Skip to contentSkip to conversation

tvtime audio vs pcHDTV-3000 card and pvHDTV-1.6 software

DISCUSSION Gene Heskett 2 participants 3 messages Mar 17, 2005

Subsystems (2)
lore
Share & tools
lore
#0 lore raw

Greetings;

I've spent a goodly part of the last 3 hours rebooting, to find out where this audio control function died, and I think now I can point an accusatory finger at the 2.6.11.2 patch with some degree of certainty.

The scenario goes like this:

reboot to 2.6.11-rc5, everything works flawlessly except the 1394 stuff, that kernel didn't have it built in yet.

reboot to 2.6.11+bk-ieee1394.patch everything works flawlessly

reboot to 2.6.11.1+bk-ieee1394.patch everything works flawlessly

reboot to 2.6.11.2+bk-ieee1394.patch tvtime has no volume control, and the sound gets very very tinny about 1 second after it starts

This scenario continues up to and includeing 2.6.11.4.

So now my next question is, how to I clean up those src trees so that a diff actually outputs only the src code differences, thereby allowing a simple diff -urN (or whatever is the recommended command line to do a recursive diff on the whole maryann) to disclose the real diffs. In other words, is a simple 'make clean' sufficient?

I got the impression from a comment that was made, that quite a body of work was actually done, in the i2c area, that somehow does not show in the changelog, nor in that simple little 10 line patch that was 2.6.11.2. And how that little patch could be responsible for breaking this boggles what tiny little miniscule piece of a mind I have left at this point.

If thats the case, then how did it get into my src code tree since the exact same 2.6.11.tar.gz was used as the base for applying each of the incrementals to each of the src trees I now have sitting in /usr/src? Good question that...

Unforch, the 2.6.11 plain tree has not, in this case been built yet as it got accidently nuked by a missfire of my 'buildit26' script, which normally moves a base version tree out of the way before it unpacks a fresh copy, and then renames that tree to be the current version and then restores the base tree to its original name.

Thats not the one I want to use as the 'gold standard' anyway. 2.6.11.1 works, and 2.6.11.2 doesn't. So at this point, 2.6.11.1 is the 'gold standard'.

But, both the 2.6.11.1 and the 2.6.11.2 trees are as built, and the diff I got was far larger than forgetting to apply the bk-ieee1394.patch to one of them would account for. Many tens of kilobytes in fact.

Please throw me a bone here folks.

Signature · 8 lines
Cheers, Gene
"There are four boxes to be used in defense of liberty:
 soap, ballot, jury, and ammo. Please use in that order."
-Ed Howdershelt (Author)
99.34% setiathome rank, not too shabby for a WV hillbilly
Yahoo.com and AOL/TW attorneys please note, additions to the above
message by Gene Heskett are:
Copyright 2005 by Maurice Eugene Heskett, all rights reserved.
#1 lore raw

Heavens, no need to clean the tree at all. Just add "-X <file> to your diff. I have attached what I use for <file>. It is likely over kill, but should do...

-g

Quoted 31 lines · Gene Heskett

Greetings;

I've spent a goodly part of the last 3 hours rebooting, to find out where this audio control function died, and I think now I can point an accusatory finger at the 2.6.11.2 patch with some degree of certainty.

The scenario goes like this:

reboot to 2.6.11-rc5, everything works flawlessly except the 1394 stuff, that kernel didn't have it built in yet.

reboot to 2.6.11+bk-ieee1394.patch everything works flawlessly

reboot to 2.6.11.1+bk-ieee1394.patch everything works flawlessly

reboot to 2.6.11.2+bk-ieee1394.patch tvtime has no volume control, and the sound gets very very tinny about 1 second after it starts

This scenario continues up to and includeing 2.6.11.4.

So now my next question is, how to I clean up those src trees so that a diff actually outputs only the src code differences, thereby allowing a simple diff -urN (or whatever is the recommended command line to do a recursive diff on the whole maryann) to disclose the real diffs. In other words, is a simple 'make clean' sufficient?

I got the impression from a comment that was made, that quite a body of work was actually done, in the i2c area, that somehow does not show in the changelog, nor in that simple little 10 line patch that was 2.6.11.2. And how that little patch could be responsible for breaking this boggles what tiny little miniscule piece of a mind I have left at this point.

If thats the case, then how did it get into my src code tree since the exact same 2.6.11.tar.gz was used as the base for applying each of the incrementals to each of the src trees I now have sitting in /usr/src? Good question that...

Unforch, the 2.6.11 plain tree has not, in this case been built yet as it got accidently nuked by a missfire of my 'buildit26' script, which normally moves a base version tree out of the way before it unpacks a fresh copy, and then renames that tree to be the current version and then restores the base tree to its original name.

Thats not the one I want to use as the 'gold standard' anyway. 2.6.11.1 works, and 2.6.11.2 doesn't. So at this point, 2.6.11.1 is the 'gold standard'.

But, both the 2.6.11.1 and the 2.6.11.2 trees are as built, and the
diff I got was far larger than forgetting to apply the bk-ieee1394.patch to one of them would account for. Many tens of kilobytes in fact.

Please throw me a bone here folks.

Signature · 2 lines
George Anzinger   [email protected]
High-res-timers:  http://sourceforge.net/projects/high-res-timers/

*.o
*.i
.*
*.*~
*~
*.rej
*.orig
*.orig.*
#*
*#
*.ver
ETAGS
TAGS
tags
*.map
*.s
*.a
*X
*Y

*.*X
*.*Y
SCCS
CVS
*.*,*
dwarf2-defs.h
kconfig
configs.c
defconfig
mkdep
split-include
tkparse
vmlinux
consolemap_deftbl.c
tkparse.c
classlist.h
crc32table.h
devlist.h
config
autoconf.h
compile.h
version.h
kconfig.tk
soundmodem
defkeymap.c
patest
asm
boot
conmakehash
gen-devlist
modversions.h
elfconfig.h
asm_offsets.h
*.old
cscope.*
*.so
gen_crc32table
docproc
fixdep
kallsyms
mk_elfconfig
modpost
pnmtologo
initramfs_data.*
gen_init_cpio

#2 lore raw

Success! was Re: tvtime audio vs pcHDTV-3000 card and pvHDTV-1.6 software

In reply to Gene Heskett
Quoted 2 lines · Gene Heskett

Greetings;

Here I go, talking to myself again. Please read on.

Quoted 47 lines

I've spent a goodly part of the last 3 hours rebooting, to find out where this audio control function died, and I think now I can point an accusatory finger at the 2.6.11.2 patch with some degree of certainty.

The scenario goes like this:

reboot to 2.6.11-rc5, everything works flawlessly except the 1394 stuff, that kernel didn't have it built in yet.

reboot to 2.6.11+bk-ieee1394.patch everything works flawlessly

reboot to 2.6.11.1+bk-ieee1394.patch everything works flawlessly

reboot to 2.6.11.2+bk-ieee1394.patch tvtime has no volume control, and the sound gets very very tinny about 1 second after it starts

This scenario continues up to and includeing 2.6.11.4.

So now my next question is, how to I clean up those src trees so that a diff actually outputs only the src code differences, thereby allowing a simple diff -urN (or whatever is the recommended command line to do a recursive diff on the whole maryann) to disclose the real diffs. In other words, is a simple 'make clean' sufficient?

I got the impression from a comment that was made, that quite a body of work was actually done, in the i2c area, that somehow does not show in the changelog, nor in that simple little 10 line patch that was 2.6.11.2. And how that little patch could be responsible for breaking this boggles what tiny little miniscule piece of a mind I have left at this point.

If thats the case, then how did it get into my src code tree since the exact same 2.6.11.tar.gz was used as the base for applying each of the incrementals to each of the src trees I now have sitting in /usr/src? Good question that...

Unforch, the 2.6.11 plain tree has not, in this case been built yet as it got accidently nuked by a missfire of my 'buildit26' script, which normally moves a base version tree out of the way before it unpacks a fresh copy, and then renames that tree to be the current version and then restores the base tree to its original name.

Thats not the one I want to use as the 'gold standard' anyway. 2.6.11.1 works, and 2.6.11.2 doesn't. So at this point, 2.6.11.1 is the 'gold standard'.

Quoted 6 lines

But, both the 2.6.11.1 and the 2.6.11.2 trees are as built, and the diff I got was far larger than forgetting to apply the bk-ieee1394.patch to one of them would account for. Many tens of kilobytes in fact.

Please throw me a bone here folks.

Pursuant to checking out that it was 2.6.11.2 that broke it, I just built and rebooted to a 2.6.11.5 kernel, but without the 2.6.11.2 patch.

It all works exactly as it should!!!!!!!!

So now the $64K question is, how could this little patch screw that up so frigging bad?
----------------------

Makefile 2005-03-09 00:13:29 -08:00 +1 -1
diff -Nru a/Makefile b/Makefile
@@ -1,7 +1,7 @@
 VERSION = 2
 PATCHLEVEL = 6
 SUBLEVEL = 11
-EXTRAVERSION = .1
+EXTRAVERSION = .2
 NAME=Woozy Numbat
 
 # *DOCUMENTATION*
fs/eventpoll.c 2005-03-09 00:13:29 -08:00 +1 -0
diff -Nru a/fs/eventpoll.c b/fs/eventpoll.c
@@ -619,6 +619,7 @@
  return error;
 }
 
+#define MAX_EVENTS (INT_MAX / sizeof(struct epoll_event))
 
 /*
  * Implement the event wait interface for the eventpoll file. It is 

the kernel
@@ -635,7 +636,7 @@

        current, epfd, events, maxevents, timeout));

/* The maximum number of event must be greater than zero */
- if (maxevents <= 0)
+ if (maxevents <= 0 || maxevents > MAX_EVENTS) return -EINVAL;

/* Verify that the area passed by the user is writeable */
------------------
And this patch looks perfectly good and proper to me IF indeed MAX_EVENTS is properly defined as some positive value. I personally don't write code that doesn't check both ends of a boundary condition, in C or assembly. Did anybody stick a printk in there to check?

Call me whatever, but leaving out the above patch fixes it right up. My guess is that somehow, MAX_EVENTS is not being properly declared? And why didn't it bother a whole bunch of stuff in that case? Why just tvtime?

A side comment on the 9 piece 2.6.11.5 kit from earlier this evening which I merged into one file and applied. Nobody fixed the Makefile, so I had to build it twice. Minor nit, but I wonder how many others rebooted to it to be greated by a dozen screens full of missing modules messages scrolling by at around 10+33rd fenceposts per mile. :)

Signature · 8 lines
Cheers, Gene
"There are four boxes to be used in defense of liberty:
 soap, ballot, jury, and ammo. Please use in that order."
-Ed Howdershelt (Author)
99.34% setiathome rank, not too shabby for a WV hillbilly
Yahoo.com and AOL/TW attorneys please note, additions to the above
message by Gene Heskett are:
Copyright 2005 by Maurice Eugene Heskett, all rights reserved.