Skip to contentSkip to conversation

I2C EEPROM write access

DISCUSSION Karel Kulhavy 3 participants 3 messages May 25, 2005 – May 28, 2005

lore
Share & tools
lore
#0 lore raw

Hello

Is it possible to use some Linux I2C driver to program an I2C EEPROM, for example 24C16?

I have noticed only read-only access to "DIMM eeproms". Are they 24C16-alike?

Is there some reason why write driver is not present like users could inadvertently overwrite their DIMM eeproms? Do these eeproms have a protection against write?

I am mainly interested in an application where 24C16 is in-circuit connected to a PC and contents read and wrote (typically poking at firmware configuration of various devices).

CL<

#1 lore raw
Quoted 7 lines · Karel Kulhavy

Hello

Is it possible to use some Linux I2C driver to program an I2C EEPROM, for example 24C16?

I have noticed only read-only access to "DIMM eeproms". Are they 24C16-alike?

SPD EEPROMs on DIMMs are 24C02.

Quoted 3 lines

Is there some reason why write driver is not present like users could inadvertently overwrite their DIMM eeproms? Do these eeproms have a protection against write?

The SPD EEPROMs should not be write protected - that's what specification says - so probably are not.

Quoted 5 lines

I am mainly interested in an application where 24C16 is in-circuit connected to a PC and contents read and wrote (typically poking at firmware configuration of various devices).

CL<

Signature · 1 line
Ondrej Zary
#2 lore raw
In reply to Karel Kulhavy

Hi Karel,

Sorry for the delay.

Quoted 2 lines

Is it possible to use some Linux I2C driver to program an I2C EEPROM, for example 24C16?

I don't think there is a driver for that. A driver isn't the only solution to do that though.

Quoted 2 lines

I have noticed only read-only access to "DIMM eeproms". Are they 24C16-alike?

The eeprom driver supports the 24C01, 24C02, 24C04, 24C08 and 24C16. In other words, all models which can be read using SMBus read byte data commands.

Quoted 2 lines

Is there some reason why write driver is not present like users could inadvertently overwrite their DIMM eeproms?

Exactly.

Quoted 1 line

Do these eeproms have a protection against write?

Some have, but that's unrelated.

Quoted 3 lines

I am mainly interested in an application where 24C16 is in-circuit connected to a PC and contents read and wrote (typically poking at firmware configuration of various devices).

You may want to look at the prog/eepromer directory of the lm_sensors project. We have a set of user-space tools to write to EEPROMs of various sizes. They rely on the i2c-dev driver as the user-space/kernel interface.

Signature · 1 line
Jean Delvare