2.6.12?
So... are we gonna see 2.6.12 sometime soon?
Jeff
Quoted 4 lines · Jeff Garzik
So... are we gonna see 2.6.12 sometime soon?
Current plan is -rc6 in a few days, 2.6.12 a week after that.
My things-to-worry-about folder still has 244 entries. Nobody seems to care much. Poor me.
Lots of USB problems, quite a few input problems. fbdev, ACPI, ATAPI. All the usual suspects.
Subject: 2.6.11.4: ACPI, IRQ 11 disabled, Ethernet/USB stops working
Subject: 2.6.11-mm4 and 2.6.12-rc1-mm1
Subject: 2.6.12-rc1-mm[1-3]: ACPI battery monitor does not work
Subject: 2.6.12-rc2-mm3 and bttv -> kernel panic
Subject: 2.6.12rc2: Oops with pcmcia ide flash disk
Subject: 2.6.12-rc5/2.6.12-rc5-git8 USB problems
Subject: 2.6.12-rc5 is broken in nvidia Ck804 Opteron MB/with dual core du
Subject: 2.6.12-rc5-mm1 breaks serio: i8042 AUX port
Subject: 2.6.12-rc5 : repeatable modprobe usb-storage hang
Subject: 2.6.12-rcx networking oops
Subject: Adaptec 2010S i2o + x86_64 doesn't work
Subject: Adaptec 29160 + Promise Ultratrak100 TX8 problems
Subject: amd64 2.6.11 oops on modprobe
Subject: ATI Radeon 9000 M9 mobitility troubles on linux 2.6
Subject: [BUG] 2.6.11- sym53c8xx Broken on pp64
Subject: [Bug 2698] Kernel Crash; Could be related to quotas on ext3
Subject: [Bug 3054] madvise doesn't fail for exceding RSS limit.
Subject: [Bug 4282] ALSA driver in Linux 2.6.11 causes a kernel panic when loading the EMU10K1 driver
Subject: [Bug 4342] "Near touchpad upper buttons" not working on a dell
Subject: [Bug 4377] New: Severe memory leak issue
Subject: [Bug 4382] New: first joystick button mapped to extra number
Subject: [Bug 4481] hang at boot from kernels 2.6.9 and above
Subject: [Bug 4665] New: ACPI battery monitor does not work
Subject: [Bug 4688] CD devices have their capacity set incorrectly, preventing
Subject: Bug in 2.6.11.11 - udp_poll(), fragments + CONFIG_HIGHMEM
Subject: Bug in 8520.c - port.type not set for serial console
Subject: [BUG] Lockup using ALi SATA controller (sata_uli)
Subject: [Bugme-new]
Subject: [Bugme-new] [Bug 4281] New: ALPS Touchpad Tap-to-Click Broken
Subject: [Bugme-new] [Bug 4282] New: ALSA driver in Linux 2.6.11 causes a
Subject: [Bugme-new] [Bug 4295] New: Garbage all over the screen when using
Subject: [Bugme-new] [Bug 4297] New: VIA 82xxx sound problem with kernel
Subject: [Bugme-new] [Bug 4299] New: glidepoint touchpad movement broken
Subject: [Bugme-new] [Bug 4300] New: hpt366 S-ATA driver causes the kernel
Subject: [Bugme-new] [Bug 4306] New: USB no longer survives resume in 2.6.11
Subject: [Bugme-new] [Bug 4315] New: DMA timeouts on ASUS M2400N
Subject: [Bugme-new] [Bug 4318] New: fcntly system calls with options
Subject: [Bugme-new] [Bug 4323] New: no cursor in console with intelfb
Subject: [Bugme-new] [Bug 4340] New: ohci_1394 module breaks S3 suspend
Subject: [Bugme-new] [Bug 4342] New: "Near touchpad upper buttons" not
Subject: [Bugme-new] [Bug 4347] New: savavgfb ddc eeprom oops when "sensors"
Subject: [Bugme-new] [Bug 4352] New: Problems with PowerNow on Athlon-XP
Subject: [Bugme-new] [Bug 4358] New: bluetooth-dongle (hci_usb) doesn't work
Subject: [Bugme-new] [Bug 4359] New: With HT off in bios,
Subject: [Bugme-new] [Bug 4363] New: panic spin_lock already locked
Subject: [Bugme-new] [Bug 4365] New: On Running File System stress on XFS
Subject: [Bugme-new] [Bug 4368] New: b44 driver + udev: does not work if
Subject: [Bugme-new] [Bug 4370] New: Pinnacle PCI SAT-TV card: cx24110
Subject: [Bugme-new] [Bug 4371] New: Battery doesn't work after suspend
Subject: [Bugme-new] [Bug 4372] New: unplugging stv680-based pencam while in
Subject: [Bugme-new] [Bug 4373] New: USB DVDRW hangs during burning or
Subject: [Bugme-new] [Bug 4374] New: bug in libata-core with sata_sil
Subject: [Bugme-new] [Bug 4375] New: Touchpad & Keyboard freeze
Subject: [Bugme-new] [Bug 4378] New: Intel 915GM not supported by Kernel
Subject: [Bugme-new] [Bug 4379] New: Default sampling rates for ondemand
Subject: [Bugme-new] [Bug 4380] New: via_velocity: receiver hang after
Subject: [Bugme-new] [Bug 4386] New: tridentfb with ACCEL leaves artefacts
Subject: [Bugme-new] [Bug 4387] New: cannot write to usb flash disk
Subject: [Bugme-new] [Bug 4390] New: power saving doesn't work on
Subject: [Bugme-new] [Bug 4392] New: powernow-k8 driver doesn't work with
Subject: [Bugme-new] [Bug 4393] New: hangs on calling \_SB_.BAT0._STA on
Subject: [Bugme-new] [Bug 4394] New: Intel 855 (i810): 1280x768 wide screen
Subject: [Bugme-new] [Bug 4404] New: NFS client hangs and does not umount
Subject: [Bugme-new] [Bug 4405] New: Badness in kref_get followed by host
Subject: [Bugme-new] [Bug 4406] New: Kernel panic when load DMX3191D module
Subject: [Bugme-new] [Bug 4407] New: cdc_acm oops on audiovox 9900 if usb
Subject: [Bugme-new] [Bug 4410] New: ACPI on ASUS L4500R doesn't work,
Subject: [Bugme-new] [Bug 4414] New: Problem: USB bus hangs after 'lsusb
Subject: [Bugme-new] [Bug 4425] New: Problem with snd-ens1371 module not
Subject: [Bugme-new] [Bug 4431] New: Crash using usblp.c "kernel access of
Subject: [Bugme-new] [Bug 4432] New: race condition created with usblp.c in
Subject: [Bugme-new] [Bug 4438] New: Badness in blk_remove_plug at
Subject: [Bugme-new] [Bug 4439] New: hda: DMA Timeout Error
Subject: [Bugme-new] [Bug 4443] New: Unable to switch channels with DVB
Subject: [Bugme-new] [Bug 4447] New: USB Card reader does not mount CF disk
Subject: [Bugme-new] [Bug 4448] New: Genius G12U GamePad (USB) Button -
Subject: [Bugme-new] [Bug 4451] New: VIA Rhine II: media detection fails on
Subject: [Bugme-new] [Bug 4452] New: Computer freeze - when I try to capture
Subject: [Bugme-new] [Bug 4453] New: Since 2.6.10 with radeon 9000 mobile
Subject: [Bugme-new] [Bug 4454] New: Mobile Intel Prescott with Enhanced
Subject: [Bugme-new] [Bug 4457] New: oops in get_compat_sigevent
Subject: [Bugme-new] [Bug 4460] New: PCMCIA hard disk not started correctly
Subject: [Bugme-new] [Bug 4461] New: USB disk not recognised
Subject: [Bugme-new] [Bug 4465] New: Problems with Intel ICH6-M Sonoma
Subject: [Bugme-new] [Bug 4466] New: Can't connect USB-Camera with new
Subject: [Bugme-new] [Bug 4468] New: Upgrade to 2.6.11.6 results in no
Subject: [Bugme-new] [Bug 4475] New: PCI memory address incorrectly (?) sign
Subject: [Bugme-new] [Bug 4486] New: Losing keypresses, ghost presses,
Subject: [Bugme-new] [Bug 4494] New: Laptop up middle scroll mouse button
Subject: [Bugme-new] [Bug 4496] New: Interrupt-problem depends on
Subject: [Bugme-new] [Bug 4497] New: getdents gives empty/random result upon
Subject: [Bugme-new] [Bug 4501] New: PCMCIA Card not powered on - CardBus
Subject: [Bugme-new] [Bug 4503] New: USB keyboard: usb_submit_urb(ctrl)
Subject: [Bugme-new] [Bug 4507] New: device-mapper crypt can't encrypt cdrom
Subject: [Bugme-new] [Bug 4510] New: Something in USB (uhci_hcd?)
Subject: [Bugme-new] [Bug 4513] New: Radeon driver in 2.6.10 through
Subject: [Bugme-new] [Bug 4514] New: cdrecord with /dev/hda hangs machine
Subject: [Bugme-new] [Bug 4518] New: bug report for bttv and tuner card
Subject: [Bugme-new] [Bug 4541] New: device mapper corruption after
Subject: [Bugme-new] [Bug 4551] New: pcnet32 don't follow module options
Subject: [Bugme-new] [Bug 4557] New: P4P800-MX (possibly others with i865)
Subject: [Bugme-new] [Bug 4562] New: Random crashes when generating a lot of
Subject: [Bugme-new] [Bug 4572] New: psmouse module is broken on 2.6.x
Subject: [Bugme-new] [Bug 4589] New: autofs4 and mount -bind interact very
Subject: [Bugme-new] [Bug 4600] New: DAC960 driver does not update it's
Subject: [Bugme-new] [Bug 4622] New: System hang while running stress test
Subject: [Bugme-new] [Bug 4626] New: Saitek Cyborg 3D Rumble Force USB
Subject: [Bugme-new] [Bug 4635] New: Segfoult after changeing shmmax
Subject: [BUG] oops while completing async USB via usbdevio
Subject: Double free of initramfs
Subject: Error while reading /proc/acpi/battery/BAT1/state
Subject: firewire and/or sbp2 problem with rc2-mm3, but not rc2-mm2
Subject: Firewire not working in 2.6.11.8 kernel
Subject: Hang when using a Matrox G550 with DVI
Subject: http://lkml.org/lkml/2005/3/14/107
Subject: IDE problems in 2.6.12-rc1-bk1 onwards (was Re: 2.6.12-rc3-mm1)
Subject: intelfb crash on i845
Subject: kernel 2.6 libipq kernel hang
Subject: kernel oops with powernow-k8 on k8t neo-v
Subject: Mach64 framebuffer console distorted on PMac G3 with recent 2.6 kernels
Subject: md: bug in file drivers/md/md.c, line 1513
Subject: nforce 4 audio has no s/pdif out
Subject: Ooops: 0000 [#1] PIONEER DVD-RW DVR-K12RA
Subject: Oops in set_spdif_output in i810_audio
Subject: [PATCH] PCI: do VIA IRQ fixup always, not just in PIC mode (resend)
Subject: PowerNow-K8 and Winchester CPUs
Subject: PROBLEM: 2.6.11.4 vaio z1xmp mouse click
Subject: Problem with w6692 & kernel >=2.6.10
Subject: prompt_ramdisk=1 and load_ramdisk=1 doesn't work with 2.6.11 on floppy
Subject: Radeonfb blanks the screen / hangs the system with 2.6.11
Subject: Re:
Subject: Re: 2.6.11.4: ACPI, IRQ 11 disabled, Ethernet/USB stops working
Subject: Re: 2.6.11-mm1
Subject: Re: 2.6.11: USB broken on nforce4, ipv6 still broken, centrino
Subject: Re: 2.6.11: USB broken on nforce4, ipv6 still broken, centrino speedstep
Subject: Re: 2.6.11: USB broken on nforce4, ipv6 still broken, centrino speedstep even more broken than in 2.6.10
Subject: Re: 2.6.12-rc1-mm1: resume regression [update] (was:
Subject: Re: 2.6.12-rc1-mm1: resume regression [update] (was: Re:
Subject: Re: 2.6.12-rc1-mm1: resume regression [update] (was: Re: 2.6.12-rc1-mm1: Kernel BUG at pci:389)
Subject: Re: 2.6.12-rc1-mm1: resume regression [update] (was: Re:2.6.12-rc1-mm1: Kernel BUG at pci:389)
Subject: Re: 2.6.12-rc1-mm3: box hangs solid on resume from disk while resuming device drivers
Subject: Re: 2.6.12-rc2-mm1
Subject: Re: 2.6.12-rc2-mm2
Subject: Re: 2.6.12-rc3-mm1
Subject: Re: 2.6.12-rc4, -mm: bad ide-cs problems
Subject: Re: 2.6.12-rc5-mm1
Subject: Re: 2.6.12-rc5-mm1 breaks serio: i8042 AUX port
Subject: Re: 2.6.12-rc5-mm2
Subject: Re: 2.6.12-rcx networking oops
Subject: Re: [ACPI] Fw: [Bugme-new] [Bug 4496] New: Interrupt-problem
Subject: Re: [ACPI] Fw: [Bugme-new] [Bug 4496] New: Interrupt-problem depends on sound-playing: irq 10: nobody cared!
Subject: Re: [ACPI] Re: 2.6.12-rc1-mm4 and suspend2ram (and synaptics)
Subject: Re: Adaptec 2010S i2o + x86_64 doesn't work
Subject: Re: [Alsa-devel] Re: Oops in set_spdif_output in i810_audio
Subject: Re: amd64 2.6.11 oops on modprobe
Subject: Re: [BUG] 2.6.11- sym53c8xx Broken on pp64
Subject: Re: [Bug 4510] Something in USB (uhci_hcd?) stops/kills pwc driver, ps2-keyboard, serial-mouse
Subject: Re: [BUG] Lockup using ALi SATA controller (sata_uli)
Subject: RE: [Bugme-new] [Bug 4201] New: megaraid crashes at random with CERC ATA100/4ch (DELL Controller) on PowerEdge 600SC
Subject: Re: [Bugme-new] [Bug 4291] New: usb harddisk don' work, problem with the ehci_hcd module
Subject: Re: [Bugme-new] [Bug 4323] New: no cursor in console with intelfb
Subject: Re: CPUFREQ/speedstep on Intel 955X chipset based system
Subject: Re: Disk output lockup 2.6.12_rc2 2.6.11.7
Subject: Re: firewire and/or sbp2 problem with rc2-mm3, but not rc2-mm2
Subject: Re: Fw: [Bugme-new] [Bug 4487] New: isicom - impossible to load
Subject: Re: Fw: [Bugme-new] [Bug 4561] New: isapnp fails to find/init es18xx sound card
Subject: RE: Fw: [Bugme-new] [Bug 4628] New: Test server hang while running rhr (network) test
Subject: Re: Fw: [Bugme-new] [Bug 4628] New: Test server hang while running rhr (network) test on RHEL4 with kernel 2.6.12-rc1-mm4
Subject: Re: Fw: [Bugme-new] [Bug 4635] New: Segfoult after changeing shmmax
Subject: Re: Fw: NFS (ext3/VFS?) bug in 2.6.8/10
Subject: Re: Fw: Re: 2.6.11.4: ACPI, IRQ 11 disabled, Ethernet/USB stops working
Subject: Re: Hang when using a Matrox G550 with DVI
Subject: Re: IDE problems in 2.6.12-rc1-bk1 onwards (was Re: 2.6.12-rc3-mm1)
Subject: Re: kernel oops with powernow-k8 on k8t neo-v
Subject: Re: Linux 2.6.12-rc2
Subject: Re: [Linux-fbdev-devel] Fw: [Bugme-new] [Bug 4570] New: vesafb,
Subject: Re: [Linux-fbdev-devel] intelfb crash on i845
Subject: Re: [Linux-fbdev-devel] Re: USB mouse hiccups (was RFD: Kernel release numbering)
Subject: Re: [linux-pm] potential pitfall? changing configuration while PC in hibernate (fwd)
Subject: Re: [linux-usb-devel] Re: [linux-pm] potential pitfall? changing configuration while PC in hibernate (fwd)
Subject: Re: [linux-usb-devel] Re: Problems with connect/disconnect cycles
Subject: Re: Mach64 framebuffer console distorted on PMac G3 with recent
Subject: Re: mouse still losing sync and thus jumping around
Subject: Re: mouse still losing sync and thus jumping around (2.6.12-rc5)
Subject: Re: nforce 4 audio has no s/pdif out
Subject: Re: non-fatal oops with EIP at skb_release_data, available for debugging
Subject: Re: [PATCH 6/6]suspend/resume SMP support
Subject: Re: [PATCH]Fw: Major problem with PCMCIA/Yenta system
Subject: Re: [PATCH] Support for GEODE CPUs
Subject: Re: PCMCIA patch needed
Subject: Re: PNP parallel&serial ports: module reload fails (2.6.11)?
Subject: Re: PowerNow-K8 and Winchester CPUs
Subject: Re: PROBLEM: 2.6.11.4 vaio z1xmp mouse click
Subject: Re: PROBLEM: Radeon card displays incorrectly under the 2.6.11 version unless compiled with SMP support
Subject: Re: Re:
Subject: Re: swsusp not working for me on a PREEMPT 2.6.12-rc1 and 2.6.12-rc1-mm3 kernel
Subject: Re: Touchpad does not work anymore
Subject: Re: Unable to boot 2.6.12-rc2-mm1 with command line maxcpus=1
Subject: Re: USB PM resume data point
Subject: Re: VIA interrupt quirk for 2.6.12?
Subject: RE: VIA interrupt quirk for 2.6.12?
Subject: Re: waitid() fails with EINVAL for SA_RESTART signals
Subject: Re: What breaks aic7xxx in post 2.6.12-rc2 ?
Subject: SMbus not enabled
Subject: swsusp not working for me on a PREEMPT 2.6.12-rc1 and 2.6.12-rc1-mm3 kernel
Subject: Tridentfb troubles
Subject: Unable to boot 2.6.12-rc2-mm1 with command line maxcpus=1
Subject: USB mouse hiccups (was RFD: Kernel release numbering)
Subject: VIA interrupt quirk for 2.6.12?
Subject: waitid() fails with EINVAL for SA_RESTART signals
Subject: XFS and 2.6.12-rc5
Quoted 8 lines · Andrew Morton
Quoted 3 lines · Jeff Garzik
So... are we gonna see 2.6.12 sometime soon?
Current plan is -rc6 in a few days, 2.6.12 a week after that.
Cools.
Quoted 5 lines
My things-to-worry-about folder still has 244 entries. Nobody seems to care much. Poor me.
Lots of USB problems, quite a few input problems. fbdev, ACPI, ATAPI. All the usual suspects.
I've got a sata_sil oops fix coming.
Quoted 2 lines
Subject: 2.6.12-rcx networking oops
Subject: [BUG] Lockup using ALi SATA controller (sata_uli)
does this have a bug# associated?
Quoted 8 lines
Subject: [Bugme-new] [Bug 4297] New: VIA 82xxx sound problem with kernel
Subject: [Bugme-new] [Bug 4300] New: hpt366 S-ATA driver causes the kernel
Subject: [Bugme-new] [Bug 4368] New: b44 driver + udev: does not work if
Subject: [Bugme-new] [Bug 4374] New: bug in libata-core withsata_sil
Subject: [Bugme-new] [Bug 4380] New:via_velocity: receiver hang after
Subject: [Bugme-new] [Bug 4451] New: VIA Rhine II: media detection fails on
Subject: [Bugme-new] [Bug 4465] New: Problems with Intel ICH6-M Sonoma
Subject: [Bugme-new] [Bug 4551] New: pcnet32 don't follow module options
I'll take a look at these.
Bug 4551 doesn't sound terribly urgent.
Quoted 1 line
Subject: Ooops: 0000 [#1] PIONEER DVD-RW DVR-K12RA
libata or IDE?
Quoted 2 lines
Subject: Oops in
set_spdif_outputini810_audio
Subject: Re: What breaks aic7xxx in post 2.6.12-rc2 ?
I think this got sorted.
Quoted 1 line
Subject: VIA interrupt quirk for 2.6.12?
I thought this had gotten sorted too.
Jeff
Quoted 5 lines · Jeff Garzik
Quoted 3 lines · Andrew Morton
Quoted 1 line · Jeff Garzik
Quoted 7 lines
Quoted 5 lines
Quoted 2 lines
So... are we gonna see 2.6.12 sometime soon?
Current plan is -rc6 in a few days, 2.6.12 a week after that.
Cools.
hrm.
Quoted 9 lines
Quoted 6 lines
My things-to-worry-about folder still has 244 entries. Nobody seems to care much. Poor me.
Lots of USB problems, quite a few input problems. fbdev, ACPI, ATAPI. All the usual suspects.
I've got a
sata_siloops fix coming.
Cools.
Quoted 6 lines
Quoted 3 lines
Subject: 2.6.12-rcx networking oops
Subject: [BUG] Lockup using ALi SATA controller (sata_uli)does this have a bug# associated?
Nope. The simplest way to hunt these down is to stick the Subject into double quotes and google it.
Quoted 11 lines
Quoted 9 lines
Subject: [Bugme-new] [Bug 4297] New: VIA 82xxx sound problem with kernel
Subject: [Bugme-new] [Bug 4300] New: hpt366 S-ATA driver causes the kernel
Subject: [Bugme-new] [Bug 4368] New: b44 driver + udev: does not work if
Subject: [Bugme-new] [Bug 4374] New: bug in libata-core withsata_sil
Subject: [Bugme-new] [Bug 4380] New:via_velocity: receiver hang after
Subject: [Bugme-new] [Bug 4451] New: VIA Rhine II: media detection fails on
Subject: [Bugme-new] [Bug 4465] New: Problems with Intel ICH6-M Sonoma
Subject: [Bugme-new] [Bug 4551] New: pcnet32 don't follow module optionsI'll take a look at these.
Thanks.
Quoted 2 lines
Bug 4551 doesn't sound terribly urgent.
Yeah, I need to do another pass through all the bugzilla entries. Silly me didn't realise that when you ask a question on bugzilla and the originator replies, you don't get notified! You have to manually add yourself to Cc.
That being said, managing these via bugzilla is nicer than via email. We'll get something better going post-2.6.12.
Quoted 5 lines
Quoted 2 lines
Subject: Ooops: 0000 [#1] PIONEER DVD-RW DVR-K12RA
libata or IDE?
Quoted 5 lines
Quoted 3 lines
Subject: Oops in
set_spdif_outputini810_audio
Subject: Re: What breaks aic7xxx in post 2.6.12-rc2 ?I think this got sorted.
OK.
Quoted 4 lines
Quoted 1 line
Subject: VIA interrupt quirk for 2.6.12?
I thought this had gotten sorted too.
I think so too.
At Fri, 03 Jun 2005 19:55:37 -0400,
Quoted 2 lines · Jeff Garzik
Quoted 2 lines
Subject: [Bugme-new] [Bug 4297] New: VIA 82xxx sound problem with kernel
This should have been fixed already. (It was merged before rc2, so can't find in git repo...)
Takashi
Quoted 5 lines · Andrew Morton
Lots of USB problems, quite a few input problems. fbdev, ACPI, ATAPI. All the usual suspects.
Subject: intelfb crash on i845
Subject: Re: [Linux-fbdev-devel] intelfb crash on i845
These two entries seem to be the same one, from me. Sylvain Meyer was working on it. And I've recently seen some patches from him on the mm-commit list. I didn't have time to test them but I should be able to try next week (especially if a new -mm is released soon).
Brice
Quoted 5 lines · Brice Goglin
Quoted 3 lines · Andrew Morton
Lots of USB problems, quite a few input problems. fbdev, ACPI, ATAPI. All the usual suspects.
Quoted 9 lines
Quoted 2 lines
Subject: intelfb crash on i845
Subject: Re: [Linux-fbdev-devel] intelfb crash on i845These two entries seem to be the same one, from me. Sylvain Meyer was working on it. And I've recently seen some patches from him on the mm-commit list. I didn't have time to test them but I should be able to try next week (especially if a new -mm is released soon).
OK, thanks - I'll try to get mm3 out this evening, if by some miracle some of it compiles and boots ;)
Quoted 7 lines · Andrew Morton
Quoted 5 lines · Brice Goglin
Quoted 3 lines · Andrew Morton
Lots of USB problems, quite a few input problems. fbdev, ACPI, ATAPI. All the usual suspects.
Quoted 8 lines
Quoted 8 lines
Quoted 2 lines
Subject: intelfb crash on i845
Subject: Re: [Linux-fbdev-devel] intelfb crash on i845These two entries seem to be the same one, from me. Sylvain Meyer was working on it. And I've recently seen some patches from him on the mm-commit list. I didn't have time to test them but I should be able to try next week (especially if a new -mm is released soon).
Hi Andrew,
I just tried with rc6-mm1 and the problem is still present:
when the onboard video memory is set to 1MB in the BIOS, switching from X to VT1 gives a dirty framebuffer console (no text, just wrong colors). Setting memory to 8MB in the BIOS makes all this work.
Brice
Hi Brice,
What is your X configuration ? The default parameters are ok for a
VideoRam parameter up to 32MB. Could you check two things, please ?
- First, could you set VideoRam to 32MB in your X conf.
- Second, could you set it to 64MB and use a voffset=64 parameter
for intelfb.
Thanks
Sylvain
Quoted 41 lines · Brice Goglin
Quoted 19 lines · Andrew Morton
Quoted 15 lines · Brice Goglin
Quoted 7 lines · Andrew Morton
Lots of USB problems, quite a few input problems. fbdev, ACPI, ATAPI. All the usual suspects.
Subject: intelfb crash on i845
Subject: Re: [Linux-fbdev-devel] intelfb crash on i845These two entries seem to be the same one, from me. Sylvain Meyer was working on it. And I've recently seen some patches
Quoted 7 lines
Quoted 7 lines
from him on the mm-commit list. I didn't have time to test them but I
should be able to try next week (especially if a new -mm is released soon).
Hi Andrew,
I just tried with rc6-mm1 and the problem is still present:
when the onboard video memory is set to 1MB in the BIOS, switching from X to VT1 gives a dirty framebuffer console (no text, just wrong colors). Setting memory to 8MB in the BIOS makes all this work.Brice
Quoted 10 lines · Sylvain Meyer
Hi Brice,
What is your X configuration ? The default parameters are ok for a
VideoRam parameter up to 32MB. Could you check two things, please ?
- First, could you set VideoRam to 32MB in your X conf.
- Second, could you set it to 64MB and use a voffset=64 parameter for
intelfb.Thanks
Sylvain
"First" works.
"Second" doesn't:
intelfb says that the initial video mode is 640x400-8@69. This might be correct (I did not count :)).
But during the boot, the display of messages seems to be shifted upwards (the shift is about 3 or 4 text lines).
And switching from X to fbcon is still broken, but not as previously (dirty vertical lines without text). Now, the 3 bottom pixel lines of the last text line of the display ("host login:") are shown regularly everywhere on the screen.
Brice
Quoted 1 line · Andrew Morton
Subject: ATI Radeon 9000 M9 mobitility troubles on linux 2.6
Is that one still pending ? Or is it just the slow down due to the workaround ?
Quoted 1 line
Subject: [Bugme-new] [Bug 4453] New: Since 2.6.10 with radeon 9000 mobile
What is that one ?
Quoted 1 line
Subject: [Bugme-new] [Bug 4513] New: Radeon driver in 2.6.10 through
Ok, looks like I'll have to look at some bugzilla ? :)
Quoted 1 line
Subject: Radeonfb blanks the screen / hangs the system with 2.6.11
Can you forward me that one ?
Quoted 1 line
Subject: Re: PROBLEM: Radeon card displays incorrectly under the 2.6.11 version unless compiled with SMP support
And that one
Ben.
Quoted 7 lines · Benjamin Herrenschmidt
Quoted 1 line · Andrew Morton
Subject: ATI Radeon 9000 M9 mobitility troubles on linux 2.6
Is that one still pending ? Or is it just the slow down due to the workaround ?
The last I saw was http://lkml.org/lkml/2005/4/12/461
Quoted 7 lines
Quoted 1 line
Subject: [Bugme-new] [Bug 4453] New: Since 2.6.10 with radeon 9000 mobile
What is that one ?
Quoted 1 line
Subject: [Bugme-new] [Bug 4513] New: Radeon driver in 2.6.10 through
Ok, looks like I'll have to look at some bugzilla ? :)
yup.
Quoted 3 lines
Quoted 1 line
Subject: Radeonfb blanks the screen / hangs the system with 2.6.11
Can you forward me that one ?
http://lkml.org/lkml/2005/3/21/284
Again, the reporter seems to have gone to ground. They do that quite a lot.
Quoted 4 lines
Quoted 1 line
Subject: Re: PROBLEM: Radeon card displays incorrectly under the 2.6.11 version unless compiled with SMP support
And that one
http://seclists.org/lists/linux-kernel/2005/Mar/
The reporter vanished again.
Quoted 1 line · Andrew Morton
Subject: Double free of initramfs
Is there a patch to fix this? I've noticed a solid lockup when trying to umount initramfs after a pivot_root.
Signature · 1 line
Lab tests show that use of micro$oft causes cancer in lab animals
Quoted 6 lines · Wakko Warner
Quoted 1 line · Andrew Morton
Subject: Double free of initramfs
Is there a patch to fix this? I've noticed a solid lockup when trying to umount initramfs after a
pivot_root.
Nope, but there's a design:
Begin forwarded message:
Date: Wed, 16 Mar 2005 18:49:32 +0000
From: Ralf Baechle <[email protected]>
To: linux-arch@vger
Subject: Double free of initramfs
In all linker scripts we currently have something like this:
__init_begin = .;
...
. = ALIGN(4096);
__initramfs_start = .;
.init.ramfs : { *(.init.ramfs) }
__initramfs_end = .;
...
__init_end = .;
It seems all 25 linker scripts in the current bk tree are suffering from this. Which mean with CONFIG_BLK_DEV_INITRD enabled first free_initrd_mem may be called to free the initram disk and just a little later free_initmem will try to free the entire range again, so either the linker scripts would need fixing or free_initrd_mem has become obsolete.
Ralf
Quoted 6 lines · Andrew Morton
Quoted 4 lines · Jeff Garzik
So... are we gonna see 2.6.12 sometime soon?
Quoted 8 lines
Current plan is -rc6 in a few days, 2.6.12 a week after that.
My things-to-worry-about folder still has 244 entries. Nobody seems to care much. Poor me.
Lots of USB problems, quite a few input problems. fbdev, ACPI, ATAPI. All the usual suspects.
There's quite a few in there judging by the looks of the subjects that aren't worth holding up the release imo. Will the world end if we dont ship 2.6.12 with support for Geode optimisation for eg ?
Of the bugzillas...
Quoted 1 line
Subject: [Bug 2698] Kernel Crash; Could be related to quotas on ext3
sounds promising, but needs user confirmation.
Quoted 1 line
Subject: [Bug 3054] madvise doesn't fail for exceding RSS limit.
test program seems to dtrt for me on 2.6.12-rc5-git8
Quoted 2 lines
Subject: [Bug 4282] ALSA driver in Linux 2.6.11 causes a kernel panic when loading the EMU10K1 driver
Subject: [Bugme-new] [Bug 4282] New: ALSA driver in Linux 2.6.11 causes a
not reproducable by user, or alsa folks. hrmph.
Quoted 2 lines
Subject: [Bug 4342] "Near touchpad upper buttons" not working on a dell
Subject: [Bugme-new] [Bug 4342] New: "Near touchpad upper buttons" not
sounds like this got better, but still isnt perfect :(
Quoted 1 line
Subject: [Bug 4377] New: Severe memory leak issue
Hmm. yet more oom-killer woes.
Some kind person from IBM pulled out a patch that we stuck in RHEL4 which does a sysrq-M at the time an oom kill occurs, which we've found handy tracking down these. Might be worth including. It got sent to the list late last week. I can dig it out if you don't have it queued already.
Quoted 1 line
Subject: [Bug 4382] New: first joystick button mapped to extra number
needs work
Quoted 1 line
Subject: [Bug 4481] hang at boot from kernels 2.6.9 and above
*shrug*
Quoted 1 line
Subject: [Bug 4665] New: ACPI battery monitor does not work
"The problem is not present in 2.6.12-rc5-mm2"
Quoted 1 line
Subject: [Bug 4688] CD devices have their capacity set incorrectly, preventing
hmm, it'd be great if bugme.osdl.org had a 'needinfo' state.
Quoted 1 line
Subject: [Bugme-new] [Bug 4281] New: ALPS Touchpad Tap-to-Click Broken
seems fixed functionality wise, but needs some tuning.
Quoted 1 line
Subject: [Bugme-new] [Bug 4295] New: Garbage all over the screen when using
meh, fglrx tainted crap.
Quoted 1 line
Subject: [Bugme-new] [Bug 4297] New: VIA 82xxx sound problem with kernel
needinfo.
Quoted 1 line
Subject: [Bugme-new] [Bug 4299] New: glidepoint touchpad movement broken
user wont test until after 2.6.12 is released. catch22.
Quoted 1 line
Subject: [Bugme-new] [Bug 4300] New: hpt366 S-ATA driver causes the kernel
dupe of 2555
"hpt366.o driver hangs computer when probing htp374-based HighPoint Rocket 1540 SATA card" needinfo.
Quoted 1 line
Subject: [Bugme-new] [Bug 4306] New: USB no longer survives resume in 2.6.11
rc5 - "seems to work again"
Quoted 1 line
Subject: [Bugme-new] [Bug 4315] New: DMA timeouts on ASUS M2400N
needinfo
Quoted 1 line
Subject: [Bugme-new] [Bug 4318] New: fcntly system calls with options
REJECTED->INVALID
Quoted 1 line
Subject: [Bugme-new] [Bug 4323] New: no cursor in console with intelfb
no idea.
Quoted 1 line
Subject: [Bugme-new] [Bug 4340] New:
ohci_1394module breaks S3 suspend
firedire broken. film at 11.
I'm amazed it works when not suspended half the time.
Quoted 1 line
Subject: [Bugme-new] [Bug 4347] New: savavgfb ddc eeprom oops when "sensors"
"Yes Andrew, it is. The first bug is fixed since 2.6.11.7/2.6.12-rc1, the second
since 2.6.12-rc2."
Quoted 5 lines
Subject: [Bugme-new] [Bug 4352] New: Problems with PowerNow on Athlon-XP
Subject: [Bugme-new] [Bug 4392] New: powernow-k8 driver doesn't work with
Subject: PowerNow-K8 and Winchester CPUs
Subject: Re: kernel oops with powernow-k8 on k8t neo-v
Subject: Re: PowerNow-K8 and Winchester CPUs
should be fixed in -rc6 due to the cpufreq update a day or two ago.
Quoted 1 line
Subject: [Bugme-new] [Bug 4454] New: Mobile Intel Prescott with Enhanced
likely still present.
Quoted 3 lines
Subject: Re: VIA interrupt quirk for 2.6.12?
Subject: RE: VIA interrupt quirk for 2.6.12?
Subject: VIA interrupt quirk for 2.6.12?
didn't this get merged a few days ago ?
I would go through some of the rest on the list, but I'm hungry :-) Maybe more later..
Dave
Quoted 5 lines · Dave Jones
Quoted 1 line · Andrew Morton
Subject: [Bug 4382] New: first joystick button mapped to extra number
needs work
This one in Linus's tree already.
Signature · 1 line
Dmitry
Quoted 1 line · Andrew Morton
Subject: Bug in 8520.c - port.type not set for serial console
I think this is another case of someone reporting a problem and not providing any feedback to replies. Bjorn followed up on this and I haven't seen a response.
However, port.type won't be set for serial console. This is entirely expected. We haven't approached the normal port initialisation and as such we treat the port as being the lowest common denominator - a standard 8250 port.
If we do want port.type initialised, the solution for this is to get rid of the early initialisation of 8250-based consoles entirely, which is something I keep saying and not doing because I know I'm going to get whinged at.
Signature · 3 lines
Russell King Linux kernel 2.6 ARM Linux - http://www.arm.linux.org.uk/ maintainer of: 2.6 Serial core
Quoted 1 line · Andrew Morton
Subject: [Bugme-new] [Bug 4443] New: Unable to switch channels with DVB
I looked at that one, but there's no substantial information in the bug report (e.g. lspci and dmesg output, SysRq-T when xine hangs). IIRC there were no similar reports on the linux-dvb list.
Johannes
Quoted 9 lines · Andrew Morton
My things-to-worry-about folder still has 244 entries. Nobody seems to care much. Poor me.
Subject: 2.6.12-rc5-mm1 breaks serio: i8042 AUX port
Subject: Re: 2.6.12-rc5-mm1 breaks serio: i8042 AUX port
These are both from the same thread -- I reported the issue. I was having this problem in -mm1, and I'm intermittently having the problem in -mm2 ... I'm starting to think there may be another factor involved (I can't imagine what) ... But if I am the only person seeing this issue, then I wouldn't worry about this. I'll do more testing when -mm3 comes out and I'll post as to whether the problem is still present or not.
Signature · 1 line
Michael Krufky
--Andrew Morton <[email protected]> wrote (on Friday, June 03, 2005 16:38:43 -0700):
Quoted 6 lines
Quoted 4 lines · Jeff Garzik
So... are we gonna see 2.6.12 sometime soon?
Quoted 8 lines
Current plan is -rc6 in a few days, 2.6.12 a week after that.
My things-to-worry-about folder still has 244 entries. Nobody seems to care much. Poor me.
Lots of USB problems, quite a few input problems. fbdev, ACPI, ATAPI. All the usual suspects.
The one that worries me is that my x86_64 box won't boot since -rc3 See:
http://ftp.kernel.org/pub/linux/kernel/people/mbligh/abat/regression_matrix.html
Note large amount of red in left hand column. Backing out the fusion patches to the previous rev didn't fix it.
M.
--"Martin J. Bligh" <[email protected]> wrote (on Saturday, June 04, 2005 07:23:59 -0700):
Quoted 19 lines
--Andrew Morton <[email protected]> wrote (on Friday, June 03, 2005 16:38:43 -0700):
Quoted 6 lines
Quoted 4 lines · Jeff Garzik
So... are we gonna see 2.6.12 sometime soon?
Quoted 8 lines
Current plan is -rc6 in a few days, 2.6.12 a week after that.
My things-to-worry-about folder still has 244 entries. Nobody seems to care much. Poor me.
Lots of USB problems, quite a few input problems. fbdev, ACPI, ATAPI. All the usual suspects.
Quoted 7 lines
The one that worries me is that my
x86_64box won't boot since -rc3 See:http://ftp.kernel.org/pub/linux/kernel/people/mbligh/abat/regression_matrix.html
Note large amount of red in left hand column. Backing out the fusion patches to the previous rev didn't fix it.
Filed bug 4709 to track it.
M.
Hi,
Quoted 25 lines · Martin J. Bligh
--"Martin J. Bligh" <[email protected]> wrote (on Saturday, June 04, 2005 07:23:59 -0700):
Quoted 22 lines
--Andrew Morton <[email protected]> wrote (on Friday, June 03, 2005 16:38:43 -0700):
Quoted 6 lines
Quoted 4 lines · Jeff Garzik
So... are we gonna see 2.6.12 sometime soon?
Quoted 8 lines
Current plan is -rc6 in a few days, 2.6.12 a week after that.
My things-to-worry-about folder still has 244 entries. Nobody seems to care much. Poor me.
Lots of USB problems, quite a few input problems. fbdev, ACPI, ATAPI. All the usual suspects.
The one that worries me is that my
x86_64box won't boot since -rc3 See:
Quoted 6 lines
Quoted 4 lines
http://ftp.kernel.org/pub/linux/kernel/people/mbligh/abat/regression_matrix.html
Note large amount of red in left hand column. Backing out the fusion patches to the previous rev didn't fix it.
Filed bug 4709 to track it.
Well, I have a dual-Opteron box with tg3 (AMD chipset) and -rc5+ run happily on it. Please let me know if I can help somehow.
Greets,
Rafael
Signature · 3 lines
- Would you tell me, please, which way I ought to go from here? - That depends a good deal on where you want to get to. -- Lewis Carroll "Alice's Adventures in Wonderland"
Quoted 5 lines · Martin J. Bligh
The one that worries me is that my
x86_64box won't boot since -rc3
See:http://ftp.kernel.org/pub/linux/kernel/people/mbligh/abat/regression_matrix.html
All the MPT_FUSION config variables got renamed, so a simple `make oldconfig' results in a kernel qhich does precisely what your machine is doing there.
--Andrew Morton <[email protected]> wrote (on Saturday, June 04, 2005 15:11:20 -0700):
Quoted 10 lines
Quoted 5 lines · Martin J. Bligh
The one that worries me is that my
x86_64box won't boot since -rc3
See:http://ftp.kernel.org/pub/linux/kernel/people/mbligh/abat/regression_matrix.html
All the
MPT_FUSIONconfig variables got renamed, so a simple `make oldconfig' results in a kernel qhich does precisely what your machine is doing there.
Not sure what you mean. 2.6.11 has (in drivers/message/fusion/Kconfig)
config FUSION
config FUSION_MAX_SGE
config FUSION_CTL
config FUSION_LAN
2.6.12-rc3 has:
config FUSION
config FUSION_MAX_SGE
config FUSION_CTL
config FUSION_LAN
So I don't think they changed, AFAICS. The config in question has:
CONFIG_FUSION=yCONFIG_FUSION_MAX_SGE=40
# CONFIG_FUSION_CTL is not set
# CONFIG_SOUND_FUSION is not set
And I'd backed out the rc3 drivers to rc2 (the whole of drivers/message/fusion) and it doesn't fix it.
I also get several different failure modes, in different trees, one of which is:
^M^@Testing NMI watchdog ... <3>BUG: soft lockup detected on CPU#3! ^M
^M^@Modules linked in:
^M^@Pid: 1, comm: swapper Not tainted 2.6.12-rc2-mm2-autokern1 ^M^@RIP: 0010:[<ffffffff80254eda>] <ffffffff80254eda>{__delay+10} ^M^@RSP: 0000:ffff8100e3f23f00 EFLAGS: 00000216
^M^@RAX: 00000000001b144e RBX: ffffffff801af3d7 RCX: 000000007c1f2aa5 ^M^@RDX: 000000000000006b RSI: 0000000000000008 RDI: 00000000001b4c48 ^M^@RBP: 0000ffffffff8010 R08: 0000000000000720 R09: ffff8100e3f543e8 ^M^@R10: 00000000001d92d4 R11: ffffffff8025aa40 R12: ffff8100e3f543e8 ^M^@R13: 0000000000000000 R14: 0000000000000000 R15: 0000000000000002 ^M^@FS: 0000000000000000(0000) GS:ffffffff804dfe00(0000) knlGS:0000000000000000 ^M^@CS: 0010 DS: 0018 ES: 0018 CR0: 000000008005003b
^M^@CR2: 0000000000000000 CR3: 0000000000101000 CR4: 00000000000006e0 ^M
^M^@Call Trace:<ffffffff804f3b15>{check_nmi_watchdog+181} <ffffffff8010c249>{ini t+505}
^M^@ <ffffffff8010f3ff>{child_rip+8} <ffffffff8010c050>{init+0}
^M^@ <ffffffff8010f3f7>{child_rip+0}
^M^@CPU#0: NMI appears to be stuck (24)!
Quoted 8 lines
--Andrew Morton <[email protected]> wrote (on Saturday, June 04, 2005 15:11:20 -0700):
Quoted 6 lines
Quoted 5 lines · Martin J. Bligh
The one that worries me is that my
x86_64box won't boot since -rc3
See:http://ftp.kernel.org/pub/linux/kernel/people/mbligh/abat/regression_matrix.html
HA. Found it. binary search reveals it's patch 182 out of 2.6.12-rc2-mm2. And the winner is .... <drum roll please> ....
x86_64-use-the-e820-hole-to-map-the-iommu-agp-aperture.patch
me no likey! ;-)
M.
Quoted 8 lines · Martin J. Bligh
Quoted 8 lines
--Andrew Morton <[email protected]> wrote (on Saturday, June 04, 2005 15:11:20 -0700):
Quoted 5 lines
Quoted 4 lines · Martin J. Bligh
The one that worries me is that my
x86_64box won't boot since -rc3
See:
Quoted 7 lines
Quoted 1 line
Quoted 1 line
HA. Found it. binary search reveals it's patch 182 out of 2.6.12-rc2-mm2. And the winner is .... <drum roll please> ....
x86_64-use-the-e820-hole-to-map-the-iommu-agp-aperture.patch
hrm. No useful messages in dmesg?
Andi, do we revert it?
Quoted 14 lines · Andrew Morton
Quoted 13 lines · Martin J. Bligh
Quoted 9 lines
--Andrew Morton <[email protected]> wrote (on Saturday, June 04, 2005 15:11:20 -0700):
Quoted 6 lines
Quoted 5 lines · Martin J. Bligh
The one that worries me is that my
x86_64box won't boot since -rc3
See:http://ftp.kernel.org/pub/linux/kernel/people/mbligh/abat/regression_matrix.html
HA. Found it. binary search reveals it's patch 182 out of 2.6.12-rc2-mm2. And the winner is .... <drum roll please> ....
Quoted 6 lines
Quoted 2 lines
x86_64-use-the-e820-hole-to-map-the-iommu-agp-aperture.patch
hrm. No useful messages in dmesg?
Andi, do we revert it?
Ok. For now.
Actually it fixes some other bugs (e.g. one from Matt D.), but they are not very high priority.
I would like to debug it, but I am not sure I will still make it this week. But Martin, can you please send me the dmesg again? Maybe it is something stupid.
-Andi
--Andi Kleen <[email protected]> wrote (on Wednesday, June 08, 2005 14:56:37 +0200):
Quoted 26 lines · Andrew Morton
Quoted 14 lines
Quoted 13 lines · Martin J. Bligh
Quoted 9 lines
--Andrew Morton <[email protected]> wrote (on Saturday, June 04, 2005 15:11:20 -0700):
Quoted 6 lines
Quoted 5 lines · Martin J. Bligh
The one that worries me is that my
x86_64box won't boot since -rc3
See:http://ftp.kernel.org/pub/linux/kernel/people/mbligh/abat/regression_matrix.html
HA. Found it. binary search reveals it's patch 182 out of 2.6.12-rc2-mm2. And the winner is .... <drum roll please> ....
Quoted 6 lines
Quoted 2 lines
x86_64-use-the-e820-hole-to-map-the-iommu-agp-aperture.patch
hrm. No useful messages in dmesg?
Andi, do we revert it?
Ok. For now.
Quoted 6 lines
Actually it fixes some other bugs (e.g. one from Matt D.), but they are not very high priority.
I would like to debug it, but I am not sure I will still make it this week. But Martin, can you please send me the dmesg again? Maybe it is something stupid.
All the logs are linked off here:
http://ftp.kernel.org/pub/linux/kernel/people/mbligh/abat/regression_matrix.html
Just click on the ABORT messages in hte left column. But I'm thinking maybe I'm off by one, and it might be:
x86_64-port-over-e820-gap-detection-from-i386.patch
I'm double checking right now. Even once it's we get back to a point where it boots, it seems to consistently hang every time in the same place, which seems to be caused, AFAICS by
x86_64-use-a-common-function-to-find-code-segment-bases-fix.patch
I'll double check that too before anyone shoots it ... gimme a few hours.
M.
Quoted 24 lines
Quoted 15 lines
Quoted 8 lines
Quoted 8 lines
Quoted 4 lines
Quoted 4 lines
Quoted 4 lines
The one that worries me is that my
x86_64box won't boot since -rc3
See:http://ftp.kernel.org/pub/linux/kernel/people/mbligh/abat/regression_matrix.html
HA. Found it. binary search reveals it's patch 182 out of 2.6.12-rc2-mm2. And the winner is .... <drum roll please> ....
Quoted 6 lines
Quoted 2 lines
x86_64-use-the-e820-hole-to-map-the-iommu-agp-aperture.patch
hrm. No useful messages in dmesg?
Andi, do we revert it?
Quoted 8 lines
Ok. For now.
Actually it fixes some other bugs (e.g. one from Matt D.), but they are not very high priority.
I would like to debug it, but I am not sure I will still make it this week. But Martin, can you please send me the dmesg again? Maybe it is something stupid.
Quoted 6 lines
All the logs are linked off here:
http://ftp.kernel.org/pub/linux/kernel/people/mbligh/abat/regression_matrix.html
Just click on the ABORT messages in hte left column. But I'm thinking maybe I'm off by one, and it might be:
Nope, I was correct, just one of my scrawled notes was wrong. backing out
x86_64-use-the-e820-hole-to-map-the-iommu-agp-aperture.patch
does indeed fix it.
M.
--"Martin J. Bligh" <[email protected]> wrote (on Wednesday, June 08, 2005 16:04:57 -0700):
Quoted 26 lines
Quoted 26 lines
Quoted 15 lines
Quoted 8 lines
Quoted 8 lines
Quoted 4 lines
Quoted 4 lines
Quoted 4 lines
The one that worries me is that my
x86_64box won't boot since -rc3
See:http://ftp.kernel.org/pub/linux/kernel/people/mbligh/abat/regression_matrix.html
HA. Found it. binary search reveals it's patch 182 out of 2.6.12-rc2-mm2. And the winner is .... <drum roll please> ....
Quoted 6 lines
Quoted 2 lines
x86_64-use-the-e820-hole-to-map-the-iommu-agp-aperture.patch
hrm. No useful messages in dmesg?
Andi, do we revert it?
Quoted 8 lines
Ok. For now.
Actually it fixes some other bugs (e.g. one from Matt D.), but they are not very high priority.
I would like to debug it, but I am not sure I will still make it this week. But Martin, can you please send me the dmesg again? Maybe it is something stupid.
All the logs are linked off here:
Quoted 8 lines
Quoted 4 lines
http://ftp.kernel.org/pub/linux/kernel/people/mbligh/abat/regression_matrix.html
Just click on the ABORT messages in hte left column. But I'm thinking maybe I'm off by one, and it might be:
Nope, I was correct, just one of my scrawled notes was wrong. backing out
x86_64-use-the-e820-hole-to-map-the-iommu-agp-aperture.patch
OK, here's the patch to fix the boot problem, for reference (just the above reversed).
http://mbligh.org/abat/no_hole
Now what's REALLY, REALLY wierd is that this fixes my hang problem whilst trying to run kernbench:
http://mbligh.org/abat/no_hang
which is just reverting:
x86_64-use-a-common-function-to-find-code-segment-bases-fix.patch
But the patch is tiny, and it makes NO sense at all for this to fix anything. All it does is:
include/asm-x86_64/ptrace.h +0 -2
@@ -86,8 +86,6 @@ struct pt_regs {extern unsigned long profile_pc (struct pt_regs *regs);void signal_fault (struct pt_regs *regs,void __user *frame,char *where); -struct task_struct ; -extern unsigned long convert_rip_to_linear (struct task_struct *child,struct pt_regs *regs);
How the hell can that possibly fix it? Boggle. But it does. I checked. I ran a whole damned sequence of patches from your tree against the box, then extracted the one where the failover started and retested it with just that and the no_hole one. There's even a little green box to prove it about 4 down on the left here:
http://ftp.kernel.org/pub/linux/kernel/people/mbligh/abat/regression_matrix.html
My brain is now a small piece of silly-putty smushed against the far wall of my study. Anything you can do to help me scrape up the remains would be splendid. I can only speculate it's some wierd side-effect, because I have no other explaination at all.
Humpf.
M.
Quoted 11 lines
Now what's REALLY, REALLY wierd is that this fixes my hang problem whilst trying to run kernbench:
http://mbligh.org/abat/no_hang
which is just reverting:
x86_64-use-a-common-function-to-find-code-segment-bases-fix.patch
But the patch is tiny, and it makes NO sense at all for this to fix anything. All it does is:
Strangely, -git3 works, which has the boot fix applied, but not the hang fix bit. Something odd is afoot.
Quoted 29 lines
diff -purN -X
/home/mbligh/.diff.exclude2.6.12-rc2-mm2/include/asm-x86_64/ptrace.h2.6.12-rc2-mm2-no_hang/include/asm-x86_64/ptrace.hinclude/asm-x86_64/ptrace.h +0
-2@@ -86,8 +86,6 @@ struct pt_regs {extern unsigned long profile_pc (struct pt_regs *regs);void signal_fault (struct pt_regs *regs,void __user *frame,char *where); -struct task_struct ; -extern unsigned long convert_rip_to_linear (struct task_struct *child,struct pt_regs *regs);How the hell can that possibly fix it? Boggle. But it does. I checked. I ran a whole damned sequence of patches from your tree against the box, then extracted the one where the failover started and retested it with just that and the
no_holeone. There's even a little green box to prove it about 4 down on the left here:http://ftp.kernel.org/pub/linux/kernel/people/mbligh/abat/regression_matrix.html
My brain is now a small piece of silly-putty smushed against the far wall of my study. Anything you can do to help me scrape up the remains would be splendid. I can only speculate it's some wierd side-effect, because I have no other explaination at all.
Humpf.
M.
Quoted 28 lines · Martin J. Bligh
Quoted 28 lines
Quoted 15 lines
Quoted 8 lines
Quoted 8 lines
Quoted 4 lines
Quoted 4 lines
Quoted 4 lines
The one that worries me is that my
x86_64box won't boot since -rc3
See:http://ftp.kernel.org/pub/linux/kernel/people/mbligh/abat/regression_matrix.html
HA. Found it. binary search reveals it's patch 182 out of 2.6.12-rc2-mm2. And the winner is .... <drum roll please> ....
Quoted 6 lines
Quoted 2 lines
x86_64-use-the-e820-hole-to-map-the-iommu-agp-aperture.patch
hrm. No useful messages in dmesg?
Andi, do we revert it?
Quoted 8 lines
Ok. For now.
Actually it fixes some other bugs (e.g. one from Matt D.), but they are not very high priority.
I would like to debug it, but I am not sure I will still make it this week. But Martin, can you please send me the dmesg again? Maybe it is something stupid.
All the logs are linked off here:
http://ftp.kernel.org/pub/linux/kernel/people/mbligh/abat/regression_matrix.html
Quoted 8 lines
Quoted 2 lines
Just click on the ABORT messages in hte left column. But I'm thinking maybe I'm off by one, and it might be:
Nope, I was correct, just one of my scrawled notes was wrong. backing out
x86_64-use-the-e820-hole-to-map-the-iommu-agp-aperture.patch
does indeed fix it.
Most likely it is a BIOS bug and the Newisys BIOS puts something in the hole when it should be marked RESERVED in e820. Little we can do here :/
Note in theory it could blow up on i386 too if you have enough mappings.
-Andi
Quoted 9 lines · Andrew Morton
Quoted 4 lines · Jeff Garzik
So... are we gonna see 2.6.12 sometime soon?
Current plan is -rc6 in a few days, 2.6.12 a week after that.
Quoted 8 lines
My things-to-worry-about folder still has 244 entries. Nobody seems to care much. Poor me.
Lots of USB problems, quite a few input problems. fbdev, ACPI, ATAPI. All the usual suspects.
Subject: Re: Fw: [Bugme-new] [Bug 4561] New: isapnp fails to find/init es18xx sound card
This is more of a feature request than a bug, as in we don't currently have a PnPBIOS driver for this hardware. I need to look at the es18xx code to see how difficult it will be.
Quoted 1 line
Subject: Re: PNP parallel&serial ports: module reload fails (2.6.11)?
I'm looking into this issue now.
Quoted 1 line
Subject: Re: [linux-pm] potential pitfall? changing configuration while PC in hibernate (fwd)
I think we're gradually improving this. Suspend-to-ram is also an issue.
Thanks,
Adam
Jeff Garzik <[email protected]> :
[...]
Quoted 1 line
So... are we gonna see 2.6.12 sometime soon?
Any chance the r8169 queue could be merged in mainline before ?
--
Ueimor
Quoted 7 lines · Francois Romieu
Jeff Garzik <[email protected]> :
[...]Quoted 1 line
So... are we gonna see 2.6.12 sometime soon?
Any chance the r8169 queue could be merged in mainline before ?
I'll push the length check. Everything else is a new feature.
Jeff
Jeff Garzik <[email protected]> :
[...]
Quoted 3 lines
Quoted 1 line
Any chance the r8169 queue could be merged in mainline before ?
I'll push the length check.
Cool.
Quoted 1 line
Everything else is a new feature.
Hmmmm... Ok, let's have some r8169 handwaving/advocacy/explanation to tell what is going on.
- From a usability viewpoint, the PCI ID for the USRobotics adapter should be included. It has been reported around 10/04/2005. Consider the usual july/LKS/conf period and it will not be available in a stable serie before september (it is not a bugfix, it will not be in 2.6.12.x either). USR has cut the price: it will have some effect.
- The new features are not really new:
o 03/2005 for Stephen Hemminger's stats + other changes
-> it does not collide with existing functions.
o 03/2005 for the message level support
-> not new but it will be noticed, yes.- Some of the usual suspects on netdev know the code and even if your favorite r8169 maintainer has a real day job like everyone, I usually manage to dig the issues when something hits the fan (no engagement in sight, it helps :o) ).
Of course, you are free to ignore these points if you already took them into consideration.
--
Ueimor
Quoted 30 lines · Francois Romieu
Jeff Garzik <[email protected]> :
[...]Quoted 3 lines
Quoted 1 line
Any chance the r8169 queue could be merged in mainline before ?
I'll push the length check.
Cool.
Quoted 1 line
Everything else is a new feature.
Hmmmm... Ok, let's have some r8169 handwaving/advocacy/explanation to tell what is going on.
- From a usability viewpoint, the PCI ID for the USRobotics adapter should be included. It has been reported around 10/04/2005. Consider the usual july/LKS/conf period and it will not be available in a stable serie before september (it is not a bugfix, it will not be in 2.6.12.x either). USR has cut the price: it will have some effect.
- The new features are not really new:
o 03/2005 for Stephen Hemminger's stats + other changes-> it does not collide with existing functions. o 03/2005 for the message level support -> not new but it will be noticed, yes.
Quoted 7 lines
- Some of the usual suspects on netdev know the code and even if your favorite r8169 maintainer has a real day job like everyone, I usually manage to dig the issues when something hits the fan (no engagement in sight, it helps :o) ).
Of course, you are free to ignore these points if you already took them into consideration.
For Release Candidate I really want to keep things down to absolutely-required bug fixes, as 2.6.12 is apparently a week or so away. Standard pragmatism: anything else just introduces new possiblities for new bugs, and increases the time required to review each Release Candidate.
Jeff