Skip to contentSkip to conversation

binutils-2.16 & kernel-2.6.11.10

PATCH In review Herbert Rosmanith 4 participants 6 messages May 21, 2005 – May 22, 2005

lore
Share & tools
lore
#0 lore raw

PATCH 1/1 binutils-2.16 & kernel-2.6.11.10

hi,

the "not being able to compile kernel with latest binutils" problem is also present in 2.6.11.10, at least in:

arch/i386/kernel/process.c
arch/i386/kernel/vm86.c
include/asm-i386/system.h

substituting movl with movw for segreg moves will make it work again, but I don't know if these are the only files which are probably affected, too.

(by the way - I once found an webpage which allowed viewing LKML in "realtime", but I've lost the adress - would anyone be so kind and tell me where I can find this?)

please find the patches below:

arch/i386/kernel/process.c 2005-05-21 23:20:44.000000000 +0200 renamed from arch/i386/kernel/process.c 2005-05-16 19:50:30.000000000 +0200 +5 -2
@@ -5,6 +5,9 @@
  *
  *  Pentium III FXSR, SSE support
  *     Gareth Hughes <[email protected]>, May 2000
+ *
+ * Sat May 21 22:11:22 MEST 2005 herp - Herbert Rosmanith
+ *      minor fixes for as from binutils-2.16
  */
 
 /*
@@ -596,8 +599,8 @@
         * Save away %fs and %gs. No need to save %es and %ds, as
         * those are always kernel segments while inside the kernel.
         */
-       asm volatile("movl %%fs,%0":"=m" (*(int *)&prev->fs));
-       asm volatile("movl %%gs,%0":"=m" (*(int *)&prev->gs));
+       asm volatile("movw %%fs,%0":"=m" (*(int *)&prev->fs));
+       asm volatile("movw %%gs,%0":"=m" (*(int *)&prev->gs));
 
        /*
         * Restore %fs and %gs if needed.
arch/i386/kernel/vm86.c 2005-05-21 23:10:13.000000000 +0200 renamed from arch/i386/kernel/vm86.c 2005-05-16 19:50:30.000000000 +0200 +5 -2
@@ -3,6 +3,9 @@
  *
  *  Copyright (C) 1994  Linus Torvalds
  *
+ *  21 may 2005 - make it compile with binutils-2.16.90
+ *                Herbert Rosmanith
+ *
  *  29 dec 2001 - Fixed oopses caused by unchecked access to the vm86
  *                stack - Manfred Spraul <[email protected]>
  *
@@ -309,8 +312,8 @@
  */
        info->regs32->eax = 0;
        tsk->thread.saved_esp0 = tsk->thread.esp0;
-       asm volatile("movl %%fs,%0":"=m" (tsk->thread.saved_fs));
-       asm volatile("movl %%gs,%0":"=m" (tsk->thread.saved_gs));
+       asm volatile("movw %%fs,%0":"=m" (tsk->thread.saved_fs));
+       asm volatile("movw %%gs,%0":"=m" (tsk->thread.saved_gs));
 
        tss = &per_cpu(init_tss, get_cpu());
        tsk->thread.esp0 = (unsigned long) &info->VM86_TSS_ESP0;
include/asm/system.h 2005-05-21 22:48:48.000000000 +0200 renamed from include/asm-i386/system.h 2005-05-16 19:51:12.000000000 +0200 +2 -2
@@ -81,7 +81,7 @@
 #define loadsegment(seg,value)                 \
        asm volatile("\n"                       \
                "1:\t"                          \
-               "movl %0,%%" #seg "\n"          \
+               "movw %0,%%" #seg "\n"          \
                "2:\n"                          \
                ".section .fixup,\"ax\"\n"      \
                "3:\t"                          \
@@ -99,7 +99,7 @@
  * Save a segment register away
  */
 #define savesegment(seg, value) \
-       asm volatile("movl %%" #seg ",%0":"=m" (*(int *)&(value)))
+       asm volatile("movw %%" #seg ",%0":"=m" (*(int *)&(value)))
 
 /*
  * Clear and set 'TS' bit respectively
#1 lore raw
Quoted 3 lines

(by the way - I once found an webpage which allowed viewing LKML in "realtime", but I've lost the adress - would anyone be so kind and tell me where I can find this?)

too late, got it: http://marc.theaimsgroup.com/?l=linux-kernel

thanks anyway for trying ;-)

best regards,
h.rosmanith

#2 lore raw
In reply to Herbert Rosmanith
Quoted 11 lines · Herbert Rosmanith

hi,

the "not being able to compile kernel with latest binutils" problem is also present in 2.6.11.10, at least in:

arch/i386/kernel/process.c
arch/i386/kernel/vm86.c
include/asm-i386/system.h

substituting movl with movw for segreg moves will make it work again, but I don't know if these are the only files which are probably affected, too.

http://www.kernel.org/pub/linux/devel/binutils/linux-2.6-seg-5.patch
http://www.kernel.org/pub/linux/devel/binutils/linux-2.4-seg-4.patch

should probably fix that.

Signature · 1 line
Jan
#4 lore raw
Quoted 11 lines · Herbert Rosmanith
Quoted 4 lines

http://www.kernel.org/pub/linux/devel/binutils/linux-2.6-seg-5.patch
http://www.kernel.org/pub/linux/devel/binutils/linux-2.4-seg-4.patch

should probably fix that.

interesting, that's the same patch (s/movl/movw/), but it is date from *march* 2005.

why is this not in the kernel source yet? It is definitely not okay to "movl" a segreg.

I'd also like to know the status of these patches; I've avoided the last couple binutils upgrades because of HJL's attached kernel patches and implied Linux build problems.
#

Andrew Walrond

#5 lore raw
Quoted 9 lines · you
Quoted 8 lines · Herbert Rosmanith
Quoted 4 lines

http://www.kernel.org/pub/linux/devel/binutils/linux-2.6-seg-5.patch
http://www.kernel.org/pub/linux/devel/binutils/linux-2.4-seg-4.patch

should probably fix that.

interesting, that's the same patch (s/movl/movw/), but it is date from *march* 2005.

Quoted 6 lines
Quoted 2 lines

why is this not in the kernel source yet? It is definitely not okay to "movl" a segreg.

I'd also like to know the status of these patches; I've avoided the last couple binutils upgrades because of HJL's attached kernel patches and implied Linux build problems.

For what it's worth, I recently built an adapted LFS SVN for x86-64, using HJL's binutils 2.16.90.0.2. A few weeks later, and still no problems. Literally the only package I had difficulty building was Linux itself, and the attached patches seem to work fine.

Let's hope they get into mainline shortly.

Signature · 8 lines
Cheers,
Alistair.

personal:   alistair()devzero!co!uk
university: s0348365()sms!ed!ac!uk
student:    CS/CSim Undergraduate
contact:    1F2 55 South Clerk Street,
            Edinburgh. EH8 9PP.