2.6 PCMCIA/USB question
I had hoped that one can figure things out from /proc and /sys. SHould'n there be a way to do this? And no, trial and error is not really an option. The devices in question are WCDMA/UMTS mobile data cards. They will differ only by the SIM card inserted by the user. The ICCID of the SIM is unknown during development and I would like to avoid to many configuration files.
Regards
Joerg
Quoted 13 lines · --- Alan Stern
Quoted 2 lines · Joerg Pommnitz
Hello all,
I have a question that I could not figure out from other sources. Ihave
Quoted 3 lines
the following hardware: an integrated CardBus USB host adapter with a connected USB serial device with three interfaces (normally ttyUSB0...ttyUSB2). Now I want to use 3 of these devices (remember:
they
Quoted 4 lines
are integrated, so I can't just plug the USB device onto the same host adapter). I know device A is in CardBus slot 1, device B is in CardBus slot 2 and so on.
Quoted 9 lines
Quoted 2 lines
Now the question: How do I figure out which ttyUSBx belongs to which device?
You can look in the system log. If you want, you can actually control which goes where by creating a udev configuration file.
Alan Stern
___________________________________________________________
Gesendet von Yahoo! Mail - Jetzt mit 250MB Speicher kostenlos - Hier anmelden: http://mail.yahoo.de