Skip to contentSkip to conversation

formatting CD-RW locks the system

DISCUSSION Stas Sergeev 3 participants 4 messages Apr 10, 2005 – Apr 11, 2005

lore
Share & tools
lore
#0 lore raw

Hello.

I am trying to format the CD-RW disc on my NEC ND-3520A DVD writer, and the results are completely unexpected: I do cdrwtool -d /dev/cdrom -q
It proceeds with the formatting, but while it does so, the system is pretty much dead. It can do some trivial tasks like the console switching, but as soon as it comes to any disc I/O, the processes are hanging. After the formatting is done, the system is back alive. That reminds me formatting the floppies under DOS in those ancient times, with the only difference that formatting a floppy takes ~2 minutes, while formatting a CD-RW takes ~20 minutes, which is not good at all.
Is this something known or a bug?
I tried that on a 2.6.11-rc3-mm2 and on a 2.6.12-rc1 kernels.

Also, is there any way to use the packet writing with the CD-R/DVD-R discs, or is it supposed to work only with the -RW discs?

#1 lore raw
Quoted 22 lines · you

Hello.

I am trying to format the CD-RW disc on my NEC ND-3520A DVD writer, and the results are completely unexpected: I do cdrwtool -d /dev/cdrom -q
It proceeds with the formatting, but while it does so, the system is pretty much dead. It can do some trivial tasks like the console switching, but as soon as it comes to any disc I/O, the processes are hanging. After the formatting is done, the system is back alive. That reminds me formatting the floppies under DOS in those ancient times, with the only difference that formatting a floppy takes ~2 minutes, while formatting a CD-RW takes ~20 minutes, which is not good at all.
Is this something known or a bug?
I tried that on a 2.6.11-rc3-mm2 and on a 2.6.12-rc1 kernels.

Quoted 4 lines

Also, is there any way to use the packet writing with the CD-R/DVD-R discs, or is it supposed to work only with the -RW discs?

You probably don't have DMA enabled on the drive. Please check this.

CDRW formatting works fine here with cdrecord blank=all

Signature · 8 lines
Cheers,
Alistair.

personal:   alistair()devzero!co!uk
university: s0348365()sms!ed!ac!uk
student:    CS/CSim Undergraduate
contact:    1F2 55 South Clerk Street,
            Edinburgh. EH8 9PP.
#2 lore raw
Quoted 23 lines · Alistair John Strachan
Quoted 22 lines · you

Hello.

I am trying to format the CD-RW disc on my NEC ND-3520A DVD writer, and the results are completely unexpected: I do cdrwtool -d /dev/cdrom -q
It proceeds with the formatting, but while it does so, the system is pretty much dead. It can do some trivial tasks like the console switching, but as soon as it comes to any disc I/O, the processes are hanging. After the formatting is done, the system is back alive. That reminds me formatting the floppies under DOS in those ancient times, with the only difference that formatting a floppy takes ~2 minutes, while formatting a CD-RW takes ~20 minutes, which is not good at all.
Is this something known or a bug?
I tried that on a 2.6.11-rc3-mm2 and on a 2.6.12-rc1 kernels.

Quoted 8 lines
Quoted 4 lines

Also, is there any way to use the packet writing with the CD-R/DVD-R discs, or is it supposed to work only with the -RW discs?

You probably don't have DMA enabled on the drive. Please check this.

CDRW formatting works fine here with cdrecord blank=all

Excuse me, but did I miss a major left turn in the operations of a disk control system here someplace?

Every disk system I have ever delt with, has as a default, (and I've walked around in a couple of them at the assembly language level) the assumption that if track 0 is to be formatted, then the whole device is assumed to be needing formatted, and every filesystem I've ever screwed with will do exactly that. Often, but not always, that can actually be offloaded to the device itself if its smart enough, and the operating system itself can go on about its business, whether its you composing a letter to your aunt Tilly or whatever.

IDE/ATAPI drives have been cheerfully ignoreing format messages from the OS now for what, 12 years now unless backed up by super secret code word access to such builtin functions of the drive, only possessed by the factory technicians who do have the tools to control the track spaceings and data densities on the surfaces etc etc?

Scsi drives have been reporting the success of the formatting operation in just a few milliseconds for even longer simply because they take care of their own errors long before the os is aware the drive may be having problems? The last time I formatted a scsi drive under nitros9, the format took 10 milliseconds, but the logical installation of the filesystem took another 3 hours, mainly because nitros9 uses a 256 byte sector.

Its possible the cd-rw folks seem to have fallen off the wagon here, but really, a disk operating system (and the average cd-rw or dvd-rw drive should be capable of doing that with no further intervention from the OS itself unless you want some sort of a non-standard formatting done as in the nitros0 situation.

Are the firmwares of modern cd/dvd writers actualy dumb enough they need the OS's help for that? If the answer is yes, lord help us.

Signature · 8 lines
Cheers, Gene
"There are four boxes to be used in defense of liberty:
 soap, ballot, jury, and ammo. Please use in that order."
-Ed Howdershelt (Author)
99.34% setiathome rank, not too shabby for a WV hillbilly
Yahoo.com and AOL/TW attorneys please note, additions to the above
message by Gene Heskett are:
Copyright 2005 by Maurice Eugene Heskett, all rights reserved.
#3 lore raw
In reply to Alistair John Strachan

Hello.

Quoted 1 line · Alistair John Strachan

You probably don't have DMA enabled on the drive. Please check this.

It looks enabled. And even if it didn't, such a behaviour would still be strange.

# hdparm -v /dev/cdrom

/dev/cdrom:
HDIO_GET_MULTCOUNT failed: Invalid argument

IO_support   =  1 (32-bit)
unmaskirq    =  1 (on)
using_dma    =  1 (on)
keepsettings =  0 (off)
readonly     =  0 (off)

readahead = 256 (on)
HDIO_GETGEO failed: Invalid argument

Quoted 1 line

CDRW formatting works fine here with cdrecord blank=all

OK, I'll try cdrecord too, thanks. But there might be a bug in the kernel if the system literally dies with the cdrwtool.