw

Re: [2.6.11-rc4-mm1 patch] fix buggy IEEE80211_CRYPT_* selects

Quoted 29 lines · Andrew Morton
Quoted 27 lines · Jeff Garzik
Quoted 25 lines · Adrian Bunk
Quoted 20 lines · Jeff Garzik
Quoted 13 lines · Adrian Bunk
(quoted diff) +1 -0
+	select CRYPTO

select CRYPTO_AES
---help---
Include software based cipher suites in support of IEEE 802.11i (aka TGi, WPA, WPA2, WPA-PSK, etc.) for use with CCMP enabled networks.

net/ieee80211/Kconfig renamed from net/ieee80211/Kconfig.old +0 -0
@@ -54,10 +55,11 @@
 	"ieee80211_crypt_ccmp".
 

config IEEE80211_CRYPT_TKIP
tristate "IEEE 802.11i TKIP encryption"
depends on IEEE80211

(quoted diff) +1 -0
+	select CRYPTO
Quoted 1 line

select CRYPTO_MICHAEL_MIC

'select CRYPTO_AES' should 'select CRYPTO' automatically, I would hope.

Quoted 7 lines
Quoted 4 lines
Quoted 1 line

This would result in a recursive dependency.

No, it wouldn't. CRYPTO_AES depends on CRYPTO, which depends on nothing.

Thing is, CRYPTO_AES on only selectable on x86.

You're thinking about CRYPTO_AES_586. But looking at crypto/Kconfig, the dependencies are a bit weird:

config CRYPTO_AES
tristate "AES cipher algorithms"
depends on CRYPTO && !(X86 && !X86_64)
config CRYPTO_AES_586
tristate "AES cipher algorithms (i586)"
depends on CRYPTO && (X86 && !X86_64)

#84 lore raw

Re: [2.6.11-rc4-mm1 patch] fix buggy IEEE80211_CRYPT_* selects

Quoted 6 lines · Jeff Garzik
Quoted 2 lines

Thing is, CRYPTO_AES on only selectable on x86.

You're thinking about CRYPTO_AES_586. But looking at crypto/Kconfig, the dependencies are a bit weird:

Quoted 6 lines

config CRYPTO_AES
tristate "AES cipher algorithms"
depends on CRYPTO && !(X86 && !X86_64)
config CRYPTO_AES_586
tristate "AES cipher algorithms (i586)"
depends on CRYPTO && (X86 && !X86_64)

That's pretty broken, isn't it?

Would be better to just do:

config CRYPTO_AES

	select CRYPTO_AES_586 if (X86 && !X86_64)
	select CRYPTO_AES_OTHER if !(X86 && !X86_64)

and hide CRYPTO_AES_586 and CRYPTO_AES_OTHER from the outside world.

#85 lore raw

Re: [2.6.11-rc4-mm1 patch] fix buggy IEEE80211_CRYPT_* selects

Quoted 16 lines · Andrew Morton
Quoted 6 lines · Jeff Garzik
Quoted 2 lines

Thing is, CRYPTO_AES on only selectable on x86.

You're thinking about CRYPTO_AES_586. But looking at crypto/Kconfig, the dependencies are a bit weird:

Quoted 6 lines

config CRYPTO_AES
tristate "AES cipher algorithms"
depends on CRYPTO && !(X86 && !X86_64)
config CRYPTO_AES_586
tristate "AES cipher algorithms (i586)"
depends on CRYPTO && (X86 && !X86_64)

That's pretty broken, isn't it?

Quoted 7 lines

Would be better to just do:

config CRYPTO_AES

	select CRYPTO_AES_586 if (X86 && !X86_64)
	select CRYPTO_AES_OTHER if !(X86 && !X86_64)

and hide CRYPTO_AES_586 and CRYPTO_AES_OTHER from the outside world.

http://www.ussg.iu.edu/hypermail/linux/kernel/0502.3/0518.html
http://www.ussg.iu.edu/hypermail/linux/kernel/0502.3/0523.html

cu
Adrian

Signature · 4 lines
       "Is there not promise of rain?" Ling Tan asked suddenly out
        of the darkness. There had been need of rain for many days.
       "Only a promise," Lao Er said.
                                       Pearl S. Buck - Dragon Seed
#86 lore raw

Re: [2.6.11-rc4-mm1 patch] fix buggy IEEE80211_CRYPT_* selects

Quoted 11 lines · Adrian Bunk
Quoted 8 lines

Would be better to just do:

config CRYPTO_AES

	select CRYPTO_AES_586 if (X86 && !X86_64)
	select CRYPTO_AES_OTHER if !(X86 && !X86_64)

and hide CRYPTO_AES_586 and CRYPTO_AES_OTHER from the outside world.

http://www.ussg.iu.edu/hypermail/linux/kernel/0502.3/0518.html

Please resubmit.

#87 lore raw

Re: [2.6.11-rc4-mm1 patch] fix buggy IEEE80211_CRYPT_* selects

In reply to Andrew Morton
Quoted 16 lines · Andrew Morton
Quoted 10 lines · Jeff Garzik
Quoted 1 line

Thing is, CRYPTO_AES on only selectable on x86.

You're thinking about CRYPTO_AES_586. But looking at crypto/Kconfig, the dependencies are a bit weird:

config CRYPTO_AES
tristate "AES cipher algorithms"
depends on CRYPTO && !(X86 && !X86_64)
config CRYPTO_AES_586
tristate "AES cipher algorithms (i586)"
depends on CRYPTO && (X86 && !X86_64)

That's pretty broken, isn't it?

Quoted 7 lines

Would be better to just do:

config CRYPTO_AES

	select CRYPTO_AES_586 if (X86 && !X86_64)
	select CRYPTO_AES_OTHER if !(X86 && !X86_64)

and hide CRYPTO_AES_586 and CRYPTO_AES_OTHER from the outside world.

Not really that easy. For x86 we have

	aes
	aes-586
	aes-via

And my own personal custom-kernel preference is to use the C version of the code on my x86 and x86-64 boxes.

Jeff

#88 lore raw

Re: [2.6.11-rc4-mm1 patch] fix buggy IEEE80211_CRYPT_* selects

Quoted 24 lines · Jeff Garzik
Quoted 23 lines · Andrew Morton
Quoted 11 lines · Jeff Garzik
Quoted 1 line

Thing is, CRYPTO_AES on only selectable on x86.

You're thinking about CRYPTO_AES_586. But looking at crypto/Kconfig, the dependencies are a bit weird:

config CRYPTO_AES
tristate "AES cipher algorithms"
depends on CRYPTO && !(X86 && !X86_64)
config CRYPTO_AES_586
tristate "AES cipher algorithms (i586)"
depends on CRYPTO && (X86 && !X86_64)

That's pretty broken, isn't it?

Would be better to just do:

config CRYPTO_AES

	select CRYPTO_AES_586 if (X86 && !X86_64)
	select CRYPTO_AES_OTHER if !(X86 && !X86_64)
Quoted 7 lines
Quoted 1 line

and hide CRYPTO_AES_586 and CRYPTO_AES_OTHER from the outside world.

Not really that easy. For x86 we have

	aes
	aes-586
	aes-via

Where is aes-via?

Quoted 2 lines

And my own personal custom-kernel preference is to use the C version of the code on my x86 and x86-64 boxes.

That's already not possible today.

Quoted 1 line

Jeff

cu
Adrian

Signature · 4 lines
       "Is there not promise of rain?" Ling Tan asked suddenly out
        of the darkness. There had been need of rain for many days.
       "Only a promise," Lao Er said.
                                       Pearl S. Buck - Dragon Seed
#89 lore raw

Re: [2.6.11-rc4-mm1 patch] fix buggy IEEE80211_CRYPT_* selects

Quoted 29 lines · Adrian Bunk
Quoted 27 lines · Jeff Garzik
Quoted 24 lines · Andrew Morton
Quoted 10 lines · Jeff Garzik
Quoted 1 line

Thing is, CRYPTO_AES on only selectable on x86.

You're thinking about CRYPTO_AES_586. But looking at crypto/Kconfig, the dependencies are a bit weird:

config CRYPTO_AES
tristate "AES cipher algorithms"
depends on CRYPTO && !(X86 && !X86_64)
config CRYPTO_AES_586
tristate "AES cipher algorithms (i586)"
depends on CRYPTO && (X86 && !X86_64)

That's pretty broken, isn't it?

Would be better to just do:

config CRYPTO_AES

	select CRYPTO_AES_586 if (X86 && !X86_64)
	select CRYPTO_AES_OTHER if !(X86 && !X86_64)

and hide CRYPTO_AES_586 and CRYPTO_AES_OTHER from the outside world.

Quoted 8 lines
Quoted 5 lines

Not really that easy. For x86 we have

	aes
	aes-586
	aes-via

Where is aes-via?

drivers/crypto

Quoted 4 lines
Quoted 1 line

And my own personal custom-kernel preference is to use the C version of the code on my x86 and x86-64 boxes.

That's already not possible today.

It should be.

Jeff

#90 lore raw

How to handle the multiple aes variants on i386?

Quoted 15 lines · Jeff Garzik
Quoted 1 line · Adrian Bunk

On Wed, Mar 02, 2005 at 05:41:50PM -0500, Jeff Garzik wrote:

...

Quoted 8 lines
Quoted 5 lines

Not really that easy. For x86 we have

	aes
	aes-586
	aes-via

Where is aes-via?

drivers/crypto

Quoted 7 lines
Quoted 5 lines
Quoted 2 lines

And my own personal custom-kernel preference is to use the C version of the code on my x86 and x86-64 boxes.

That's already not possible today.

It should be.

OK, rethinking about it, your arguments sound reasonable.

Could anyone explain, what exactly happens if multiple "aes" algorithms are compiled into the kernel?

Choosing between the i386 asm and the generic versions seems easy, bug the VIA Padlock case sounds more tricky since it works only on a subset of the i386 architecture.

Quoted 1 line

Jeff

cu
Adrian

Signature · 4 lines
       "Is there not promise of rain?" Ling Tan asked suddenly out
        of the darkness. There had been need of rain for many days.
       "Only a promise," Lao Er said.
                                       Pearl S. Buck - Dragon Seed
#91 lore raw

Re: [2.6.11-rc4-mm1 patch] fix buggy IEEE80211_CRYPT_* selects

In reply to Jeff Garzik
Quoted 24 lines · Jeff Garzik
Quoted 23 lines · Adrian Bunk
Quoted 19 lines · Jeff Garzik
Quoted 13 lines · Adrian Bunk
(quoted diff) +1 -0
+	select CRYPTO

select CRYPTO_AES
---help---
Include software based cipher suites in support of IEEE 802.11i (aka TGi, WPA, WPA2, WPA-PSK, etc.) for use with CCMP enabled networks.

net/ieee80211/Kconfig renamed from net/ieee80211/Kconfig.old +0 -0
@@ -54,10 +55,11 @@
 	"ieee80211_crypt_ccmp".
 

config IEEE80211_CRYPT_TKIP
tristate "IEEE 802.11i TKIP encryption"
depends on IEEE80211

(quoted diff) +1 -0
+	select CRYPTO
Quoted 1 line

select CRYPTO_MICHAEL_MIC

'select CRYPTO_AES' should 'select CRYPTO' automatically, I would hope.

Quoted 3 lines
Quoted 1 line

This would result in a recursive dependency.

No, it wouldn't. CRYPTO_AES depends on CRYPTO, which depends on nothing.

Exactly.

And if CRYPTO_AES would select CRYPTO, you'd have a recursive dependency.

The only possible thing would be to change all dependencies on CRYPTO to selects. This wouldn't be unlogical since the whole crypto subsystem is only a helper for other subsystems.

James, any opinions on this issue?

Quoted 1 line

Jeff

cu
Adrian

Signature · 4 lines
       "Is there not promise of rain?" Ling Tan asked suddenly out
        of the darkness. There had been need of rain for many days.
       "Only a promise," Lao Er said.
                                       Pearl S. Buck - Dragon Seed
#92 lore raw

PATCH 1/1 drivers/scsi/arcmsr/arcmsr.c cleanups

In reply to Andrew Morton
Quoted 7 lines · Andrew Morton

...
Changes since 2.6.11-rc3-mm1:
...
+areca-raid-linux-scsi-driver-fix.patch

New RAID driver (this patch is having a hard life and needs a re-review)
...

This patch contains the following cleanups:
- make needlessly global functions static
- move arcmsr_scsi_host_template from arcmsr.h to arcmsr.c (code doesn't belong into header files)

---

Some notes:
- BOOLEAN/TRUE/FALSE, own get_min/get_max aren't kernel coding style
- the own subdirectory for this driver seems to be overkill
- aren't the "if defined(__x86_64__)" wrong for other 64bit architectures?

 drivers/scsi/arcmsr/arcmsr.c |  110 +++++++++++++++++++++++------------
 drivers/scsi/arcmsr/arcmsr.h |   34 ----------
 2 files changed, 73 insertions(+), 71 deletions(-)
drivers/scsi/arcmsr/arcmsr.h renamed from drivers/scsi/arcmsr/arcmsr.h.old +0 -34
@@ -4802,38 +4802,4 @@
 **        (E) Checksum : checksum of length and status or data byte
 **************************************************************************
 */
-extern int arcmsr_proc_info(struct Scsi_Host *host, char *buffer, char **start,
-			    off_t offset, int length, int inout);
-extern int arcmsr_bios_param(struct scsi_device *sdev,
-			     struct block_device *bdev, sector_t capacity,
-			     int *info);
-extern int arcmsr_release(struct Scsi_Host *);
-extern int arcmsr_queue_command(Scsi_Cmnd * cmd, void (*done) (Scsi_Cmnd *));
-extern int arcmsr_cmd_abort(Scsi_Cmnd *);
-extern int arcmsr_bus_reset(Scsi_Cmnd *);
-extern int arcmsr_ioctl(Scsi_Device * dev, int ioctl_cmd, void *arg);
-extern const char *arcmsr_info(struct Scsi_Host *);
 
-static Scsi_Host_Template arcmsr_scsi_host_template = {
-	.module = THIS_MODULE,
-	.proc_name = "arcmsr",
-	.proc_info = arcmsr_proc_info,
-	.name = "ARCMSR ARECA SATA RAID HOST Adapter" ARCMSR_DRIVER_VERSION,	/* *name */
-	.release = arcmsr_release,
-	.info = arcmsr_info,
-	.ioctl = arcmsr_ioctl,
-	.queuecommand = arcmsr_queue_command,
-	.eh_strategy_handler = NULL,
-	.eh_abort_handler = arcmsr_cmd_abort,
-	.eh_device_reset_handler = NULL,
-	.eh_bus_reset_handler = arcmsr_bus_reset,
-	.eh_host_reset_handler = NULL,
-	.bios_param = arcmsr_bios_param,
-	.can_queue = ARCMSR_MAX_OUTSTANDING_CMD,
-	.this_id = ARCMSR_SCSI_INITIATOR_ID,
-	.sg_tablesize = ARCMSR_MAX_SG_ENTRIES,
-	.max_sectors = ARCMSR_MAX_XFER_SECTORS,
-	.cmd_per_lun = ARCMSR_MAX_CMD_PERLUN,
-	.unchecked_isa_dma = 0,
-	.use_clustering = DISABLE_CLUSTERING,
-};
drivers/scsi/arcmsr/arcmsr.c renamed from drivers/scsi/arcmsr/arcmsr.c.old +73 -37

306 lines not on this page · raw message

#93 lore raw

Re: [2.6.11-rc4-mm1 patch] drivers/scsi/arcmsr/arcmsr.c cleanups

Quoted 2 lines · Adrian Bunk

- aren't the "if defined(__x86_64__)" wrong for other 64bit architectures?

Yes. Having arch or 64bit ifdefs is pretty wrong pretty much always. In one case it's only used to make a typedef a 32bit or 64bit integeger, that should be using unsigned long directly always, but the other uses looks like real problems.

#94 lore raw

PATCH 1/1 drivers/scsi/ch.c: make a struct static

In reply to Andrew Morton

This patch makes a needlessly global struct static.

drivers/scsi/ch.c renamed from drivers/scsi/ch.c.old +1 -1
@@ -118,7 +118,7 @@
 static spinlock_t ch_devlist_lock = SPIN_LOCK_UNLOCKED;
 static int ch_devcount;
 
-struct scsi_driver ch_template =
+static struct scsi_driver ch_template =
 {
 	.owner     	= THIS_MODULE,
 	.gendrv     	= {