mtrr question
Hello everybody,
Dumb question here.
I have an Athlon-thunderbird (1.2Ghz) on kernel 2.4.31 with mttr configured and a nVidia Geforce4. /proc/mtrr is empty.
Does/is setting up mtrr per the old 1999 Docs/mtrr.txt still relevant nowadays? I can't seem to find a definitive answer using Google.
TIA,
Nick
Signature · 2 lines
"When you're chewing on life's gristle, Don't grumble, Give a whistle..."
Quoted 6 lines · Nick Warne
Hello everybody,
Dumb question here.
I have an Athlon-thunderbird (1.2Ghz) on kernel 2.4.31 with mttr configured and a nVidia Geforce4.
/proc/mtrris empty.
That's odd. you should at least have write-back entries for your system memory. (Usually set up by the system BIOS)
Quoted 2 lines
Does/is setting up mtrr per the old 1999
Docs/mtrr.txtstill relevant nowadays? I can't seem to find a definitive answer using Google.
Yes, though the X driver should set them up itself on startup.
Dave
Quoted 7 lines · Dave Jones
That's odd. you should at least have write-back entries for your system memory. (Usually set up by the system BIOS)
Quoted 2 lines
Does/is setting up mtrr per the old 1999
Docs/mtrr.txtstill relevant nowadays? I can't seem to find a definitive answer using Google.Yes, though the X driver should set them up itself on startup.
Yes, I read that, and did wonder...
Ummm. I see from boot logs that mtrr isn't detected like it is on my other (Dell) boxes.
This looks like my BIOS settings are wonky then. What would it be 'called' to enable/disable mtrr on an AGP slot?
Thanks,
Nick
Signature · 2 lines
"When you're chewing on life's gristle, Don't grumble, Give a whistle..."
Quoted 2 lines · Nick Warne
Ummm. I see from boot logs that mtrr isn't detected like it is on my other (Dell) boxes.
Hmm, that sounds like it isn't compiled in. Though that doesn't make sense why you still have a /proc/mtrr
Quoted 2 lines
This looks like my BIOS settings are wonky then. What would it be 'called' to enable/disable mtrr on an AGP slot?
Its typically not a setting, just something the BIOS does as part of its CPU initialisation. I've never encountered a BIOS that had it configurable.
Dave
Quoted 6 lines · Dave Jones
Quoted 2 lines · Nick Warne
Ummm. I see from boot logs that mtrr isn't detected like it is on my other (Dell) boxes.
Hmm, that sounds like it isn't compiled in. Though that doesn't make sense why you still have a
/proc/mtrr
OK, ignore my previous comment (too many Linux boxes here). The one I am investigating is my main Desktop, and dmesg confirms. mtrr is detected as 'Intel' which is right as per the Docs (even though I have an AMD).
I also forgot to say I use the nVidia agp module (works better for me in Quake2 for some reason)... but searching their docs doesn't even mention mtrr.
Could it be that? If so, I am wasting you guys time.
Thanks,
Nick
Signature · 2 lines
"When you're chewing on life's gristle, Don't grumble, Give a whistle..."
Quoted 12 lines · Nick Warne
Quoted 6 lines · Dave Jones
Quoted 2 lines · Nick Warne
Ummm. I see from boot logs that mtrr isn't detected like it is on my other (Dell) boxes.
Hmm, that sounds like it isn't compiled in. Though that doesn't make sense why you still have a
/proc/mtrrOK, ignore my previous comment (too many Linux boxes here). The one I am investigating is my main Desktop, and dmesg confirms. mtrr is detected as 'Intel' which is right as per the Docs (even though I have an AMD).
Quoted 5 lines
I also forgot to say I use the nVidia agp module (works better for me in Quake2 for some reason)... but searching their docs doesn't even mention mtrr.
Could it be that? If so, I am wasting you guys time.
Maybe. I don't use non-free drivers, so I have no idea what nvidia are/aren't doing in their driver.
I'd suggest trying the nvidia forums.
Dave
Quoted 4 lines · Dave Jones
Maybe. I don't use non-free drivers, so I have no idea what nvidia are/aren't doing in their driver.
I'd suggest trying the nvidia forums.
No need ;-). You helped me pinpoint it... I went for it and ran manually:
bash-2.05b# echo "base=0xD0000000 size=0x4000000 type=write-combining"
Quoted 1 line
|
/proc/mtrr
bash-2.05b# cat /proc/mtrr
reg00: base=0x00000000 ( 0MB), size=1024MB: write-back, count=1
reg01: base=0x40000000 (1024MB), size= 256MB: write-back, count=1
reg02: base=0xd0000000 (3328MB), size= 64MB: write-combining, count=1
reg05: base=0xc0000000 (3072MB), size= 256MB: write-combining, count=1
Thanks for help Dave... very much appreciated. I will look back and use Linux kernel module next build - I want things be nice and free too.
Nick
Signature · 2 lines
"When you're chewing on life's gristle, Don't grumble, Give a whistle..."
Quoted 8 lines · Dave Jones
Quoted 5 lines
I also forgot to say I use the nVidia agp module (works better for me in Quake2 for some reason)... but searching their docs doesn't even mention mtrr.
Could it be that? If so, I am wasting you guys time.
Maybe. I don't use non-free drivers, so I have no idea what nvidia are/aren't doing in their driver.
This is confirmed it is a nvidia thing. Tonight I have just upgraded (updated?) from 2.4.31 to 2.6.11.12 kernel (whooo), and used agpart - I now have /proc/mtrr values as expected from boot.
Quake2 works great too :-)
Nick
Signature · 2 lines
"When you're chewing on life's gristle, Don't grumble, Give a whistle..."