dell_rbu: Resubmitting patch for new Dell BIOS update driver
RFC PATCH 1/1 dell_rbu: Resubmitting patch for new Dell BIOS update driver
Quoted 7 lines · Greg KH
Quoted 2 lines · Abhay Salunke
This patch adds a new function to
firmware_calss.crequest_firmware_nowait_nohotplug. Thedell_rbudriver uses this call to create entries in/sys/class/firmware.No, this patch is your whole driver and the firmware changes all together. Please split this up into at least two different patches so we can review them easier.
This mail hs the patch for dell_rbu only , will be sending another patch for firmware_class.c
Signed-off-by Abhay Salunke <[email protected]>
Thanks
Abhay
Documentation/dell_rbu.txt +72 -0
@@ -0,0 +1,72 @@ +Purpose: +Demonstrate the usage of the new open sourced rbu (Remote BIOS Update) driver +for updating BIOS images on Dell servers and desktops. + +Scope: +This document discusses the functionality of the rbu driver only. +It does not cover the support needed from aplications to enable the BIOS to +update itself with the image downloaded in to the memory. + +Overview: +This driver enables userspace applications to update the BIOS on Dell servers +(starting from servers sold since 1999), desktops and notebooks (starting +from those sold in 2005). + +The driver supports BIOS update using the monilothic image and packetized +image methods. In case of moniolithic the driver allocates a contiguous chunk +of physical pages having the BIOS image. In case of packetized the app +using the driver breaks the image in to packets of fixed sizes and the driver +would place each packet in contiguous physical memory. The driver also +maintains a link list of packets for reading them back. +If the dell_rbu driver is unloaded all the allocated memory is freed. + +The rbu driver needs to have an application which will inform the BIOS to +enable the update in the next system reboot. + +The user should not unload the rbu driver after downloading the BIOS image +or updating. + +The driver load creates the following directories under the /sys file system. +/sys/class/firmware/dell_rbu/loading +/sys/class/firmware/dell_rbu/data +/sys/devices/platform/dell_rbu/image_type +/sys/devices/platform/dell_rbu/data + +The driver supports two types of update mechanism; monolithic and packetized. +These update mechanism depends upon the BIOS currently running on the system. +Most of the Dell systems support a monolithic update where the BIOS image is +copied to a single contiguous block of physical memory. +In case of packet mechanism the single memory can be broken in smaller chuks +of contiguous memory and the BIOS image is scattered in these packets. + +By default the driver uses monolithic memory for the update type. This can be +changed to contiguous during the driver load time by specifying the load +parameter image_type=packet. This can also be changed later as below +echo "packet" > /sys/devices/platform/dell_rbu/image_type + +Do the steps below to download the BIOS image. +1) echo 1 > /sys/class/firmware/dell_rbu/loading +2) cp bios_image.hdr /sys/class/firmware/dell_rbu/data +3) echo 0 > /sys/class/firmware/dell_rbu/loading + +The /sys/class/firmware/dell_rbu/ entries will remain till the following is +done. +echo -1 > /sys/class/firmware/dell_rbu/loading + +Until this step is completed the drivr cannot be unloaded. + +Also the driver provides /sys/devices/platform/dell_rbu/data readonly file to +read back the image downloaded. This is useful in case of packet update +mechanism where the above steps 1,2,3 will repeated for every packet. +By reading the /sys/devices/platform/dell_rbu/data file all packet data +downloaded can be verified in a single file. +The packets are arranged in this file one after the other in a FIFO order. + +NOTE: +This driver requires a patch for firmware_class.c which has the addition +of request_firmware_nowait_nohotplug function to wortk +Also after updating the BIOS image an user mdoe application neeeds to execute +code which message the BIOS update request to the BIOS. So on the next reboot +the BIOS knows about the new image downloaded and it updates it self. +Also don't unload the rbu drive if the image has to be updated. +
drivers/firmware/dell_rbu.c +627 -0
627 lines not on this page · raw message
drivers/firmware/Kconfig +11 -0
@@ -58,4 +58,15 @@ config EFI_PCDP See <http://www.dig64.org/specifications/DIG64_HCDPv20_042804.pdf> +config DELL_RBU + tristate "BIOS update support for DELL systems via sysfs" + default y + select FW_LOADER + help + Say Y if you want to have the option of updating the BIOS for your + DELL system. Note you need a supporting application to comunicate + with the BIOS regardin the new image for the image update to + take effect. + See <file:Documentation/dell_rbu.txt> for more details on the driver. + endmenu
drivers/firmware/Makefile +1 -0
@@ -4,3 +4,4 @@ obj-$(CONFIG_EDD) += edd.o obj-$(CONFIG_EFI_VARS) += efivars.o obj-$(CONFIG_EFI_PCDP) += pcdp.o +obj-$(CONFIG_DELL_RBU) += dell_rbu.o