Building u-boot for Ocotea fails...
Hi,
while trying to build a u-boot image for Ocotea out of the latest CVS, I noticed the following problem:
ppc_4xx-ld: section .bss [fffeeb00 -> fffffec7] overlaps section .bootpg [fffff000 -> fffff21b]
This one should be solved, either by reducing the command set (i.e. removing CFG_CMD_BEDBUG) or increasing the size back to 512k, as it was before the latest changes took place...
TIA,
Gerhard
Signature · 3 lines
Gerhard Jaeger <[email protected]> SYSGO AG Embedded and Real-Time Software www.sysgo.com | www.elinos.com | www.pikeos.com | www.osek.de
Quoted 3 lines · In message <[email protected]> you wrote:
while trying to build a u-boot image for Ocotea out of the latest CVS, I noticed the following problem:
Just FYI: this should be solved now (LABEL_2005_08_12_0050 or later recommended)
Best regards,
Wolfgang Denk
Signature · 4 lines
Software Engineering: Embedded and Realtime Systems, Embedded Linux Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: wd at denx.de The IQ of the group is the lowest IQ of a member of the group divided by the number of people in the group.
Quoted 7 lines · Wolfgang Denk
Quoted 3 lines · In message <[email protected]> you wrote:
while trying to build a u-boot image for Ocotea out of the latest CVS, I noticed the following problem:
Just FYI: this should be solved now (
LABEL_2005_08_12_0050or later recommended)
Thanx, I'll check that...
Ciao,
Gerhard
Signature · 3 lines
Gerhard Jaeger <[email protected]> SYSGO AG Embedded and Real-Time Software www.sysgo.com | www.elinos.com | www.pikeos.com | www.osek.de