DRM not working with 2.6.11.5
Hello everyone,
I recently upgraded to 2.6.11.5 (back when it came out) from 2.4. One of the reasons I upgraded was to get DRM working with my computer again.
The AGP and DRM modules load fine, but when xdm starts, I have no direct rendering.
The machine is an ASUS A7V8x-x with VIA chipset KT400. The video card is a Matrox G400 DualHead. I've had the exact same video card working with different motherboards.
Here is the only DRM output relevant to AGP/DRM:
Linux agpgart interface v0.100 (c) Dave Jones
[drm] Initialized drm 1.0.0 20040925 [drm:drm_fill_in_dev] *ERROR* Cannot initialize the agpgart module.
DRM: Fill_in_dev failed.
Thanks very much for any tips!
Signature · 8 lines
Ross Vandegrift [email protected] "The good Christian should beware of mathematicians, and all those who make empty prophecies. The danger already exists that the mathematicians have made a covenant with the devil to darken the spirit and to confine man in the bonds of Hell." --St. Augustine, De Genesi ad Litteram, Book II, xviii, 37
Quoted 8 lines
The AGP and DRM modules load fine, but when xdm starts, I have no direct rendering.
The machine is an ASUS A7V8x-x with VIA chipset KT400. The video card is a Matrox G400 DualHead. I've had the exact same video card working with different motherboards.
Quoted 5 lines
Here is the only DRM output relevant to AGP/DRM:
Linux agpgart interface v0.100 (c) Dave Jones
[drm] Initialized drm 1.0.0 20040925 [drm:drm_fill_in_dev] *ERROR* Cannot initialize the agpgart module.
You didn't load the agp chipset module..
it would be nice if it happened automatically...
Dave.
Quoted 2 lines · Dave Airlie
You didn't load the agp chipset module..
it would be nice if it happened automatically...
Spot on - thanks man. Will update rc scripts from 2.4. Thanks!
Signature · 8 lines
Ross Vandegrift [email protected] "The good Christian should beware of mathematicians, and all those who make empty prophecies. The danger already exists that the mathematicians have made a covenant with the devil to darken the spirit and to confine man in the bonds of Hell." --St. Augustine, De Genesi ad Litteram, Book II, xviii, 37
Quoted 8 lines · Dave Airlie
Quoted 8 lines
The AGP and DRM modules load fine, but when xdm starts, I have no direct rendering.
The machine is an ASUS A7V8x-x with VIA chipset KT400. The video card is a Matrox G400 DualHead. I've had the exact same video card working with different motherboards.
Quoted 8 lines
Quoted 5 lines
Here is the only DRM output relevant to AGP/DRM:
Linux agpgart interface v0.100 (c) Dave Jones
[drm] Initialized drm 1.0.0 20040925 [drm:drm_fill_in_dev] *ERROR* Cannot initialize the agpgart module.You didn't load the agp chipset module..
it would be nice if it happened automatically...
Adam Jackson was looking into this a few days ago by making the generic agpgart.o send hotplug events to trigger a load of the submodules. If he comes up with something I'll throw it at -mm if it looks sane.
Dave
Quoted 5 lines
Adam Jackson was looking into this a few days ago by making the generic agpgart.o send hotplug events to trigger a load of the submodules. If he comes up with something I'll throw it at -mm if it looks sane.
is that needed? If the agp submodules advertise a list of pci id's isn't that enough to get them auto loaded ?
(that works for all other modules in the kernel... ;)