Skip to contentSkip to conversation

SVGATextMode on 2.6.11

DISCUSSION Alan Curry 1 participant 1 message Mar 5, 2005

lore
Share & tools
lore

Alan Curry

author
#0 lore raw
Quoted 6 lines · I wrote:

Was SVGATextMode's cursor-setting ability removed as a result of an intentional change, or might it get fixed? Or might CUR_DEFAULT become tunable? Maybe another control sequence could make the current cursor settings the default, like setterm -store does for foreground and background colors.

I found the cause of this new behavior: font loading. SVGATextMode can be configured to load a font with consolechars. It does that after setting the cursor. In 2.6.11 vgacon_adjust_height() was changed to reset the cursor in addition to the font size. The solution is: disable SVGATextMode's font loading, and if you want to change the font, do it before you run SVGATextMode.

The second problem remains a mystery:

Quoted 13 lines

On another note, the resize function of SVGATextMode has been affected strangely too. Sometimes, when resizing the screen to a mode larger than 80x25, the video settings come out correctly but the terminal only uses the first 25 lines, with the bottom of the screen being blank. This one is hard to reproduce. I can reproduce it by doing a full boot (which includes an SVGATextMode call from /etc/rcS.d/S60svgatextmode) followed by a manual SVGATextMode on tty2. The first one works, and the second one screws up the terminal size. When I try to reproduce that series of events without the call from /etc/rcS.d, the problem doesn't show up.

In any case, when that problem _does_ show up, it can be fixed by immediately running the same command again, on the same tty where it just screwed up. And it never fails twice without an intervening reboot.