problem with ip route and multiple lans
Hi, I have a little problem to setup iproute in my network It looks like this:
---- ----- ------
R1 R2 R3
---- ----- ------
| | |
| | | -------------------------------
ETH1 ETH2 ETH3
ETH0 ETH4 -------------> DMZ
------------------------------
|
|
|
--------------
Internal Router
--------------
LAN1 LAN2 LAN3I've add 3 records to rt_tables file T1, T2 and T3, and wrote scritp:
##
--------------------------------
#1ISP
P1_NET1="83.16.76.112"
ETH1="eth1"
IP1="83.16.76.114"
R1="83.16.76.113"
#2ISP
P2_NET2="80.55.42.32"
ETH2="eth2"
IP2="80.55.42.34"
R2="80.55.42.33"
#3ISP
P3_NET3!2.160.117.112
ETH3="eth3"
IP3="212.160.117.114"
R3="212.160.177.113"
#INTERNAL LAN
P0_NET="192.168.100.0"
ETH0="eth0"
IP0="192.168.100.1
#DMZ
P4_NET="10.1.1.0"
ETH4="eth4"
IP4="10.1.1.1"
ip route add $P1_NET1 dev $ETH1 src $R1 table T1
ip route add default via $IP1 table T1
ip route add $P2_NET2 dev $ETH2 src $R2 table T2
ip route add default via $IP2 table T2
ip route add $P3_NET dev $ETH3 src $R3 table T3
ip route add default via $R3 table T3
ip route add $P1_NET1 dev $ETH1 src $IP1
ip route add $P2_NET2 dev $ETH2 src $IP2
ip route add $P3_NET3 dev $ETH3 src $IP3
ip rule add from $IP1 table T1
ip rule add from $IP2 table T2
ip rule add from $IP3 table T3
ip route add default scope global nexthop via $R1 dev $ETH1 weight 1 \
nexthop via $R2 dev $ETH2 weight 1 \
nexthop via $R3 dev $ETH3 weight 1
---------------------------------------------
Using this script i have conection from my NAT to the all ISPs, but not to LANs. I know that this script have a lack of routing to my LANs
but i have no idea, how build that routing using iproute.
In present configuration i use route command/sbin/route add -net 192.168.10.0 netmask 255.255.255.0 gw 192.168.100.2 dev eth0 /sbin/route add -net 192.168.20.0 netmask 255.255.255.0 gw 192.168.100.2 dev eth0 /sbin/route add -net 192.168.30.0 netmask 255.255.255.0 gw 192.168.100.2 dev eth0 but this doesnt work with iprote command.
Thanks for any answer.
----------------------------------------------------------------------
Znajdz swoja milosc na wiosne... >>> http://link.interia.pl/f187a
_______________________________________________
LARTC mailing list
[email protected]
http://mailman.ds9a.nl/cgi-bin/mailman/listinfo/lartc
Quoted 86 lines · Pawel
Hi, I have a little problem to setup iproute in my network It looks like this:
---- ----- ------ R1 R2 R3 ---- ----- ------ | | | | | |-------------------------------
ETH1 ETH2 ETH3ETH0 ETH4 -------------> DMZ
------------------------------| | | -------------- Internal Router -------------- LAN1 LAN2 LAN3I've add 3 records to
rt_tablesfile T1, T2 and T3, and wrote scritp:##
--------------------------------
#1ISP
P1_NET1="83.16.76.112"
ETH1="eth1"
IP1="83.16.76.114"
R1="83.16.76.113"#2ISP
P2_NET2="80.55.42.32"
ETH2="eth2"
IP2="80.55.42.34"
R2="80.55.42.33"#3ISP
P3_NET3!2.160.117.112
ETH3="eth3"
IP3="212.160.117.114"
R3="212.160.177.113"#INTERNAL LAN
P0_NET="192.168.100.0"
ETH0="eth0"
IP0="192.168.100.1#DMZ
P4_NET="10.1.1.0"
ETH4="eth4"
IP4="10.1.1.1"ip route add $P1_NET1 dev $ETH1 src $R1 table T1
ip route add default via $IP1 table T1ip route add $P2_NET2 dev $ETH2 src $R2 table T2
ip route add default via $IP2 table T2ip route add $P3_NET dev $ETH3 src $R3 table T3
ip route add default via $R3 table T3ip route add $P1_NET1 dev $ETH1 src $IP1
ip route add $P2_NET2 dev $ETH2 src $IP2
ip route add $P3_NET3 dev $ETH3 src $IP3ip rule add from $IP1 table T1
ip rule add from $IP2 table T2
ip rule add from $IP3 table T3ip route add default scope global nexthop via $R1 dev $ETH1 weight 1 \
nexthop via $R2 dev $ETH2 weight 1 \
nexthop via $R3 dev $ETH3 weight 1
---------------------------------------------Using this script i have conection from my NAT to the all ISPs, but not to LANs. I know that this script have a lack of routing to my LANs
but i have no idea, how build that routing using iproute.
In present configuration i use route command/sbin/routeadd -net 192.168.10.0 netmask 255.255.255.0 gw 192.168.100.2 dev eth0/sbin/routeadd -net 192.168.20.0 netmask 255.255.255.0 gw 192.168.100.2 dev eth0/sbin/routeadd -net 192.168.30.0 netmask 255.255.255.0 gw 192.168.100.2 dev eth0 but this doesnt work with iprote command.
Quoted 4 lines
Thanks for any answer.
----------------------------------------------------------------------
Znajdz swoja milosc na wiosne... >>> http://link.interia.pl/f187a
This works for me:
ip link set lo up
ip addr flush dev lo
ip addr add 127.0.0.1/8 brd + dev lo
# Can now ping localhost
ip link set $IFI up
ip addr flush dev $IFI
ip addr add dev $IFI local $IPI/32 brd $BRDI # Can now ping any host on the internal interface. --
gypsy
_______________________________________________
LARTC mailing list
[email protected]
http://mailman.ds9a.nl/cgi-bin/mailman/listinfo/lartc