ide / debian
I want to combine hdb hdc and hdd to one logical volume. Each is 80G. All had a single partition. I have a 2.6.8 kernel. I run the latest Debian testing version of lvm2.
The first attempt only got me only 149G for the vg. So I followed the route suggested in the howto to delete the partition tables on every disk and use the devices. This give me a 220G vg. But there were some error messages about not opening /dev/hdb1 etc, which I ignored. I create an lv to fill the volume group and make an ext2 file system on it.
After the first reboot, the lv was not found. Inconsistent metaadata was reported, which I fixed with the suggested syntax, then tried to create the vg again, but got a much smaller size.
I want to start from scratch for the third time.
fafner:~# vgremove /dev/vg1 Volume group "vg1" not found or inconsistent. Consider vgreduce --removemissing if metadata is inconsistent. fafner:~# vgreduce --removemissing vg1 Volume group "vg1" not found fafner:~# vgscan Reading all physical volumes. This may take a while... fafner:~# vgcreate vg1 /dev/hdb /dev/hdc /dev/hdd /dev/vg1: already exists in filesystem
My general impression is that maybe with ide or Debian, this technology is not quite mature. If anyone wants to check out this problem, I will be happy to allow access to the machine.
Cheers,
Thomas Krichel mailto:[email protected]
http://openlib.org/home/krichel RePEc:per:1965-06-05:thomas_krichel
Thomas Krichel writes
Quoted 3 lines
I want to combine hdb hdc and hdd to one logical volume. Each is 80G. All had a single partition. I have a 2.6.8 kernel. I run the latest Debian testing version of lvm2.
I played on and found:
* OS sees all three disks
* I can pvcreate all disks
* pvscan does not find hdc
In command language, starting from scratch
fafner:~# pvscan No matching physical volumes found fafner:~# pvdisplay fafner:~# fdisk -l /dev/hdb
Disk /dev/hdb: 80.0 GB, 80026361856 bytes
255 heads, 63 sectors/track, 9729 cylinders Units = cylinders of 16065 * 512 = 8225280 bytes
Disk /dev/hdb doesn't contain a valid partition table
fafner:~# fdisk -l /dev/hdc
Disk /dev/hdc: 80.0 GB, 80026361856 bytes
255 heads, 63 sectors/track, 9729 cylinders Units = cylinders of 16065 * 512 = 8225280 bytes
Disk /dev/hdc doesn't contain a valid partition table
fafner:~# fdisk -l /dev/hdd
Disk /dev/hdd: 80.0 GB, 80026361856 bytes
16 heads, 63 sectors/track, 155061 cylinders Units = cylinders of 1008 * 512 = 516096 bytes
Disk /dev/hdd doesn't contain a valid partition table
fafner:~# pvcreate /dev/hdb ; pvcreate /dev/hdc ; pvcreate /dev/hdd ; Physical volume "/dev/hdb" successfully created Physical volume "/dev/hdc" successfully created Physical volume "/dev/hdd" successfully created fafner:~# pvdisplay --- NEW Physical volume --- PV Name /dev/hdc VG Name PV Size 74.53 GB Allocatable NO PE Size (KByte) 0 Total PE 0 Free PE 0 Allocated PE 0 PV UUID E725Ui-iBDc-r5uf-6vKi-L4Yw-9yzV-aJ2blr
--- NEW Physical volume ---
PV Name /dev/hdb
VG Name
PV Size 74.53 GB Allocatable NO PE Size (KByte) 0 Total PE 0 Free PE 0 Allocated PE 0 PV UUID TAfTgW-0In0-TZzF-mZoy-RsG5-v0DS-IHBvu1
--- NEW Physical volume ---
PV Name /dev/hdd
VG Name
PV Size 74.53 GB Allocatable NO PE Size (KByte) 0 Total PE 0 Free PE 0 Allocated PE 0 PV UUID mecykK-bBKE-0wCP-W7jZ-b0g2-O697-xW4zPS
fafner:~# pvscan PV /dev/hdb lvm2 [74.53 GB] PV /dev/hdd lvm2 [74.53 GB] Total: 2 [149.06 GB] / in use: 0 [0 ] / in no VG: 2 [149.06 GB] fafner:~# vgcreate vg1 /dev/hdb /dev/hdc /dev/hdd Volume group "vg1" successfully created fafner:~# vgscan Reading all physical volumes. This may take a while... Couldn't find device with uuid 'E725Ui-iBDc-r5uf-6vKi-L4Yw-9yzV-aJ2blr'. Couldn't find all physical volumes for volume group vg1. Couldn't find device with uuid 'E725Ui-iBDc-r5uf-6vKi-L4Yw-9yzV-aJ2blr'. Couldn't find all physical volumes for volume group vg1. Volume group "vg1" not found
Any advice would be much welcome!
Cheers,
Thomas Krichel mailto:[email protected]
http://openlib.org/home/krichel RePEc:per:1965-06-05:thomas_krichel
Quoted 11 lines · Thomas Krichel
Thomas Krichel writes
Quoted 3 lines
I want to combine hdb hdc and hdd to one logical volume. Each is 80G. All had a single partition. I have a 2.6.8 kernel. I run the latest Debian testing version of lvm2.
I played on and found:
* OS sees all three disks
* I can pvcreate all disks
* pvscan does not find hdc
Look in /etc/lvm/lvm.conf for a filter line - it probably has hdc or cdrom in it. You need to remove this.
Signature · 8 lines
AJ Lewis Voice: 612-638-0500 Red Hat Inc. E-Mail: [email protected] 720 Washington Ave. SE, Suite 200 Minneapolis, MN 55414 Current GPG fingerprint = D9F8 EDCE 4242 855F A03D 9B63 F50C 54A8 578C 8715 Grab the key at: http://people.redhat.com/alewis/gpg.html or one of the many keyservers out there...
AJ Lewis writes
Quoted 2 lines
Look in
/etc/lvm/lvm.conffor a filter line - it probably has hdc or cdrom in it. You need to remove this.
fafner:~# grep hdc /etc/lvm/lvm.conf
# Or maybe all loops and ide drives except hdc:
# filter =[ "a|loop|", "r|/dev/hdc|", "a|/dev/ide|", "r|.*|" ]
fafner:~# grep cdrom /etc/lvm/lvm.conf
# Exclude the cdrom drive
filter = [ "r|/dev/cdrom|" ]
fafner:~# ls -l /dev/cdrom
lrwxrwxrwx 1 root root 8 2005-05-08 21:27 /dev/cdrom -> /dev/hdcThis is likely to be the cause of the problem! Thank you so much!
Cheers,
Thomas Krichel mailto:[email protected]
http://openlib.org/home/krichel RePEc:per:1965-06-05:thomas_krichel