useing mangle to mark packets
Hello,
I use Linux with iptables as Router.
I want to mark several Packets which are coming from my Clients in my Network and where the destination ist the internet.
so I set following rule as example:
iptables -t mangle -o $DEV -A POSTROUTING -p ICMP -j MARK --set-mark 1
Is there a way to check if the packets get marks?
I tryed following:
iptables -A FORWARD -p ICMP -m mark --mark 1 -j LOG --log-prefix "mark " --log-level 6
But it doesnt work.
I want to set up traffice shaping using tc. So I need to mark packets so I can put them in order.
Thanks Sven
Quoted 10 lines · Sven Neukirchner
iptables -t mangle -o $DEV -A POSTROUTING -p ICMP -j MARK --set-mark 1
Is there a way to check if the packets get marks?
I tryed following:
iptables -A FORWARD -p ICMP -m mark --mark 1 -j LOG --log-prefix
"mark " --log-level 6But it doesnt work.
because mangle:POSTROUTING is traversed after filter:FORWARD.
Quoted 2 lines
I want to set up traffice shaping using tc. So I need to mark packets so I can put them in order.
mark your packet in either mangle:PREROUTING or mangle:FORWARD.
-j
--
"Susan Sarandon: I'm Susan Sarandon. Most of you know me as Tim
Robbins' mother, but actually I'm his wife!"
--Family Guy
Http connections left in FIN_WAIT1...
I am in the process of testing connectivity through my firewall. I have a server on my inside network that is being natted at the firewall from a public address to our internal, private address space (rfc1918). Using a box from the outside (www), I am able to connect to the server (ala links2). The data transfer starts and I get the message "Received 0 B of 1.4 kB, avg 0 B/s ...", but it times out after a couple of minutes. On the server side, I see the connection being established, but stops at FIN_WAIT1. Internally, the page displays just fine on a box very similar to the external box.
Iptables, at the moment, only has rules to allow specific ports (80,443) from the outside with a state of NEW, ESTABLISHED, or RELATED. Going back the other way, pretty much everything is allowed with an ESTABLISHED, or RELATED state. I don't have any rules doing tcp resets, only accept or log/reject.
Brian