Cannot get any response from serial port

 
 
Dear everyone,

I compiled U-Boot for my SMDK2410 Board(made by Samsung),

$ make smdk2410_config
$ make all
Then , I wrote u-boot.bin to flash(SMDK2410:K9S1208 64MB).
I used kermit??115200??8IN1,No,No) , but I cannot get any response from serial port at my terminal. But when I used vivi as bootloader before , and use command 'kermit -c', then I get information at console. That is why ?
Any suggestions is welcome , thanks !

Dear Wolfgang Denk , thank you for your advice and I use ELDK to compile U-Boot ,and it works well ! But I beg your pardon that you told me not to post HTML to this mailing list but it seems I cannot stop it . I sent a mail to my friend and he told me that there was no any HTML in my mail . I don't know why there are those codes in my mail when I sent mails to this list . Maybe they are added by my mail-box service provider . Anyway , I hope you can forgive me ! And I really appreciate what you have done for me .

Best Wishes,
Kenton Lau

-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.denx.de/pipermail/u-boot/attachments/20050408/73ec2b76/attachment.htm