ppc32: remove orphaned ppc4xx_kgdb.c
PATCH 1/1 ppc32: remove orphaned ppc4xx_kgdb.c
Removes ppc4xx_kgdb.c which is no longer being used. Pointed out by Andrei Konovalov.
Signed-off-by Matt Porter <[email protected]>
arch/ppc/syslib/ppc4xx_kgdb.c deleted +0 -124
@@ -1,124 +0,0 @@ -#include <linux/config.h> -#include <linux/types.h> -#include <asm/ibm4xx.h> -#include <linux/kernel.h> - - - -#define LSR_DR 0x01/* Data ready */ -#define LSR_OE 0x02/* Overrun */ -#define LSR_PE 0x04/* Parity error */ -#define LSR_FE 0x08/* Framing error */ -#define LSR_BI 0x10/* Break */ -#define LSR_THRE 0x20/* Xmit holding register empty */ -#define LSR_TEMT 0x40/* Xmitter empty */ -#define LSR_ERR 0x80/* Error */ - -#include <platforms/4xx/ibm_ocp.h> - -extern struct NS16550 *COM_PORTS []; -#ifndef NULL -#define NULL 0x00 -#endif - -static volatile struct NS16550 *kgdb_debugport =NULL ; - -volatile struct NS16550 * -NS16550_init (int chan) -{ -volatile struct NS16550 *com_port; -int quot; -#ifdef BASE_BAUD - quot =BASE_BAUD /9600 ; -#else - quot =0x000c ;/* 0xc = 9600 baud (on a pc) */ -#endif - - com_port = (struct NS16550 *)COM_PORTS [chan]; - - com_port->lcr =0x00 ; - com_port->ier =0xFF ; - com_port->ier =0x00 ; - com_port->lcr = com_port->lcr |0x80 ;/* Access baud rate */ - com_port->dll = ( quot &0x00ff );/* 0xc = 9600 baud */ - com_port->dlm = ( quot &0xff00 ) >>8 ; - com_port->lcr =0x03 ;/* 8 data, 1 stop, no parity */ - com_port->mcr =0x00 ;/* RTS/DTR */ - com_port->fcr =0x07 ;/* Clear & enable FIFOs */ - -return ( com_port ); -} - - -void -NS16550_putc (volatile struct NS16550 *com_port,unsigned char c) -{ -while ((com_port->lsr &LSR_THRE ) ==0 ) - ; - com_port->thr = c; -return ; -} - -unsigned char -NS16550_getc (volatile struct NS16550 *com_port) -{ -while ((com_port->lsr &LSR_DR ) ==0 ) - ; -return (com_port->rbr); -} - -unsigned char -NS16550_tstc (volatile struct NS16550 *com_port) -{ -return ((com_port->lsr &LSR_DR ) !=0 ); -} - - -#if defined(CONFIG_KGDB_TTYS0 ) -#define KGDB_PORT 0 -#elif defined(CONFIG_KGDB_TTYS1 ) -#define KGDB_PORT 1 -#elif defined(CONFIG_KGDB_TTYS2 ) -#define KGDB_PORT 2 -#elif defined(CONFIG_KGDB_TTYS3 ) -#define KGDB_PORT 3 -#else -#error "invalid kgdb_tty port" -#endif - -void putDebugChar (unsigned char c ) -{ -if ( kgdb_debugport ==NULL ) - kgdb_debugport =NS16550_init (KGDB_PORT ); -NS16550_putc ( kgdb_debugport, c ); -} - -int getDebugChar (void ) -{ -if (kgdb_debugport ==NULL ) - kgdb_debugport =NS16550_init (KGDB_PORT ); - -return (NS16550_getc (kgdb_debugport)); -} - -void kgdb_interruptible (int enable) -{ -return ; -} - -void putDebugString (char * str) -{ -while (*str !='\0' ) { -putDebugChar (*str); - str++; - } -putDebugChar ('\r' ); -return ; -} - -void -kgdb_map_scc (void ) -{ -printk ("kgdb init \n" ); - kgdb_debugport =NS16550_init (KGDB_PORT ); -}