USB glitches after suspend on ppc
Hi,
There are known issues with USB after suspend/resume (D3 hot) on powerpc. For example, plugging or unplugging devices during sleep results in oopses at resume; and one time out of two, the USB ports are unpowered on resume (because the registers think they are, and linux doesn't repower them. but they're not).
Both of these issues have patches available, patches that can be found there for example:
http://colino.net/ibookg4/usb-ohci-fixes.patch
http://colino.net/ibookg4/usb-ehci-power.patch
What kind of work on these is needed so that they get in?
Thanks,
Signature · 1 line
Colin
Quoted 4 lines · Colin Leroy
Hi,
There are known issues with USB after suspend/resume (D3 hot) on powerpc.
Also known fixes to some of them, which haven't yet been merged. I'll repost these as followups to this message, to linux-usb-devel and CC Colin. They're in the 2.6.12-rc2-mm1 patchset.
To my understanding, such issues have been around for some time now, although recent kernels have tossed monkey wrenches into several other cases that previously worked just fine. (Ergo those nyet-merged patches...)
Quoted 5 lines
For example, plugging or unplugging devices during sleep results in oopses at resume; and one time out of two, the USB ports are unpowered on resume (because the registers think they are, and linux doesn't repower them. but they're not).
Quoted 7 lines
Both of these issues have patches available, patches that can be found there for example:
http://colino.net/ibookg4/usb-ohci-fixes.patch
http://colino.net/ibookg4/usb-ehci-power.patchWhat kind of work on these is needed so that they get in?
Briefly, given 2.6.12-rc2 plus the patches mentioned above, find out what else is needed.
* The first of them is Paul's patch, and I never got a response to the questions I asked him about it.
- 2.6.12-rc2 does have the fix to check for HC_STATE_QUIESCING, which should supplant the need for a new "suspending" quirk.
- And the first of those patches waiting merge does update the handling of IRQs in the PCI-to-USB glue.
- So the main change from that patch which is unresolved is moving the PMAC-specific stuff up from the OHCI code into into the the usb/core/hcd-pci code. Presumably you could do that? I assume that it really is needed at that layer, though it'll only relate to OHCI cells on Apple ASICs.
* As for the second, that looks to be a hardware-specfic issue that just wouldn't reproduce with the controllers I was using for PM testing. What I'll do is wrap up an equivalent fix with some related EHCI updates for power switching, post that, and ask you to verify that it works (probably simplest to do that with OHCI non-modular and not loaded).
How's that sound?
- Dave
On 05 Apr 2005 at 13h04, David Brownell wrote:
Hi,
Quoted 44 lines
Quoted 2 lines
There are known issues with USB after suspend/resume (D3 hot) on powerpc.
Also known fixes to some of them, which haven't yet been merged. I'll repost these as followups to this message, to linux-usb-devel and CC Colin. They're in the 2.6.12-rc2-mm1 patchset.
To my understanding, such issues have been around for some time now, although recent kernels have tossed monkey wrenches into several other cases that previously worked just fine. (Ergo those nyet-merged patches...)
Quoted 5 lines
For example, plugging or unplugging devices during sleep results in oopses at resume; and one time out of two, the USB ports are unpowered on resume (because the registers think they are, and linux doesn't repower them. but they're not).
Quoted 7 lines
Both of these issues have patches available, patches that can be found there for example:
http://colino.net/ibookg4/usb-ohci-fixes.patch
http://colino.net/ibookg4/usb-ehci-power.patchWhat kind of work on these is needed so that they get in?
Briefly, given 2.6.12-rc2 plus the patches mentioned above, find out what else is needed.
* The first of them is Paul's patch, and I never got a response to the questions I asked him about it.
- 2.6.12-rc2 does have the fix to check for
HC_STATE_QUIESCING, which should supplant the need for a new "suspending" quirk.- And the first of those patches waiting merge does update the handling of IRQs in the PCI-to-USB glue.
- So the main change from that patch which is unresolved is moving the PMAC-specific stuff up from the OHCI code into into the the usb/core/hcd-pci code. Presumably you could do that? I assume that it really is needed at that layer, though it'll only relate to OHCI cells on Apple ASICs.
Quoted 8 lines
* As for the second, that looks to be a hardware-specfic issue that just wouldn't reproduce with the controllers I was using for PM testing. What I'll do is wrap up an equivalent fix with some related EHCI updates for power switching, post that, and ask you to verify that it works (probably simplest to do that with OHCI non-modular and not loaded).
How's that sound?
Nice :)
Ok, here are the results of my tests with 2.6.12-rc2 and the patches you sent me applied:
- plug USB device, sleep, unplug USB device, resume: no more oops
- sleep, plug in USB device: no oops, but it wakes the laptop up for a few seconds; then, it goes back to sleep. No oops on second resume. I can live with that :)
- once out of two resumes, resume leaves the ports unpowered; so I still need my usb-ehci-power.patch that re-powers ports unconditionnaly.
Signature · 1 line
Colin
Quoted 11 lines · Colin Leroy
Quoted 7 lines · David Brownell
Quoted 2 lines
What kind of work on these is needed so that they get in?
Briefly, given 2.6.12-rc2 plus the patches mentioned above, find out what else is needed.
...
How's that sound?Nice :)
Quoted 7 lines
Ok, here are the results of my tests with 2.6.12-rc2 and the patches you sent me applied:
- plug USB device, sleep, unplug USB device, resume: no more oops
- sleep, plug in USB device: no oops, but it wakes the laptop up for a few seconds; then, it goes back to sleep. No oops on second resume. I can live with that :)
Interesting. Looks like pci_enable_wake(dev, state, 0) isn't actually disabling wakeup on your hardware. (Assuming CONFIG_USB_SUSPEND=n; if not, then it's odd that the system went back to sleep!) Do you think that might be related to those calls manipulating the Apple ASICs being in the OHCI layer rather than up nearer the generic PCI glue? (I still think they don't belong in USB code -- ohci or usbcore -- at all. If the platform-specific PCI hooks don't suffice, they need fixing.)
Thanks for the testing update. I'm glad to know that there seems to be only one (minor) glitch that's PPC-specific!
Quoted 2 lines
- once out of two resumes, resume leaves the ports unpowered; so I still need my usb-ehci-power.patch that re-powers ports unconditionnaly.
OK, I just posted the patch cleaning up EHCI port power switching; that should remove the need for that separate patch. (As well as fixing some minor annoyances.)
- Dave
Quoted 8 lines
Interesting. Looks like
pci_enable_wake(dev, state, 0)isn't actually disabling wakeup on your hardware. (AssumingCONFIG_USB_SUSPEND=n; if not, then it's odd that the system went back to sleep!) Do you think that might be related to those calls manipulating the Apple ASICs being in the OHCI layer rather than up nearer the generic PCI glue? (I still think they don't belong in USB code -- ohci or usbcore -- at all. If the platform-specific PCI hooks don't suffice, they need fixing.)
There are no platform hooks in the right place for now afaik. Anyway, I think Colin's controller is an OHCI/EHCI NEC chip, so not an Apple ASIC, it's not doing anything in those calls.
Quoted 2 lines
Thanks for the testing update. I'm glad to know that there seems to be only one (minor) glitch that's PPC-specific!
Which is just an off-the-shelves NEC EHCI chip.
Quoted 10 lines
Quoted 2 lines
- once out of two resumes, resume leaves the ports unpowered; so I still need my usb-ehci-power.patch that re-powers ports unconditionnaly.
OK, I just posted the patch cleaning up EHCI port power switching; that should remove the need for that separate patch. (As well as fixing some minor annoyances.)
- Dave
Signature · 1 line
Benjamin Herrenschmidt <[email protected]>
Quoted 5 lines · Benjamin Herrenschmidt
Quoted 3 lines
Thanks for the testing update. I'm glad to know that there seems to be only one (minor) glitch that's PPC-specific!
Which is just an off-the-shelves NEC EHCI chip.
The wakeup-after-suspend hasn't been reported by anyone else.
Quoted 8 lines · David Brownell
Quoted 5 lines · Benjamin Herrenschmidt
Quoted 3 lines
Thanks for the testing update. I'm glad to know that there seems to be only one (minor) glitch that's PPC-specific!
Which is just an off-the-shelves NEC EHCI chip.
The wakeup-after-suspend hasn't been reported by anyone else.
Looks like the root hub is set for triggering wakeups on connect, isn't that just a setting in there ? The old Apple ASIC had a bit somewhere to control that, but I don't know about the NEC
Ben.
Quoted 6 lines · Benjamin Herrenschmidt
Quoted 5 lines · David Brownell
Quoted 4 lines · Benjamin Herrenschmidt
Quoted 3 lines
Thanks for the testing update. I'm glad to know that there seems to be only one (minor) glitch that's PPC-specific!
Quoted 7 lines
Quoted 3 lines
Quoted 1 line
Which is just an off-the-shelves NEC EHCI chip.
The wakeup-after-suspend hasn't been reported by anyone else.
Looks like the root hub is set for triggering wakeups on connect, isn't that just a setting in there ? The old Apple ASIC had a bit somewhere to control that, but I don't know about the NEC
The NEC chip uses PME# for PCI wakeup, which pci_enable_wake(..., 0) is supposed to have disabled. If it's not disabling PME#, that's a bug in the PCI infrastructure on that platform. If some other signal is causing a wakeup, that's a different platform-specific issue. :)
Quoted 10 lines · On Thu, 07 Apr 2005 09:02:57 +1000 Benjamin Herrenschmidt…
Quoted 8 lines
Interesting. Looks like
pci_enable_wake(dev, state, 0)isn't actually disabling wakeup on your hardware. (AssumingCONFIG_USB_SUSPEND=n; if not, then it's odd that the system went back to sleep!) Do you think that might be related to those calls manipulating the Apple ASICs being in the OHCI layer rather than up nearer the generic PCI glue? (I still think they don't belong in USB code -- ohci or usbcore -- at all. If the platform-specific PCI hooks don't suffice, they need fixing.)There are no platform hooks in the right place for now afaik.
Nope, not in upstream, but I used the ohci patch from Paul Mackerras previously.
Quoted 2 lines
Anyway, I think Colin's controller is an OHCI/EHCI NEC chip, so not an Apple ASIC, it's not doing anything in those calls.
Signature · 1 line
Colin
Quoted 3 lines · On Wed, 6 Apr 2005 13:11:53 -0700 David Brownell <[email protected]> wrote:
Interesting. Looks like
pci_enable_wake(dev, state, 0)isn't actually disabling wakeup on your hardware. (AssumingCONFIG_USB_SUSPEND=n; if not, then it's odd that the system went back to sleep!)
Yes, CONFIG_USB_SUSPEND is disabled here.
Quoted 3 lines
Do you think
that might be related to those calls manipulating the Apple ASICs being in the OHCI layer rather than up nearer the generic PCI glue?
To be honest, I don't really know :)
Quoted 2 lines
Thanks for the testing update. I'm glad to know that there seems to be only one (minor) glitch that's PPC-specific!
Yup, me too, I consider it working quite well now :)
Quoted 3 lines
OK, I just posted the patch cleaning up EHCI port power switching; that should remove the need for that separate patch. (As well as fixing some minor annoyances.)
Seen that, thanks.
Signature · 1 line
Colin