Skip to contentSkip to conversation

Asyncronous Connection.

LARTC Rio Martin. 1 participant 2 messages Apr 13, 2005

lore
Share & tools
lore
#0 lore raw

Hi folks,
I need to develop asyncronous connection just like in DVB Satellite One Way Service, in my network. Incoming traffic and Outgoing traffic flowing through different link and interface.

Here i describe you more,

Existing system:
[ Router A ]

      eth0 : 192.168.0.1
          |
          |
          |
          |
      eth0 : 192.168.0.2

[ Router B ]

Router A and Router B on the same network 192.168.0.0/30 Router A set route to network 192.168.1.0/24 goes to 192.168.0.2

And my plan is to split the system like this,

Split system:
[ Router A ]
eth0 : 192.168.0.1

 |  eth1
 |     ||
 |     ||
 |     ||
 |     ||
 |  eth1

eth0 : 192.168.0.2
[ Router B ]

Incoming traffic to 192.168.1.0/24 from Router A to Router B goes through eth1 interface.
Outgoing traffic to 192.168.1.0/24 from Router B to Router A goes through eth0 interface.

Is this make sense with just using iproute only ? Please let me know how. Thanks.

Regards,
Rio Martin.
_______________________________________________
LARTC mailing list
[email protected]
http://mailman.ds9a.nl/cgi-bin/mailman/listinfo/lartc

#1 lore raw

Hi folks,
I need to develop asyncronous connection just like in DVB Satellite One Way Service, in my network. Incoming traffic and Outgoing traffic flowing through different link and interface.

Here i describe you more,

Existing system:
[ Router A ]
eth0 : 192.168.0.1

     #
     #
     #
     #

eth0 : 192.168.0.2
[ Router B ]

Router A and Router B on the same network 192.168.0.0/30 Router A set route to network 192.168.1.0/24 goes to 192.168.0.2

And my plan is to split the system like this,

Split system:
[ Router A ]
eth0 : 192.168.0.1
# eth1

#     ##
#     ##
#     ## 
#     ##

# eth1
eth0 : 192.168.0.2
[ Router B ]

Incoming traffic to 192.168.1.0/24 from Router A to Router B goes through
eth1 interface.
Outgoing traffic to 192.168.1.0/24 from Router B to Router A goes through
eth0 interface.

Is this make sense with just using iproute only ? Please let me know how. Thanks.

Regards,
Rio Martin.
_______________________________________________
LARTC mailing list
[email protected]
http://mailman.ds9a.nl/cgi-bin/mailman/listinfo/lartc