Skip to contentSkip to conversation

kernel 2.4.27; Pentium M 1.8

DISCUSSION Vladimir Skokov 3 participants 3 messages May 5, 2005 – May 6, 2005

lore
Share & tools
lore
#0 lore raw

Hello.

I have applied cpufreq patch for kernel 2.4.27. However I have some issue with loading speedstep modules? Can you help? Thanks in advance.

dmesg:

May  5 20:52:33 pc7004c kernel: speedstep-centrino: found unsupported CPU with 

Enhanced SpeedStep

cat /proc/cpuinfo:
processor : 0
vendor_id : GenuineIntel
cpu family : 6
model : 13
model name : Intel(R) Pentium(R) M processor 1.80GHz
stepping : 6
cpu MHz : 1800.079
cache size : 64 KB
fdiv_bug : no
hlt_bug : no
f00f_bug : no
coma_bug : no
fpu : yes
fpu_exception : yes
cpuid level : 2
wp : yes
flags : fpu vme de pse tsc msr mce cx8 apic sep mtrr pge mca cmov
pat clflush dts acpi mmx fxsr sse sse2 ss tm pbe tm2 est
bogomips : 3591.37

#1 lore raw

Hi,

Quoted 4 lines · Vladimir Skokov

Hello.

I have applied cpufreq patch for kernel 2.4.27. However I have some issue with loading speedstep modules? Can you help? Thanks in advance.

This CPU is only supported by the speedstep-centrino module if the ACPI performance states library is used -- and that is only available for 2.6., AFAIK. Therefore, cpufreq isn't available for this CPU on 2.4.

Dominik

#2 lore raw
Quoted 10 lines · Dominik Brodowski

Hi,

Quoted 4 lines · Vladimir Skokov

Hello.

I have applied cpufreq patch for kernel 2.4.27. However I have some issue with loading speedstep modules? Can you help? Thanks in advance.

This CPU is only supported by the speedstep-centrino module if the ACPI performance states library is used -- and that is only available for 2.6., AFAIK. Therefore, cpufreq isn't available for this CPU on 2.4.

I'm working on this issue, but I can't promise when this will available.

Signature · 4 lines
Bruno Ducrot

--  Which is worse:  ignorance or apathy?
--  Don't know.  Don't care.