Skip to contentSkip to conversation

Problem with MPC8272ADS FCC Ethernet TX at 10 Mb/s half-duplex

U-Boot-Users Martin Jolicoeur 2 participants 2 messages Mar 8, 2005 – Mar 9, 2005

lore
Share & tools
lore
#0 lore raw

We seem to be having a problem with the MPC8272ADS board when connected to a hub (10 Mb/s half-duplex). u-boot is not able to ping anything. As anyone seen this problem? It looks like its a hardware problem (PHY or FCC) but I am curious as anyone been able to use this board with 10 Mb/s half-duplex hub?

Thanks
Martin

__________________________________
Celebrate Yahoo!'s 10th Birthday!
Yahoo! Netrospective: 100 Moments of the Web
http://birthday.yahoo.com/netrospective/

#1 lore raw
Quoted 6 lines · Martin Jolicoeur

We seem to be having a problem with the MPC8272ADS board when connected to a hub (10 Mb/s half-duplex). u-boot is not able to ping anything. As anyone seen this problem? It looks like its a hardware problem (PHY or FCC) but I am curious as anyone been able to use this board with 10 Mb/s half-duplex hub?

Have you been able to ping anything at all under any circumstances? Try a simple cross over cable and see how you go. What makes you think you've got a hardware problem?

Also it seems u-boot defaults to using FCC2 (ie. the second ethernet port) on the MPC8272ADS; are you sure you've got the cable plugged into the right port?

cheers,
Adam