Pktcdvd and DVD RW drive.
Hello,
I have an
hdc: HL-DT-ST DVDRAM GSA-4120B, ATAPI CD/DVD-ROM drive
from LG. My kernel is a vanilla 2.6.11 with packet writing enabled. I noticed, however, that I can mount and write a CD-RW udf formatted with
# cdrwtool -d /dev/hdc -q
without the need of the pktcdvd driver (with the module unloaded, indeed), simply with
# mount -t udf /dev/hdc /mnt
I thought that this was a property only of DVD+RW and DVDRAM media. Am I missing something here? What is then the use of pktcdvd driver?
Thanks in advice,
Joao Luis M. Assirati.
Quoted 14 lines · Jo?o Luis Meloni Assirati <[email protected]>, on Tue Mar 08, 2005…
Hello,
I have an
hdc: HL-DT-ST DVDRAM GSA-4120B, ATAPI CD/DVD-ROM drive
from LG. My kernel is a vanilla 2.6.11 with packet writing enabled. I noticed, however, that I can mount and write a CD-RW udf formatted with
# cdrwtool -d /dev/hdc -qwithout the need of the pktcdvd driver (with the module unloaded, indeed), simply with
Quoted 7 lines
# mount -t udf /dev/hdc /mntI thought that this was a property only of DVD+RW and DVDRAM media. Am I missing something here? What is then the use of pktcdvd driver?
Thanks in advice,
Joao Luis M. Assirati.
Hi; Well, I have only tested this with dvd+rw (and mount with the
noatime option, to avoid wearing out your media), and it is just *way* to slow, vs. pktcdvd. I gave up on a copy that would have taken a minute or two under pktcdvd after over an hour with just the block device mount.
Of course, pktcdvd gives me and others pretty consistant data
corruption. (see bug 4290 on bugzilla.kernel.org)
ps. others have reported that mt. rainier support works well, and obviates pktcdvd.