Skip to contentSkip to conversation

ITE8212

DISCUSSION CaT 2 participants 3 messages Mar 10, 2005

lore
Share & tools
lore

CaT

author
#0 lore raw

Well I got my ITE8212 today (only ordered it last night - whee) and here are the happy fun results. Basically the card shoved itself to the front of the queue, gave some weird errors on bootup and had no multisec set on the drives attached to it. I can boot the machine though and am using it right now to route my traffic (amongst other things). Am quite happy to help debug - just need to know what to do. :)

Thanks.

IT8212: IDE controller at PCI slot 0000:00:0d.0
PCI: Found IRQ 11 for device 0000:00:0d.0
IT8212: chipset revision 17
it821x: controller in smart mode.
IT8212: 100% native mode on irq 11

    ide0: BM-DMA at 0x1040-0x1047, BIOS settings: hda:DMA, hdb:pio
    ide1: BM-DMA at 0x1048-0x104f, BIOS settings: hdc:DMA, hdd:pio

Probing IDE interface ide0...
hda: ST3200822A, ATA DISK drive
hda: Performing identify fixups.
ide0 at 0x1050-0x1057,0x1072 on irq 11 Probing IDE interface ide1...
hdc: IC35L060AVV207-0, ATA DISK drive
hdc: Performing identify fixups.
ide1 at 0x1058-0x105f,0x1076 on irq 11
PIIX4: IDE controller at PCI slot 0000:00:14.1
PIIX4: chipset revision 1
PIIX4: not 100% native mode: will probe irqs later

    ide2: BM-DMA at 0x10a0-0x10a7, BIOS settings: hde:DMA, hdf:pio
    ide3: BM-DMA at 0x10a8-0x10af, BIOS settings: hdg:DMA, hdh:DMA

Probing IDE interface ide2...
hde: SAMSUNG SV1022D, ATA DISK drive
ide2 at 0x1f0-0x1f7,0x3f6 on irq 14
Probing IDE interface ide3...
hdg: AOPEN CD-RW CRW3248 1.12 20020417, ATAPI CD/DVD-ROM drive
hdh: QUANTUM FIREBALLlct20 10, ATA DISK drive
ide3 at 0x170-0x177,0x376 on irq 15
hda: max request size: 128KiB
hda: 390721968 sectors (200049 MB) w/8192KiB Cache, CHS=24321/255/63, BUG
hda: cache flushes not supported
hda:hda: recal_intr: status=0x51 { DriveReady SeekComplete Error }
hda: recal_intr: error=0x04 { DriveStatusError }
ide: failed opcode was: unknown
hda1
hdc: max request size: 128KiB
hdc: 120103200 sectors (61492 MB) w/1821KiB Cache, CHS=16383/255/63, BUG
hdc: cache flushes not supported
hdc:hdc: recal_intr: status=0x51 { DriveReady SeekComplete Error }
hdc: recal_intr: error=0x04 { DriveStatusError }
ide: failed opcode was: unknown
hdc1 hdc2
hde: max request size: 128KiB
hde: 19931184 sectors (10204 MB) w/472KiB Cache, CHS=19773/16/63
hde: cache flushes not supported
hde: hde1 hde2 hde3 hde4 < hde5 hde6 hde7 >
hdh: max request size: 128KiB
hdh: 20044080 sectors (10262 MB) w/418KiB Cache, CHS=19885/16/63
hdh: cache flushes not supported
hdh: hdh1 hdh2
hdg: ATAPI 48X CD-ROM CD-R/RW drive, 8192kB Cache

root@nessie:~# hdparm -v /dev/hda

/dev/hda:

 multcount    =  0 (off)
 IO_support   =  0 (default 16-bit)
 unmaskirq    =  0 (off)
 using_dma    =  1 (on)
 keepsettings =  0 (off)
 readonly     =  0 (off)
 readahead    = 256 (on)
 geometry     = 24321/255/63, sectors = 200049647616, start = 0
root@nessie:~# hdparm -v /dev/hdc

/dev/hdc:

 multcount    =  0 (off)
 IO_support   =  0 (default 16-bit)
 unmaskirq    =  0 (off)
 using_dma    =  1 (on)
 keepsettings =  0 (off)
 readonly     =  0 (off)

readahead = 256 (on)
geometry = 16383/255/63, sectors = 61492838400, start = 0

Both drives have a multcount:

/dev/hda:

Model=ST3200822A, FwRev=3.01, SerialNo=3LJ22Y8F
Config={ HardSect NotMFM HdSw>15uSec Fixed DTR>10Mbs RotSpdTol>.5% } RawCHS=16383/16/63, TrkSize=0, SectSize=0, ECCbytes=4 BuffType=unknown, BuffSize=8192kB, MaxMultSect=16, MultSect=off CurCHS=65535/1/63, CurSects=4128705, LBA=yes, LBAsects=268435455 IORDY=on/off
PIO modes: pio0 pio1 pio2
DMA modes: mdma0 mdma1 mdma2
AdvancedPM=no
Drive conforms to: ATA/ATAPI-6 T13 1410D revision 2:

* signifies the current active mode

/dev/hda:

ATA device, with non-removable media

        Model Number:       ST3200822A                              
        Serial Number:      3LJ22Y8F
        Firmware Revision:  3.01    
Standards:
        Used: ATA/ATAPI-6 T13 1410D revision 2 
        Supported: 6 5 4 3 
Configuration:
        Logical         max     current
        cylinders       16383   65535
        heads           16      1
        sectors/track   63      63
        --
        CHS current addressable sectors:    4128705
        LBA    user addressable sectors:  268435455
        LBA48  user addressable sectors:  390721968
        device size with M = 1024*1024:      190782 MBytes
        device size with M = 1000*1000:      200049 MBytes (200 GB)

Capabilities:
LBA, IORDY(can be disabled)
bytes avail on r/w long: 4 Queue depth: 1
Standby timer values: spec'd by Standard, no device specific minimum R/W multiple sector transfer: Max = 16 Current = ? Recommended acoustic management value: 128, current value: 0
DMA: mdma0 mdma1 mdma2 udma0 udma1 udma2 udma3 udma4 *udma5
Cycle time: min=120ns recommended=120ns
PIO: pio0 pio1 pio2 pio3 pio4
Cycle time: no flow control=240ns IORDY flow control=120ns
Commands/features:
Enabled Supported:
* READ BUFFER cmd
* WRITE BUFFER cmd
* Host Protected Area feature set
* Look-ahead
* Write cache
* Power Management feature set
Security Mode feature set
* FLUSH CACHE EXT command
* Mandatory FLUSH CACHE command
* 48-bit Address feature set
SET MAX security extension
Security:
supported
not enabled
not locked
not frozen
not expired: security count
not supported: enhanced erase
HW reset results:
CBLID- above Vih
Device num = 0 determined by CSEL
Checksum: correct

/dev/hdc:

Model=IC35L060AVV207-0, FwRev=V22OA63A, SerialNo=VNVB01G2RAK8XH Config={ HardSect NotMFM HdSw>15uSec Fixed DTR>10Mbs } RawCHS=16383/16/63, TrkSize=0, SectSize=0, ECCbytes=52 BuffType=DualPortCache, BuffSize=1821kB, MaxMultSect=16, MultSect=off CurCHS=16383/16/63, CurSects=16514064, LBA=yes, LBAsects=120103200 IORDY=on/off
PIO modes: pio0 pio1 pio2
DMA modes: mdma0 mdma1 mdma2
AdvancedPM=no
Drive conforms to: ATA/ATAPI-6 T13 1410D revision 3a:

* signifies the current active mode

/dev/hdc:

ATA device, with non-removable media powers-up in standby; SET FEATURES subcmd spins-up.

        Model Number:       IC35L060AVV207-0                        
        Serial Number:      VNVB01G2RAK8XH
        Firmware Revision:  V22OA63A
Standards:
        Used: ATA/ATAPI-6 T13 1410D revision 3a 
        Supported: 6 5 4 3 
Configuration:
        Logical         max     current
        cylinders       16383   16383
        heads           16      16
        sectors/track   63      63
        --
        CHS current addressable sectors:   16514064
        LBA    user addressable sectors:  120103200
        LBA48  user addressable sectors:  120103200
        device size with M = 1024*1024:       58644 MBytes
        device size with M = 1000*1000:       61492 MBytes (61 GB)

Capabilities:
LBA, IORDY(can be disabled)
bytes avail on r/w long: 52 Queue depth: 32
Standby timer values: spec'd by Standard, no device specific minimum R/W multiple sector transfer: Max = 16 Current = 0 Advanced power management level: unknown setting (0x0000) Recommended acoustic management value: 128, current value: 254
DMA: mdma0 mdma1 mdma2 udma0 udma1 udma2 udma3 udma4 *udma5
Cycle time: min=120ns recommended=120ns
PIO: pio0 pio1 pio2 pio3 pio4
Cycle time: no flow control=240ns IORDY flow control=120ns
Commands/features:
Enabled Supported:
* NOP cmd
* READ BUFFER cmd
* WRITE BUFFER cmd
* Host Protected Area feature set
Release interrupt
* Look-ahead
* Write cache
* Power Management feature set
Security Mode feature set
* FLUSH CACHE EXT command
* Mandatory FLUSH CACHE command
* 48-bit Address feature set
Automatic Acoustic Management feature set
SET MAX security extension
Address Offset Reserved Area Boot
SET FEATURES subcommand required to spinup after power up Power-Up In Standby feature set
Advanced Power Management feature set
* General Purpose Logging feature set
Security:
Master password revision code = 65534
supported
not enabled
not locked
not frozen
not expired: security count
not supported: enhanced erase
30min for SECURITY ERASE UNIT.
HW reset results:
CBLID- above Vih
Device num = 0 determined by the jumper
Checksum: correct

Signature · 1 line
    Red herrings strewn hither and yon.
#1 lore raw
Quoted 5 lines · CaT

hda: max request size: 128KiB
hda: 390721968 sectors (200049 MB) w/8192KiB Cache, CHS=24321/255/63, BUG
hda: cache flushes not supported
hda:hda: recal_intr: status=0x51 { DriveReady SeekComplete Error }
hda: recal_intr: error=0x04 { DriveStatusError }

Ooh great stuff, definitely want to know more. A couple of folks report that and mine won't do it.

Quoted 10 lines

/dev/hdc:

Model=IC35L060AVV207-0, FwRev=V22OA63A, SerialNo=VNVB01G2RAK8XH Config={ HardSect NotMFM HdSw>15uSec Fixed DTR>10Mbs } RawCHS=16383/16/63, TrkSize=0, SectSize=0, ECCbytes=52 BuffType=DualPortCache, BuffSize=1821kB, MaxMultSect=16, MultSect=off CurCHS=16383/16/63, CurSects=16514064, LBA=yes, LBAsects=120103200 IORDY=on/off
PIO modes: pio0 pio1 pio2
DMA modes: mdma0 mdma1 mdma2

Ok its correctly trimmed the modes, but not it seems the current mode. I'll send you a tweak to avoid multisect being played with.

author
#2 lore raw
Quoted 9 lines · Alan Cox
Quoted 5 lines · CaT

hda: max request size: 128KiB
hda: 390721968 sectors (200049 MB) w/8192KiB Cache, CHS=24321/255/63, BUG
hda: cache flushes not supported
hda:hda: recal_intr: status=0x51 { DriveReady SeekComplete Error }
hda: recal_intr: error=0x04 { DriveStatusError }

Ooh great stuff, definitely want to know more. A couple of folks report that and mine won't do it.

I've got another one of these cards and it does not display these issues. That box is running 2.6.9-ac10 whilst mine is running 2.6.11-ac2 though and the HD is a western digital whilst my HDs are a Seagate and an IBM. I can't really test on that box (but I can give out any 'doesn't require me to poke it hard' info) as it's in production but my g/w is fine for testing stuff.

Should I be worried about the BUG bit on the hda and hdc lines as above?

Quoted 2 lines

Ok its correctly trimmed the modes, but not it seems the current mode. I'll send you a tweak to avoid multisect being played with.

Cool. BTW I set multisec manually and flipped unmaskirq on and did a copy of 37GB of data from hdc to hda. The promise card used to fail abysmally at this task (either with both drives on the one card or (and this was worse) one drive per card). This fills me with more joy then I can say. I've been wanting to make this box my mail server for yonks and now it looks like I'll be able to. Thanks! :)

/dev/hdc2 39411702 37471662 0 100% /data/share
/dev/hda1 192292124 37610568 144913636 21% /mnt

*dance*

Signature · 1 line
    Red herrings strewn hither and yon.