SCSI/libata/SATA problem
About the time the SCSI subsystem driver is loaded the hard drive activity light comes on and never goes out. The drive is a Western Digital, Vendor: ATA Model: WDC WD1200JD-00H Rev: 08.0.
The motherboard is an ASUS P5DA2-E Deluxe (intel 925x chipset).
Western Digital and ASUS both recommended I check the jumper settings, which I had done. ASUS also sent me a CD containing updates for the Windows drivers. I don't use Windows, and presume the disk to be irrelevant to solving the problem.
There appears to be no problems with data corruption; meaning if I copy large files from sda1 to hda1 drives the files show no difference.
If I boot only to hda1 and not automount the SATA drive (/home, /usr) things appear normal (no LED except when there is activity).
I saw some libata changes in the latest 31-pre2 so compiled and rebooted with no difference in behavior.
Links to dmesg, .config, and lspci output at bottom.
Same behavior in the latest 2.6.11 kernel (same drivers back ported?)
I am not subscribed to the list but do follow it via USENET.
uname -a
Linux Senior 2.4.30 #12 Wed May 11 21:15:29 EDT 2005 i686 unknown unknown GNU/Linux
cat /proc/cmdline
BOOT_IMAGE=2.4.30_hda1 ro root=301 hde=ide-cd hdg=ide-cd hdh=ide-cd ata2=none ata3=none ata4=none
dmesg | grep -i scsi
SCSI subsystem driver Revision: 1.00
scsi0 : ahci
scsi1 : ahci
scsi2 : ahci
scsi3 : ahci
Type: Direct-Access ANSI SCSI revision: 05
Attached scsi disk sda at scsi0, channel 0, id 0, lun 0 SCSI device sda: 234441648 512-byte hdwr sectors (120034 MB)
dmesg | grep libata
libata version 1.10 loaded.
dmesg | grep SATA
ahci(00:1f.2) AHCI 0001.0000 32 slots 4 ports 1.5 Gbps 0xf impl SATA mode
ata1: SATA max UDMA/133 cmd 0xF8800D00 ctl 0x0 bmdma 0x0 irq 19
ata2: SATA max UDMA/133 cmd 0xF8800D80 ctl 0x0 bmdma 0x0 irq 19
ata3: SATA max UDMA/133 cmd 0xF8800E00 ctl 0x0 bmdma 0x0 irq 19
ata4: SATA max UDMA/133 cmd 0xF8800E80 ctl 0x0 bmdma 0x0 irq 19
http://users.adelphia.net/~rinaldij/lspci.log
http://users.adelphia.net/~rinaldij/dmesg.log
http://users.adelphia.net/~rinaldij/kernel.cfg
Rinaldi
Signature · 1 line
The day after tomorrow is the third day of the rest of your life.
Quoted 4 lines · Rinaldi J. Montessi
About the time the SCSI subsystem driver is loaded the hard drive activity light comes on and never goes out. The drive is a Western Digital, Vendor: ATA Model: WDC WD1200JD-00H Rev: 08.0.
Same problem here with Fujitsu-Siemens Lifebook E8020 laptop running 2.6.11.9. Chipset is ICH6.
regards,
-michal