tc filter - based on iptables - MAC - MARK not working -
== tc filter - based on iptables - MAC fw marking not working =
DEV="eth1"
tc qdisc add dev $DEV root handle 1: htb default 20 tc class add dev $DEV parent 1: classid 1:1 htb rate 600kbps ceil 3276800kbit
tc class add dev $DEV parent 1:1 classid 1:15 htb rate 3kbps prio 4
tc class add dev $DEV parent 1:1 classid 1:20 htb rate 500kbps prio 3
tc qdisc add dev $DEV parent 1:15 handle 150: sfq perturb 10
tc qdisc add dev $DEV parent 1:20 handle 200: sfq perturb 10
tc filter add dev $DEV parent 1:0 protocol ip prio 3 handle 2 fw classid 1:15
tc filter add dev $DEV parent 1:0 protocol ip prio 2 handle 3 fw classid 1:20
iptables -t mangle -A FORWARD -m mac --mac-source 00:0D:87:60:61:37 -j MARK --set-mark 2
iptables -t mangle -A INPUT -m mac --mac-source
00:0D:87:60:61:37 -j MARK --set-mark 2
iptables -t mangle -A PREROUTING -m mac --mac-source
00:0D:87:60:61:37 -j MARK --set-mark 2 #iptables -t mangle -A FORWARD -s 192.168.0.33 -j MARK --set-mark 0x2
#iptables -t mangle -A FORWARD -d 192.168.0.33 -j MARK --set-mark 0x2
Tried several times:
tc qdisc del dev eth0 root
iptables -F -t mangle
and run the above script in every possible way but the damn thing does not take into account my MAC === I tried to mark on INPUT, FORWARD AND PREROUTING -- none of them seems to work
If i uncomment and try on -s, -d ip works great but I really need to match MAC addresses
I looked at my kernel MAC -- related config:
I have kernel 2.6.10 with:CONFIG_IP_NF_MATCH_MAC=yCONFIG_IP_NF_MATCH_MARK=y
and other settings ( I took almost all options
related)
.............CONFIG_IP_NF_ARPTABLES=yCONFIG_IP_NF_ARPFILTER=yCONFIG_IP_NF_ARP_MANGLE=yCONFIG_IP_ROUTE_FWMARK=y
etc..
What I'm missing here ?
Best regards
__________________________________
Do you Yahoo!?
Read only the mail you want - Yahoo! Mail SpamGuard.
http://promotions.yahoo.com/new_mail
_______________________________________________
LARTC mailing list
[email protected]
http://mailman.ds9a.nl/cgi-bin/mailman/listinfo/lartc
Re: [LARTC] tc filter - based on iptables - MAC - MARK not working
Quoted 5 lines · Daniel Dafoe
== tc filter - based on iptables - MAC fw marking not working =
DEV="eth1"
<snip>
Quoted 2 lines
Tried several times:
tc qdisc del dev eth0 root
eth0?
iptables src MAC works for me with 1.3.1 - can you see the rule and counters matching with iptables -L -vnt mangle?
Andy.
_______________________________________________
LARTC mailing list
[email protected]
http://mailman.ds9a.nl/cgi-bin/mailman/listinfo/lartc
--- Andy Furniss <[email protected]> wrote:
Thanks for your input:
modified DEV="eth0"
indeed was a typo -- but still no luck with shaping
iptables -L -vnt mangle
Chain PREROUTING (policy ACCEPT 5172K packets, 2786M bytes)
pkts bytes target prot opt in out source
destination
20470 3127K MARK all -- * *
0.0.0.0/0 0.0.0.0/0 MAC
00:0D:87:60:61:37 MARK set 0x2
Chain INPUT (policy ACCEPT 1772K packets, 594M bytes)
pkts bytes target prot opt in out source
destination
849 114K MARK all -- * *
0.0.0.0/0 0.0.0.0/0 MAC
00:0D:87:60:61:37 MARK set 0x2
Chain FORWARD (policy ACCEPT 3389K packets, 2191M
bytes)
pkts bytes target prot opt in out source
destination
19621 3013K MARK all -- * *
0.0.0.0/0 0.0.0.0/0 MAC
00:0D:87:60:61:37 MARK set 0x2
Chain OUTPUT (policy ACCEPT 1937K packets, 1567M
bytes)
pkts bytes target prot opt in out source
destination
Chain POSTROUTING (policy ACCEPT 5306K packets, 3756M bytes)
pkts bytes target prot opt in out source
destination
Best regards,
Daniel
__________________________________________________
Do You Yahoo!?
Tired of spam? Yahoo! Mail has the best spam protection around
http://mail.yahoo.com
_______________________________________________
LARTC mailing list
[email protected]
http://mailman.ds9a.nl/cgi-bin/mailman/listinfo/lartc
Re: [LARTC] tc filter - based on iptables - MAC - MARK not working
In reply to Daniel DafoeQuoted 25 lines · Daniel Dafoe
--- Andy Furniss <[email protected]> wrote:
Thanks for your input:
modified DEV="eth0"
indeed was a typo -- but still no luck with shapingiptables -L -vnt mangle
Chain PREROUTING (policy ACCEPT 5172K packets, 2786M bytes)
pkts bytes target prot opt in out source
destination
20470 3127K MARK all -- * *
0.0.0.0/0 0.0.0.0/0 MAC
00:0D:87:60:61:37 MARK set0x2Chain INPUT (policy ACCEPT 1772K packets, 594M bytes)
pkts bytes target prot opt in out source
destination
849 114K MARK all -- * *
0.0.0.0/0 0.0.0.0/0 MAC
00:0D:87:60:61:37 MARK set0x2
Quoted 7 lines
Chain FORWARD (policy ACCEPT 3389K packets, 2191M
bytes)
pkts bytes target prot opt in out source
destination
19621 3013K MARK all -- * *
0.0.0.0/0 0.0.0.0/0 MAC
00:0D:87:60:61:37 MARK set0x2
Well that bit looks OK can you see these packets going to the sfqs if you do
tc -s qdisc ls dev eth0 ?
I notice from the first post you have a really high ceil and mix kbps and kbit. bps = bytes per sec -
Quoted 2 lines
tc class add dev $DEV parent 1: classid 1:1 htb rate 600kbps ceil 3276800kbit
Andy.
_______________________________________________
LARTC mailing list
[email protected]
http://mailman.ds9a.nl/cgi-bin/mailman/listinfo/lartc
Thanks again for your response
tc -s qdisc ls dev eth0
qdisc htb 1: r2q 10 default 20 direct_packets_stat 0
Sent 12664555 bytes 9717 pkts (dropped 0, overlimits
374)
qdisc sfq 150: parent 1:15 limit 128p quantum 1514b perturb 10sec
Sent 0 bytes 0 pkts (dropped 0, overlimits 0)
qdisc sfq 200: parent 1:20 limit 128p quantum 1514b perturb 10sec
Sent 12664555 bytes 9717 pkts (dropped 0, overlimits
0)
Strange ----> overlimits but not dropped
__________________________________________________
Do You Yahoo!?
Tired of spam? Yahoo! Mail has the best spam protection around
http://mail.yahoo.com
_______________________________________________
LARTC mailing list
[email protected]
http://mailman.ds9a.nl/cgi-bin/mailman/listinfo/lartc
I really don't get it :
Recompiled my kernel dozen times now is 2.6.11-gentoo-r5 but still packets are marked by iptables but not shaped by tc. It only works when I mark packets on source/destination ip
As soon as I comment last two lines and uncomment the first one shaping is gone ....
iptables -t mangle -A FORWARD -m mac --mac-source 00-0d-87-60-61-37 -j MARK --set-mark 0x2
#iptables -t mangle -A PREROUTING -s 192.168.0.22 -j MARK --set-mark 0x2
#iptables -t mangle -A PREROUTING -d 192.168.0.22 -j MARK --set-mark 0x2
Best regards
__________________________________________________
Do You Yahoo!?
Tired of spam? Yahoo! Mail has the best spam protection around
http://mail.yahoo.com
_______________________________________________
LARTC mailing list
[email protected]
http://mailman.ds9a.nl/cgi-bin/mailman/listinfo/lartc
Re: [LARTC] tc filter - based on iptables - MAC - MARK not working
In reply to Daniel DafoeQuoted 14 lines · Daniel Dafoe
I really don't get it :
Recompiled my kernel dozen times now is 2.6.11-gentoo-r5 but still packets are marked by iptables but not shaped by tc. It only works when I mark packets on source/destination ip
As soon as I comment last two lines and uncomment the first one shaping is gone ....
iptables -t mangle -A FORWARD -m mac --mac-source 00-0d-87-60-61-37 -j MARK --set-mark
0x2
Quoted 6 lines
#iptables -t mangle -A PREROUTING -s 192.168.0.22 -j MARK --set-mark
0x2
#iptables -t mangle -A PREROUTING -d 192.168.0.22 -j MARK --set-mark0x2Best regards
See http://kernel.umbrella.ro/net/
and
http://selab.edu.ms/twiki/bin/view/Networking/MultihomedLinuxNetworking
Maybe something there will help.
--
gypsy
http://yesican.chsoft.biz/lartc
_______________________________________________
LARTC mailing list
[email protected]
http://mailman.ds9a.nl/cgi-bin/mailman/listinfo/lartc
Re: [LARTC] tc filter - based on iptables - MAC - MARK not working
In reply to Daniel DafoeReading along the Net it seems that MAC marking is not working with egress HTB (because ipables marks packages based on --mac-source ). So my only choice is using ingress or u32.
So this is how I did it:
I called bellow script add_shaping
DEV="eth0"
tc qdisc add dev $DEV root handle 1: htb default 20 tc class add dev $DEV parent 1: classid 1:1 htb rate 200kbps ceil 200kbps
tc class add dev $DEV parent 1:1 classid 1:15 htb rate 10kbps ceil 13kbps prio 3
tc class add dev $DEV parent 1:1 classid 1:20 htb rate 150kbps ceil 187kbps prio 2
tc qdisc add dev $DEV parent 1:15 handle 150: sfq perturb 10
tc qdisc add dev $DEV parent 1:20 handle 200: sfq perturb 10
U32="tc filter add dev $DEV parent 1:0 protocol ip u32"
for computers in cat /sistem/class15 | awk '{ print $1 }'
do
in="echo $computers | awk '{split($1,a,":"); print a[1]a[2] }'"
fin="echo $computers | awk '{split($1,a,":"); print a[3]a[4]a[5]a[6] }'"
$U32 match u16 0x0800 0xffff at -2 match u32 0x$fin 0xFFFFFFFF at -12 match u16 0x$in 0xFFFF at -14 classid 1:15
done
Explanation: On a file called /sistem/class15 I have MAC list
00:0D:87:60:61:37 JOHNNY
00:0E:A6:69:2B:74 HORY
00:50:8D:F9:E3:51 GIMMY
The script above (not so elegant I think but is my first attempt on awk) parse /sistem/class15 and add filter rules to match classid 1:15
I'll make scripts for files like /sistem/classxx to match class xx and classid 1:xx and so on -- after this I only modify files:
/sistem/class15
/sistem/class20
/sistem/classxx
and run:
tc qdisc del dev eth0 root (actually made a new script rm_shaping)
and of course run the awk script again (./add_shaping)
So finally all I have to do is rm_shaping, add_shaping and my modifications of /sistem/classxx files are
loaded ---
And shaping works like a charm ...:)
Best regards
__________________________________________________
Do You Yahoo!?
Tired of spam? Yahoo! Mail has the best spam protection around
http://mail.yahoo.com
_______________________________________________
LARTC mailing list
[email protected]
http://mailman.ds9a.nl/cgi-bin/mailman/listinfo/lartc
Re: [LARTC] tc filter - based on iptables - MAC - MARK not working
In reply to Daniel DafoeQuoted 9 lines · Daniel Dafoe
I really don't get it :
Recompiled my kernel dozen times now is 2.6.11-gentoo-r5 but still packets are marked by iptables but not shaped by tc. It only works when I mark packets on source/destination ip
As soon as I comment last two lines and uncomment the first one shaping is gone ....
So you may need to match on MAC dst rather than src or did you try with just -s 192.168.0.22 alone?
Andy.
Quoted 8 lines
iptables -t mangle -A FORWARD -m mac --mac-source 00-0d-87-60-61-37 -j MARK --set-mark
0x2#iptables -t mangle -A PREROUTING -s 192.168.0.22 -j MARK --set-mark
0x2
#iptables -t mangle -A PREROUTING -d 192.168.0.22 -j MARK --set-mark0x2
_______________________________________________
LARTC mailing list
[email protected]
http://mailman.ds9a.nl/cgi-bin/mailman/listinfo/lartc
Re: [LARTC] tc filter - based on iptables - MAC - MARK not working
In reply to Daniel DafoeQuoted 64 lines · Daniel Dafoe
Reading along the Net it seems that MAC marking is not working with egress HTB (because ipables marks packages based on --mac-source ). So my only choice is using ingress or u32.
So this is how I did it:
I called bellow script
add_shapingDEV="eth0"
tc qdisc add dev $DEV root handle 1: htb default 20 tc class add dev $DEV parent 1: classid 1:1 htb rate 200kbps ceil 200kbps
tc class add dev $DEV parent 1:1 classid 1:15 htb rate 10kbps ceil 13kbps prio 3
tc class add dev $DEV parent 1:1 classid 1:20 htb rate 150kbps ceil 187kbps prio 2
tc qdisc add dev $DEV parent 1:15 handle 150: sfq perturb 10
tc qdisc add dev $DEV parent 1:20 handle 200: sfq perturb 10U32="tc filter add dev $DEV parent 1:0 protocol ip u32"
for computers in
cat /sistem/class15 | awk '{ print $1 }'
do
in="echo $computers | awk '{split($1,a,":"); print a[1]a[2] }'"
fin="echo $computers | awk '{split($1,a,":"); print a[3]a[4]a[5]a[6] }'"
$U32 match u160x08000xffffat -2 match u32 0x$fin0xFFFFFFFFat -12 match u16 0x$in0xFFFFat -14 classid 1:15
doneExplanation: On a file called /sistem/class15 I have MAC list
00:0D:87:60:61:37 JOHNNY
00:0E:A6:69:2B:74 HORY
00:50:8D:F9:E3:51 GIMMYThe script above (not so elegant I think but is my first attempt on awk) parse /sistem/class15 and add filter rules to match classid 1:15
I'll make scripts for files like /sistem/classxx to match class xx and classid 1:xx and so on -- after this I only modify files:
/sistem/class15
/sistem/class20
/sistem/classxxand run:
tc qdisc del dev eth0 root (actually made a new scriptrm_shaping)
and of course run the awk script again (./add_shaping)
Quoted 5 lines
So finally all I have to do is
rm_shaping,add_shapingand my modifications of /sistem/classxx files are
loaded ---And shaping works like a charm ...:)
Glad you got it working - I didn't see this when I replied earlier mozilla didn't thread it with the rest.
Andy.
_______________________________________________
LARTC mailing list
[email protected]
http://mailman.ds9a.nl/cgi-bin/mailman/listinfo/lartc