s390: claw driver wiring

PATCH In review Frank Pavlic 1 participant 1 message May 27, 2005

Subsystems (3)

Network drivers s390 s390 network drivers

lore

Share & tools

lore

Frank Pavlic

author

2005-05-27 09:00 UTC #0 lore raw

PATCH 1/10 s390: claw driver wiring

[patch 1/10] s390: claw driver wiring.

From: Andy Richter <[email protected]>

claw network driver changes:
- Add an entry to the drivers/s390/net Makefile to build the claw driver.
- Add claw channel type to cu3088.

Signed-off-by Frank Pavlic <[email protected]>

diffstat:

 drivers/s390/net/Makefile |    1 +
 drivers/s390/net/cu3088.c |    4 +++-
 drivers/s390/net/cu3088.h |    3 +++
 3 files changed, 7 insertions(+), 1 deletion(-)

drivers/s390/net/cu3088.c +3 -1

diff -urpN linux-2.6/drivers/s390/net/cu3088.c linux-2.6-patched/drivers/s390/net/cu3088.c
@@ -1,5 +1,5 @@
 /*
- * $Id: cu3088.c,v 1.34 2004/06/15 13:16:27 pavlic Exp $
+ * $Id: cu3088.c,v 1.35 2005/03/30 19:28:52 richtera Exp $
  *
  * CTC / LCS ccw_device driver
  *

@@ -39,6 +39,7 @@ const char *cu3088_type[] = {
 	"FICON channel",
 	"P390 LCS card",
 	"OSA LCS card",
+	"CLAW channel device",
 	"unknown channel type",
 	"unsupported channel type",
 };

@@ -51,6 +52,7 @@ static struct ccw_device_id cu3088_ids[]
 	{ CCW_DEVICE(0x3088, 0x1e), .driver_info = channel_type_ficon },
 	{ CCW_DEVICE(0x3088, 0x01), .driver_info = channel_type_p390 },
 	{ CCW_DEVICE(0x3088, 0x60), .driver_info = channel_type_osa2 },
+	{ CCW_DEVICE(0x3088, 0x61), .driver_info = channel_type_claw },
 	{ /* end of list */ }
 };

drivers/s390/net/cu3088.h +3 -0

diff -urpN linux-2.6/drivers/s390/net/cu3088.h linux-2.6-patched/drivers/s390/net/cu3088.h
@@ -23,6 +23,9 @@ enum channel_types {
 	/* Device is a OSA2 card */
 	channel_type_osa2,
 
+	/* Device is a CLAW channel device */
+	channel_type_claw,
+
 	/* Device is a channel, but we don't know
 	 * anything about it */
 	channel_type_unknown,

drivers/s390/net/Makefile +1 -0

diff -urpN linux-2.6/drivers/s390/net/Makefile linux-2.6-patched/drivers/s390/net/Makefile
@@ -9,6 +9,7 @@ obj-$(CONFIG_NETIUCV) += netiucv.o fsm.o
 obj-$(CONFIG_SMSGIUCV) += smsgiucv.o
 obj-$(CONFIG_CTC) += ctc.o fsm.o cu3088.o
 obj-$(CONFIG_LCS) += lcs.o cu3088.o
+obj-$(CONFIG_CLAW) += claw.o cu3088.o
 qeth-y := qeth_main.o qeth_mpc.o qeth_sys.o qeth_eddp.o qeth_tso.o
 qeth-$(CONFIG_PROC_FS) += qeth_proc.o
 obj-$(CONFIG_QETH) += qeth.o