Skip to contentSkip to conversation

PCI: How to find if BIOS has already enabled the device

DISCUSSION Parag Warudkar 1 participant 1 message May 28, 2005

lore
Share & tools
lore
#0 lore raw

I am trying to trace the root cause of an annoying problem with a USB Storage device -

My laptop's BIOS supports booting from USB devices. I have attached an external USB HDD to a USB 2.0 port. If I boot Linux with the HDD attached and powered on, load of OHCI-HCD module hangs the machine for around 2 minutes - after that it recovers and all is fine. I have tried different distros without luck, but while installing debian, I figured out that the hang happens after ohci-hcd calls pci_enable_device() for the USB controller.

This does not happen when the boot is complete. I.e. if I attach the HDD after boot is complete (BIOS did not get a chance to enable it beforehand) load of ohci-hcd (during and after boot) does not hang the machine.

I think since the machine supports booting from USB HDD, the BIOS must be enabling the USB controller and attached device early during boot, and when ohci-hcd tries to re-enable it, it doesn't like it and leads to a hang.

My question - Is it possible to detect if the USB controller is already enabled and skip enabling it second time?

Thanks

Parag