invalid physical volume
I'm running lvm-1.0.8-9 on RHES3 and am receiving the following when I try to utilize a volume from an EMC array:
# pvcreate /dev/emcpowera pvcreate -- invalid physical volume "/dev/emcpowera"
The OS sees the volume fine:
# fdisk -l /dev/emcpowera Disk /dev/emcpowera: 10.7 GB, 10737418240 bytes 255 heads, 63 sectors/track, 1305 cylinders Units = cylinders of 16065 * 512 = 8225280 bytes
I can create a partition and then a filesystem without issue, but I really need to use it within LVM.
Any ideas?
Clif try to make a partition type linux lvm.. (8e) and after try pvcreate over it
send a output of pvcreate -v /dev/emcpowera
if you complile with debug use pvcreate -dv /dev/emcpowera
send the error leve returns echo $?
regards!
On Mon, 11 Apr 2005 21:52:08 -0500, Clif Smith wrote
Quoted 14 lines
I'm running lvm-1.0.8-9 on RHES3 and am receiving the following when I try to utilize a volume from an EMC array:
# pvcreate /dev/emcpowera pvcreate -- invalid physical volume "/dev/emcpowera"The OS sees the volume fine:
# fdisk -l /dev/emcpowera Disk /dev/emcpowera: 10.7 GB, 10737418240 bytes 255 heads, 63 sectors/track, 1305 cylinders Units = cylinders of 16065 * 512 = 8225280 bytesI can create a partition and then a filesystem without issue, but I really need to use it within LVM.
Quoted 7 lines
Any ideas?
_______________________________________________
linux-lvm mailing list
[email protected]
https://www.redhat.com/mailman/listinfo/linux-lvm
read the LVM HOW-TO at http://tldp.org/HOWTO/LVM-HOWTO/
=======================================================================================
La teta que la mano no cubre, no es teta sino ubre.
-- An�nim.
=======================================================================================
Responses in line.
Thanks, Clif
Quoted 3 lines · Eduardo
Clif try to make a partition type linux lvm.. (8e) and after try pvcreate over it
# fdisk -l /dev/emcpowera
Disk /dev/emcpowera: 10.7 GB, 10737418240 bytes
255 heads, 63 sectors/track, 1305 cylinders
Units = cylinders of 16065 * 512 = 8225280 bytes
Device Boot Start End Blocks Id System
/dev/emcpowera1 1 1305 10482381 8e Linux LVM# pvcreate /dev/emcpowera pvcreate -- invalid physical volume "/dev/emcpowera"
Quoted 3 lines
send a output of pvcreate -v
/dev/emcpowera
# pvcreate -v /dev/emcpowera pvcreate -- locking logical volume manager pvcreate -- checking physical volume name "/dev/emcpowera" pvcreate -- getting physical volume size pvcreate -- checking maximum physical volume size pvcreate -- checking partition type pvcreate -- invalid physical volume "/dev/emcpowera"
Quoted 4 lines
if you complile with debug use pvcreate -dv
/dev/emcpowera
# pvcreate -dv /dev/emcpowera <1> lvm_get_iop_version -- CALLED <22> lvm_check_special -- CALLED <22> lvm_check_special -- LEAVING <1> lvm_get_iop_version -- AFTER ioctl ret: 0 <1> lvm_get_iop_version -- LEAVING with ret: 10 pvcreate -- locking logical volume manager <1> lvm_lock -- CALLED <22> lvm_check_special -- CALLED <22> lvm_check_special -- LEAVING <1> lvm_lock -- LEAVING with ret: 0 pvcreate -- checking physical volume name "/dev/emcpowera" <1> pv_check_name -- CALLED with "/dev/emcpowera" <22> lvm_check_chars -- CALLED with name: "/dev/emcpowera" <22> lvm_check_chars -- LEAVING with ret: 0 <1> pv_check_name -- LEAVING with ret: 0 pvcreate -- getting physical volume size <1> _pv_get_dev_size -- CALLED with /dev/emcpowera and 0xbfffa650 <1> _pv_get_dev_size -- LEAVING with ret: 20971520 pvcreate -- checking maximum physical volume size <1> pv_create_kdev_t -- CALLED with "/dev/emcpowera" <22> pv_check_name -- CALLED with "/dev/emcpowera" <333> lvm_check_chars -- CALLED with name: "/dev/emcpowera" <333> lvm_check_chars -- LEAVING with ret: 0 <22> pv_check_name -- LEAVING with ret: 0 <1> pv_create_kdev_t -- LEAVING with ret: E800 <1> lvm_check_partitioned_dev -- CALLED <22> lvm_get_device_type called <22> lvm_get_device_type leaving with -1 <1> lvm_check_partitioned_dev -- LEAVING with ret: FALSE pvcreate -- checking partition type <1> pv_read -- CALLED with /dev/emcpowera <22> pv_check_name -- CALLED with "/dev/emcpowera" <333> lvm_check_chars -- CALLED with name: "/dev/emcpowera" <333> lvm_check_chars -- LEAVING with ret: 0 <22> pv_check_name -- LEAVING with ret: 0 <1> pv_read -- going to read /dev/emcpowera <22> lvm_check_dev -- CALLED <333> lvm_check_partitioned_dev -- CALLED <4444> lvm_get_device_type called <4444> lvm_get_device_type leaving with -1 <333> lvm_check_partitioned_dev -- LEAVING with ret: FALSE <22> lvm_check_dev -- LEAVING with ret: 0 <1> pv_read -- LEAVING with ret: -270 pvcreate -- invalid physical volume "/dev/emcpowera"
<1> lvm_unlock -- CALLED
<1> lvm_unlock -- LEAVING with ret: 0
Quoted 44 lines
send the error leve returns echo $?
regards!
On Mon, 11 Apr 2005 21:52:08 -0500, Clif Smith wrote
Quoted 12 lines
I'm running lvm-1.0.8-9 on RHES3 and am receiving the following when I try to utilize a volume from an EMC array:
# pvcreate /dev/emcpowera pvcreate -- invalid physical volume "/dev/emcpowera"The OS sees the volume fine:
# fdisk -l /dev/emcpowera Disk /dev/emcpowera: 10.7 GB, 10737418240 bytes 255 heads, 63 sectors/track, 1305 cylinders Units = cylinders of 16065 * 512 = 8225280 bytesI can create a partition and then a filesystem without issue, but I really need to use it within LVM.
Quoted 9 lines
Any ideas?
_______________________________________________
linux-lvm mailing list
[email protected]
https://www.redhat.com/mailman/listinfo/linux-lvm
read the LVM HOW-TO at http://tldp.org/HOWTO/LVM-HOWTO/=======================================================================================
La teta que la mano no cubre, no es teta sino ubre.
-- An�nim.
=======================================================================================_______________________________________________
linux-lvm mailing list
[email protected]
https://www.redhat.com/mailman/listinfo/linux-lvm
read the LVM HOW-TO at http://tldp.org/HOWTO/LVM-HOWTO/
try pvcreate /dev/emcpowera1 is for the partition not for the disk...
please summarize
regards!
On Tue, 12 Apr 2005 09:51:20 -0500, Clif Smith wrote
Quoted 7 lines
Responses in line.
Thanks, Clif
Quoted 1 line · Eduardo
Clif try to make a partition type linux lvm.. (8e) and after try pvcreate
over it
Quoted 125 lines
Quoted 2 lines
# fdisk -l /dev/emcpowera Disk /dev/emcpowera: 10.7 GB, 10737418240 bytes 255 heads, 63 sectors/track, 1305 cylinders Units = cylinders of 16065 * 512 = 8225280 bytes Device Boot Start End Blocks Id System /dev/emcpowera1 1 1305 10482381 8e Linux LVM# pvcreate /dev/emcpowera pvcreate -- invalid physical volume "/dev/emcpowera"Quoted 3 lines
send a output of pvcreate -v
/dev/emcpowera# pvcreate -v /dev/emcpowera pvcreate -- locking logical volume manager pvcreate -- checking physical volume name "/dev/emcpowera" pvcreate -- getting physical volume size pvcreate -- checking maximum physical volume size pvcreate -- checking partition type pvcreate -- invalid physical volume "/dev/emcpowera"Quoted 4 lines
if you complile with debug use pvcreate -dv
/dev/emcpowera# pvcreate -dv /dev/emcpowera <1> lvm_get_iop_version -- CALLED <22> lvm_check_special -- CALLED <22> lvm_check_special -- LEAVING <1> lvm_get_iop_version -- AFTER ioctl ret: 0 <1> lvm_get_iop_version -- LEAVING with ret: 10 pvcreate -- locking logical volume manager <1> lvm_lock -- CALLED <22> lvm_check_special -- CALLED <22> lvm_check_special -- LEAVING <1> lvm_lock -- LEAVING with ret: 0 pvcreate -- checking physical volume name "/dev/emcpowera" <1> pv_check_name -- CALLED with "/dev/emcpowera" <22> lvm_check_chars -- CALLED with name: "/dev/emcpowera" <22> lvm_check_chars -- LEAVING with ret: 0 <1> pv_check_name -- LEAVING with ret: 0 pvcreate -- getting physical volume size <1> _pv_get_dev_size -- CALLED with /dev/emcpowera and 0xbfffa650 <1> _pv_get_dev_size -- LEAVING with ret: 20971520 pvcreate -- checking maximum physical volume size <1> pv_create_kdev_t -- CALLED with "/dev/emcpowera" <22> pv_check_name -- CALLED with "/dev/emcpowera" <333> lvm_check_chars -- CALLED with name: "/dev/emcpowera" <333> lvm_check_chars -- LEAVING with ret: 0 <22> pv_check_name -- LEAVING with ret: 0 <1> pv_create_kdev_t -- LEAVING with ret: E800 <1> lvm_check_partitioned_dev -- CALLED <22> lvm_get_device_type called <22> lvm_get_device_type leaving with -1 <1> lvm_check_partitioned_dev -- LEAVING with ret: FALSE pvcreate -- checking partition type <1> pv_read -- CALLED with /dev/emcpowera <22> pv_check_name -- CALLED with "/dev/emcpowera" <333> lvm_check_chars -- CALLED with name: "/dev/emcpowera" <333> lvm_check_chars -- LEAVING with ret: 0 <22> pv_check_name -- LEAVING with ret: 0 <1> pv_read -- going to read /dev/emcpowera <22> lvm_check_dev -- CALLED <333> lvm_check_partitioned_dev -- CALLED <4444> lvm_get_device_type called <4444> lvm_get_device_type leaving with -1 <333> lvm_check_partitioned_dev -- LEAVING with ret: FALSE <22> lvm_check_dev -- LEAVING with ret: 0 <1> pv_read -- LEAVING with ret: -270 pvcreate -- invalid physical volume "/dev/emcpowera"<1>
lvm_unlock-- CALLED
<1>lvm_unlock-- LEAVING with ret: 0Quoted 34 lines
send the error leve returns echo $?
regards!
On Mon, 11 Apr 2005 21:52:08 -0500, Clif Smith wrote
Quoted 23 lines
I'm running lvm-1.0.8-9 on RHES3 and am receiving the following when I try to utilize a volume from an EMC array:
# pvcreate /dev/emcpowera pvcreate -- invalid physical volume "/dev/emcpowera"The OS sees the volume fine:
# fdisk -l /dev/emcpowera Disk /dev/emcpowera: 10.7 GB, 10737418240 bytes 255 heads, 63 sectors/track, 1305 cylinders Units = cylinders of 16065 * 512 = 8225280 bytesI can create a partition and then a filesystem without issue, but I really need to use it within LVM.
Any ideas?
_______________________________________________
linux-lvm mailing list
[email protected]
https://www.redhat.com/mailman/listinfo/linux-lvm
read the LVM HOW-TO at http://tldp.org/HOWTO/LVM-HOWTO/=======================================================================================
Quoted 2 lines
La teta que la mano no cubre, no es teta sino ubre.
-- An�nim.=======================================================================================
Quoted 8 lines
_______________________________________________
linux-lvm mailing list
[email protected]
https://www.redhat.com/mailman/listinfo/linux-lvm
read the LVM HOW-TO at http://tldp.org/HOWTO/LVM-HOWTO/
Quoted 5 lines
_______________________________________________
linux-lvm mailing list
[email protected]
https://www.redhat.com/mailman/listinfo/linux-lvm
read the LVM HOW-TO at http://tldp.org/HOWTO/LVM-HOWTO/
=======================================================================================
La teta que la mano no cubre, no es teta sino ubre.
-- An�nim.
=======================================================================================
I receive the same for all commands you requested, for example:
# pvcreate /dev/emcpowera1 pvcreate -- invalid physical volume "/dev/emcpowera1"
Quoted 187 lines · Eduardo
try pvcreate
/dev/emcpowera1is for the partition not for the disk...please summarize
regards!
On Tue, 12 Apr 2005 09:51:20 -0500, Clif Smith wrote
Quoted 11 lines
Responses in line.
Thanks, Clif
Quoted 3 lines · Eduardo
Clif try to make a partition type linux lvm.. (8e) and after try pvcreate
over it
Quoted 143 lines
Quoted 4 lines
# fdisk -l /dev/emcpowera Disk /dev/emcpowera: 10.7 GB, 10737418240 bytes 255 heads, 63 sectors/track, 1305 cylinders Units = cylinders of 16065 * 512 = 8225280 bytes Device Boot Start End Blocks Id System /dev/emcpowera1 1 1305 10482381 8e Linux LVM# pvcreate /dev/emcpowera pvcreate -- invalid physical volume "/dev/emcpowera"Quoted 5 lines
send a output of pvcreate -v
/dev/emcpowera# pvcreate -v /dev/emcpowera pvcreate -- locking logical volume manager pvcreate -- checking physical volume name "/dev/emcpowera" pvcreate -- getting physical volume size pvcreate -- checking maximum physical volume size pvcreate -- checking partition type pvcreate -- invalid physical volume "/dev/emcpowera"Quoted 6 lines
if you complile with debug use pvcreate -dv
/dev/emcpowera# pvcreate -dv /dev/emcpowera <1> lvm_get_iop_version -- CALLED <22> lvm_check_special -- CALLED <22> lvm_check_special -- LEAVING <1> lvm_get_iop_version -- AFTER ioctl ret: 0 <1> lvm_get_iop_version -- LEAVING with ret: 10 pvcreate -- locking logical volume manager <1> lvm_lock -- CALLED <22> lvm_check_special -- CALLED <22> lvm_check_special -- LEAVING <1> lvm_lock -- LEAVING with ret: 0 pvcreate -- checking physical volume name "/dev/emcpowera" <1> pv_check_name -- CALLED with "/dev/emcpowera" <22> lvm_check_chars -- CALLED with name: "/dev/emcpowera" <22> lvm_check_chars -- LEAVING with ret: 0 <1> pv_check_name -- LEAVING with ret: 0 pvcreate -- getting physical volume size <1> _pv_get_dev_size -- CALLED with /dev/emcpowera and 0xbfffa650 <1> _pv_get_dev_size -- LEAVING with ret: 20971520 pvcreate -- checking maximum physical volume size <1> pv_create_kdev_t -- CALLED with "/dev/emcpowera" <22> pv_check_name -- CALLED with "/dev/emcpowera" <333> lvm_check_chars -- CALLED with name: "/dev/emcpowera" <333> lvm_check_chars -- LEAVING with ret: 0 <22> pv_check_name -- LEAVING with ret: 0 <1> pv_create_kdev_t -- LEAVING with ret: E800 <1> lvm_check_partitioned_dev -- CALLED <22> lvm_get_device_type called <22> lvm_get_device_type leaving with -1 <1> lvm_check_partitioned_dev -- LEAVING with ret: FALSE pvcreate -- checking partition type <1> pv_read -- CALLED with /dev/emcpowera <22> pv_check_name -- CALLED with "/dev/emcpowera" <333> lvm_check_chars -- CALLED with name: "/dev/emcpowera" <333> lvm_check_chars -- LEAVING with ret: 0 <22> pv_check_name -- LEAVING with ret: 0 <1> pv_read -- going to read /dev/emcpowera <22> lvm_check_dev -- CALLED <333> lvm_check_partitioned_dev -- CALLED <4444> lvm_get_device_type called <4444> lvm_get_device_type leaving with -1 <333> lvm_check_partitioned_dev -- LEAVING with ret: FALSE <22> lvm_check_dev -- LEAVING with ret: 0 <1> pv_read -- LEAVING with ret: -270 pvcreate -- invalid physical volume "/dev/emcpowera"<1>
lvm_unlock-- CALLED
<1>lvm_unlock-- LEAVING with ret: 0Quoted 36 lines
send the error leve returns echo $?
regards!
On Mon, 11 Apr 2005 21:52:08 -0500, Clif Smith wrote
Quoted 23 lines
I'm running lvm-1.0.8-9 on RHES3 and am receiving the following when I try to utilize a volume from an EMC array:
# pvcreate /dev/emcpowera pvcreate -- invalid physical volume "/dev/emcpowera"The OS sees the volume fine:
# fdisk -l /dev/emcpowera Disk /dev/emcpowera: 10.7 GB, 10737418240 bytes 255 heads, 63 sectors/track, 1305 cylinders Units = cylinders of 16065 * 512 = 8225280 bytesI can create a partition and then a filesystem without issue, but I really need to use it within LVM.
Any ideas?
_______________________________________________
linux-lvm mailing list
[email protected]
https://www.redhat.com/mailman/listinfo/linux-lvm
read the LVM HOW-TO at http://tldp.org/HOWTO/LVM-HOWTO/=======================================================================================
Quoted 4 lines
La teta que la mano no cubre, no es teta sino ubre.
-- An�nim.=======================================================================================
Quoted 9 lines
_______________________________________________
linux-lvm mailing list
[email protected]
https://www.redhat.com/mailman/listinfo/linux-lvm
read the LVM HOW-TO at http://tldp.org/HOWTO/LVM-HOWTO/Quoted 7 lines
_______________________________________________
linux-lvm mailing list
[email protected]
https://www.redhat.com/mailman/listinfo/linux-lvm
read the LVM HOW-TO at http://tldp.org/HOWTO/LVM-HOWTO/=======================================================================================
La teta que la mano no cubre, no es teta sino ubre.
-- An�nim.
=======================================================================================_______________________________________________
linux-lvm mailing list
[email protected]
https://www.redhat.com/mailman/listinfo/linux-lvm
read the LVM HOW-TO at http://tldp.org/HOWTO/LVM-HOWTO/
try this:
https://bugzilla.redhat.com/bugzilla/show_bug.cgi?id=124647
are you the last comment?.
regards!
On Tue, 12 Apr 2005 10:27:01 -0500, Clif Smith wrote
Quoted 200 lines
I receive the same for all commands you requested, for example:
# pvcreate /dev/emcpowera1 pvcreate -- invalid physical volume "/dev/emcpowera1"Quoted 153 lines · Eduardo
try pvcreate
/dev/emcpowera1is for the partition not for the disk...please summarize
regards!
On Tue, 12 Apr 2005 09:51:20 -0500, Clif Smith wrote
Quoted 11 lines
Responses in line.
Thanks, Clif
Quoted 3 lines · Eduardo
Clif try to make a partition type linux lvm.. (8e) and after try pvcreate
over it
Quoted 83 lines
Quoted 4 lines
# fdisk -l /dev/emcpowera Disk /dev/emcpowera: 10.7 GB, 10737418240 bytes 255 heads, 63 sectors/track, 1305 cylinders Units = cylinders of 16065 * 512 = 8225280 bytes Device Boot Start End Blocks Id System /dev/emcpowera1 1 1305 10482381 8e Linux LVM# pvcreate /dev/emcpowera pvcreate -- invalid physical volume "/dev/emcpowera"Quoted 5 lines
send a output of pvcreate -v
/dev/emcpowera# pvcreate -v /dev/emcpowera pvcreate -- locking logical volume manager pvcreate -- checking physical volume name "/dev/emcpowera" pvcreate -- getting physical volume size pvcreate -- checking maximum physical volume size pvcreate -- checking partition type pvcreate -- invalid physical volume "/dev/emcpowera"Quoted 6 lines
if you complile with debug use pvcreate -dv
/dev/emcpowera# pvcreate -dv /dev/emcpowera <1> lvm_get_iop_version -- CALLED <22> lvm_check_special -- CALLED <22> lvm_check_special -- LEAVING <1> lvm_get_iop_version -- AFTER ioctl ret: 0 <1> lvm_get_iop_version -- LEAVING with ret: 10 pvcreate -- locking logical volume manager <1> lvm_lock -- CALLED <22> lvm_check_special -- CALLED <22> lvm_check_special -- LEAVING <1> lvm_lock -- LEAVING with ret: 0 pvcreate -- checking physical volume name "/dev/emcpowera" <1> pv_check_name -- CALLED with "/dev/emcpowera" <22> lvm_check_chars -- CALLED with name: "/dev/emcpowera" <22> lvm_check_chars -- LEAVING with ret: 0 <1> pv_check_name -- LEAVING with ret: 0 pvcreate -- getting physical volume size <1> _pv_get_dev_size -- CALLED with /dev/emcpowera and 0xbfffa650 <1> _pv_get_dev_size -- LEAVING with ret: 20971520 pvcreate -- checking maximum physical volume size <1> pv_create_kdev_t -- CALLED with "/dev/emcpowera" <22> pv_check_name -- CALLED with "/dev/emcpowera" <333> lvm_check_chars -- CALLED with name: "/dev/emcpowera" <333> lvm_check_chars -- LEAVING with ret: 0 <22> pv_check_name -- LEAVING with ret: 0 <1> pv_create_kdev_t -- LEAVING with ret: E800 <1> lvm_check_partitioned_dev -- CALLED <22> lvm_get_device_type called <22> lvm_get_device_type leaving with -1 <1> lvm_check_partitioned_dev -- LEAVING with ret: FALSE pvcreate -- checking partition type <1> pv_read -- CALLED with /dev/emcpowera <22> pv_check_name -- CALLED with "/dev/emcpowera" <333> lvm_check_chars -- CALLED with name: "/dev/emcpowera" <333> lvm_check_chars -- LEAVING with ret: 0 <22> pv_check_name -- LEAVING with ret: 0 <1> pv_read -- going to read /dev/emcpowera <22> lvm_check_dev -- CALLED <333> lvm_check_partitioned_dev -- CALLED <4444> lvm_get_device_type called <4444> lvm_get_device_type leaving with -1 <333> lvm_check_partitioned_dev -- LEAVING with ret: FALSE <22> lvm_check_dev -- LEAVING with ret: 0 <1> pv_read -- LEAVING with ret: -270 pvcreate -- invalid physical volume "/dev/emcpowera"Quoted 43 lines
<1>
lvm_unlock-- CALLED
<1>lvm_unlock-- LEAVING with ret: 0Quoted 38 lines
send the error leve returns echo $?
regards!
On Mon, 11 Apr 2005 21:52:08 -0500, Clif Smith wrote
Quoted 25 lines
I'm running lvm-1.0.8-9 on RHES3 and am receiving the following when I try to utilize a volume from an EMC array:
# pvcreate /dev/emcpowera pvcreate -- invalid physical volume "/dev/emcpowera"The OS sees the volume fine:
# fdisk -l /dev/emcpowera Disk /dev/emcpowera: 10.7 GB, 10737418240 bytes 255 heads, 63 sectors/track, 1305 cylinders Units = cylinders of 16065 * 512 = 8225280 bytesI can create a partition and then a filesystem without issue, but I really need to use it within LVM.
Any ideas?
_______________________________________________
linux-lvm mailing list
[email protected]
https://www.redhat.com/mailman/listinfo/linux-lvm
read the LVM HOW-TO at http://tldp.org/HOWTO/LVM-HOWTO/=======================================================================================
Quoted 2 lines
Quoted 26 lines
Quoted 4 lines
Quoted 4 lines
La teta que la mano no cubre, no es teta sino ubre.
-- An�nim.=======================================================================================
Quoted 18 lines
Quoted 11 lines
_______________________________________________
linux-lvm mailing list
[email protected]
https://www.redhat.com/mailman/listinfo/linux-lvm
read the LVM HOW-TO at http://tldp.org/HOWTO/LVM-HOWTO/_______________________________________________
linux-lvm mailing list
[email protected]
https://www.redhat.com/mailman/listinfo/linux-lvm
read the LVM HOW-TO at http://tldp.org/HOWTO/LVM-HOWTO/=======================================================================================
Quoted 2 lines
La teta que la mano no cubre, no es teta sino ubre.
-- An�nim.=======================================================================================
Quoted 8 lines
_______________________________________________
linux-lvm mailing list
[email protected]
https://www.redhat.com/mailman/listinfo/linux-lvm
read the LVM HOW-TO at http://tldp.org/HOWTO/LVM-HOWTO/
Quoted 5 lines
_______________________________________________
linux-lvm mailing list
[email protected]
https://www.redhat.com/mailman/listinfo/linux-lvm
read the LVM HOW-TO at http://tldp.org/HOWTO/LVM-HOWTO/
=======================================================================================
La teta que la mano no cubre, no es teta sino ubre.
-- An�nim.
=======================================================================================
I don't understand what to try as I'm already running lvm-1.0.8-9? Yes, that's my comment #37. Any idea what "U5" is in comment #38?
Quoted 272 lines · Eduardo
try this:
https://bugzilla.redhat.com/bugzilla/show_bug.cgi?id=124647
are you the last comment?.
regards!
On Tue, 12 Apr 2005 10:27:01 -0500, Clif Smith wrote
Quoted 240 lines
I receive the same for all commands you requested, for example:
# pvcreate /dev/emcpowera1 pvcreate -- invalid physical volume "/dev/emcpowera1"Quoted 178 lines · Eduardo
try pvcreate
/dev/emcpowera1is for the partition not for the disk...please summarize
regards!
On Tue, 12 Apr 2005 09:51:20 -0500, Clif Smith wrote
Quoted 15 lines
Responses in line.
Thanks, Clif
Quoted 5 lines · Eduardo
Clif try to make a partition type linux lvm.. (8e) and after try pvcreate
over it
Quoted 91 lines
Quoted 4 lines
# fdisk -l /dev/emcpowera Disk /dev/emcpowera: 10.7 GB, 10737418240 bytes 255 heads, 63 sectors/track, 1305 cylinders Units = cylinders of 16065 * 512 = 8225280 bytes Device Boot Start End Blocks Id System /dev/emcpowera1 1 1305 10482381 8e Linux LVM# pvcreate /dev/emcpowera pvcreate -- invalid physical volume "/dev/emcpowera"Quoted 7 lines
send a output of pvcreate -v
/dev/emcpowera# pvcreate -v /dev/emcpowera pvcreate -- locking logical volume manager pvcreate -- checking physical volume name "/dev/emcpowera" pvcreate -- getting physical volume size pvcreate -- checking maximum physical volume size pvcreate -- checking partition type pvcreate -- invalid physical volume "/dev/emcpowera"Quoted 8 lines
if you complile with debug use pvcreate -dv
/dev/emcpowera# pvcreate -dv /dev/emcpowera <1> lvm_get_iop_version -- CALLED <22> lvm_check_special -- CALLED <22> lvm_check_special -- LEAVING <1> lvm_get_iop_version -- AFTER ioctl ret: 0 <1> lvm_get_iop_version -- LEAVING with ret: 10 pvcreate -- locking logical volume manager <1> lvm_lock -- CALLED <22> lvm_check_special -- CALLED <22> lvm_check_special -- LEAVING <1> lvm_lock -- LEAVING with ret: 0 pvcreate -- checking physical volume name "/dev/emcpowera" <1> pv_check_name -- CALLED with "/dev/emcpowera" <22> lvm_check_chars -- CALLED with name: "/dev/emcpowera" <22> lvm_check_chars -- LEAVING with ret: 0 <1> pv_check_name -- LEAVING with ret: 0 pvcreate -- getting physical volume size <1> _pv_get_dev_size -- CALLED with /dev/emcpowera and 0xbfffa650 <1> _pv_get_dev_size -- LEAVING with ret: 20971520 pvcreate -- checking maximum physical volume size <1> pv_create_kdev_t -- CALLED with "/dev/emcpowera" <22> pv_check_name -- CALLED with "/dev/emcpowera" <333> lvm_check_chars -- CALLED with name: "/dev/emcpowera" <333> lvm_check_chars -- LEAVING with ret: 0 <22> pv_check_name -- LEAVING with ret: 0 <1> pv_create_kdev_t -- LEAVING with ret: E800 <1> lvm_check_partitioned_dev -- CALLED <22> lvm_get_device_type called <22> lvm_get_device_type leaving with -1 <1> lvm_check_partitioned_dev -- LEAVING with ret: FALSE pvcreate -- checking partition type <1> pv_read -- CALLED with /dev/emcpowera <22> pv_check_name -- CALLED with "/dev/emcpowera" <333> lvm_check_chars -- CALLED with name: "/dev/emcpowera" <333> lvm_check_chars -- LEAVING with ret: 0 <22> pv_check_name -- LEAVING with ret: 0 <1> pv_read -- going to read /dev/emcpowera <22> lvm_check_dev -- CALLED <333> lvm_check_partitioned_dev -- CALLED <4444> lvm_get_device_type called <4444> lvm_get_device_type leaving with -1 <333> lvm_check_partitioned_dev -- LEAVING with ret: FALSE <22> lvm_check_dev -- LEAVING with ret: 0 <1> pv_read -- LEAVING with ret: -270 pvcreate -- invalid physical volume "/dev/emcpowera"Quoted 49 lines
<1>
lvm_unlock-- CALLED
<1>lvm_unlock-- LEAVING with ret: 0Quoted 42 lines
send the error leve returns echo $?
regards!
On Mon, 11 Apr 2005 21:52:08 -0500, Clif Smith wrote
Quoted 25 lines
I'm running lvm-1.0.8-9 on RHES3 and am receiving the following when I try to utilize a volume from an EMC array:
# pvcreate /dev/emcpowera pvcreate -- invalid physical volume "/dev/emcpowera"The OS sees the volume fine:
# fdisk -l /dev/emcpowera Disk /dev/emcpowera: 10.7 GB, 10737418240 bytes 255 heads, 63 sectors/track, 1305 cylinders Units = cylinders of 16065 * 512 = 8225280 bytesI can create a partition and then a filesystem without issue, but I really need to use it within LVM.
Any ideas?
_______________________________________________
linux-lvm mailing list
[email protected]
https://www.redhat.com/mailman/listinfo/linux-lvm
read the LVM HOW-TO at http://tldp.org/HOWTO/LVM-HOWTO/=======================================================================================
Quoted 4 lines
Quoted 35 lines
Quoted 6 lines
Quoted 6 lines
La teta que la mano no cubre, no es teta sino ubre.
-- An�nim.=======================================================================================
Quoted 24 lines
Quoted 4 lines
Quoted 11 lines
_______________________________________________
linux-lvm mailing list
[email protected]
https://www.redhat.com/mailman/listinfo/linux-lvm
read the LVM HOW-TO at http://tldp.org/HOWTO/LVM-HOWTO/_______________________________________________
linux-lvm mailing list
[email protected]
https://www.redhat.com/mailman/listinfo/linux-lvm
read the LVM HOW-TO at http://tldp.org/HOWTO/LVM-HOWTO/=======================================================================================
Quoted 4 lines
La teta que la mano no cubre, no es teta sino ubre.
-- An�nim.=======================================================================================
Quoted 9 lines
_______________________________________________
linux-lvm mailing list
[email protected]
https://www.redhat.com/mailman/listinfo/linux-lvm
read the LVM HOW-TO at http://tldp.org/HOWTO/LVM-HOWTO/Quoted 7 lines
_______________________________________________
linux-lvm mailing list
[email protected]
https://www.redhat.com/mailman/listinfo/linux-lvm
read the LVM HOW-TO at http://tldp.org/HOWTO/LVM-HOWTO/=======================================================================================
La teta que la mano no cubre, no es teta sino ubre.
-- An�nim.
=======================================================================================_______________________________________________
linux-lvm mailing list
[email protected]
https://www.redhat.com/mailman/listinfo/linux-lvm
read the LVM HOW-TO at http://tldp.org/HOWTO/LVM-HOWTO/
Re: [linux-lvm] invalid physical volume SOLVED (sorta)
The problem "invalid physical volume" was caused by LVM not recognizing the volume being called by the path /dev/emcpowera and/or /dev/emcpowera1. Being that I'm not clustering and I don't need the functionality provided by EMC's app/wrapper PowerPath, I uninstalled it and used the standard device name /dev/sdX.
cjs
Quoted 270 lines · Clif Smith
I don't understand what to try as I'm already running lvm-1.0.8-9? Yes, that's my comment #37. Any idea what "U5" is in comment #38?
Quoted 253 lines · Eduardo
try this:
https://bugzilla.redhat.com/bugzilla/show_bug.cgi?id=124647
are you the last comment?.
regards!
On Tue, 12 Apr 2005 10:27:01 -0500, Clif Smith wrote
Quoted 226 lines
I receive the same for all commands you requested, for example:
# pvcreate /dev/emcpowera1 pvcreate -- invalid physical volume "/dev/emcpowera1"Quoted 167 lines · Eduardo
try pvcreate
/dev/emcpowera1is for the partition not for the disk...please summarize
regards!
On Tue, 12 Apr 2005 09:51:20 -0500, Clif Smith wrote
Quoted 13 lines
Responses in line.
Thanks, Clif
Quoted 3 lines · Eduardo
Clif try to make a partition type linux lvm.. (8e) and after try pvcreate
over it
Quoted 86 lines
Quoted 2 lines
# fdisk -l /dev/emcpowera Disk /dev/emcpowera: 10.7 GB, 10737418240 bytes 255 heads, 63 sectors/track, 1305 cylinders Units = cylinders of 16065 * 512 = 8225280 bytes Device Boot Start End Blocks Id System /dev/emcpowera1 1 1305 10482381 8e Linux LVM# pvcreate /dev/emcpowera pvcreate -- invalid physical volume "/dev/emcpowera"Quoted 5 lines
send a output of pvcreate -v
/dev/emcpowera# pvcreate -v /dev/emcpowera pvcreate -- locking logical volume manager pvcreate -- checking physical volume name "/dev/emcpowera" pvcreate -- getting physical volume size pvcreate -- checking maximum physical volume size pvcreate -- checking partition type pvcreate -- invalid physical volume "/dev/emcpowera"Quoted 6 lines
if you complile with debug use pvcreate -dv
/dev/emcpowera# pvcreate -dv /dev/emcpowera <1> lvm_get_iop_version -- CALLED <22> lvm_check_special -- CALLED <22> lvm_check_special -- LEAVING <1> lvm_get_iop_version -- AFTER ioctl ret: 0 <1> lvm_get_iop_version -- LEAVING with ret: 10 pvcreate -- locking logical volume manager <1> lvm_lock -- CALLED <22> lvm_check_special -- CALLED <22> lvm_check_special -- LEAVING <1> lvm_lock -- LEAVING with ret: 0 pvcreate -- checking physical volume name "/dev/emcpowera" <1> pv_check_name -- CALLED with "/dev/emcpowera" <22> lvm_check_chars -- CALLED with name: "/dev/emcpowera" <22> lvm_check_chars -- LEAVING with ret: 0 <1> pv_check_name -- LEAVING with ret: 0 pvcreate -- getting physical volume size <1> _pv_get_dev_size -- CALLED with /dev/emcpowera and 0xbfffa650 <1> _pv_get_dev_size -- LEAVING with ret: 20971520 pvcreate -- checking maximum physical volume size <1> pv_create_kdev_t -- CALLED with "/dev/emcpowera" <22> pv_check_name -- CALLED with "/dev/emcpowera" <333> lvm_check_chars -- CALLED with name: "/dev/emcpowera" <333> lvm_check_chars -- LEAVING with ret: 0 <22> pv_check_name -- LEAVING with ret: 0 <1> pv_create_kdev_t -- LEAVING with ret: E800 <1> lvm_check_partitioned_dev -- CALLED <22> lvm_get_device_type called <22> lvm_get_device_type leaving with -1 <1> lvm_check_partitioned_dev -- LEAVING with ret: FALSE pvcreate -- checking partition type <1> pv_read -- CALLED with /dev/emcpowera <22> pv_check_name -- CALLED with "/dev/emcpowera" <333> lvm_check_chars -- CALLED with name: "/dev/emcpowera" <333> lvm_check_chars -- LEAVING with ret: 0 <22> pv_check_name -- LEAVING with ret: 0 <1> pv_read -- going to read /dev/emcpowera <22> lvm_check_dev -- CALLED <333> lvm_check_partitioned_dev -- CALLED <4444> lvm_get_device_type called <4444> lvm_get_device_type leaving with -1 <333> lvm_check_partitioned_dev -- LEAVING with ret: FALSE <22> lvm_check_dev -- LEAVING with ret: 0 <1> pv_read -- LEAVING with ret: -270 pvcreate -- invalid physical volume "/dev/emcpowera"Quoted 45 lines
<1>
lvm_unlock-- CALLED
<1>lvm_unlock-- LEAVING with ret: 0Quoted 38 lines
send the error leve returns echo $?
regards!
On Mon, 11 Apr 2005 21:52:08 -0500, Clif Smith wrote
Quoted 23 lines
I'm running lvm-1.0.8-9 on RHES3 and am receiving the following when I try to utilize a volume from an EMC array:
# pvcreate /dev/emcpowera pvcreate -- invalid physical volume "/dev/emcpowera"The OS sees the volume fine:
# fdisk -l /dev/emcpowera Disk /dev/emcpowera: 10.7 GB, 10737418240 bytes 255 heads, 63 sectors/track, 1305 cylinders Units = cylinders of 16065 * 512 = 8225280 bytesI can create a partition and then a filesystem without issue, but I really need to use it within LVM.
Any ideas?
_______________________________________________
linux-lvm mailing list
[email protected]
https://www.redhat.com/mailman/listinfo/linux-lvm
read the LVM HOW-TO at http://tldp.org/HOWTO/LVM-HOWTO/=======================================================================================
Quoted 3 lines
Quoted 30 lines
Quoted 4 lines
Quoted 3 lines
La teta que la mano no cubre, no es teta sino ubre.
-- An�nim.=======================================================================================
Quoted 20 lines
Quoted 12 lines
_______________________________________________
linux-lvm mailing list
[email protected]
https://www.redhat.com/mailman/listinfo/linux-lvm
read the LVM HOW-TO at http://tldp.org/HOWTO/LVM-HOWTO/_______________________________________________
linux-lvm mailing list
[email protected]
https://www.redhat.com/mailman/listinfo/linux-lvm
read the LVM HOW-TO at http://tldp.org/HOWTO/LVM-HOWTO/=======================================================================================
Quoted 2 lines
La teta que la mano no cubre, no es teta sino ubre.
-- An�nim.=======================================================================================
Quoted 8 lines
_______________________________________________
linux-lvm mailing list
[email protected]
https://www.redhat.com/mailman/listinfo/linux-lvm
read the LVM HOW-TO at http://tldp.org/HOWTO/LVM-HOWTO/Quoted 6 lines
_______________________________________________
linux-lvm mailing list
[email protected]
https://www.redhat.com/mailman/listinfo/linux-lvm
read the LVM HOW-TO at http://tldp.org/HOWTO/LVM-HOWTO/=======================================================================================
La teta que la mano no cubre, no es teta sino ubre.
-- An�nim.
=======================================================================================Quoted 7 lines
_______________________________________________
linux-lvm mailing list
[email protected]
https://www.redhat.com/mailman/listinfo/linux-lvm
read the LVM HOW-TO at http://tldp.org/HOWTO/LVM-HOWTO/_______________________________________________
linux-lvm mailing list
[email protected]
https://www.redhat.com/mailman/listinfo/linux-lvm
read the LVM HOW-TO at http://tldp.org/HOWTO/LVM-HOWTO/
Quoted 5 lines · Clif Smith
I'm running lvm-1.0.8-9 on RHES3 and am receiving the following when I try to utilize a volume from an EMC array:
# pvcreate /dev/emcpowera pvcreate -- invalid physical volume "/dev/emcpowera"The OS sees the volume fine:
Quoted 9 lines
# fdisk -l /dev/emcpowera Disk /dev/emcpowera: 10.7 GB, 10737418240 bytes 255 heads, 63 sectors/track, 1305 cylinders Units = cylinders of 16065 * 512 = 8225280 bytesI can create a partition and then a filesystem without issue, but I really need to use it within LVM.
Any ideas?
either ditch powerpath or modify the lvm1 source code to understand it, second is not difficult, just look at the places where dac960 or ciss support was implemented.
L.
Signature · 6 lines
Luca Berra -- [email protected] Communication Media & Services S.r.l. /"\ \ / ASCII RIBBON CAMPAIGN X AGAINST HTML MAIL / \