Linux 2.4.30-rc1
Here goes the first release candidate for v2.4.30.
It contains a small number of fixes, including a fix for recently discovered ppp DoS (CAN-2005-0384).
Summary of changes from v2.4.30-pre3 to v2.4.30-rc1
============================================
<crn:netunix.com>:
o [SPARC32]: Fix build dependencies for vmlinux.o
o [SPARC32]: Fix sun4d sbus and current handling
o [SPARC32]: sun4d needs ZS_WSYNC() zilog reg flushing too
<davem:northbeach.davemloft.net.davemloft.net>:
o [SPARC64]: Fix semtimedop compat ipc code
<jacques_basson:myrealbox.com>:
o Fix softdog no reboot on unexpected close
Alan Hourihane:
o agpgart Intel i915GM ID's and tweaks
Andrea Arcangeli:
o Write throttling should not take free highmem into account
Chris Wedgwood:
o early boot code references check_acpi_pci()
Linus Torvalds:
o Workaround possible pty line discipline race
Marcelo Tosatti:
o Andrea Arcangeli: get_user_pages() shall not grab PG_reserved pages
o Paul Mackerras: Remote Linux DoS on ppp servers (CAN-2005-0384)
o Change VERSION to 2.4.30-rc1
Roland McGrath:
o i386/x86_64 fpu: fix x87 tag word simulation using fxsave
Solar Designer:
o Enable gcc warnings for vsprintf/vsnprintf with "format" attribute
Stephen Hemminger:
o TCP BIC not binary searching correctly
Willy Tarreau:
o acpi.h needs <linux/init.h>
Hi Marcelo,
2.4.30-rc1 works fine here on athlon-SMP and sparc64-smp. BTW, the athlon uses the e1000 driver (which has been updated since 2.4.29) with no trouble at all.
I'll post a 2.4.29-hf5 in a few hours, just the time to put the thing online, it already builds on the same machines.
Cheers,
Willy
Hi Marcelo,
Quoted 3 lines · Marcelo Tosatti
Here goes the first release candidate for v2.4.30.
drivers/pci/pci.ids is lagging http://pciids.sourceforge.net/pci.ids
by a fair amount, >6300 lines diff
I don't know policy on this reference, just tracked a change in kernel didn't reflect in lspci and discovered kernel and pciutils have their own copies of pci.ids file.
Grant.
Quoted 5 lines · Grant Coady
Hi Marcelo,
Quoted 2 lines · Marcelo Tosatti
Quoted 8 lines
Quoted 1 line
Here goes the first release candidate for v2.4.30.
drivers/pci/pci.idsis lagging http://pciids.sourceforge.net/pci.ids
by a fair amount, >6300 lines diffI don't know policy on this reference, just tracked a change in kernel didn't reflect in lspci and discovered kernel and pciutils have their own copies of pci.ids file.
Martin Mares used to maintain pci.ids list in v2.4, last update was long ago:
[email protected], 2002-08-14 18:34:28-03:00, [email protected]
[PATCH] pci.ids for 2.4.20-pre2
Hi Marcelo,
After a long sleep, I'm sending another batch of PCI ID's. These include entries accumulated sent to me in past few months and also ID's having appeared in 2.5.x.
I dont have a problem with pci.ids additions given there is a demand for it.
Hello,
Quoted 3 lines · Marcelo Tosatti
Here goes the first release candidate for v2.4.30.
I'm a bit late, but here's a patch that fixes a module parameter description typo in eepro100. The problem was located in the 2.6 source and a fix should be in 2.6-mm soon.
Thanks.
/ magnus
drivers/net/eepro100.c +2 -2
@@ -153,8 +153,8 @@MODULE_PARM_DESC (congenb,"Enable congestion control (1)" );MODULE_PARM_DESC (txfifo,"Tx FIFO threshold in 4 byte units, (0-15)" );MODULE_PARM_DESC (rxfifo,"Rx FIFO threshold in 4 byte units, (0-15)" ); -MODULE_PARM_DESC (txdmaccount,"Tx DMA burst length; 128 - disable (0-128)" ); -MODULE_PARM_DESC (rxdmaccount,"Rx DMA burst length; 128 - disable (0-128)" ); +MODULE_PARM_DESC (txdmacount,"Tx DMA burst length; 128 - disable (0-128)" ); +MODULE_PARM_DESC (rxdmacount,"Rx DMA burst length; 128 - disable (0-128)" );MODULE_PARM_DESC (rx_copybreak,"copy breakpoint for copy-only-tiny-frames" );MODULE_PARM_DESC (max_interrupt_work,"maximum events handled per interrupt" );MODULE_PARM_DESC (multicast_filter_limit,"maximum number of filtered multicast addresses" );