Skip to contentSkip to conversation

2.6.12-rc5-mm2

PATCH In review Andrew Morton 13 participants 20 messages Jun 1, 2005 – Jun 5, 2005

Subsystems (4)
Networking Network drivers Networking drivers (wireless) TCP
lore
Share & tools
lore

Andrew Morton

author
#0 lore raw

ftp://ftp.kernel.org/pub/linux/kernel/people/akpm/patches/2.6/2.6.12-rc5/2.6.12-rc5-mm2/

- Dropped bk-acpi.patch. Too old, too much breakage.

- A few more subsystem trees have moved to using git

- There are a large number of patches here which fix patches which people have already sent. A very large number. Are we getting a bit careless?

Changes since 2.6.12-rc5-mm1:

-v4l-bttv-i2c-oops-fix.patch
-ipmi-build-fix.patch
-x86_64-config_bug=n-fixes.patch -ib-allow-null-sa_query-callbacks.patch -ib-fix-potential-ib_umad-leak.patch -ib-fix-endianness-of-path-record-mtu-field.patch -make-sure-therm_adt746x-only-handles-known-hardware.patch -therm_adt746x-show-correct-sensor-locations.patch -drivers-firmware-pcdpc-build-fix.patch -natsemi-multicast-initialisation-fix.patch -r8169-new-pci-id.patch -r8169-de-obfuscate-supported-pci-id.patch -r8169-identify-the-napi-version.patch -r8169-add-module-parameter-description-for-copybreak.patch -r8169-add-module-parameter-description-for-the-media-option.patch -r8169-ethtool-message-level-control-support.patch -r8169-ethtool-support-for-dumping-the-chip-statistics.patch -r8169-cleanup-function-args.patch -git-scsi-misc-build-fix.patch -git-scsi-misc-sbp2-warning-fix.patch
-mystery-ide-fix.patch
-dm9000-network-driver.patch -fix-promisc-bridging-in-tlan-driver.patch -iseries_veth-dont-send-packets-to-lpars-which-arent-up.patch -iseries_veth-set-dev-trans_start-so-watchdog-timer-works-right.patch -iseries_veth-dont-leak-skbs-in-rx-path.patch -iseries_veth-cleanup-skbs-to-prevent-unregister_netdevice-hanging.patch -ppc32-small-cpufreq-update.patch -ppc32-fix-uimage-make-target-to-report-success-correctly.patch -ppc32-fix-some-minor-issues-related-to-fsl-book-e-kgdb.patch -ppc32-fix-alsa-powermac-driver-on-old-machines.patch -ppc32-add-via-ide-support-to-mpc8555-cds-platform.patch -ppc32-support-for-82xx-pqii-on-chip-pci-bridge.patch -uml-add-modversions-support.patch -uml-add-mod_license-to-random-driver.patch -uml-split-config_frame_pointer-from-debug_info.patch -uml-stack-dump-fix.patch -timeout-at-boottime-with-nec3500a-and-others-when-inserted-a-cd-in-it.patch

Merged

+fix-ide-scsi-eh-locking.patch

ide-scsi locking fix

+ext3-fix-log_do_checkpoint-assertion-failure.patch +ext3-fix-list-scanning-in-__cleanup_transaction.patch

ext3 fixes

+smp_processor_id-cleanup.patch
+smp_processor_id-cleanup-fix.patch

Clean up the _smp_processor_id() implementation

+i386-cpu-hotplug-updated-for-mm-smp_processor_id-cleanup-fix.patch +sibling-map-initializing-rework-smp_processor_id-cleanup-fix.patch +cpu-state-clean-after-hot-remove-smp_processor_id-cleanup-fix.patch +detect-soft-lockups-smp_processor_id-cleanup-fix.patch +timers-fixes-improvements-smp_processor_id-cleanup-fix.patch

Fix various patches in -mm for the above.

-bk-acpi.patch

Dropped

-ipmi-and-acpi=offht-acpi-get-firmware-failurepatch.patch -ipmi-and-acpi=offht-ipmi_si_intf-acpi-disabled.patch

Dropped due to bk-acpi droppage

-alsa-3073.patch
-alsa-3074.patch
-alsa-3075.patch
-alsa-3076.patch
-alsa-3077.patch
-alsa-3078.patch
-alsa-3079.patch
-alsa-3080.patch
-alsa-3081.patch
-alsa-3082.patch
-alsa-3083.patch
-alsa-3084.patch
-alsa-3085.patch
-alsa-3086.patch
-alsa-3087.patch
-alsa-3088.patch
-alsa-3091.patch
-alsa-3092.patch
-alsa-3093.patch
-alsa-3094.patch
-alsa-3095.patch
-alsa-3096.patch
-alsa-3097.patch
-alsa-3098.patch
-alsa-3099.patch
-alsa-3100.patch
-alsa-3101.patch
-alsa-3102.patch
-alsa-3103.patch
-alsa-3104.patch
-alsa-3105.patch
-alsa-3106.patch
-alsa-3107.patch
-alsa-3108.patch
-alsa-3111.patch
-alsa-3112.patch
-alsa-3113.patch
-alsa-3114.patch
-alsa-3115.patch
-alsa-3116.patch
-alsa-3117.patch
-alsa-3118.patch
-alsa-3119.patch
-alsa-3120.patch
-alsa-3121.patch
-alsa-3122.patch
-alsa-3123.patch
-alsa-3126.patch
-alsa-3128.patch
-alsa-3129.patch
-alsa-3130.patch
-alsa-3131.patch
-alsa-3132.patch
-alsa-3133.patch
-alsa-3134.patch
-alsa-3135.patch
-alsa-3136.patch
-alsa-3137.patch
-alsa-3138.patch
-alsa-3139.patch
-alsa-3140.patch
-alsa-3141.patch
-alsa-3142.patch
-alsa-3143.patch
-alsa-3144.patch
-alsa-3145.patch
-alsa-3146.patch
-alsa-3147.patch
-alsa-3148.patch
-alsa-3149.patch
-alsa-3150.patch
-alsa-3151.patch
-alsa-3152.patch
-alsa-3153.patch
-alsa-3154.patch
-alsa-3155.patch
-alsa-3156.patch
-alsa-3157.patch
-alsa-3158.patch
-alsa-3159.patch
-alsa-3160.patch
-alsa-3161.patch
-alsa-3162.patch
-alsa-3163.patch
-alsa-3164.patch
-alsa-3165.patch
-alsa-3166.patch
-alsa-3167.patch
+git-alsa.patch

ALSA development now has a git tree

-cpufreq-CPUFREQ-01-powernow-k7-No-FSB-KHz.patch -cpufreq-CPUFREQ-02-core-reduce-warning-msgs.patch -cpufreq-CPUFREQ-03-speedstep-centrino-P4M-HT-support.patch -cpufreq-CPUFREQ-04-ondemand-cleanups.patch -cpufreq-CPUFREQ-05-speedstep-smi-p4m.patch -cpufreq-CPUFREQ-06-default-governor-warning.patch -cpufreq-CPUFREQ-07-AMD-Elan-driver.patch -cpufreq-CPUFREQ-11-recalibrate-cpu_khz.patch -cpufreq-CPUFREQ-12-recalibrate-cpu_khz-2.patch -cpufreq-CPUFREQ-13-static-cpufreq_gov_dbs.patch -cpufreq-CPUFREQ-14-powernow-k8-dualcore.patch -cpufreq-CPUFREQ-15-transition-latency-thinko.patch -cpufreq-CPUFREQ-16-conservative-governer.patch -cpufreq-CPUFREQ-17-ondemand-ignore-nice.patch -cpufreq-CPUFREQ-18-ondemand-check-rate-and-break-out.patch -cpufreq-CPUFREQ-19-ondemand-sys_freq_step.patch -cpufreq-CPUFREQ-21-ondemand-cleanups.patch -cpufreq-CPUFREQ-22-ondemand-store-idle-ticks-for-all-cpus.patch -cpufreq-CPUFREQ-23-ondemand-idle_tick-cleanup.patch -cpufreq-CPUFREQ-24-ondemand-automatic-downscaling.patch -cpufreq-CPUFREQ-25-ondemand-default-sampling-downfactor.patch -cpufreq-CPUFREQ-26-longhaul-disable-mastering.patch -cpufreq-CPUFREQ-27-longhaul-magic-port-frobbing.patch -cpufreq-CPUFREQ-28-longhaul-transition-latency.patch -cpufreq-CPUFREQ-29-longhaul-icky-evil-nasty-ide-dma-wait.patch -cpufreq-CPUFREQ-30-speedstep-lib-typos.patch +git-cpufreq.patch

As does cpufreq

+gregkh-i2c-i2c-tps6501x.patch
+gregkh-i2c-i2c-docs-update-1.patch
+gregkh-i2c-i2c-docs-update-2.patch
+gregkh-i2c-i2c-docs-update-3.patch

i2c tree updated

-bk-input.patch
+git-input.patch

The input tree is now in git

-git-ipsec.patch

The ipsec code is in git-net.patch

+git-libata-adma.patch
+git-libata-ahci-msi.patch
+git-libata-bridge-detect.patch
+git-libata-chs-support.patch
+git-libata-docs.patch
+git-libata-svw.patch
+git-libata-promise-sata-pata.patch
+git-libata-pdc2027x.patch

libata development trees

+git-net.patch

This is davem's post-2.6.12 tree

-git-netdev-8139cp.patch
-git-netdev-amd8111.patch
-git-netdev-e100.patch
-git-netdev-e1000.patch
-git-netdev-forcedeth.patch
-git-netdev-ieee80211.patch
+git-netdev-dm9000.patch
+git-netdev-hdlc.patch
-git-netdev-ixgb.patch
-git-netdev-orinoco.patch
+git-netdev-orinoco-hch.patch
-git-netdev-sis900.patch
-git-netdev-wifi.patch
+git-netdev-viro.patch
+git-netdev-we18-ieee80211-wifi.patch

Various things added and merged in netdev land.

+is_multicast_ether_addr-hack.patch
+wireless-device-attr-fixes.patch
+wireless-device-attr-fixes-2.patch
+ipw2100-old-gcc-fix.patch

Fix 'em up.

+tcp-fastroute-stats-remove.patch
+tcp-no-congestion.patch
+tcp-no-throttle.patch
+tcp-bigger-backlog.patch
+tcp-fix-weightp.patch
+tcp-tcp_super_tso_v3.patch
+tcp-tcp_infra.patch
+tcp-tcp_bic.patch
+tcp-tcp_westwood.patch
+tcp-hstcp.patch
+tcp-hybla.patch
+tcp-vegas.patch
+tcp-h-tcp.patch

Steve Hemminger's TCP enhancements.

+tcp-tcp_westwood-kconfig-fix.patch

Fix it.

+git-ocfs-fix-for-shemminger-tcp-stuff.patch

Fix OCFS for it, too.

+gregkh-pci-pci-hotplug-shpchp-_HPP-fix.patch
+gregkh-pci-pci-hotplug-shpchp-PERR-fix.patch
+gregkh-pci-pci-amd74xx-ids.patch
+gregkh-pci-pci-cpci-update.patch

PCI devel tree updates

+pci-do-via-irq-fixup-always-not-just-in-pic-mode.patch

VIA PCI fix

+git-scsi-misc-mptfusion-fix.patch
+git-scsi-misc-qla-build-fix.patch

Fix things in git-scsi-misc

+git-scsi-rc-fixes.patch

Pending 2.6.12 scsi fixes

+gregkh-usb-usb-sl811-hcd-fixes.patch +gregkh-usb-usb-sl811_cs.patch +gregkh-usb-usb-cp2101-flow-control.patch +gregkh-usb-usb-usbatm-reduce-log-spam.patch +gregkh-usb-usb-usbatm-avoid-oops-on-bind-failure.patch +gregkh-usb-usb-gadget-drain-rndis.patch

USB devel tree updated

+gregkh-usb-usb-usbatm-1-fix.patch

Fix it.

-zd1201-build-fix.patch

Drop this workaround again.

+sparsemem-memory-model-fix-3.patch

Fix sparsemem-memory-model.patch even more

+add-page_state-info-to-show_mem.patch +add-page_state-info-to-show_mem-warning-fixes.patch

Extra info in the sysrq-M output.

+avoiding-mmap-fragmentation-fix-3.patch

Fix avoiding-mmap-fragmentation-fix.patch again.

mmap-topdown-fix-for-large-stack-limit-large-allocation.patch

+x25-selective-sub-address-matching-with.patch +x25-selective-sub-address-matching-with-fix.patch

x25 feature work

+x25-fast-select-with-no-restriction-on.patch

Fix it.

+dmfe-warning-fix.patch

Fix a net driver warning.

+ppc32-added-support-for-new-mpc8548-family-of-powerquicc.patch +ppc32-added-preliminary-support-for-the-mpc8548-cds-board.patch +ppc32-apple-device-tree-bug-fix.patch +ppc32-ppc64-cleanup-proc-device-tree.patch

ppc32 updates

+ppc64-override-command-line-as-ld-cc-variables-when-adding-m64-and-co-for-biarch-compilers.patch +ppc64-use-cpu_has_feature-macro.patch
+ppc64-cleanup-spr-definitions.patch +ppc64-cleanup-iseries-runlight-support.patch
+ppc64-remove-decr_overclock.patch
+ppc64-fix-a-device-tree-bug-on-apples.patch

ppc64 updates

+i386-selectable-frequency-of-the-timer-interrupt-fix.patch

Fix i386-selectable-frequency-of-the-timer-interrupt.patch

+optimise-storage-of-read-mostly-variables-x86_64-fix-fix-fix.patch

Fix optimise-storage-of-read-mostly-variables-fix.patch some more

+ptrace_h8300-condition-bugfix.patch

h8/300 ptrace fix

+suspend-resume-smp-support-fix.patch
+suspend-resume-smp-support-fix-3.patch

More fixes for suspend-resume-smp-support.patch

+cpu-hotplug-printk-fix.patch +suspend-pci-power-managment-reference-implementation.patch +swsusp-only-allow-it-when-it-makes-sense.patch +update-video-after-suspend-documentation.patch

Various PM/hotplug fixes

+m32r-support-m3a-2170mappi-iii-platform.patch
+m32r-update-m32r_cfc-to-support-mappi-iii.patch

m32r additional platform support

+uml-add-and-use-generic-hw_controller_type-release.patch

UML fix

+cfq-cfq-elevator_insert_back-fix-fix.patch

Fix cfq-cfq-elevator_insert_back-fix.patch

+kprobes-ia64-cleanup.patch +kprobes-ia64-qp-fix.patch +kprobes-ia64-check-jprobe-break-before-handling.patch +kprobes-temporary-disarming-of-reentrant-probe-for-ia64.patch

Various fixes and updates for kprobes-on-ia64

-seccomp-disable-tsc-for-seccomp-enabled-tasks.patch

This was racy

+allow-ev_abs-to-work-in-uinputc.patch

Some input fix

+e1000-numa-aware-allocation-of-descriptors-v2.patch

Use node-local allocation in e1000.c

+gconfig-only-show-scrollbars-if-needed.patch

gconfig niceness

+potential-null-pointer-dereference-in-amiga-serial-driver.patch

Fix an oops which doesn't happen.

+add-offseth-to-dontdiff.patch

Don't generate diffs for offset.h. (Why is anyone using the dontdiff file anyway?)

+yenta-ti-turn-off-interrupts-during-card-power-on-more-2.patch

Fix obscure problems with TI cardbus controllers

+compat-introduce-compat_time_t.patch

Add compat_time_t

+namespacec-fix-mnt_namespace-zeroing-for-expired-mounts.patch +set-mnt_namespace-in-the-correct-place.patch +dcookiesc-use-proper-refcounting-functions.patch +namespace-rename-mnt_fslink-to-mnt_expire.patch +namespace-rename-_mntput-to-mntput_no_expire.patch

Continue fiddling with fs/namespace.c

+fix-tpm-driver-sysfs-owernship-changes-fix.patch +fix-tpm-driver-sysfs-owernship-changes-fix-2.patch +fix-tpm-driver-sysfs-owernship-changes-fix-3.patch

Fix the tpm driver fixes in -mm.

+dlm-lockspaces-callbacks-directory-build-fix.patch +dlm-lockspaces-callbacks-directory-fix.patch +dlm-lockspaces-callbacks-directory-fix-2.patch +dlm-debug-fs-no-debug-build-fix.patch

Fix various things in the DLM patches.

+fork-connector-send-status-to-userspace-fix.patch

Fix fork-connector-send-status-to-userspace.patch

+i2o-new-sysfs-attributes-and-adaptec-specific-block-fix-fix.patch

Fix i2o-new-sysfs-attributes-and-adaptec-specific-block-fix.patch

+i2o-build-fix.patch
+i2o-device-attribute-fixes.patch

More fixes for the i2o patches in -mm.

+add-generalized-dvb-usb-driver-fix-2.patch
+add-generalized-dvb-usb-driver-fix-3.patch

Fix add-generalized-dvb-usb-driver.patch

+pcmcia-allow-function-id-based-match-fix.patch

Fix pcmcia-allow-function-id-based-match.patch

+perfctr-seqlocks-for-mmaped-state-common.patch
+perfctr-seqlocks-for-mmaped-state-x86.patch
+perfctr-seqlocks-for-mmaped-state-ppc64.patch
+perfctr-seqlocks-for-mmaped-state-ppc32.patch

perfctr speedup

-sched-remove-set_tsk_need_resched-from-init_idle-v2.patch -sched-remove-set_tsk_need_resched-from-init_idle-v2-ia64-fix.patch +enable-preempt_bkl-on-preemptsmp-too.patch +sched-tweak-idle-thread-setup-semantics.patch +sched-smp-nice-bias-busy-queues-on-idle-rebalance.patch +sched-task_noninteractive.patch

Fiddle with the CPU scheduler

+video-for-linux-docummentation.patch

v4l documentation udpate

+intelfb-add-voffset-option-to-avoid-conficts-with-xorg-i810-driver.patch +intelfb-add-voffset-option-to-avoid-conficts-with-xorg-i810-driver-fix.patch +intelfb-fix-accel-detection-when-changing-video-modes.patch +intelfb-documentation.patch
+intelfb-documentation-fix.patch

fbdev driver updates

+md-remove-unneeded-null-checks-before-kfree.patch

raid cleanup

+modules-add-version-and-srcversion-to-sysfs.patch

Add module version info to sysfs

+drivers-media-common-saa7146_fopsc-make-a-function-static.patch +net-sctp-make-two-functions-static.patch +ll_merge_requests_fn-cleanup.patch +update-comment-about-gzip-scratch-size.patch +kill-signed-chars.patch
+printk-arch-i386-mm-pgtablec.patch +printk-arch-i386-mm-ioremapc.patch +sound-oss-esssolo1-use-the-dma_32bit_mask-constant.patch +sound-oss-es1371-use-the-dma_32bit_mask-constant.patch +sound-oss-es1370-use-the-dma_32bit_mask-constant.patch +sound-oss-cmpci-use-the-dma_32bit_mask-constant.patch +remove-duplicate-file-in-documentation-networking-drivers_net_wan_kconfig.patch +remove-duplicate-file-in-documentation-networking-00-index.patch +remove-duplicate-file-in-documentation-networking.patch

Little fixes

+sound-oss-sequencer_syms-unexport-reprogram_timer.patch

Kill an EXPORT_SYMBOL

number of patches in -mm: 1256
number of changesets in external trees: 73
number of patches in -mm only: 1252
total patches: 1325

All 1256 patches:

ftp://ftp.kernel.org/pub/linux/kernel/people/akpm/patches/2.6/2.6.12-rc5/2.6.12-rc5-mm2/patch-list

#1 lore raw
Quoted 4 lines · Andrew Morton

+add-offseth-to-dontdiff.patch

Don't generate diffs for offset.h. (Why is anyone using the dontdiff file anyway?)

Well, it's recommended it Documentation/SubmittingPatches. I don't know how else can I generate a diff for more than one file.

Michal

#2 lore raw
In reply to Andrew Morton

Alle 11:28, mercoledì 01 giugno 2005, Andrew Morton ha scritto:

Quoted 5 lines

ftp://ftp.kernel.org/pub/linux/kernel/people/akpm/patches/2.6/2.6.12-rc5/2. 6.12-rc5-mm2/

- Dropped bk-acpi.patch. Too old, too much breakage.

This made my asus-acpi work again.

DRM/DRI seems to have stopped working since -rc5-mm1.
-mm1 reported a badness in syslog (see my previous report int rc5-mm1 announcement thread), while now something is silently failing: glxinfo reports

libGL warning: 3D driver returned no fbconfigs. libGL error: InitDriver failed
libGL error: reverting to (slow) indirect rendering

while nothing is traced in syslog.

Linus' rc5 works fine instead.

Bye.

Signature · 1 line
Stefano Rivoir

#
# Automatically generated make config: don't edit
# Linux kernel version: 2.6.12-rc5-mm2
# Wed Jun 1 11:53:16 2005
#
CONFIG_X86=y
CONFIG_MMU=y
CONFIG_UID16=y
CONFIG_GENERIC_ISA_DMA=y
CONFIG_GENERIC_IOMAP=y

#
# Code maturity level options
#
CONFIG_EXPERIMENTAL=y
# CONFIG_CLEAN_COMPILE is not set
CONFIG_BROKEN=y
CONFIG_BROKEN_ON_SMP=y
CONFIG_LOCK_KERNEL=y
CONFIG_INIT_ENV_ARG_LIMIT=32

#
# General setup
#
CONFIG_LOCALVERSION=""
CONFIG_SWAP=y
CONFIG_SYSVIPC=y
CONFIG_POSIX_MQUEUE=y
CONFIG_BSD_PROCESS_ACCT=y
# CONFIG_BSD_PROCESS_ACCT_V3 is not set
CONFIG_SYSCTL=y
# CONFIG_AUDIT is not set
CONFIG_HOTPLUG=y
CONFIG_KOBJECT_UEVENT=y
# CONFIG_IKCONFIG is not set
# CONFIG_EMBEDDED is not set
CONFIG_KALLSYMS=y
# CONFIG_KALLSYMS_ALL is not set
# CONFIG_KALLSYMS_EXTRA_PASS is not set
CONFIG_PRINTK=y
CONFIG_BUG=y
CONFIG_BASE_FULL=y
CONFIG_FUTEX=y
CONFIG_EPOLL=y
CONFIG_SHMEM=y
CONFIG_CC_ALIGN_FUNCTIONS=0
CONFIG_CC_ALIGN_LABELS=0
CONFIG_CC_ALIGN_LOOPS=0
CONFIG_CC_ALIGN_JUMPS=0
# CONFIG_TINY_SHMEM is not set
CONFIG_BASE_SMALL=0

#
# Loadable module support
#
CONFIG_MODULES=y
CONFIG_MODULE_UNLOAD=y
# CONFIG_MODULE_FORCE_UNLOAD is not set
CONFIG_OBSOLETE_MODPARM=y
# CONFIG_MODVERSIONS is not set
# CONFIG_MODULE_SRCVERSION_ALL is not set
CONFIG_KMOD=y

#
# Processor type and features
#
CONFIG_X86_PC=y
# CONFIG_X86_ELAN is not set
# CONFIG_X86_VOYAGER is not set
# CONFIG_X86_NUMAQ is not set
# CONFIG_X86_SUMMIT is not set
# CONFIG_X86_BIGSMP is not set
# CONFIG_X86_VISWS is not set
# CONFIG_X86_GENERICARCH is not set
# CONFIG_X86_ES7000 is not set
# CONFIG_M386 is not set
# CONFIG_M486 is not set
# CONFIG_M586 is not set
# CONFIG_M586TSC is not set
# CONFIG_M586MMX is not set
# CONFIG_M686 is not set
# CONFIG_MPENTIUMII is not set
# CONFIG_MPENTIUMIII is not set
# CONFIG_MPENTIUMM is not set
CONFIG_MPENTIUM4=y
# CONFIG_MK6 is not set
# CONFIG_MK7 is not set
# CONFIG_MK8 is not set
# CONFIG_MCRUSOE is not set
# CONFIG_MEFFICEON is not set
# CONFIG_MWINCHIPC6 is not set
# CONFIG_MWINCHIP2 is not set
# CONFIG_MWINCHIP3D is not set
# CONFIG_MGEODEGX1 is not set
# CONFIG_MCYRIXIII is not set
# CONFIG_MVIAC3_2 is not set
# CONFIG_X86_GENERIC is not set
CONFIG_X86_CMPXCHG=y
CONFIG_X86_XADD=y
CONFIG_X86_L1_CACHE_SHIFT=7
CONFIG_RWSEM_XCHGADD_ALGORITHM=y
CONFIG_GENERIC_CALIBRATE_DELAY=y
CONFIG_X86_WP_WORKS_OK=y
CONFIG_X86_INVLPG=y
CONFIG_X86_BSWAP=y
CONFIG_X86_POPAD_OK=y
CONFIG_X86_GOOD_APIC=y
CONFIG_X86_INTEL_USERCOPY=y
CONFIG_X86_USE_PPRO_CHECKSUM=y
# CONFIG_HPET_TIMER is not set
# CONFIG_SMP is not set
# CONFIG_PREEMPT_NONE is not set
# CONFIG_PREEMPT_VOLUNTARY is not set
CONFIG_PREEMPT=y
CONFIG_PREEMPT_BKL=y
# CONFIG_X86_UP_APIC is not set
CONFIG_X86_TSC=y
CONFIG_X86_MCE=y
# CONFIG_X86_MCE_NONFATAL is not set
# CONFIG_TOSHIBA is not set
# CONFIG_I8K is not set
# CONFIG_X86_REBOOTFIXUPS is not set
# CONFIG_MICROCODE is not set
# CONFIG_X86_MSR is not set
# CONFIG_X86_CPUID is not set

#
# Firmware Drivers
#
# CONFIG_EDD is not set
CONFIG_NOHIGHMEM=y
# CONFIG_HIGHMEM4G is not set
# CONFIG_HIGHMEM64G is not set
CONFIG_SELECT_MEMORY_MODEL=y
CONFIG_FLATMEM_MANUAL=y
# CONFIG_DISCONTIGMEM_MANUAL is not set
# CONFIG_SPARSEMEM_MANUAL is not set
CONFIG_FLATMEM=y
CONFIG_FLAT_NODE_MEM_MAP=y
CONFIG_HAVE_ARCH_EARLY_PFN_TO_NID=y
# CONFIG_MATH_EMULATION is not set
CONFIG_MTRR=y
# CONFIG_EFI is not set
CONFIG_HAVE_DEC_LOCK=y
CONFIG_REGPARM=y
CONFIG_SECCOMP=y
# CONFIG_HZ_100 is not set
CONFIG_HZ_250=y
# CONFIG_HZ_1000 is not set
CONFIG_HZ=250

#
# Performance-monitoring counters support
#
# CONFIG_PERFCTR is not set
CONFIG_PHYSICAL_START=0x100000
# CONFIG_KEXEC is not set

#
# Power management options (ACPI, APM)
#
CONFIG_PM=y
# CONFIG_PM_DEBUG is not set
# CONFIG_SOFTWARE_SUSPEND is not set

#
# ACPI (Advanced Configuration and Power Interface) Support #
CONFIG_ACPI=y
CONFIG_ACPI_BOOT=y
CONFIG_ACPI_INTERPRETER=y
CONFIG_ACPI_SLEEP=y
CONFIG_ACPI_SLEEP_PROC_FS=y
CONFIG_ACPI_AC=m
CONFIG_ACPI_BATTERY=m
CONFIG_ACPI_BUTTON=m
CONFIG_ACPI_VIDEO=m
CONFIG_ACPI_FAN=m
CONFIG_ACPI_PROCESSOR=m
CONFIG_ACPI_THERMAL=m
CONFIG_ACPI_ASUS=m
# CONFIG_ACPI_IBM is not set
# CONFIG_ACPI_TOSHIBA is not set
# CONFIG_ACPI_CUSTOM_DSDT is not set CONFIG_ACPI_BLACKLIST_YEAR=0
# CONFIG_ACPI_DEBUG is not set
CONFIG_ACPI_BUS=y
CONFIG_ACPI_EC=y
CONFIG_ACPI_POWER=y
CONFIG_ACPI_PCI=y
CONFIG_ACPI_SYSTEM=y
# CONFIG_X86_PM_TIMER is not set
# CONFIG_ACPI_CONTAINER is not set

#
# APM (Advanced Power Management) BIOS Support
#
# CONFIG_APM is not set

#
# CPU Frequency scaling
#
# CONFIG_CPU_FREQ is not set

#
# Bus options (PCI, PCMCIA, EISA, MCA, ISA)
#
CONFIG_PCI=y
# CONFIG_PCI_GOBIOS is not set
# CONFIG_PCI_GOMMCONFIG is not set
# CONFIG_PCI_GODIRECT is not set
CONFIG_PCI_GOANY=y
CONFIG_PCI_BIOS=y
CONFIG_PCI_DIRECT=y
CONFIG_PCI_MMCONFIG=y
# CONFIG_PCIEPORTBUS is not set
# CONFIG_PCI_LEGACY_PROC is not set
CONFIG_PCI_NAMES=y
# CONFIG_PCI_DEBUG is not set
CONFIG_ISA_DMA_API=y
# CONFIG_ISA is not set
# CONFIG_MCA is not set
# CONFIG_SCx200 is not set

#
# PCCARD (PCMCIA/CardBus) support
#
CONFIG_PCCARD=m
# CONFIG_PCMCIA_DEBUG is not set
CONFIG_PCMCIA=m
CONFIG_PCMCIA_LOAD_CIS=y
CONFIG_PCMCIA_IOCTL=y
CONFIG_CARDBUS=y

#
# PC-card bridges
#
CONFIG_YENTA=m
# CONFIG_PD6729 is not set
# CONFIG_I82092 is not set
# CONFIG_TCIC is not set
CONFIG_PCCARD_NONSTATIC=m

#
# PCI Hotplug Support
#
CONFIG_HOTPLUG_PCI=m
# CONFIG_HOTPLUG_PCI_FAKE is not set
# CONFIG_HOTPLUG_PCI_COMPAQ is not set
CONFIG_HOTPLUG_PCI_ACPI=m
# CONFIG_HOTPLUG_PCI_ACPI_IBM is not set
# CONFIG_HOTPLUG_PCI_CPCI is not set
# CONFIG_HOTPLUG_PCI_SHPC is not set

#
# Executable file formats
#
CONFIG_BINFMT_ELF=y
CONFIG_BINFMT_AOUT=m
CONFIG_BINFMT_MISC=m

#
# Device Drivers
#

#
# Generic Driver Options
#
# CONFIG_STANDALONE is not set
# CONFIG_PREVENT_FIRMWARE_BUILD is not set
CONFIG_FW_LOADER=m
# CONFIG_DEBUG_DRIVER is not set

#
# Connector - unified userspace <-> kernelspace linker #
CONFIG_CONNECTOR=y
CONFIG_FORK_CONNECTOR=y

#
# Memory Technology Devices (MTD)
#
# CONFIG_MTD is not set

#
# Parallel port support
#
CONFIG_PARPORT=m
CONFIG_PARPORT_PC=m
# CONFIG_PARPORT_SERIAL is not set
# CONFIG_PARPORT_PC_FIFO is not set
# CONFIG_PARPORT_PC_SUPERIO is not set
# CONFIG_PARPORT_PC_PCMCIA is not set
# CONFIG_PARPORT_GSC is not set
# CONFIG_PARPORT_1284 is not set

#
# Plug and Play support
#
CONFIG_PNP=y
# CONFIG_PNP_DEBUG is not set

#
# Protocols
#
CONFIG_PNPACPI=y

#
# Block devices
#
CONFIG_BLK_DEV_FD=m
# CONFIG_PARIDE is not set
# CONFIG_BLK_CPQ_DA is not set
# CONFIG_BLK_CPQ_CISS_DA is not set
# CONFIG_BLK_DEV_DAC960 is not set
# CONFIG_BLK_DEV_UMEM is not set
# CONFIG_BLK_DEV_COW_COMMON is not set
CONFIG_BLK_DEV_LOOP=m
# CONFIG_BLK_DEV_CRYPTOLOOP is not set
CONFIG_BLK_DEV_NBD=m
# CONFIG_BLK_DEV_SX8 is not set
# CONFIG_BLK_DEV_UB is not set
# CONFIG_BLK_DEV_RAM is not set
CONFIG_BLK_DEV_RAM_COUNT=16
CONFIG_INITRAMFS_SOURCE=""
# CONFIG_LBD is not set
CONFIG_CDROM_PKTCDVD=y
CONFIG_CDROM_PKTCDVD_BUFFERS=8
# CONFIG_CDROM_PKTCDVD_WCACHE is not set

#
# IO Schedulers
#
CONFIG_IOSCHED_NOOP=y
CONFIG_IOSCHED_AS=y
CONFIG_IOSCHED_DEADLINE=y
CONFIG_IOSCHED_CFQ=y
# CONFIG_ATA_OVER_ETH is not set

#
# ATA/ATAPI/MFM/RLL support
#
CONFIG_IDE=y
CONFIG_BLK_DEV_IDE=y

#
# Please see Documentation/ide.txt for help/info on IDE drives #
# CONFIG_BLK_DEV_IDE_SATA is not set
# CONFIG_BLK_DEV_HD_IDE is not set CONFIG_BLK_DEV_IDEDISK=y
CONFIG_IDEDISK_MULTI_MODE=y
# CONFIG_BLK_DEV_IDECS is not set CONFIG_BLK_DEV_IDECD=m
# CONFIG_BLK_DEV_IDETAPE is not set
# CONFIG_BLK_DEV_IDEFLOPPY is not set
# CONFIG_BLK_DEV_IDESCSI is not set
# CONFIG_IDE_TASK_IOCTL is not set

#
# IDE chipset support/bugfixes
#
CONFIG_IDE_GENERIC=y
# CONFIG_BLK_DEV_CMD640 is not set
CONFIG_BLK_DEV_IDEPNP=y
CONFIG_BLK_DEV_IDEPCI=y
CONFIG_IDEPCI_SHARE_IRQ=y
# CONFIG_BLK_DEV_OFFBOARD is not set
CONFIG_BLK_DEV_GENERIC=y
# CONFIG_BLK_DEV_OPTI621 is not set
# CONFIG_BLK_DEV_RZ1000 is not set
CONFIG_BLK_DEV_IDEDMA_PCI=y
# CONFIG_BLK_DEV_IDEDMA_FORCED is not set
CONFIG_IDEDMA_PCI_AUTO=y
# CONFIG_IDEDMA_ONLYDISK is not set
# CONFIG_BLK_DEV_AEC62XX is not set
# CONFIG_BLK_DEV_ALI15X3 is not set
# CONFIG_BLK_DEV_AMD74XX is not set
# CONFIG_BLK_DEV_ATIIXP is not set
# CONFIG_BLK_DEV_CMD64X is not set
# CONFIG_BLK_DEV_TRIFLEX is not set
# CONFIG_BLK_DEV_CY82C693 is not set
# CONFIG_BLK_DEV_CS5520 is not set
# CONFIG_BLK_DEV_CS5530 is not set
# CONFIG_BLK_DEV_HPT34X is not set
# CONFIG_BLK_DEV_HPT366 is not set
# CONFIG_BLK_DEV_SC1200 is not set
# CONFIG_BLK_DEV_PIIX is not set
# CONFIG_BLK_DEV_NS87415 is not set
# CONFIG_BLK_DEV_PDC202XX_OLD is not set
# CONFIG_BLK_DEV_PDC202XX_NEW is not set
# CONFIG_BLK_DEV_SVWKS is not set
# CONFIG_BLK_DEV_SIIMAGE is not set
CONFIG_BLK_DEV_SIS5513=y
# CONFIG_BLK_DEV_SLC90E66 is not set
# CONFIG_BLK_DEV_TRM290 is not set
# CONFIG_BLK_DEV_VIA82CXXX is not set
# CONFIG_IDE_ARM is not set
CONFIG_BLK_DEV_IDEDMA=y
# CONFIG_IDEDMA_IVB is not set
CONFIG_IDEDMA_AUTO=y
# CONFIG_BLK_DEV_HD is not set

#
# SCSI device support
#
CONFIG_SCSI=m
CONFIG_SCSI_PROC_FS=y

#
# SCSI support type (disk, tape, CD-ROM)
#
CONFIG_BLK_DEV_SD=m
# CONFIG_CHR_DEV_ST is not set
# CONFIG_CHR_DEV_OSST is not set
# CONFIG_BLK_DEV_SR is not set
CONFIG_CHR_DEV_SG=m
# CONFIG_CHR_DEV_SCH is not set

#
# Some SCSI devices (e.g. CD jukebox) support multiple LUNs #
CONFIG_SCSI_MULTI_LUN=y
# CONFIG_SCSI_CONSTANTS is not set
# CONFIG_SCSI_LOGGING is not set

#
# SCSI Transport Attributes
#
# CONFIG_SCSI_SPI_ATTRS is not set
# CONFIG_SCSI_FC_ATTRS is not set
# CONFIG_SCSI_ISCSI_ATTRS is not set

#
# SCSI low-level drivers
#
# CONFIG_BLK_DEV_3W_XXXX_RAID is not set
# CONFIG_SCSI_3W_9XXX is not set
# CONFIG_SCSI_ARCMSR is not set
# CONFIG_SCSI_ACARD is not set
# CONFIG_SCSI_AACRAID is not set
# CONFIG_SCSI_AIC7XXX is not set
# CONFIG_SCSI_AIC7XXX_OLD is not set
# CONFIG_SCSI_AIC79XX is not set
# CONFIG_SCSI_DPT_I2O is not set
# CONFIG_SCSI_ADVANSYS is not set
# CONFIG_MEGARAID_NEWGEN is not set
# CONFIG_MEGARAID_LEGACY is not set
# CONFIG_MEGARAID_SAS is not set
# CONFIG_SCSI_SATA is not set
# CONFIG_SCSI_BUSLOGIC is not set
# CONFIG_SCSI_CPQFCTS is not set
# CONFIG_SCSI_DMX3191D is not set
# CONFIG_SCSI_EATA is not set
# CONFIG_SCSI_EATA_PIO is not set
# CONFIG_SCSI_FUTURE_DOMAIN is not set
# CONFIG_SCSI_GDTH is not set
# CONFIG_SCSI_IPS is not set
# CONFIG_SCSI_INITIO is not set
# CONFIG_SCSI_INIA100 is not set
# CONFIG_SCSI_PPA is not set
# CONFIG_SCSI_IMM is not set
# CONFIG_SCSI_SYM53C8XX_2 is not set
# CONFIG_SCSI_IPR is not set
# CONFIG_SCSI_QLOGIC_ISP is not set
# CONFIG_SCSI_QLOGIC_FC is not set
# CONFIG_SCSI_QLOGIC_1280 is not set
CONFIG_SCSI_QLA2XXX=m
# CONFIG_SCSI_QLA21XX is not set
# CONFIG_SCSI_QLA22XX is not set
# CONFIG_SCSI_QLA2300 is not set
# CONFIG_SCSI_QLA2322 is not set
# CONFIG_SCSI_QLA6312 is not set
# CONFIG_SCSI_LPFC is not set
# CONFIG_SCSI_DC395x is not set
# CONFIG_SCSI_DC390T is not set
# CONFIG_SCSI_NSP32 is not set
# CONFIG_SCSI_DEBUG is not set

#
# PCMCIA SCSI adapter support
#
# CONFIG_PCMCIA_AHA152X is not set
# CONFIG_PCMCIA_FDOMAIN is not set
# CONFIG_PCMCIA_NINJA_SCSI is not set
# CONFIG_PCMCIA_QLOGIC is not set
# CONFIG_PCMCIA_SYM53C500 is not set

#
# Multi-device support (RAID and LVM)
#
# CONFIG_MD is not set

#
# Fusion MPT device support
#
# CONFIG_FUSION is not set
# CONFIG_FUSION_SPI is not set
# CONFIG_FUSION_FC is not set

#
# IEEE 1394 (FireWire) support
#
CONFIG_IEEE1394=m

#
# Subsystem Options
#
# CONFIG_IEEE1394_VERBOSEDEBUG is not set
# CONFIG_IEEE1394_OUI_DB is not set
# CONFIG_IEEE1394_EXTRA_CONFIG_ROMS is not set

#
# Device Drivers
#

#
# Texas Instruments PCILynx requires I2C
#
CONFIG_IEEE1394_OHCI1394=m

#
# Protocol Drivers
#
CONFIG_IEEE1394_VIDEO1394=m
CONFIG_IEEE1394_SBP2=m
# CONFIG_IEEE1394_SBP2_PHYS_DMA is not set
# CONFIG_IEEE1394_ETH1394 is not set
CONFIG_IEEE1394_DV1394=m
CONFIG_IEEE1394_RAWIO=m
CONFIG_IEEE1394_CMP=m
CONFIG_IEEE1394_AMDTP=m

#
# I2O device support
#
# CONFIG_I2O is not set

#
# Networking support
#
CONFIG_NET=y

#
# Networking options
#
CONFIG_PACKET=y
CONFIG_PACKET_MMAP=y
CONFIG_UNIX=y
# CONFIG_NET_KEY is not set
CONFIG_INET=y
# CONFIG_IP_MULTICAST is not set
# CONFIG_IP_ADVANCED_ROUTER is not set
# CONFIG_IP_PNP is not set
# CONFIG_NET_IPIP is not set
# CONFIG_NET_IPGRE is not set
# CONFIG_ARPD is not set
CONFIG_SYN_COOKIES=y
# CONFIG_INET_AH is not set
# CONFIG_INET_ESP is not set
# CONFIG_INET_IPCOMP is not set
# CONFIG_INET_TUNNEL is not set
# CONFIG_IP_TCPDIAG is not set
# CONFIG_IP_TCPDIAG_IPV6 is not set

#
# TCP congestion control
#
# CONFIG_TCP_CONG_BIC is not set
# CONFIG_TCP_CONG_WESTWOOD is not set
# CONFIG_TCP_CONG_HTCP is not set
# CONFIG_TCP_CONG_HSTCP is not set
# CONFIG_TCP_CONG_HYBLA is not set
# CONFIG_TCP_CONG_VEGAS is not set

#
# IP: Virtual Server Configuration
#
# CONFIG_IP_VS is not set
# CONFIG_IPV6 is not set
CONFIG_NETFILTER=y
# CONFIG_NETFILTER_DEBUG is not set

#
# IP: Netfilter Configuration
#
CONFIG_IP_NF_CONNTRACK=m
# CONFIG_IP_NF_CT_ACCT is not set
# CONFIG_IP_NF_CONNTRACK_MARK is not set
# CONFIG_IP_NF_CT_PROTO_SCTP is not set
CONFIG_IP_NF_FTP=m
CONFIG_IP_NF_IRC=m
# CONFIG_IP_NF_TFTP is not set
# CONFIG_IP_NF_AMANDA is not set
# CONFIG_IP_NF_QUEUE is not set
CONFIG_IP_NF_IPTABLES=m
CONFIG_IP_NF_MATCH_LIMIT=m
# CONFIG_IP_NF_MATCH_IPRANGE is not set
CONFIG_IP_NF_MATCH_MAC=m
# CONFIG_IP_NF_MATCH_PKTTYPE is not set
CONFIG_IP_NF_MATCH_MARK=m
CONFIG_IP_NF_MATCH_MULTIPORT=m
# CONFIG_IP_NF_MATCH_TOS is not set
# CONFIG_IP_NF_MATCH_RECENT is not set
# CONFIG_IP_NF_MATCH_ECN is not set
# CONFIG_IP_NF_MATCH_DSCP is not set
# CONFIG_IP_NF_MATCH_AH_ESP is not set
# CONFIG_IP_NF_MATCH_LENGTH is not set
# CONFIG_IP_NF_MATCH_TTL is not set
# CONFIG_IP_NF_MATCH_TCPMSS is not set
# CONFIG_IP_NF_MATCH_HELPER is not set
CONFIG_IP_NF_MATCH_STATE=m
# CONFIG_IP_NF_MATCH_CONNTRACK is not set
# CONFIG_IP_NF_MATCH_OWNER is not set
# CONFIG_IP_NF_MATCH_ADDRTYPE is not set
# CONFIG_IP_NF_MATCH_REALM is not set
# CONFIG_IP_NF_MATCH_SCTP is not set
# CONFIG_IP_NF_MATCH_COMMENT is not set
# CONFIG_IP_NF_MATCH_HASHLIMIT is not set
CONFIG_IP_NF_FILTER=m
CONFIG_IP_NF_TARGET_REJECT=m
CONFIG_IP_NF_TARGET_LOG=m
# CONFIG_IP_NF_TARGET_ULOG is not set
# CONFIG_IP_NF_TARGET_TCPMSS is not set
CONFIG_IP_NF_NAT=m
CONFIG_IP_NF_NAT_NEEDED=y
CONFIG_IP_NF_TARGET_MASQUERADE=m
CONFIG_IP_NF_TARGET_REDIRECT=m
# CONFIG_IP_NF_TARGET_NETMAP is not set
# CONFIG_IP_NF_TARGET_SAME is not set
# CONFIG_IP_NF_NAT_SNMP_BASIC is not set
CONFIG_IP_NF_NAT_IRC=m
CONFIG_IP_NF_NAT_FTP=m
CONFIG_IP_NF_MANGLE=m
CONFIG_IP_NF_TARGET_TOS=m
# CONFIG_IP_NF_TARGET_ECN is not set
# CONFIG_IP_NF_TARGET_DSCP is not set
# CONFIG_IP_NF_TARGET_MARK is not set
# CONFIG_IP_NF_TARGET_CLASSIFY is not set
# CONFIG_IP_NF_RAW is not set
# CONFIG_IP_NF_ARPTABLES is not set

#
# SCTP Configuration (EXPERIMENTAL)
#
# CONFIG_IP_SCTP is not set
# CONFIG_ATM is not set
# CONFIG_BRIDGE is not set
# CONFIG_VLAN_8021Q is not set
# CONFIG_DECNET is not set
# CONFIG_LLC2 is not set
# CONFIG_IPX is not set
# CONFIG_ATALK is not set
# CONFIG_X25 is not set
# CONFIG_LAPB is not set
# CONFIG_NET_DIVERT is not set
# CONFIG_ECONET is not set
# CONFIG_WAN_ROUTER is not set

#
# QoS and/or fair queueing
#
# CONFIG_NET_SCHED is not set
# CONFIG_NET_CLS_ROUTE is not set

#
# Network testing
#
# CONFIG_NET_PKTGEN is not set
# CONFIG_KGDBOE is not set
# CONFIG_NETPOLL is not set
# CONFIG_NETPOLL_RX is not set
# CONFIG_NETPOLL_TRAP is not set
# CONFIG_NET_POLL_CONTROLLER is not set
# CONFIG_HAMRADIO is not set
# CONFIG_IRDA is not set
# CONFIG_BT is not set
# CONFIG_IEEE80211 is not set
CONFIG_NETDEVICES=y
CONFIG_DUMMY=m
# CONFIG_BONDING is not set
# CONFIG_EQUALIZER is not set
# CONFIG_TUN is not set
# CONFIG_NET_SB1000 is not set

#
# ARCnet devices
#
# CONFIG_ARCNET is not set

#
# Ethernet (10 or 100Mbit)
#
CONFIG_NET_ETHERNET=y
CONFIG_MII=m
# CONFIG_HAPPYMEAL is not set
# CONFIG_SUNGEM is not set
# CONFIG_NET_VENDOR_3COM is not set

#
# Tulip family network device support
#
# CONFIG_NET_TULIP is not set
# CONFIG_HP100 is not set
CONFIG_NET_PCI=y
# CONFIG_PCNET32 is not set
# CONFIG_AMD8111_ETH is not set
# CONFIG_ADAPTEC_STARFIRE is not set
# CONFIG_B44 is not set
# CONFIG_FORCEDETH is not set
# CONFIG_DGRS is not set
CONFIG_EEPRO100=m
# CONFIG_E100 is not set
# CONFIG_FEALNX is not set
# CONFIG_NATSEMI is not set
CONFIG_NE2K_PCI=m
CONFIG_8139CP=m
CONFIG_8139TOO=m
# CONFIG_8139TOO_PIO is not set
# CONFIG_8139TOO_TUNE_TWISTER is not set
# CONFIG_8139TOO_8129 is not set
# CONFIG_8139_OLD_RX_RESET is not set
# CONFIG_SIS900 is not set
# CONFIG_EPIC100 is not set
# CONFIG_SUNDANCE is not set
# CONFIG_TLAN is not set
# CONFIG_VIA_RHINE is not set

#
# Ethernet (1000 Mbit)
#
# CONFIG_ACENIC is not set
# CONFIG_DL2K is not set
# CONFIG_E1000 is not set
# CONFIG_NS83820 is not set
# CONFIG_HAMACHI is not set
# CONFIG_YELLOWFIN is not set
# CONFIG_R8169 is not set
CONFIG_SKGE=m
CONFIG_SK98LIN=m
# CONFIG_VIA_VELOCITY is not set
# CONFIG_TIGON3 is not set
# CONFIG_BNX2 is not set

#
# Ethernet (10000 Mbit)
#
# CONFIG_CHELSIO_T1 is not set
# CONFIG_IXGB is not set
# CONFIG_S2IO is not set

#
# Token Ring devices
#
# CONFIG_TR is not set

#
# Wireless LAN (non-hamradio)
#
# CONFIG_NET_RADIO is not set

#
# PCMCIA network device support
#
# CONFIG_NET_PCMCIA is not set

#
# Wan interfaces
#
# CONFIG_WAN is not set
# CONFIG_FDDI is not set
# CONFIG_HIPPI is not set
# CONFIG_PLIP is not set
# CONFIG_PPP is not set
# CONFIG_SLIP is not set
# CONFIG_NET_FC is not set
# CONFIG_SHAPER is not set
# CONFIG_NETCONSOLE is not set

#
# ISDN subsystem
#
# CONFIG_ISDN is not set

#
# Telephony Support
#
# CONFIG_PHONE is not set

#
# Input device support
#
CONFIG_INPUT=y

#
# Userland interfaces
#
CONFIG_INPUT_MOUSEDEV=y
CONFIG_INPUT_MOUSEDEV_PSAUX=y
CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
CONFIG_INPUT_JOYDEV=y
# CONFIG_INPUT_TSDEV is not set
CONFIG_INPUT_EVDEV=m
# CONFIG_INPUT_EVBUG is not set

#
# Input Device Drivers
#
CONFIG_INPUT_KEYBOARD=y
CONFIG_KEYBOARD_ATKBD=y
# CONFIG_KEYBOARD_SUNKBD is not set
# CONFIG_KEYBOARD_LKKBD is not set
# CONFIG_KEYBOARD_XTKBD is not set
# CONFIG_KEYBOARD_NEWTON is not set
CONFIG_INPUT_MOUSE=y
CONFIG_MOUSE_PS2=y
# CONFIG_MOUSE_SERIAL is not set
# CONFIG_MOUSE_VSXXXAA is not set
# CONFIG_INPUT_JOYSTICK is not set
# CONFIG_INPUT_TOUCHSCREEN is not set
CONFIG_INPUT_MISC=y
CONFIG_INPUT_PCSPKR=m
# CONFIG_INPUT_UINPUT is not set

#
# Hardware I/O ports
#
CONFIG_SERIO=y
CONFIG_SERIO_I8042=y
CONFIG_SERIO_SERPORT=y
# CONFIG_SERIO_CT82C710 is not set
# CONFIG_SERIO_PARKBD is not set
# CONFIG_SERIO_PCIPS2 is not set
CONFIG_SERIO_LIBPS2=y
# CONFIG_SERIO_RAW is not set
# CONFIG_GAMEPORT is not set

#
# Character devices
#
CONFIG_VT=y
CONFIG_VT_CONSOLE=y
CONFIG_HW_CONSOLE=y
# CONFIG_SERIAL_NONSTANDARD is not set

#
# Serial drivers
#
CONFIG_SERIAL_8250=m
# CONFIG_SERIAL_8250_CS is not set
# CONFIG_SERIAL_8250_ACPI is not set
CONFIG_SERIAL_8250_NR_UARTS=4
# CONFIG_SERIAL_8250_EXTENDED is not set

#
# Non-8250 serial port support
#
CONFIG_SERIAL_CORE=m
# CONFIG_SERIAL_JSM is not set
CONFIG_UNIX98_PTYS=y
CONFIG_LEGACY_PTYS=y
CONFIG_LEGACY_PTY_COUNT=256
CONFIG_PRINTER=m
# CONFIG_LP_CONSOLE is not set
# CONFIG_PPDEV is not set
# CONFIG_TIPAR is not set

#
# IPMI
#
# CONFIG_IPMI_HANDLER is not set

#
# Watchdog Cards
#
# CONFIG_WATCHDOG is not set
CONFIG_HW_RANDOM=m
# CONFIG_NVRAM is not set
# CONFIG_RTC is not set
# CONFIG_GEN_RTC is not set
# CONFIG_DTLK is not set
# CONFIG_R3964 is not set
# CONFIG_APPLICOM is not set
# CONFIG_SONYPI is not set

#
# Ftape, the floppy tape device driver
#
# CONFIG_FTAPE is not set
CONFIG_AGP=m
# CONFIG_AGP_ALI is not set
# CONFIG_AGP_ATI is not set
# CONFIG_AGP_AMD is not set
# CONFIG_AGP_AMD64 is not set
# CONFIG_AGP_INTEL is not set
# CONFIG_AGP_NVIDIA is not set
CONFIG_AGP_SIS=m
# CONFIG_AGP_SWORKS is not set
# CONFIG_AGP_VIA is not set
# CONFIG_AGP_EFFICEON is not set
CONFIG_DRM=m
# CONFIG_DRM_TDFX is not set
# CONFIG_DRM_GAMMA is not set
# CONFIG_DRM_R128 is not set
CONFIG_DRM_RADEON=m
# CONFIG_DRM_MGA is not set
# CONFIG_DRM_SIS is not set
# CONFIG_DRM_VIA is not set

#
# PCMCIA character devices
#
# CONFIG_SYNCLINK_CS is not set
# CONFIG_MWAVE is not set
# CONFIG_RAW_DRIVER is not set
# CONFIG_HPET is not set
# CONFIG_HANGCHECK_TIMER is not set

#
# TPM devices
#
# CONFIG_TCG_TPM is not set

#
# I2C support
#
# CONFIG_I2C is not set

#
# Dallas's 1-wire bus
#
# CONFIG_W1 is not set

#
# Misc devices
#
# CONFIG_IBM_ASM is not set

#
# Multimedia devices
#
# CONFIG_VIDEO_DEV is not set

#
# Digital Video Broadcasting Devices
#
# CONFIG_DVB is not set

#
# Graphics support
#
CONFIG_FB=y
CONFIG_FB_CFB_FILLRECT=y
CONFIG_FB_CFB_COPYAREA=y
CONFIG_FB_CFB_IMAGEBLIT=y
CONFIG_FB_SOFT_CURSOR=y
# CONFIG_FB_MACMODES is not set
CONFIG_FB_MODE_HELPERS=y
# CONFIG_FB_TILEBLITTING is not set
# CONFIG_FB_CIRRUS is not set
# CONFIG_FB_PM2 is not set
# CONFIG_FB_CYBER2000 is not set
# CONFIG_FB_ASILIANT is not set
# CONFIG_FB_IMSTT is not set
# CONFIG_FB_VGA16 is not set
# CONFIG_FB_VESA is not set
CONFIG_VIDEO_SELECT=y
# CONFIG_FB_HGA is not set
# CONFIG_FB_NVIDIA is not set
# CONFIG_FB_RIVA is not set
# CONFIG_FB_I810 is not set
# CONFIG_FB_INTEL is not set
# CONFIG_FB_MATROX is not set
# CONFIG_FB_RADEON_OLD is not set
CONFIG_FB_RADEON=y
# CONFIG_FB_RADEON_I2C is not set
# CONFIG_FB_RADEON_DEBUG is not set
# CONFIG_FB_ATY128 is not set
# CONFIG_FB_ATY is not set
# CONFIG_FB_SAVAGE is not set
# CONFIG_FB_SIS is not set
# CONFIG_FB_NEOMAGIC is not set
# CONFIG_FB_KYRO is not set
# CONFIG_FB_3DFX is not set
# CONFIG_FB_VOODOO1 is not set
# CONFIG_FB_TRIDENT is not set
# CONFIG_FB_PM3 is not set
# CONFIG_FB_GEODE is not set
# CONFIG_FB_S1D13XXX is not set
# CONFIG_FB_VIRTUAL is not set

#
# Console display driver support
#
CONFIG_VGA_CONSOLE=y
CONFIG_DUMMY_CONSOLE=y
CONFIG_FRAMEBUFFER_CONSOLE=y
CONFIG_FONTS=y
# CONFIG_FONT_8x8 is not set
CONFIG_FONT_8x16=y
CONFIG_FONT_6x11=y
CONFIG_FONT_PEARL_8x8=y
CONFIG_FONT_ACORN_8x8=y
CONFIG_FONT_MINI_4x6=y
CONFIG_FONT_SUN8x16=y
CONFIG_FONT_SUN12x22=y

#
# Logo configuration
#
# CONFIG_LOGO is not set
# CONFIG_BACKLIGHT_LCD_SUPPORT is not set

#
# Sound
#
CONFIG_SOUND=m

#
# Advanced Linux Sound Architecture
#
CONFIG_SND=m
CONFIG_SND_TIMER=m
CONFIG_SND_PCM=m
CONFIG_SND_RAWMIDI=m
CONFIG_SND_SEQUENCER=m
# CONFIG_SND_SEQ_DUMMY is not set
CONFIG_SND_OSSEMUL=y
CONFIG_SND_MIXER_OSS=m
CONFIG_SND_PCM_OSS=m
CONFIG_SND_SEQUENCER_OSS=y
# CONFIG_SND_VERBOSE_PRINTK is not set
# CONFIG_SND_DEBUG is not set

#
# Generic devices
#
CONFIG_SND_MPU401_UART=m
# CONFIG_SND_DUMMY is not set
# CONFIG_SND_VIRMIDI is not set
# CONFIG_SND_MTPAV is not set
CONFIG_SND_SERIAL_U16550=m
CONFIG_SND_MPU401=m

#
# PCI devices
#
CONFIG_SND_AC97_CODEC=m
# CONFIG_SND_ALI5451 is not set
# CONFIG_SND_ATIIXP is not set
# CONFIG_SND_ATIIXP_MODEM is not set
# CONFIG_SND_AU8810 is not set
# CONFIG_SND_AU8820 is not set
# CONFIG_SND_AU8830 is not set
# CONFIG_SND_AZT3328 is not set
# CONFIG_SND_BT87X is not set
# CONFIG_SND_CS46XX is not set
# CONFIG_SND_CS4281 is not set
# CONFIG_SND_EMU10K1 is not set
# CONFIG_SND_EMU10K1X is not set
# CONFIG_SND_CA0106 is not set
# CONFIG_SND_KORG1212 is not set
# CONFIG_SND_MIXART is not set
# CONFIG_SND_NM256 is not set
# CONFIG_SND_RME32 is not set
# CONFIG_SND_RME96 is not set
# CONFIG_SND_RME9652 is not set
# CONFIG_SND_HDSP is not set
# CONFIG_SND_TRIDENT is not set
# CONFIG_SND_YMFPCI is not set
# CONFIG_SND_ALS4000 is not set
# CONFIG_SND_CMIPCI is not set
# CONFIG_SND_ENS1370 is not set
# CONFIG_SND_ENS1371 is not set
# CONFIG_SND_ES1938 is not set
# CONFIG_SND_ES1968 is not set
# CONFIG_SND_MAESTRO3 is not set
# CONFIG_SND_FM801 is not set
# CONFIG_SND_ICE1712 is not set
# CONFIG_SND_ICE1724 is not set
CONFIG_SND_INTEL8X0=m
CONFIG_SND_INTEL8X0M=m
# CONFIG_SND_SONICVIBES is not set
# CONFIG_SND_VIA82XX is not set
# CONFIG_SND_VIA82XX_MODEM is not set
# CONFIG_SND_VX222 is not set
# CONFIG_SND_HDA_INTEL is not set

#
# USB devices
#
# CONFIG_SND_USB_AUDIO is not set
# CONFIG_SND_USB_USX2Y is not set

#
# PCMCIA devices
#

#
# Open Sound System
#
# CONFIG_SOUND_PRIME is not set

#
# USB support
#
CONFIG_USB_ARCH_HAS_HCD=y
CONFIG_USB_ARCH_HAS_OHCI=y
CONFIG_USB=y
# CONFIG_USB_DEBUG is not set

#
# Miscellaneous USB options
#
CONFIG_USB_DEVICEFS=y
# CONFIG_USB_BANDWIDTH is not set
# CONFIG_USB_DYNAMIC_MINORS is not set
# CONFIG_USB_SUSPEND is not set
# CONFIG_USB_OTG is not set

#
# USB Host Controller Drivers
#
CONFIG_USB_EHCI_HCD=m
# CONFIG_USB_EHCI_SPLIT_ISO is not set
CONFIG_USB_EHCI_ROOT_HUB_TT=y
# CONFIG_USB_ISP116X_HCD is not set
CONFIG_USB_OHCI_HCD=m
# CONFIG_USB_OHCI_BIG_ENDIAN is not set
CONFIG_USB_OHCI_LITTLE_ENDIAN=y
# CONFIG_USB_UHCI_HCD is not set
# CONFIG_USB_SL811_HCD is not set

#
# USB Device Class drivers
#
# CONFIG_USB_AUDIO is not set
# CONFIG_USB_BLUETOOTH_TTY is not set
# CONFIG_USB_MIDI is not set
# CONFIG_USB_ACM is not set
CONFIG_USB_PRINTER=m

#
# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' may also be needed; see USB_STORAGE Help for more information #
CONFIG_USB_STORAGE=m
# CONFIG_USB_STORAGE_DEBUG is not set
# CONFIG_USB_STORAGE_DATAFAB is not set
# CONFIG_USB_STORAGE_FREECOM is not set
# CONFIG_USB_STORAGE_ISD200 is not set
# CONFIG_USB_STORAGE_DPCM is not set
CONFIG_USB_STORAGE_USBAT=y
# CONFIG_USB_STORAGE_SDDR09 is not set
# CONFIG_USB_STORAGE_SDDR55 is not set
# CONFIG_USB_STORAGE_JUMPSHOT is not set

#
# USB Input Devices
#
CONFIG_USB_HID=m
CONFIG_USB_HIDINPUT=y
# CONFIG_HID_FF is not set
CONFIG_USB_HIDDEV=y

#
# USB HID Boot Protocol drivers
#
# CONFIG_USB_KBD is not set
# CONFIG_USB_MOUSE is not set
# CONFIG_USB_AIPTEK is not set
# CONFIG_USB_WACOM is not set
# CONFIG_USB_KBTAB is not set
# CONFIG_USB_POWERMATE is not set
# CONFIG_USB_MTOUCH is not set
# CONFIG_USB_ITMTOUCH is not set
# CONFIG_USB_EGALAX is not set
# CONFIG_USB_XPAD is not set
# CONFIG_USB_ATI_REMOTE is not set

#
# USB Imaging devices
#
# CONFIG_USB_MDC800 is not set
# CONFIG_USB_MICROTEK is not set

#
# USB Multimedia devices
#
# CONFIG_USB_DABUSB is not set

#
# Video4Linux support is needed for USB Multimedia device support #

#
# USB Network Adapters
#
# CONFIG_USB_CATC is not set
# CONFIG_USB_KAWETH is not set
# CONFIG_USB_PEGASUS is not set
# CONFIG_USB_RTL8150 is not set
# CONFIG_USB_USBNET is not set
# CONFIG_USB_MON is not set

#
# USB port drivers
#
# CONFIG_USB_USS720 is not set

#
# USB Serial Converter support
#
# CONFIG_USB_SERIAL is not set

#
# USB Miscellaneous drivers
#
# CONFIG_USB_EMI62 is not set
# CONFIG_USB_EMI26 is not set
# CONFIG_USB_AUERSWALD is not set
# CONFIG_USB_RIO500 is not set
# CONFIG_USB_LEGOTOWER is not set
# CONFIG_USB_LCD is not set
# CONFIG_USB_LED is not set
# CONFIG_USB_CYTHERM is not set
# CONFIG_USB_PHIDGETKIT is not set
# CONFIG_USB_PHIDGETSERVO is not set
# CONFIG_USB_IDMOUSE is not set
# CONFIG_USB_SISUSBVGA is not set
# CONFIG_USB_TEST is not set

#
# USB DSL modem support
#

#
# USB Gadget Support
#
# CONFIG_USB_GADGET is not set

#
# MMC/SD Card support
#
# CONFIG_MMC is not set

#
# InfiniBand support
#
# CONFIG_INFINIBAND is not set

#
# SN Devices
#

#
# Distributed Lock Manager
#
# CONFIG_DLM is not set

#
# File systems
#
CONFIG_EXT2_FS=y
# CONFIG_EXT2_FS_XATTR is not set
# CONFIG_EXT2_FS_XIP is not set
CONFIG_EXT3_FS=y
# CONFIG_EXT3_FS_XATTR is not set
CONFIG_JBD=y
# CONFIG_JBD_DEBUG is not set
# CONFIG_REISER4_FS is not set
# CONFIG_REISERFS_FS is not set
# CONFIG_JFS_FS is not set

#
# XFS support
#
# CONFIG_XFS_FS is not set
# CONFIG_OCFS2_FS is not set
# CONFIG_MINIX_FS is not set
# CONFIG_ROMFS_FS is not set
CONFIG_INOTIFY=y
# CONFIG_QUOTA is not set
CONFIG_DNOTIFY=y
# CONFIG_AUTOFS_FS is not set
# CONFIG_AUTOFS4_FS is not set

#
# Caches
#
# CONFIG_FSCACHE is not set
# CONFIG_FUSE_FS is not set

#
# CD-ROM/DVD Filesystems
#
CONFIG_ISO9660_FS=m
CONFIG_JOLIET=y
CONFIG_ZISOFS=y
CONFIG_ZISOFS_FS=m
CONFIG_UDF_FS=m
CONFIG_UDF_NLS=y

#
# DOS/FAT/NT Filesystems
#
CONFIG_FAT_FS=m
CONFIG_MSDOS_FS=m
CONFIG_VFAT_FS=m
CONFIG_FAT_DEFAULT_CODEPAGE=437
CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
CONFIG_NTFS_FS=m
# CONFIG_NTFS_DEBUG is not set
CONFIG_NTFS_RW=y

#
# Pseudo filesystems
#
CONFIG_PROC_FS=y
CONFIG_PROC_KCORE=y
CONFIG_SYSFS=y
# CONFIG_DEVFS_FS is not set
# CONFIG_DEVPTS_FS_XATTR is not set
# CONFIG_TMPFS is not set
# CONFIG_HUGETLBFS is not set
# CONFIG_HUGETLB_PAGE is not set
CONFIG_RAMFS=y
# CONFIG_CONFIGFS_FS is not set
# CONFIG_RELAYFS_FS is not set

#
# Miscellaneous filesystems
#
# CONFIG_ADFS_FS is not set
# CONFIG_AFFS_FS is not set
# CONFIG_HFS_FS is not set
# CONFIG_HFSPLUS_FS is not set
# CONFIG_BEFS_FS is not set
# CONFIG_BFS_FS is not set
# CONFIG_EFS_FS is not set
# CONFIG_CRAMFS is not set
# CONFIG_VXFS_FS is not set
# CONFIG_HPFS_FS is not set
# CONFIG_QNX4FS_FS is not set
# CONFIG_SYSV_FS is not set
# CONFIG_UFS_FS is not set

#
# Network File Systems
#
# CONFIG_NFS_FS is not set
# CONFIG_NFSD is not set
# CONFIG_SMB_FS is not set
# CONFIG_CIFS is not set
# CONFIG_NCP_FS is not set
# CONFIG_CODA_FS is not set
# CONFIG_AFS_FS is not set

#
# Partition Types
#
# CONFIG_PARTITION_ADVANCED is not set
CONFIG_MSDOS_PARTITION=y

#
# Native Language Support
#
CONFIG_NLS=y
CONFIG_NLS_DEFAULT="iso8859-1"
CONFIG_NLS_CODEPAGE_437=m
# CONFIG_NLS_CODEPAGE_737 is not set
# CONFIG_NLS_CODEPAGE_775 is not set
# CONFIG_NLS_CODEPAGE_850 is not set
# CONFIG_NLS_CODEPAGE_852 is not set
# CONFIG_NLS_CODEPAGE_855 is not set
# CONFIG_NLS_CODEPAGE_857 is not set
# CONFIG_NLS_CODEPAGE_860 is not set
# CONFIG_NLS_CODEPAGE_861 is not set
# CONFIG_NLS_CODEPAGE_862 is not set
# CONFIG_NLS_CODEPAGE_863 is not set
# CONFIG_NLS_CODEPAGE_864 is not set
# CONFIG_NLS_CODEPAGE_865 is not set
# CONFIG_NLS_CODEPAGE_866 is not set
# CONFIG_NLS_CODEPAGE_869 is not set
# CONFIG_NLS_CODEPAGE_936 is not set
# CONFIG_NLS_CODEPAGE_950 is not set
# CONFIG_NLS_CODEPAGE_932 is not set
# CONFIG_NLS_CODEPAGE_949 is not set
# CONFIG_NLS_CODEPAGE_874 is not set
# CONFIG_NLS_ISO8859_8 is not set
# CONFIG_NLS_CODEPAGE_1250 is not set
# CONFIG_NLS_CODEPAGE_1251 is not set
# CONFIG_NLS_ASCII is not set
CONFIG_NLS_ISO8859_1=m
# CONFIG_NLS_ISO8859_2 is not set
# CONFIG_NLS_ISO8859_3 is not set
# CONFIG_NLS_ISO8859_4 is not set
# CONFIG_NLS_ISO8859_5 is not set
# CONFIG_NLS_ISO8859_6 is not set
# CONFIG_NLS_ISO8859_7 is not set
# CONFIG_NLS_ISO8859_9 is not set
# CONFIG_NLS_ISO8859_13 is not set
# CONFIG_NLS_ISO8859_14 is not set
CONFIG_NLS_ISO8859_15=m
# CONFIG_NLS_KOI8_R is not set
# CONFIG_NLS_KOI8_U is not set
# CONFIG_NLS_UTF8 is not set

#
# Profiling support
#
# CONFIG_PROFILING is not set

#
# Kernel hacking
#
# CONFIG_PRINTK_TIME is not set
CONFIG_DEBUG_KERNEL=y
CONFIG_MAGIC_SYSRQ=y
CONFIG_LOG_BUF_SHIFT=15
CONFIG_DETECT_SOFTLOCKUP=y
# CONFIG_SCHEDSTATS is not set
# CONFIG_DEBUG_SLAB is not set
# CONFIG_DEBUG_PREEMPT is not set
# CONFIG_DEBUG_SPINLOCK is not set
# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
# CONFIG_DEBUG_KOBJECT is not set
CONFIG_DEBUG_BUGVERBOSE=y
# CONFIG_DEBUG_INFO is not set
# CONFIG_PAGE_OWNER is not set
# CONFIG_DEBUG_FS is not set
# CONFIG_FRAME_POINTER is not set
CONFIG_EARLY_PRINTK=y
# CONFIG_DEBUG_STACKOVERFLOW is not set
# CONFIG_KPROBES is not set
# CONFIG_DEBUG_STACK_USAGE is not set
# CONFIG_DEBUG_PAGEALLOC is not set
# CONFIG_4KSTACKS is not set
# CONFIG_KGDB is not set

#
# Security options
#
# CONFIG_KEYS is not set
# CONFIG_SECURITY is not set

#
# Cryptographic options
#
# CONFIG_CRYPTO is not set

#
# Hardware crypto devices
#

#
# Library routines
#
# CONFIG_CRC_CCITT is not set
CONFIG_CRC32=y
# CONFIG_LIBCRC32C is not set
CONFIG_ZLIB_INFLATE=m
CONFIG_GENERIC_HARDIRQS=y
CONFIG_GENERIC_IRQ_PROBE=y
CONFIG_X86_BIOS_REBOOT=y
CONFIG_PC=y

0000:00:00.0 Host bridge: Silicon Integrated Systems [SiS] SiS 645xx (rev 03)
Subsystem: Asustek Computer, Inc.: Unknown device 1738
Flags: bus master, medium devsel, latency 32
Memory at e8000000 (32-bit, non-prefetchable) [size=64M]
Capabilities: [c0] AGP version 2.0

0000:00:01.0 PCI bridge: Silicon Integrated Systems [SiS] Virtual PCI-to-PCI bridge (AGP) (prog-if 00 [Normal decode])

	Flags: bus master, fast devsel, latency 0
	Bus: primary=00, secondary=01, subordinate=01, sec-latency=0
	I/O behind bridge: 0000d000-0000dfff
	Memory behind bridge: e7800000-e7ffffff
	Prefetchable memory behind bridge: eff00000-febfffff

0000:00:02.0 ISA bridge: Silicon Integrated Systems [SiS] SiS963 [MuTIOL Media IO] (rev 14)
Flags: bus master, medium devsel, latency 0

0000:00:02.1 SMBus: Silicon Integrated Systems [SiS]: Unknown device 0016

	Flags: medium devsel
	I/O ports at e800 [size=32]

0000:00:02.3 FireWire (IEEE 1394): Silicon Integrated Systems [SiS] FireWire Controller (prog-if 10 [OHCI])
Subsystem: Asustek Computer, Inc.: Unknown device 1737
Flags: bus master, medium devsel, latency 32, IRQ 11
Memory at e7000000 (32-bit, non-prefetchable) [size=4K]
Capabilities: [64] Power Management version 2

0000:00:02.5 IDE interface: Silicon Integrated Systems [SiS] 5513 [IDE] (prog-if 80 [Master])
Subsystem: Asustek Computer, Inc.: Unknown device 1738
Flags: bus master, medium devsel, latency 32
I/O ports at b800 [size=16]
Capabilities: [58] Power Management version 2

0000:00:02.6 Modem: Silicon Integrated Systems [SiS] AC'97 Modem Controller (rev a0) (prog-if 00 [Generic])
Subsystem: Asustek Computer, Inc.: Unknown device 1736
Flags: bus master, medium devsel, latency 32, IRQ 11
I/O ports at b400 [size=256]
I/O ports at b000 [size=128]
Capabilities: [48] Power Management version 2

0000:00:02.7 Multimedia audio controller: Silicon Integrated Systems [SiS] Sound Controller (rev a0)
Subsystem: Asustek Computer, Inc.: Unknown device 1733
Flags: bus master, medium devsel, latency 32, IRQ 11
I/O ports at a800 [size=256]
I/O ports at a400 [size=128]
Capabilities: [48] Power Management version 2

0000:00:03.0 USB Controller: Silicon Integrated Systems [SiS] USB 1.0 Controller (rev 0f) (prog-if 10 [OHCI])
Subsystem: Asustek Computer, Inc.: Unknown device 1739
Flags: bus master, medium devsel, latency 32, IRQ 5
Memory at e6800000 (32-bit, non-prefetchable) [size=4K]
Capabilities: [dc] Power Management version 2

0000:00:03.1 USB Controller: Silicon Integrated Systems [SiS] USB 1.0 Controller (rev 0f) (prog-if 10 [OHCI])
Subsystem: Asustek Computer, Inc.: Unknown device 1739
Flags: bus master, medium devsel, latency 32, IRQ 5
Memory at e6000000 (32-bit, non-prefetchable) [size=4K]
Capabilities: [dc] Power Management version 2

0000:00:03.2 USB Controller: Silicon Integrated Systems [SiS] USB 1.0 Controller (rev 0f) (prog-if 10 [OHCI])
Subsystem: Asustek Computer, Inc.: Unknown device 1739
Flags: bus master, medium devsel, latency 32, IRQ 5
Memory at e5800000 (32-bit, non-prefetchable) [size=4K]
Capabilities: [dc] Power Management version 2

0000:00:03.3 USB Controller: Silicon Integrated Systems [SiS] USB 2.0 Controller (prog-if 20 [EHCI])
Subsystem: Asustek Computer, Inc.: Unknown device 173a
Flags: bus master, medium devsel, latency 32, IRQ 5
Memory at e5000000 (32-bit, non-prefetchable) [size=4K]
Capabilities: [50] Power Management version 2

0000:00:0a.0 CardBus bridge: ENE Technology Inc CB720 Cardbus Controller (rev 01)

	Subsystem: Asustek Computer, Inc.: Unknown device 1734
	Flags: bus master, medium devsel, latency 168, IRQ 11
	Memory at 20000000 (32-bit, non-prefetchable) [size=4K]
	Bus: primary=00, secondary=02, subordinate=05, sec-latency=176
	Memory window 0: 20400000-207ff000 (prefetchable)
	Memory window 1: 20800000-20bff000
	I/O window 0: 00002000-000020ff
	I/O window 1: 00002400-000024ff
	16-bit legacy interface ports at 0001

0000:00:0a.1 CardBus bridge: ENE Technology Inc CB720 Cardbus Controller (rev 01)

	Subsystem: Asustek Computer, Inc.: Unknown device 1734
	Flags: bus master, medium devsel, latency 168, IRQ 11
	Memory at 20001000 (32-bit, non-prefetchable) [size=4K]
	Bus: primary=00, secondary=06, subordinate=09, sec-latency=176
	Memory window 0: 20c00000-20fff000 (prefetchable)
	Memory window 1: 21000000-213ff000
	I/O window 0: 00002800-000028ff
	I/O window 1: 00002c00-00002cff
	16-bit legacy interface ports at 0001

0000:00:0a.2 FLASH memory: ENE Technology Inc CB710 Memory Card Reader Controller
Subsystem: Asustek Computer, Inc.: Unknown device 173b
Flags: medium devsel, IRQ 11
I/O ports at 9800 [size=128]
Capabilities: [a0] Power Management version 2

0000:00:0d.0 Ethernet controller: 3Com Corporation 3c940 10/100/1000Base-T [Marvell] (rev 12)
Subsystem: Asustek Computer, Inc.: Unknown device 173c
Flags: bus master, 66MHz, medium devsel, latency 32, IRQ 11
Memory at e4000000 (32-bit, non-prefetchable) [size=16K]
I/O ports at 9400 [size=256]
Capabilities: [48] Power Management version 2
Capabilities: [50] Vital Product Data

0000:01:00.0 VGA compatible controller: ATI Technologies Inc Radeon R250 Lf [Radeon Mobility 9000 M9] (rev 01) (prog-if 00 [VGA])
Subsystem: Asustek Computer, Inc.: Unknown device 1732
Flags: bus master, stepping, 66MHz, medium devsel, latency 64, IRQ 11
Memory at f0000000 (32-bit, prefetchable) [size=128M]
I/O ports at d800 [size=256]
Memory at e7800000 (32-bit, non-prefetchable) [size=64K]
Expansion ROM at effe0000 [disabled] [size=128K]
Capabilities: [58] AGP version 2.0
Capabilities: [50] Power Management version 2

#3 lore raw
Quoted 6 lines

This made my asus-acpi work again.

DRM/DRI seems to have stopped working since -rc5-mm1.
-mm1 reported a badness in syslog (see my previous report int rc5-mm1 announcement thread), while now something is silently failing: glxinfo reports

Can you look in dmesg for where it loads the drm and radeon drivers? and agp? attach a dmesg from Linus tree and from -mm if you could..

Dave.

#4 lore raw
In reply to Andrew Morton

Hi!

Quoted 6 lines

ftp://ftp.kernel.org/pub/linux/kernel/people/akpm/patches/2.6/2.6.12-rc5/2.6.12-rc5-mm2/

- Dropped bk-acpi.patch. Too old, too much breakage.

- A few more subsystem trees have moved to using git

Have you considered publishing -mm using git?

I guess your workflow prevents you from really using git, but even just publishing releases using git would be great.

(Just now I'm tracking Linus with my tree. git makes that quite easy. Tracking -mm is ugly manual work with diff, patch and ketchup...)
Pavel

Signature · 1 line
64 bytes from 195.113.31.123: icmp_seq=28 ttl=51 time=448769.1 ms
#5 lore raw
Quoted 9 lines · Pavel Machek

Hi!

Quoted 6 lines

ftp://ftp.kernel.org/pub/linux/kernel/people/akpm/patches/2.6/2.6.12-rc5/2.6.12-rc5-mm2/

- Dropped bk-acpi.patch. Too old, too much breakage.

- A few more subsystem trees have moved to using git

Quoted 7 lines

Have you considered publishing -mm using git?

I guess your workflow prevents you from really using git, but even just publishing releases using git would be great.

(Just now I'm tracking Linus with my tree. git makes that quite easy. Tracking -mm is ugly manual work with diff, patch and ketchup...)

I have written a script (actually a leftover from the mm-to-BK import days) that pulls -mm into git as individual commits.

Andrew: Could you prefix the patches you pull from git with this line:

GIT SHA1-of-their-top-commit URL-of-their-archive

so that I can annotate the commits with an appropriate second parent?

If you never do any changes oon top of -mm, but only merge with it (or them), then this works out quite well.

Signature · 6 lines
Matthias Urlichs   |   {M:U} IT Design @ m-u-it.de   |  [email protected]
Disclaimer: The quote was selected randomly. Really. | http://smurf.noris.de
 - -
Andrea: Unhappy the land that has no heroes.
Galileo: No, unhappy the land that _____needs heroes.
		-- Bertolt Brecht, "Life of Galileo"
#6 lore raw

Hi!

Quoted 9 lines
Quoted 9 lines
Quoted 6 lines

ftp://ftp.kernel.org/pub/linux/kernel/people/akpm/patches/2.6/2.6.12-rc5/2.6.12-rc5-mm2/

- Dropped bk-acpi.patch. Too old, too much breakage.

- A few more subsystem trees have moved to using git

Have you considered publishing -mm using git?

Quoted 8 lines
Quoted 5 lines

I guess your workflow prevents you from really using git, but even just publishing releases using git would be great.

(Just now I'm tracking Linus with my tree. git makes that quite easy. Tracking -mm is ugly manual work with diff, patch and ketchup...)

I have written a script (actually a leftover from the mm-to-BK import days) that pulls -mm into git as individual commits.

Great! Would it be possible to export results of your script somewhere? I guess you could get kernel.org account for this...
Pavel

#7 lore raw

Hi,

Pavel Machek:

Quoted 5 lines
Quoted 2 lines

I have written a script (actually a leftover from the mm-to-BK import days) that pulls -mm into git as individual commits.

Great! Would it be possible to export results of your script somewhere? I guess you could get kernel.org account for this...

Sure, can do. Gimme. ;-)

Signature · 8 lines
Matthias Urlichs   |   {M:U} IT Design @ m-u-it.de   |  [email protected]
Disclaimer: The quote was selected randomly. Really. | http://smurf.noris.de
 - -
You see, what is yielding and weak
Overcomes what is hard and strong:
(And just as a fish can't be seen
when he stays down in the deep
don't show your power to anyone.
#8 lore raw
In reply to Andrew Morton
Quoted 5 lines · Andrew Morton

ftp://ftp.kernel.org/pub/linux/kernel/people/akpm/patches/2.6/2.6.12-rc5/2.6.12-rc5-mm2/
- Dropped bk-acpi.patch. Too old, too much breakage.
- A few more subsystem trees have moved to using git
- There are a large number of patches here which fix patches which people have already sent. A very large number. Are we getting a bit careless?

This small patch silences some iomem-related warnings in sunzilog.c by declaring mapped_addr as void __iomem * and inserting a cast in one case.

drivers/serial/sunzilog.c +4 -4
Index: mm2-2.6.12-rc5/drivers/serial/sunzilog.c
===================================================================
@@ -1071,7 +1071,7 @@
  */
 static struct zilog_layout __iomem * __init get_zs_sun4u(int chip, int zsnode)
 {
-	unsigned long mapped_addr;
+	void __iomem *mapped_addr;
 	unsigned int sun4u_ino;
 	struct sbus_bus *sbus = NULL;
 	struct sbus_dev *sdev = NULL;

@@ -1111,9 +1111,9 @@
 		apply_fhc_ranges(central_bus->child,
 				 &zsregs[0], 1);
 		apply_central_ranges(central_bus, &zsregs[0], 1);
-		mapped_addr =
-			(((u64)zsregs[0].which_io)<<32UL) |
-			((u64)zsregs[0].phys_addr);
+		mapped_addr = (void __iomem *)
+			((((u64)zsregs[0].which_io)<<32UL) |
+			((u64)zsregs[0].phys_addr));
 	}
 
 	if (zilog_irq == -1) {
#9 lore raw
In reply to Andrew Morton
Quoted 9 lines · Andrew Morton

ftp://ftp.kernel.org/pub/linux/kernel/people/akpm/patches/2.6/2.6.12-rc5/2.6.12-rc5-mm2/

- Dropped bk-acpi.patch. Too old, too much breakage.

- A few more subsystem trees have moved to using git

- There are a large number of patches here which fix patches which people have already sent. A very large number. Are we getting a bit careless?

-rc5-mm2 breaks for me with the attached config. The attached patch fixes it for me. It's because I have CONFIG_MODULES but not CONFIG_MODULE_UNLOAD.

kernel/module.c: In function `module_add_modinfo_attrs':
kernel/module.c:1078: error: `modinfo_attrs' undeclared (first use in this function)
kernel/module.c:1078: error: (Each undeclared identifier is reported only once kernel/module.c:1078: error: for each function it appears in.) kernel/module.c: In function `module_remove_modinfo_attrs':
kernel/module.c:1091: error: `modinfo_attrs' undeclared (first use in this function)
kernel/module.c: In function `setup_modinfo':
kernel/module.c:1387: error: `modinfo_attrs' undeclared (first use in this function)

  CC      kernel/kallsyms.o
  CC      kernel/irq/handle.o
  CC      kernel/irq/manage.o

make[1]: *** [kernel/module.o] Error 1
make[1]: *** Waiting for unfinished jobs....

-Matt

kernel/module.c.fixed renamed from kernel/module.c +37 -37
@@ -370,6 +370,43 @@ static inline void percpu_modcopy(void *
 }
 #endif /* CONFIG_SMP */
 
+#define MODINFO_ATTR(field)	\
+static void setup_modinfo_##field(struct module *mod, const char *s)  \
+{                                                                     \
+	mod->field = kstrdup(s, GFP_KERNEL);                          \
+}                                                                     \
+static ssize_t show_modinfo_##field(struct module_attribute *mattr,   \
+	                struct module *mod, char *buffer)             \
+{                                                                     \
+	return sprintf(buffer, "%s\n", mod->field);                   \
+}                                                                     \
+static int modinfo_##field##_exists(struct module *mod)               \
+{                                                                     \
+	return mod->field != NULL;                                    \
+}                                                                     \
+static void free_modinfo_##field(struct module *mod)                  \
+{                                                                     \
+        kfree(mod->field);                                            \
+        mod->field = NULL;                                            \
+}                                                                     \
+static struct module_attribute modinfo_##field = {                    \
+	.attr = { .name = __stringify(field), .mode = 0444,           \
+		  .owner = THIS_MODULE },                             \
+	.show = show_modinfo_##field,                                 \
+	.setup = setup_modinfo_##field,                               \
+	.test = modinfo_##field##_exists,                             \
+	.free = free_modinfo_##field,                                 \
+};
+
+MODINFO_ATTR(version);
+MODINFO_ATTR(srcversion);
+
+static struct module_attribute *modinfo_attrs[] = {
+	&modinfo_version,
+	&modinfo_srcversion,
+	NULL,
+};
+
 #ifdef CONFIG_MODULE_UNLOAD
 /* Init the unload section of the module. */
 static void module_unload_init(struct module *mod)

@@ -664,43 +701,6 @@ static struct module_attribute refcnt = 
 	.show = show_refcnt,
 };
 
-#define MODINFO_ATTR(field)	\
-static void setup_modinfo_##field(struct module *mod, const char *s)  \
-{                                                                     \
-	mod->field = kstrdup(s, GFP_KERNEL);                          \
-}                                                                     \
-static ssize_t show_modinfo_##field(struct module_attribute *mattr,   \
-	                struct module *mod, char *buffer)             \
-{                                                                     \
-	return sprintf(buffer, "%s\n", mod->field);                   \
-}                                                                     \
-static int modinfo_##field##_exists(struct module *mod)               \
-{                                                                     \
-	return mod->field != NULL;                                    \
-}                                                                     \
-static void free_modinfo_##field(struct module *mod)                  \
-{                                                                     \
-        kfree(mod->field);                                            \
-        mod->field = NULL;                                            \
-}                                                                     \
-static struct module_attribute modinfo_##field = {                    \
-	.attr = { .name = __stringify(field), .mode = 0444,           \
-		  .owner = THIS_MODULE },                             \
-	.show = show_modinfo_##field,                                 \
-	.setup = setup_modinfo_##field,                               \
-	.test = modinfo_##field##_exists,                             \
-	.free = free_modinfo_##field,                                 \
-};
-
-MODINFO_ATTR(version);
-MODINFO_ATTR(srcversion);
-
-static struct module_attribute *modinfo_attrs[] = {
-	&modinfo_version,
-	&modinfo_srcversion,
-	NULL,
-};
-
 #else /* !CONFIG_MODULE_UNLOAD */
 static void print_unload_info(struct seq_file *m, struct module *mod)
 {

#
# Automatically generated make config: don't edit
# Linux kernel version: 2.6.12-rc5-mm2-autokern1
# Wed Jun 1 23:04:10 2005
#
CONFIG_X86=y
CONFIG_MMU=y
CONFIG_UID16=y
CONFIG_GENERIC_ISA_DMA=y
CONFIG_GENERIC_IOMAP=y

#
# Code maturity level options
#
CONFIG_EXPERIMENTAL=y
# CONFIG_CLEAN_COMPILE is not set
CONFIG_BROKEN=y
CONFIG_BROKEN_ON_SMP=y
CONFIG_LOCK_KERNEL=y
CONFIG_INIT_ENV_ARG_LIMIT=32

#
# General setup
#
CONFIG_LOCALVERSION=""
CONFIG_SWAP=y
CONFIG_SYSVIPC=y
# CONFIG_POSIX_MQUEUE is not set
# CONFIG_BSD_PROCESS_ACCT is not set
CONFIG_SYSCTL=y
# CONFIG_AUDIT is not set
# CONFIG_HOTPLUG is not set
CONFIG_KOBJECT_UEVENT=y
CONFIG_IKCONFIG=y
CONFIG_IKCONFIG_PROC=y
# CONFIG_CPUSETS is not set
# CONFIG_EMBEDDED is not set
CONFIG_KALLSYMS=y
# CONFIG_KALLSYMS_ALL is not set
# CONFIG_KALLSYMS_EXTRA_PASS is not set
CONFIG_PRINTK=y
CONFIG_BUG=y
CONFIG_BASE_FULL=y
CONFIG_FUTEX=y
CONFIG_EPOLL=y
CONFIG_SHMEM=y
CONFIG_CC_ALIGN_FUNCTIONS=0
CONFIG_CC_ALIGN_LABELS=0
CONFIG_CC_ALIGN_LOOPS=0
CONFIG_CC_ALIGN_JUMPS=0
# CONFIG_TINY_SHMEM is not set
CONFIG_BASE_SMALL=0

#
# Loadable module support
#
CONFIG_MODULES=y
# CONFIG_MODULE_UNLOAD is not set
CONFIG_OBSOLETE_MODPARM=y
# CONFIG_MODVERSIONS is not set
# CONFIG_MODULE_SRCVERSION_ALL is not set
CONFIG_KMOD=y

#
# Processor type and features
#
# CONFIG_X86_PC is not set
# CONFIG_X86_ELAN is not set
# CONFIG_X86_VOYAGER is not set
CONFIG_X86_NUMAQ=y
# CONFIG_X86_SUMMIT is not set
# CONFIG_X86_BIGSMP is not set
# CONFIG_X86_VISWS is not set
# CONFIG_X86_GENERICARCH is not set
# CONFIG_X86_ES7000 is not set
# CONFIG_M386 is not set
# CONFIG_M486 is not set
# CONFIG_M586 is not set
# CONFIG_M586TSC is not set
# CONFIG_M586MMX is not set
# CONFIG_M686 is not set
# CONFIG_MPENTIUMII is not set
CONFIG_MPENTIUMIII=y
# CONFIG_MPENTIUMM is not set
# CONFIG_MPENTIUM4 is not set
# CONFIG_MK6 is not set
# CONFIG_MK7 is not set
# CONFIG_MK8 is not set
# CONFIG_MCRUSOE is not set
# CONFIG_MEFFICEON is not set
# CONFIG_MWINCHIPC6 is not set
# CONFIG_MWINCHIP2 is not set
# CONFIG_MWINCHIP3D is not set
# CONFIG_MGEODEGX1 is not set
# CONFIG_MCYRIXIII is not set
# CONFIG_MVIAC3_2 is not set
# CONFIG_X86_GENERIC is not set
CONFIG_X86_CMPXCHG=y
CONFIG_X86_XADD=y
CONFIG_X86_L1_CACHE_SHIFT=5
CONFIG_RWSEM_XCHGADD_ALGORITHM=y
CONFIG_GENERIC_CALIBRATE_DELAY=y
CONFIG_X86_WP_WORKS_OK=y
CONFIG_X86_INVLPG=y
CONFIG_X86_BSWAP=y
CONFIG_X86_POPAD_OK=y
CONFIG_X86_GOOD_APIC=y
CONFIG_X86_INTEL_USERCOPY=y
CONFIG_X86_USE_PPRO_CHECKSUM=y
# CONFIG_HPET_TIMER is not set
CONFIG_SMP=y
CONFIG_NR_CPUS=32
# CONFIG_SCHED_SMT is not set
CONFIG_PREEMPT_NONE=y
# CONFIG_PREEMPT_VOLUNTARY is not set
# CONFIG_PREEMPT is not set
CONFIG_PREEMPT_BKL=y
CONFIG_X86_LOCAL_APIC=y
CONFIG_X86_IO_APIC=y
# CONFIG_X86_MCE is not set
# CONFIG_TOSHIBA is not set
# CONFIG_I8K is not set
# CONFIG_X86_REBOOTFIXUPS is not set
# CONFIG_MICROCODE is not set
CONFIG_X86_MSR=y
CONFIG_X86_CPUID=y

#
# Firmware Drivers
#
# CONFIG_EDD is not set
# CONFIG_NOHIGHMEM is not set
# CONFIG_HIGHMEM4G is not set
CONFIG_HIGHMEM64G=y
CONFIG_HIGHMEM=y
CONFIG_X86_PAE=y
CONFIG_NUMA=y
CONFIG_HAVE_ARCH_BOOTMEM_NODE=y
CONFIG_ARCH_HAVE_MEMORY_PRESENT=y
CONFIG_NEED_NODE_MEMMAP_SIZE=y
CONFIG_HAVE_ARCH_ALLOC_REMAP=y
CONFIG_ARCH_DISCONTIGMEM_ENABLE=y
CONFIG_ARCH_DISCONTIGMEM_DEFAULT=y
CONFIG_ARCH_SPARSEMEM_ENABLE=y
CONFIG_ARCH_SELECT_MEMORY_MODEL=y
CONFIG_SELECT_MEMORY_MODEL=y
# CONFIG_FLATMEM_MANUAL is not set
CONFIG_DISCONTIGMEM_MANUAL=y
# CONFIG_SPARSEMEM_MANUAL is not set
CONFIG_DISCONTIGMEM=y
CONFIG_FLAT_NODE_MEM_MAP=y
CONFIG_NEED_MULTIPLE_NODES=y
CONFIG_HAVE_MEMORY_PRESENT=y
CONFIG_HAVE_ARCH_EARLY_PFN_TO_NID=y
CONFIG_PAGE_REPLICATION=y
# CONFIG_HIGHPTE is not set
# CONFIG_MATH_EMULATION is not set
CONFIG_MTRR=y
CONFIG_IRQBALANCE=y
CONFIG_HAVE_DEC_LOCK=y
# CONFIG_REGPARM is not set
CONFIG_SECCOMP=y
# CONFIG_HZ_100 is not set
CONFIG_HZ_250=y
# CONFIG_HZ_1000 is not set
CONFIG_HZ=250

#
# Performance-monitoring counters support
#
# CONFIG_PERFCTR is not set
CONFIG_PHYSICAL_START=0x100000
# CONFIG_KEXEC is not set

#
# Power management options (ACPI, APM)
#
CONFIG_PM=y
# CONFIG_PM_DEBUG is not set
# CONFIG_SOFTWARE_SUSPEND is not set

#
# ACPI (Advanced Configuration and Power Interface) Support #
# CONFIG_ACPI is not set

#
# APM (Advanced Power Management) BIOS Support
#
# CONFIG_APM is not set

#
# CPU Frequency scaling
#
# CONFIG_CPU_FREQ is not set

#
# Bus options (PCI, PCMCIA, EISA, MCA, ISA)
#
CONFIG_PCI=y
# CONFIG_PCI_GOBIOS is not set
# CONFIG_PCI_GOMMCONFIG is not set
# CONFIG_PCI_GODIRECT is not set
CONFIG_PCI_GOANY=y
CONFIG_PCI_BIOS=y
CONFIG_PCI_DIRECT=y
# CONFIG_PCIEPORTBUS is not set
# CONFIG_PCI_MSI is not set
CONFIG_PCI_LEGACY_PROC=y
CONFIG_PCI_NAMES=y
# CONFIG_PCI_DEBUG is not set
CONFIG_ISA_DMA_API=y
CONFIG_ISA=y
# CONFIG_EISA is not set
# CONFIG_MCA is not set
# CONFIG_SCx200 is not set

#
# PCCARD (PCMCIA/CardBus) support
#
# CONFIG_PCCARD is not set

#
# PCI Hotplug Support
#
# CONFIG_HOTPLUG_PCI is not set

#
# Executable file formats
#
CONFIG_BINFMT_ELF=y
CONFIG_BINFMT_AOUT=y
CONFIG_BINFMT_MISC=y

#
# Device Drivers
#

#
# Generic Driver Options
#
CONFIG_STANDALONE=y
CONFIG_PREVENT_FIRMWARE_BUILD=y
# CONFIG_FW_LOADER is not set
# CONFIG_DEBUG_DRIVER is not set

#
# Connector - unified userspace <-> kernelspace linker #
CONFIG_CONNECTOR=y
CONFIG_FORK_CONNECTOR=y

#
# Memory Technology Devices (MTD)
#
# CONFIG_MTD is not set

#
# Parallel port support
#
# CONFIG_PARPORT is not set

#
# Plug and Play support
#
# CONFIG_PNP is not set

#
# Block devices
#
# CONFIG_BLK_DEV_FD is not set
# CONFIG_BLK_DEV_XD is not set
# CONFIG_BLK_CPQ_DA is not set
# CONFIG_BLK_CPQ_CISS_DA is not set
# CONFIG_BLK_DEV_DAC960 is not set
# CONFIG_BLK_DEV_UMEM is not set
# CONFIG_BLK_DEV_COW_COMMON is not set
CONFIG_BLK_DEV_LOOP=y
# CONFIG_BLK_DEV_CRYPTOLOOP is not set
# CONFIG_BLK_DEV_NBD is not set
# CONFIG_BLK_DEV_SX8 is not set
# CONFIG_BLK_DEV_RAM is not set
CONFIG_BLK_DEV_RAM_COUNT=16
CONFIG_INITRAMFS_SOURCE=""
CONFIG_LBD=y
# CONFIG_CDROM_PKTCDVD is not set

#
# IO Schedulers
#
CONFIG_IOSCHED_NOOP=y
CONFIG_IOSCHED_AS=y
CONFIG_IOSCHED_DEADLINE=y
CONFIG_IOSCHED_CFQ=y
# CONFIG_ATA_OVER_ETH is not set

#
# ATA/ATAPI/MFM/RLL support
#
# CONFIG_IDE is not set

#
# SCSI device support
#
CONFIG_SCSI=y
CONFIG_SCSI_PROC_FS=y

#
# SCSI support type (disk, tape, CD-ROM)
#
CONFIG_BLK_DEV_SD=y
CONFIG_CHR_DEV_ST=y
# CONFIG_CHR_DEV_OSST is not set
CONFIG_BLK_DEV_SR=y
CONFIG_BLK_DEV_SR_VENDOR=y
CONFIG_CHR_DEV_SG=y
# CONFIG_CHR_DEV_SCH is not set

#
# Some SCSI devices (e.g. CD jukebox) support multiple LUNs #
CONFIG_SCSI_MULTI_LUN=y
# CONFIG_SCSI_CONSTANTS is not set
# CONFIG_SCSI_LOGGING is not set

#
# SCSI Transport Attributes
#
CONFIG_SCSI_SPI_ATTRS=y
# CONFIG_SCSI_FC_ATTRS is not set
# CONFIG_SCSI_ISCSI_ATTRS is not set

#
# SCSI low-level drivers
#
# CONFIG_BLK_DEV_3W_XXXX_RAID is not set
# CONFIG_SCSI_3W_9XXX is not set
# CONFIG_SCSI_ARCMSR is not set
# CONFIG_SCSI_7000FASST is not set
# CONFIG_SCSI_ACARD is not set
# CONFIG_SCSI_AHA152X is not set
# CONFIG_SCSI_AHA1542 is not set
# CONFIG_SCSI_AACRAID is not set
CONFIG_SCSI_AIC7XXX=y
CONFIG_AIC7XXX_CMDS_PER_DEVICE=253
CONFIG_AIC7XXX_RESET_DELAY_MS=2000
# CONFIG_AIC7XXX_DEBUG_ENABLE is not set
CONFIG_AIC7XXX_DEBUG_MASK=0
# CONFIG_AIC7XXX_REG_PRETTY_PRINT is not set
# CONFIG_SCSI_AIC7XXX_OLD is not set
# CONFIG_SCSI_AIC79XX is not set
# CONFIG_SCSI_DPT_I2O is not set
# CONFIG_SCSI_ADVANSYS is not set
# CONFIG_SCSI_IN2000 is not set
# CONFIG_MEGARAID_NEWGEN is not set
# CONFIG_MEGARAID_LEGACY is not set
# CONFIG_MEGARAID_SAS is not set
# CONFIG_SCSI_SATA is not set
# CONFIG_SCSI_BUSLOGIC is not set
# CONFIG_SCSI_CPQFCTS is not set
# CONFIG_SCSI_DMX3191D is not set
# CONFIG_SCSI_DTC3280 is not set
# CONFIG_SCSI_EATA is not set
# CONFIG_SCSI_EATA_PIO is not set
# CONFIG_SCSI_FUTURE_DOMAIN is not set
# CONFIG_SCSI_GDTH is not set
# CONFIG_SCSI_GENERIC_NCR5380 is not set
# CONFIG_SCSI_GENERIC_NCR5380_MMIO is not set
CONFIG_SCSI_IPS=y
# CONFIG_SCSI_INITIO is not set
# CONFIG_SCSI_INIA100 is not set
# CONFIG_SCSI_NCR53C406A is not set
# CONFIG_SCSI_SYM53C8XX_2 is not set
# CONFIG_SCSI_IPR is not set
# CONFIG_SCSI_PAS16 is not set
# CONFIG_SCSI_PSI240I is not set
# CONFIG_SCSI_QLOGIC_FAS is not set
CONFIG_SCSI_QLOGIC_ISP=y
# CONFIG_SCSI_QLOGIC_FC is not set
# CONFIG_SCSI_QLOGIC_1280 is not set
CONFIG_SCSI_QLA2XXX=y
# CONFIG_SCSI_QLA21XX is not set
# CONFIG_SCSI_QLA22XX is not set
# CONFIG_SCSI_QLA2300 is not set
# CONFIG_SCSI_QLA2322 is not set
# CONFIG_SCSI_QLA6312 is not set
# CONFIG_SCSI_LPFC is not set
# CONFIG_SCSI_SEAGATE is not set
# CONFIG_SCSI_SYM53C416 is not set
# CONFIG_SCSI_DC395x is not set
# CONFIG_SCSI_DC390T is not set
# CONFIG_SCSI_T128 is not set
# CONFIG_SCSI_U14_34F is not set
# CONFIG_SCSI_ULTRASTOR is not set
# CONFIG_SCSI_NSP32 is not set
# CONFIG_SCSI_DEBUG is not set

#
# Old CD-ROM drivers (not SCSI, not IDE)
#
# CONFIG_CD_NO_IDESCSI is not set

#
# Multi-device support (RAID and LVM)
#
# CONFIG_MD is not set

#
# Fusion MPT device support
#
# CONFIG_FUSION is not set
# CONFIG_FUSION_SPI is not set
# CONFIG_FUSION_FC is not set

#
# IEEE 1394 (FireWire) support
#
# CONFIG_IEEE1394 is not set

#
# I2O device support
#
# CONFIG_I2O is not set

#
# Networking support
#
CONFIG_NET=y

#
# Networking options
#
CONFIG_PACKET=y
CONFIG_PACKET_MMAP=y
CONFIG_UNIX=y
# CONFIG_NET_KEY is not set
CONFIG_INET=y
CONFIG_IP_MULTICAST=y
# CONFIG_IP_ADVANCED_ROUTER is not set
# CONFIG_IP_PNP is not set
# CONFIG_NET_IPIP is not set
# CONFIG_NET_IPGRE is not set
# CONFIG_IP_MROUTE is not set
# CONFIG_ARPD is not set
# CONFIG_SYN_COOKIES is not set
# CONFIG_INET_AH is not set
# CONFIG_INET_ESP is not set
# CONFIG_INET_IPCOMP is not set
# CONFIG_INET_TUNNEL is not set
CONFIG_IP_TCPDIAG=y
# CONFIG_IP_TCPDIAG_IPV6 is not set

#
# TCP congestion control
#
CONFIG_TCP_CONG_BIC=y
CONFIG_TCP_CONG_WESTWOOD=y
CONFIG_TCP_CONG_HTCP=y
# CONFIG_TCP_CONG_HSTCP is not set
# CONFIG_TCP_CONG_HYBLA is not set
# CONFIG_TCP_CONG_VEGAS is not set
# CONFIG_IPV6 is not set
# CONFIG_NETFILTER is not set

#
# SCTP Configuration (EXPERIMENTAL)
#
# CONFIG_IP_SCTP is not set
# CONFIG_ATM is not set
# CONFIG_BRIDGE is not set
# CONFIG_VLAN_8021Q is not set
# CONFIG_DECNET is not set
# CONFIG_LLC2 is not set
# CONFIG_IPX is not set
# CONFIG_ATALK is not set
# CONFIG_X25 is not set
# CONFIG_LAPB is not set
# CONFIG_NET_DIVERT is not set
# CONFIG_ECONET is not set
# CONFIG_WAN_ROUTER is not set

#
# QoS and/or fair queueing
#
# CONFIG_NET_SCHED is not set
# CONFIG_NET_CLS_ROUTE is not set

#
# Network testing
#
# CONFIG_NET_PKTGEN is not set
# CONFIG_KGDBOE is not set
# CONFIG_NETPOLL is not set
# CONFIG_NETPOLL_RX is not set
# CONFIG_NETPOLL_TRAP is not set
# CONFIG_NET_POLL_CONTROLLER is not set
# CONFIG_HAMRADIO is not set
# CONFIG_IRDA is not set
# CONFIG_BT is not set
# CONFIG_IEEE80211 is not set
CONFIG_NETDEVICES=y
CONFIG_DUMMY=y
# CONFIG_BONDING is not set
# CONFIG_EQUALIZER is not set
# CONFIG_TUN is not set

#
# ARCnet devices
#
# CONFIG_ARCNET is not set

#
# Ethernet (10 or 100Mbit)
#
CONFIG_NET_ETHERNET=y
CONFIG_MII=y
# CONFIG_HAPPYMEAL is not set
# CONFIG_SUNGEM is not set
# CONFIG_NET_VENDOR_3COM is not set
# CONFIG_LANCE is not set
# CONFIG_NET_VENDOR_SMC is not set
# CONFIG_NET_VENDOR_RACAL is not set

#
# Tulip family network device support
#
CONFIG_NET_TULIP=y
# CONFIG_DE2104X is not set
CONFIG_TULIP=y
# CONFIG_TULIP_MWI is not set
# CONFIG_TULIP_MMIO is not set
# CONFIG_TULIP_NAPI is not set
# CONFIG_DE4X5 is not set
# CONFIG_WINBOND_840 is not set
# CONFIG_DM9102 is not set
# CONFIG_AT1700 is not set
# CONFIG_DEPCA is not set
# CONFIG_HP100 is not set
# CONFIG_NET_ISA is not set
CONFIG_NET_PCI=y
# CONFIG_PCNET32 is not set
# CONFIG_AMD8111_ETH is not set
CONFIG_ADAPTEC_STARFIRE=y
# CONFIG_ADAPTEC_STARFIRE_NAPI is not set
# CONFIG_AC3200 is not set
# CONFIG_APRICOT is not set
# CONFIG_B44 is not set
# CONFIG_FORCEDETH is not set
# CONFIG_CS89x0 is not set
# CONFIG_DGRS is not set
CONFIG_EEPRO100=y
# CONFIG_E100 is not set
# CONFIG_FEALNX is not set
# CONFIG_NATSEMI is not set
# CONFIG_NE2K_PCI is not set
# CONFIG_8139CP is not set
# CONFIG_8139TOO is not set
# CONFIG_SIS900 is not set
# CONFIG_EPIC100 is not set
# CONFIG_SUNDANCE is not set
# CONFIG_TLAN is not set
# CONFIG_VIA_RHINE is not set
# CONFIG_NET_POCKET is not set

#
# Ethernet (1000 Mbit)
#
CONFIG_ACENIC=y
# CONFIG_ACENIC_OMIT_TIGON_I is not set
# CONFIG_DL2K is not set
CONFIG_E1000=y
# CONFIG_E1000_NAPI is not set
# CONFIG_NS83820 is not set
# CONFIG_HAMACHI is not set
# CONFIG_YELLOWFIN is not set
# CONFIG_R8169 is not set
# CONFIG_SKGE is not set
# CONFIG_SK98LIN is not set
# CONFIG_VIA_VELOCITY is not set
# CONFIG_TIGON3 is not set
# CONFIG_BNX2 is not set

#
# Ethernet (10000 Mbit)
#
# CONFIG_CHELSIO_T1 is not set
# CONFIG_IXGB is not set
# CONFIG_S2IO is not set

#
# Token Ring devices
#
# CONFIG_TR is not set

#
# Wireless LAN (non-hamradio)
#
# CONFIG_NET_RADIO is not set

#
# Wan interfaces
#
# CONFIG_WAN is not set
# CONFIG_FDDI is not set
# CONFIG_HIPPI is not set
# CONFIG_PPP is not set
# CONFIG_SLIP is not set
# CONFIG_NET_FC is not set
# CONFIG_SHAPER is not set
# CONFIG_NETCONSOLE is not set

#
# ISDN subsystem
#
# CONFIG_ISDN is not set

#
# Telephony Support
#
# CONFIG_PHONE is not set

#
# Input device support
#
CONFIG_INPUT=y

#
# Userland interfaces
#
CONFIG_INPUT_MOUSEDEV=y
CONFIG_INPUT_MOUSEDEV_PSAUX=y
CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
CONFIG_INPUT_JOYDEV=y
# CONFIG_INPUT_TSDEV is not set
CONFIG_INPUT_EVDEV=y
# CONFIG_INPUT_EVBUG is not set

#
# Input Device Drivers
#
CONFIG_INPUT_KEYBOARD=y
CONFIG_KEYBOARD_ATKBD=y
# CONFIG_KEYBOARD_SUNKBD is not set
# CONFIG_KEYBOARD_LKKBD is not set
# CONFIG_KEYBOARD_XTKBD is not set
# CONFIG_KEYBOARD_NEWTON is not set
CONFIG_INPUT_MOUSE=y
CONFIG_MOUSE_PS2=y
# CONFIG_MOUSE_SERIAL is not set
# CONFIG_MOUSE_INPORT is not set
# CONFIG_MOUSE_LOGIBM is not set
# CONFIG_MOUSE_PC110PAD is not set
# CONFIG_MOUSE_VSXXXAA is not set
# CONFIG_INPUT_JOYSTICK is not set
# CONFIG_INPUT_TOUCHSCREEN is not set
# CONFIG_INPUT_MISC is not set

#
# Hardware I/O ports
#
CONFIG_SERIO=y
CONFIG_SERIO_I8042=y
# CONFIG_SERIO_SERPORT is not set
# CONFIG_SERIO_CT82C710 is not set
# CONFIG_SERIO_PCIPS2 is not set
CONFIG_SERIO_LIBPS2=y
# CONFIG_SERIO_RAW is not set
# CONFIG_GAMEPORT is not set

#
# Character devices
#
CONFIG_VT=y
CONFIG_VT_CONSOLE=y
CONFIG_HW_CONSOLE=y
# CONFIG_SERIAL_NONSTANDARD is not set

#
# Serial drivers
#
CONFIG_SERIAL_8250=y
CONFIG_SERIAL_8250_CONSOLE=y
CONFIG_SERIAL_8250_NR_UARTS=4
# CONFIG_SERIAL_8250_EXTENDED is not set

#
# Non-8250 serial port support
#
CONFIG_SERIAL_CORE=y
CONFIG_SERIAL_CORE_CONSOLE=y
# CONFIG_SERIAL_JSM is not set
CONFIG_UNIX98_PTYS=y
CONFIG_LEGACY_PTYS=y
CONFIG_LEGACY_PTY_COUNT=256

#
# IPMI
#
# CONFIG_IPMI_HANDLER is not set

#
# Watchdog Cards
#
# CONFIG_WATCHDOG is not set
# CONFIG_HW_RANDOM is not set
# CONFIG_NVRAM is not set
# CONFIG_RTC is not set
# CONFIG_GEN_RTC is not set
# CONFIG_DTLK is not set
# CONFIG_R3964 is not set
# CONFIG_APPLICOM is not set
# CONFIG_SONYPI is not set

#
# Ftape, the floppy tape device driver
#
# CONFIG_FTAPE is not set
# CONFIG_AGP is not set
# CONFIG_DRM is not set
# CONFIG_MWAVE is not set
# CONFIG_RAW_DRIVER is not set
# CONFIG_HANGCHECK_TIMER is not set

#
# TPM devices
#
# CONFIG_TCG_TPM is not set

#
# I2C support
#
# CONFIG_I2C is not set

#
# Dallas's 1-wire bus
#
# CONFIG_W1 is not set

#
# Misc devices
#
# CONFIG_IBM_ASM is not set

#
# Multimedia devices
#
# CONFIG_VIDEO_DEV is not set

#
# Digital Video Broadcasting Devices
#
# CONFIG_DVB is not set

#
# Graphics support
#
# CONFIG_FB is not set
# CONFIG_VIDEO_SELECT is not set

#
# Console display driver support
#
CONFIG_VGA_CONSOLE=y
# CONFIG_MDA_CONSOLE is not set
CONFIG_DUMMY_CONSOLE=y

#
# Sound
#
# CONFIG_SOUND is not set

#
# USB support
#
CONFIG_USB_ARCH_HAS_HCD=y
CONFIG_USB_ARCH_HAS_OHCI=y
# CONFIG_USB is not set

#
# USB Gadget Support
#
# CONFIG_USB_GADGET is not set

#
# MMC/SD Card support
#
# CONFIG_MMC is not set

#
# InfiniBand support
#
# CONFIG_INFINIBAND is not set

#
# SN Devices
#

#
# Distributed Lock Manager
#
# CONFIG_DLM is not set

#
# File systems
#
CONFIG_EXT2_FS=y
# CONFIG_EXT2_FS_XATTR is not set
# CONFIG_EXT2_FS_XIP is not set
CONFIG_EXT3_FS=y
CONFIG_EXT3_FS_XATTR=y
# CONFIG_EXT3_FS_POSIX_ACL is not set
# CONFIG_EXT3_FS_SECURITY is not set
CONFIG_JBD=y
# CONFIG_JBD_DEBUG is not set
CONFIG_FS_MBCACHE=y
# CONFIG_REISER4_FS is not set
# CONFIG_REISERFS_FS is not set
CONFIG_JFS_FS=y
# CONFIG_JFS_POSIX_ACL is not set
# CONFIG_JFS_SECURITY is not set
# CONFIG_JFS_DEBUG is not set
# CONFIG_JFS_STATISTICS is not set

#
# XFS support
#
# CONFIG_XFS_FS is not set
# CONFIG_OCFS2_FS is not set
# CONFIG_MINIX_FS is not set
# CONFIG_ROMFS_FS is not set
CONFIG_INOTIFY=y
# CONFIG_QUOTA is not set
CONFIG_DNOTIFY=y
# CONFIG_AUTOFS_FS is not set
# CONFIG_AUTOFS4_FS is not set

#
# Caches
#
# CONFIG_FSCACHE is not set
# CONFIG_FUSE_FS is not set

#
# CD-ROM/DVD Filesystems
#
# CONFIG_ISO9660_FS is not set
# CONFIG_UDF_FS is not set

#
# DOS/FAT/NT Filesystems
#
# CONFIG_MSDOS_FS is not set
# CONFIG_VFAT_FS is not set
# CONFIG_NTFS_FS is not set

#
# Pseudo filesystems
#
CONFIG_PROC_FS=y
CONFIG_PROC_KCORE=y
CONFIG_SYSFS=y
# CONFIG_DEVFS_FS is not set
# CONFIG_DEVPTS_FS_XATTR is not set
CONFIG_TMPFS=y
# CONFIG_TMPFS_XATTR is not set
# CONFIG_HUGETLBFS is not set
# CONFIG_HUGETLB_PAGE is not set
CONFIG_RAMFS=y
# CONFIG_CONFIGFS_FS is not set
# CONFIG_RELAYFS_FS is not set

#
# Miscellaneous filesystems
#
# CONFIG_ADFS_FS is not set
# CONFIG_AFFS_FS is not set
# CONFIG_HFS_FS is not set
# CONFIG_HFSPLUS_FS is not set
# CONFIG_BEFS_FS is not set
# CONFIG_BFS_FS is not set
# CONFIG_EFS_FS is not set
# CONFIG_CRAMFS is not set
# CONFIG_VXFS_FS is not set
# CONFIG_HPFS_FS is not set
# CONFIG_QNX4FS_FS is not set
# CONFIG_SYSV_FS is not set
# CONFIG_UFS_FS is not set

#
# Network File Systems
#
CONFIG_NFS_FS=y
CONFIG_NFS_V3=y
# CONFIG_NFS_V3_ACL is not set
# CONFIG_NFS_V4 is not set
# CONFIG_NFS_DIRECTIO is not set
CONFIG_NFSD=y
CONFIG_NFSD_V3=y
# CONFIG_NFSD_V3_ACL is not set
# CONFIG_NFSD_V4 is not set
# CONFIG_NFSD_TCP is not set
CONFIG_LOCKD=y
CONFIG_LOCKD_V4=y
CONFIG_EXPORTFS=y
CONFIG_NFS_COMMON=y
CONFIG_SUNRPC=y
# CONFIG_RPCSEC_GSS_KRB5 is not set
# CONFIG_RPCSEC_GSS_SPKM3 is not set
# CONFIG_SMB_FS is not set
# CONFIG_CIFS is not set
# CONFIG_NCP_FS is not set
# CONFIG_CODA_FS is not set
# CONFIG_AFS_FS is not set

#
# Partition Types
#
# CONFIG_PARTITION_ADVANCED is not set
CONFIG_MSDOS_PARTITION=y

#
# Native Language Support
#
CONFIG_NLS=y
CONFIG_NLS_DEFAULT="iso8859-1"
# CONFIG_NLS_CODEPAGE_437 is not set
# CONFIG_NLS_CODEPAGE_737 is not set
# CONFIG_NLS_CODEPAGE_775 is not set
# CONFIG_NLS_CODEPAGE_850 is not set
# CONFIG_NLS_CODEPAGE_852 is not set
# CONFIG_NLS_CODEPAGE_855 is not set
# CONFIG_NLS_CODEPAGE_857 is not set
# CONFIG_NLS_CODEPAGE_860 is not set
# CONFIG_NLS_CODEPAGE_861 is not set
# CONFIG_NLS_CODEPAGE_862 is not set
# CONFIG_NLS_CODEPAGE_863 is not set
# CONFIG_NLS_CODEPAGE_864 is not set
# CONFIG_NLS_CODEPAGE_865 is not set
# CONFIG_NLS_CODEPAGE_866 is not set
# CONFIG_NLS_CODEPAGE_869 is not set
# CONFIG_NLS_CODEPAGE_936 is not set
# CONFIG_NLS_CODEPAGE_950 is not set
# CONFIG_NLS_CODEPAGE_932 is not set
# CONFIG_NLS_CODEPAGE_949 is not set
# CONFIG_NLS_CODEPAGE_874 is not set
# CONFIG_NLS_ISO8859_8 is not set
# CONFIG_NLS_CODEPAGE_1250 is not set
# CONFIG_NLS_CODEPAGE_1251 is not set
# CONFIG_NLS_ASCII is not set
# CONFIG_NLS_ISO8859_1 is not set
# CONFIG_NLS_ISO8859_2 is not set
# CONFIG_NLS_ISO8859_3 is not set
# CONFIG_NLS_ISO8859_4 is not set
# CONFIG_NLS_ISO8859_5 is not set
# CONFIG_NLS_ISO8859_6 is not set
# CONFIG_NLS_ISO8859_7 is not set
# CONFIG_NLS_ISO8859_9 is not set
# CONFIG_NLS_ISO8859_13 is not set
# CONFIG_NLS_ISO8859_14 is not set
# CONFIG_NLS_ISO8859_15 is not set
# CONFIG_NLS_KOI8_R is not set
# CONFIG_NLS_KOI8_U is not set
# CONFIG_NLS_UTF8 is not set

#
# Profiling support
#
CONFIG_PROFILING=y
CONFIG_OPROFILE=y

#
# Kernel hacking
#
# CONFIG_PRINTK_TIME is not set
CONFIG_DEBUG_KERNEL=y
CONFIG_MAGIC_SYSRQ=y
CONFIG_LOG_BUF_SHIFT=17
CONFIG_DETECT_SOFTLOCKUP=y
# CONFIG_SCHEDSTATS is not set
# CONFIG_DEBUG_SLAB is not set
# CONFIG_DEBUG_SPINLOCK is not set
# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
# CONFIG_DEBUG_KOBJECT is not set
# CONFIG_DEBUG_HIGHMEM is not set
CONFIG_DEBUG_BUGVERBOSE=y
CONFIG_DEBUG_INFO=y
# CONFIG_PAGE_OWNER is not set
# CONFIG_DEBUG_FS is not set
# CONFIG_FRAME_POINTER is not set
CONFIG_EARLY_PRINTK=y
# CONFIG_DEBUG_STACKOVERFLOW is not set
# CONFIG_KPROBES is not set
# CONFIG_DEBUG_STACK_USAGE is not set
# CONFIG_DEBUG_PAGEALLOC is not set
# CONFIG_4KSTACKS is not set
CONFIG_X86_FIND_SMP_CONFIG=y
CONFIG_X86_MPPARSE=y
# CONFIG_KGDB is not set

#
# Security options
#
# CONFIG_KEYS is not set
# CONFIG_SECURITY is not set

#
# Cryptographic options
#
CONFIG_CRYPTO=y
# CONFIG_CRYPTO_HMAC is not set
# CONFIG_CRYPTO_NULL is not set
CONFIG_CRYPTO_MD4=y
CONFIG_CRYPTO_MD5=y
CONFIG_CRYPTO_SHA1=y
# CONFIG_CRYPTO_SHA256 is not set
# CONFIG_CRYPTO_SHA512 is not set
# CONFIG_CRYPTO_WP512 is not set
# CONFIG_CRYPTO_TGR192 is not set
CONFIG_CRYPTO_DES=y
# CONFIG_CRYPTO_BLOWFISH is not set
# CONFIG_CRYPTO_TWOFISH is not set
# CONFIG_CRYPTO_SERPENT is not set
# CONFIG_CRYPTO_AES_586 is not set
# CONFIG_CRYPTO_CAST5 is not set
# CONFIG_CRYPTO_CAST6 is not set
# CONFIG_CRYPTO_TEA is not set
# CONFIG_CRYPTO_ARC4 is not set
# CONFIG_CRYPTO_KHAZAD is not set
# CONFIG_CRYPTO_ANUBIS is not set
# CONFIG_CRYPTO_DEFLATE is not set
# CONFIG_CRYPTO_MICHAEL_MIC is not set
# CONFIG_CRYPTO_CRC32C is not set
# CONFIG_CRYPTO_TEST is not set

#
# Hardware crypto devices
#
# CONFIG_CRYPTO_DEV_PADLOCK is not set

#
# Library routines
#
# CONFIG_CRC_CCITT is not set
CONFIG_CRC32=y
# CONFIG_LIBCRC32C is not set
CONFIG_GENERIC_HARDIRQS=y
CONFIG_GENERIC_IRQ_PROBE=y
CONFIG_GENERIC_PENDING_IRQ=y
CONFIG_X86_SMP=y
CONFIG_X86_HT=y
CONFIG_X86_BIOS_REBOOT=y
CONFIG_X86_TRAMPOLINE=y
CONFIG_PC=y

#10 lore raw

2.6.12-rc5-mm2: "bic unavailable using TCP reno" messages

In reply to Andrew Morton
Quoted 7 lines · Andrew Morton

...
Changes since 2.6.12-rc5-mm1:
...
+tcp-tcp_infra.patch
...
Steve Hemminger's TCP enhancements.
...

I said "no" to CONFIG_TCP_CONG_BIC, and now my syslog is full of messages
kernel: bic unavailable using TCP reno

I have no problem with such a message being shown once - but once should be enough.

cu
Adrian

Signature · 4 lines
       "Is there not promise of rain?" Ling Tan asked suddenly out
        of the darkness. There had been need of rain for many days.
       "Only a promise," Lao Er said.
                                       Pearl S. Buck - Dragon Seed
#11 lore raw

Re: 2.6.12-rc5-mm2: "bic unavailable using TCP reno" messages

Quoted 11 lines · Adrian Bunk
Quoted 7 lines · Andrew Morton

...
Changes since 2.6.12-rc5-mm1:
...
+tcp-tcp_infra.patch
...
Steve Hemminger's TCP enhancements.
...

Quoted 5 lines

I said "no" to CONFIG_TCP_CONG_BIC, and now my syslog is full of messages
kernel: bic unavailable using TCP reno

I have no problem with such a message being shown once - but once should be enough.

The best solution for this would be to check the available protocols at setup time and not at connection creation time. This would also provide a better feedback to the user, since he will either see that what he set was taken, or it wasn't.

In the current mechanism you can set the protocol to 'foo' and it will show back as 'foo'. You'll get complaints only once a connection is attempted with this protocol.

It does mean some extra work in the sysctl stage, but it's better IMO to do it there rather than at connection setup time.

Baruch

#12 lore raw

Re: 2.6.12-rc5-mm2: "bic unavailable using TCP reno" messages

Quoted 23 lines · On Thu, 02 Jun 2005 14:58:17 +0100 Baruch Even <[email protected]> wrote:
Quoted 11 lines · Adrian Bunk
Quoted 7 lines · Andrew Morton

...
Changes since 2.6.12-rc5-mm1:
...
+tcp-tcp_infra.patch
...
Steve Hemminger's TCP enhancements.
...

Quoted 5 lines

I said "no" to CONFIG_TCP_CONG_BIC, and now my syslog is full of messages
kernel: bic unavailable using TCP reno

I have no problem with such a message being shown once - but once should be enough.

The best solution for this would be to check the available protocols at setup time and not at connection creation time. This would also provide a better feedback to the user, since he will either see that what he set was taken, or it wasn't.

Quoted 8 lines

In the current mechanism you can set the protocol to 'foo' and it will show back as 'foo'. You'll get complaints only once a connection is attempted with this protocol.

It does mean some extra work in the sysctl stage, but it's better IMO to do it there rather than at connection setup time.

Baruch

Your right, the sysctl handler should be smarter, but that is not the problem here. The problem is that the default value is set to be BIC to be compatible with earlier kernels. Since 75% of the world isn't smart enough to figure out how to use sysctl, there is a question of what the default should be, and what to do if that is missing.

One version had a messy ifdef chain to try and avoid the warning:

char sysctl_tcp_congestion_control[] =

#if defined(CONFIG_TCP_BIC)
	"bic"
#elif defined(CONFIG_TCP_HTCP)
	"htcp"
#else
	"reno"
#endif
	;

but that was ugly.

Another possibility is putting it in as yet another config value at kernel build time.

To suppress the warning repeating, probably the best solution would be rewrite the string if we have to revert to reno. But carefully to avoid SMP issues. This also implies a smarter sysctl string handler for this value as well.

P.s: saw your comparison paper, after a little more corroboration I would like to make H-TCP the default.

#13 lore raw

Re: 2.6.12-rc5-mm2: "bic unavailable using TCP reno" messages

Quoted 22 lines · Stephen Hemminger
Quoted 1 line · On Thu, 02 Jun 2005 14:58:17 +0100 Baruch Even <[email protected]> wrote:

...

Your right, the sysctl handler should be smarter, but that is not the problem here. The problem is that the default value is set to be BIC to be compatible with earlier kernels. Since 75% of the world isn't smart enough to figure out how to use sysctl, there is a question of what the default should be, and what to do if that is missing.

One version had a messy ifdef chain to try and avoid the warning:

char sysctl_tcp_congestion_control[] =

#if defined(CONFIG_TCP_BIC)
	"bic"
#elif defined(CONFIG_TCP_HTCP)
	"htcp"
#else
	"reno"
#endif
	;
Quoted 4 lines

but that was ugly.

Another possibility is putting it in as yet another config value at kernel build time.
...

One thing that currently makes all solutions harder (and the #ifdef example above not ugly but simply wrong) is that you allow modular congestion control options for the always static net support.

Is this really required?

The IO schedulers have a similar problem, and they are using the #ifdef approach for selecting the default.

One approach is to actually choose the default using #ifdef's.

You could also do any kind of runtime selection, but please don't print the warning more than once.

cu
Adrian

Signature · 4 lines
       "Is there not promise of rain?" Ling Tan asked suddenly out
        of the darkness. There had been need of rain for many days.
       "Only a promise," Lao Er said.
                                       Pearl S. Buck - Dragon Seed
#14 lore raw

Re: 2.6.12-rc5-mm2: "bic unavailable using TCP reno" messages

Here is what I am working on as better way to make the sysctl selection. I am not totally happy with the way the default congestion control value is determined by the load order. But it does seem good that if you load "tcp_xxx" module and it registers it becomes the default.

include/net/tcp.h +2 -0
Index: 2.6.12-rc5-tcp3/include/net/tcp.h
===================================================================
@@ -1242,6 +1242,8 @@ extern int tcp_register_congestion_contr
 extern void tcp_unregister_congestion_control(struct tcp_congestion_ops *type);
 extern void tcp_init_congestion_control(struct tcp_sock *tp);
 extern void tcp_release_congestion_control(struct tcp_sock *tp);
+extern int tcp_set_congestion_control(const char *name);
+extern void tcp_get_congestion_control(char *name);
 
 extern struct tcp_congestion_ops tcp_reno;
 extern u32 tcp_reno_ssthresh(struct tcp_sock *tp);
net/ipv4/tcp_cong.c +45 -30

121 lines not on this page · raw message

net/ipv4/sysctl_net_ipv4.c +49 -7

75 lines not on this page · raw message

#15 lore raw

Re: 2.6.12-rc5-mm2: "bic unavailable using TCP reno" messages

Quoted 4 lines · Stephen Hemminger

Here is what I am working on as better way to make the sysctl selection. I am not totally happy with the way the default congestion control value is determined by the load order. But it does seem good that if you load "tcp_xxx" module and it registers it becomes the default.

Looks good.

Quoted 5 lines
net/ipv4/sysctl_net_ipv4.c +1 -0
@@ -120,6 +117,52 @@ static int ipv4_sysctl_forward_strategy(
 	return 1;
 }
 
+static int proc_tcp_congestion_control(ctl_table *ctl, int write, struct file * filp,

net/ipv4/sysctl_net_ipv4.c static int ipv4_sysctl_forward_strategy( · line 130

Quoted 10 lines
net/ipv4/sysctl_net_ipv4.c +10 -0
+				       void __user *buffer, size_t *lenp, loff_t *ppos)
+{
+	char val[TCP_CA_NAME_MAX];
+	ctl_table tbl = {
+		.data = val,
+		.maxlen = TCP_CA_NAME_MAX,
+	};
+	int ret;
+
+	tcp_get_congestion_control(val);

Maybe we should call this tcp_get_current_congestion_control(), the current name implies (to me) that you give it a name and it returns the the ca struct. get_current might also just return the current one and the strcpy can be done here.

Otherwise you probably should document the tcp_get_congestion_control() to say what size of string it accepts.

Baruch

#16 lore raw

PATCH 1/1 fix recursive IPW2200 dependencies

In reply to Andrew Morton
Quoted 7 lines · Andrew Morton

...
Changes since 2.6.12-rc5-mm1:
...
+git-netdev-we18-ieee80211-wifi.patch

Various things added and merged in netdev land.
...

This results in recursive dependencies:
- IPW2200 depends on NET_RADIO
- IPW2200 selects IEEE80211
- IEEE80211 selects NET_RADIO

This patch fixes the IPW2200 dependencies in a way that they are similar to the IPW2100 dependencies.

Signed-off-by Adrian Bunk <[email protected]>
drivers/net/wireless/Kconfig renamed from drivers/net/wireless/Kconfig.old +1 -2
@@ -192,9 +192,8 @@
 
 config IPW2200
 	tristate "Intel PRO/Wireless 2200BG and 2915ABG Network Connection"
-	depends on NET_RADIO && PCI
+	depends on IEEE80211 && PCI
 	select FW_LOADER
-	select IEEE80211
 	---help---
           A driver for the Intel PRO/Wireless 2200BG and 2915ABG Network
 	  Connection adapters.
#17 lore raw

RE: [-mm patch] fix recursive IPW2200 dependencies

Quoted 38 lines · Andrew Morton
Quoted 7 lines

...
Changes since 2.6.12-rc5-mm1:
...
+git-netdev-we18-ieee80211-wifi.patch

Various things added and merged in netdev land.
...

This results in recursive dependencies:
- IPW2200 depends on NET_RADIO
- IPW2200 selects IEEE80211
- IEEE80211 selects NET_RADIO

This patch fixes the IPW2200 dependencies in a way that they are similar
to the IPW2100 dependencies.

Signed-off-by Adrian Bunk <[email protected]>

---
linux-2.6.12-rc5-mm2-full/drivers/net/wireless/Kconfig.old

2005-06-02 22:04:02.000000000 +0200
+++ linux-2.6.12-rc5-mm2-full/drivers/net/wireless/Kconfig
2005-06-02 22:04:40.000000000 +0200
drivers/net/wireless/Kconfig renamed from drivers/net/wireless/Kconfig.old +0 -0
@@ -192,9 +192,8 @@
 
 config IPW2200
 	tristate "Intel PRO/Wireless 2200BG and 2915ABG Network

Connection"

drivers/net/wireless/Kconfig renamed from drivers/net/wireless/Kconfig.old +1 -2
-	depends on NET_RADIO && PCI
+	depends on IEEE80211 && PCI
 	select FW_LOADER
-	select IEEE80211
 	---help---
           A driver for the Intel PRO/Wireless 2200BG and
Quoted 2 lines

2915ABG Network
Connection adapters.

I think the normal usage of the name is Intel PRO/Wireless 2200BG/2915ABG Network Connection. I'm just saying this in case that you care about Intel Trademarking or about a more unified usage of the name of the Adapter.

maybe this is something silly.

.Alejandro

#18 lore raw
In reply to Andrew Morton

Hi Andrew,

in case 2.6.12 should fully support gcc 4.0:

The only patch from -mm that seems to be required for fixing a compilation on i386 with gcc 4.0 is
drivers-net-hamradio-baycom_eppc-cleanups.patch

Whether this is feasible or not is your choice.

cu
Adrian

Signature · 4 lines
       "Is there not promise of rain?" Ling Tan asked suddenly out
        of the darkness. There had been need of rain for many days.
       "Only a promise," Lao Er said.
                                       Pearl S. Buck - Dragon Seed
#19 lore raw
In reply to Andrew Morton

Hi Andrew,

I'm encountering the following annoying bug messages in 2.6.12-rc5-mm1 and -mm2 that I can't reproduce in 2.6.12-rc5 with the sym53c8xx_2 SCSI driver. I don't use the SCSI card/drive for booting but the driver is compiled into my kernel, and reading from the drive seems OK. Booting -mm2 I get the following :

scan_host_selected+0xdd/0xf0
 [<c03e10e0>] scsi_scan_host+0x30/0x40
 [<c03e8d5f>] sym2_probe+0xef/0x140
 [<c0105800>] do_simd_coprocessor_error+0x70/0xb0
 [<c0102000>] sys_get_thread_area+0x10/0x140
 [<c0331722>] pci_device_probe_static+0x52/0x70
 [<c033177c>] __pci_device_probe+0x3c/0x50
 [<c03317bf>] pci_device_probe+0x2f/0x50
 [<c039ee1b>] driver_probe_device+0x3b/0xb0
 [<c039ef10>] __driver_attach+0x0/0x60
 [<c039ef60>] __driver_attach+0x50/0x60
 [<c039e499>] bus_for_each_dev+0x69/0x80
 [<c039ef95>] driver_attach+0x25/0x30
 [<c039ef10>] __driver_attach+0x0/0x60
 [<c039e968>] bus_add_driver+0x88/0xc0
 [<c0331900>] pci_device_shutdown+0x0/0x30
 [<c0331a9d>] pci_register_driver+0x7d/0xa0
 [<c06c5732>] sym2_init+0x32/0x60
 [<c06a2a7b>] do_initcalls+0x2b/0xc0
  [<c01003b9>] init+0x99/0x1b0
  [<c0100320>] init+0x0/0x1b0
 [<c0101245>] kernel_thread_helper+0x5/0x10

Followed by many repeats of:

BUG: atomic counter underflow at:
 [<c03a5c41>] blk_cleanup_queue+0xc1/0xd0
 [<c03e1739>] scsi_device_dev_release+0x139/0x190
 [<c039d4cb>] device_release+0x5b/0x60
 [<c03247b8>] kobject_cleanup+0x98/0xa0
 [<c03247c0>] kobject_release+0x0/0x10
 [<c0325225>] kref_put+0x45/0xd0
 [<c03247ef>] kobject_put+0x1f/0x30
 [<c03247c0>] kobject_release+0x0/0x10
 [<c03dfb6e>] scsi_alloc_sdev+0x1ae/0x1f0
 [<c03e051f>] scsi_probe_and_add_lun+0x6f/0x1f0
 [<c032470a>] kobject_get+0x1a/0x30
 [<c03e0e73>] scsi_scan_target+0xe3/0x170
 [<c03e0f9d>] scsi_scan_channel+0x9d/0xc0
 [<c03e109d>] scsi_scan_host_selected+0xdd/0xf0
 [<c03e10e0>] scsi_scan_host+0x30/0x40
 [<c03e8d5f>] sym2_probe+0xef/0x140
 [<c0105800>] do_simd_coprocessor_error+0x70/0xb0
 [<c0102000>] sys_get_thread_area+0x10/0x140
 [<c0331722>] pci_device_probe_static+0x52/0x70
 [<c033177c>] __pci_device_probe+0x3c/0x50
 [<c03317bf>] pci_device_probe+0x2f/0x50
 [<c039ee1b>] driver_probe_device+0x3b/0xb0
 [<c039ef10>] __driver_attach+0x0/0x60
 [<c039ef60>] __driver_attach+0x50/0x60
 [<c039e499>] bus_for_each_dev+0x69/0x80
 [<c039ef95>] driver_attach+0x25/0x30
 [<c039ef10>] __driver_attach+0x0/0x60
 [<c039e968>] bus_add_driver+0x88/0xc0
 [<c0331900>] pci_device_shutdown+0x0/0x30
 [<c0331a9d>] pci_register_driver+0x7d/0xa0
 [<c06c5732>] sym2_init+0x32/0x60
 [<c06a2a7b>] do_initcalls+0x2b/0xc0
  [<c01003b9>] init+0x99/0x1b0
  [<c0100320>] init+0x0/0x1b0
 [<c0101245>] kernel_thread_helper+0x5/0x10

Thanks,
Yani