Skip to contentSkip to conversation

2.6.12 vs. /sbin/cardmgr

DISCUSSION Bob Tracy 2 participants 5 messages Jul 9, 2005 – Jul 16, 2005

lore
Share & tools
lore

Bob Tracy

author
#0 lore raw

I've got a Mandrake 10.0 system with a 2.6.12 kernel presently. Somewhere between 2.6.11 and 2.6.12, /sbin/cardmgr from the pcmcia-cs-3.2.5-3mdk package decided it needs to consume incredible amounts of CPU time when invoked the first time following a boot. You can definitely notice the load on the system.

Stopping cardmgr requires a "kill -9": softer kills are ignored. Restarting cardmgr produces the following output:

cardmgr[3731]: watching 2 sockets
cardmgr[3731]: could not adjust resource: IO ports 0xc00-0xcff: Device or resource busy cardmgr[3731]: could not adjust resource: IO ports 0x100-0x4ff: Device or resource busy cardmgr[3731]: could not adjust resource: memory 0xc0000-0xfffff: Input/output error cardmgr[3731]: could not adjust resource: memory 0x60000000-0x60ffffff: Input/output error cardmgr[3731]: could not adjust resource: memory 0xa0000000-0xa0ffffff: Input/output error cardmgr[3731]: could not adjust resource: IO ports 0x1000-0x1fff: Device or resource busy cardmgr[3731]: could not adjust resource: IO ports 0xa00-0xaff: Device or resource busy

But at least it doesn't seem to be running around in tight circles at this point :-).

System is a Dell Latitude CPxJ notebook that continues to work fine with 2.6.11 and older kernels. Any idea what changed between 2.6.11 and 2.6.12 that might be causing this problem? I can probably provide more info on request.

As usual, thanks in advance.

Signature · 4 lines
-----------------------------------------------------------------------
Bob Tracy                   WTO + WIPO = DMCA? http://www.anti-dmca.org
[email protected]
-----------------------------------------------------------------------
#1 lore raw

Hi,

Quoted 18 lines · Bob Tracy

I've got a Mandrake 10.0 system with a 2.6.12 kernel presently. Somewhere between 2.6.11 and 2.6.12, /sbin/cardmgr from the pcmcia-cs-3.2.5-3mdk package decided it needs to consume incredible amounts of CPU time when invoked the first time following a boot. You can definitely notice the load on the system.

Stopping cardmgr requires a "kill -9": softer kills are ignored. Restarting cardmgr produces the following output:

cardmgr[3731]: watching 2 sockets
cardmgr[3731]: could not adjust resource: IO ports 0xc00-0xcff: Device or resource busy cardmgr[3731]: could not adjust resource: IO ports 0x100-0x4ff: Device or resource busy cardmgr[3731]: could not adjust resource: memory 0xc0000-0xfffff: Input/output error cardmgr[3731]: could not adjust resource: memory 0x60000000-0x60ffffff: Input/output error cardmgr[3731]: could not adjust resource: memory 0xa0000000-0xa0ffffff: Input/output error cardmgr[3731]: could not adjust resource: IO ports 0x1000-0x1fff: Device or resource busy cardmgr[3731]: could not adjust resource: IO ports 0xa00-0xaff: Device or resource busy

Quoted 7 lines

But at least it doesn't seem to be running around in tight circles at this point :-).

System is a Dell Latitude CPxJ notebook that continues to work fine with 2.6.11 and older kernels. Any idea what changed between 2.6.11 and 2.6.12 that might be causing this problem? I can probably provide more info on request.

Please post the output of "lspci" and "lsmod" as I'd like to know which kind of PCMCIA bridge is in your notebook.

Dominik

author
#2 lore raw
Quoted 5 lines · Dominik Brodowski
Quoted 1 line · Bob Tracy

(/sbin/cardmgr chewing up lots of CPU cycles with 2.6.12 kernel)

Please post the output of "lspci" and "lsmod" as I'd like to know which kind of PCMCIA bridge is in your notebook.

====-- lspci -v --====

00:00.0 Host bridge: Intel Corp. 440BX/ZX/DX - 82443BX/ZX/DX Host bridge (rev 03)
Flags: bus master, medium devsel, latency 32
Memory at f4000000 (32-bit, prefetchable) [size=64M]
Capabilities: [a0] AGP version 1.0

00:01.0 PCI bridge: Intel Corp. 440BX/ZX/DX - 82443BX/ZX/DX AGP bridge (rev 03) (prog-if 00 [Normal decode])

	Flags: bus master, 66Mhz, medium devsel, latency 32
	Bus: primary=00, secondary=01, subordinate=01, sec-latency=32
	I/O behind bridge: 0000e000-0000efff
	Memory behind bridge: fc000000-feffffff

00:03.0 CardBus bridge: Texas Instruments PCI1225 (rev 01)

	Subsystem: Dell Computer Corporation: Unknown device 00bb
	Flags: bus master, medium devsel, latency 168, IRQ 11
	Memory at 10100000 (32-bit, non-prefetchable) [size=4K]
	Bus: primary=00, secondary=02, subordinate=05, sec-latency=176
	Memory window 0: 10400000-107ff000 (prefetchable)
	Memory window 1: 10800000-10bff000
	I/O window 0: 00004000-000040ff
	I/O window 1: 00004400-000044ff
	16-bit legacy interface ports at 0001

00:03.1 CardBus bridge: Texas Instruments PCI1225 (rev 01)

	Subsystem: Dell Computer Corporation: Unknown device 00bb
	Flags: bus master, medium devsel, latency 168, IRQ 11
	Memory at 10101000 (32-bit, non-prefetchable) [size=4K]
	Bus: primary=00, secondary=06, subordinate=09, sec-latency=176
	Memory window 0: 10c00000-10fff000 (prefetchable)
	Memory window 1: 11000000-113ff000
	I/O window 0: 00004800-000048ff
	I/O window 1: 00004c00-00004cff
	16-bit legacy interface ports at 0001

00:07.0 Bridge: Intel Corp. 82371AB/EB/MB PIIX4 ISA (rev 02)
Flags: bus master, medium devsel, latency 0

00:07.1 IDE interface: Intel Corp. 82371AB/EB/MB PIIX4 IDE (rev 01) (prog-if 80 [Master])

	Flags: bus master, medium devsel, latency 32
	I/O ports at 0860 [size=16]

00:07.2 USB Controller: Intel Corp. 82371AB/EB/MB PIIX4 USB (rev 01) (prog-if 00 [UHCI])

	Flags: bus master, medium devsel, latency 32, IRQ 11
	I/O ports at dce0 [size=32]

00:07.3 Bridge: Intel Corp. 82371AB/EB/MB PIIX4 ACPI (rev 02)
Flags: medium devsel, IRQ 9

00:08.0 Multimedia audio controller: ESS Technology ES1983S Maestro-3i PCI Audio Accelerator (rev 10)
Subsystem: Dell Computer Corporation: Unknown device 00bb
Flags: bus master, medium devsel, latency 32, IRQ 5
I/O ports at d800 [size=256]
Memory at faffe000 (32-bit, non-prefetchable) [size=8K]
Capabilities: [c0] Power Management version 2

01:00.0 VGA compatible controller: ATI Technologies Inc Rage Mobility P/M AGP 2x (rev 64) (prog-if 00 [VGA])
Subsystem: Dell Computer Corporation: Unknown device 00bb
Flags: bus master, stepping, medium devsel, latency 32, IRQ 11
Memory at fd000000 (32-bit, non-prefetchable) [size=16M]
I/O ports at ec00 [size=256]
Memory at fcfff000 (32-bit, non-prefetchable) [size=4K]
Expansion ROM at <unassigned> [disabled] [size=128K]
Capabilities: [50] AGP version 1.0
Capabilities: [5c] Power Management version 1

06:00.0 Ethernet controller: Galileo Technology Ltd.: Unknown device 1fa6 (rev 07)
Subsystem: D-Link System Inc: Unknown device 3b08
Flags: bus master, 66Mhz, medium devsel, latency 168, IRQ 11 Memory at 11000000 (32-bit, non-prefetchable) [size=64K] Memory at 11010000 (32-bit, non-prefetchable) [size=64K]
Capabilities: [40] Power Management version 2

====-- lsmod --====

Module                  Size  Used by
parport_pc             37252  1 
lp                     12132  0 
parport                39048  2 parport_pc,lp
irda                  132120  0 
crc_ccitt               1984  1 irda
snd_seq_oss            37376  0 
snd_seq_midi_event      8320  1 snd_seq_oss
snd_seq                61552  4 snd_seq_oss,snd_seq_midi_event
snd_seq_device          8876  2 snd_seq_oss,snd_seq
snd_pcm_oss            62784  0 
snd_mixer_oss          21440  1 snd_pcm_oss
snd_maestro3           24836  0 
snd_ac97_codec         85432  1 snd_maestro3
snd_pcm               107012  3 snd_pcm_oss,snd_maestro3,snd_ac97_codec
snd_timer              27972  2 snd_seq,snd_pcm
snd_page_alloc         10564  1 snd_pcm
snd                    61060  9 snd_seq_oss,snd_seq,snd_seq_device,snd_pcm_oss,snd_mixer_oss,snd_maestro3,snd_ac97_codec,snd_pcm,snd_timer
soundcore              10272  1 snd
ide_cd                 44196  0 
cdrom                  42752  1 ide_cd
pcmcia                 28552  2 
yenta_socket           23720  3 
rsrc_nonstatic         13952  1 yenta_socket
pcmcia_core            52580  3 pcmcia,yenta_socket,rsrc_nonstatic
driverloader          337488  0 
intel_agp              23708  1 
agpgart                36648  1 intel_agp
uhci_hcd               34384  0 
usbcore               127100  3 driverloader,uhci_hcd
genrtc                 10440  0 
joydev                  9952  0 
evdev                   9408  0 
Signature · 4 lines
-----------------------------------------------------------------------
Bob Tracy                   WTO + WIPO = DMCA? http://www.anti-dmca.org
[email protected]
-----------------------------------------------------------------------
#3 lore raw

Hi,

Quoted 6 lines · Bob Tracy
Quoted 5 lines · Dominik Brodowski
Quoted 1 line · Bob Tracy

(/sbin/cardmgr chewing up lots of CPU cycles with 2.6.12 kernel)

Please post the output of "lspci" and "lsmod" as I'd like to know which kind of PCMCIA bridge is in your notebook.

OK, it's a plain TI1225. Could you try whether the bug is still existent in 2.6.13-rc3, please?

Thanks,
Dominik

author
#4 lore raw
Quoted 10 lines · Dominik Brodowski
Quoted 6 lines · Bob Tracy
Quoted 5 lines · Dominik Brodowski
Quoted 1 line · Bob Tracy

(/sbin/cardmgr chewing up lots of CPU cycles with 2.6.12 kernel)

Please post the output of "lspci" and "lsmod" as I'd like to know which kind of PCMCIA bridge is in your notebook.

OK, it's a plain TI1225. Could you try whether the bug is still existent in 2.6.13-rc3, please?

2.6.13-rc3 works fine here. The "cardmgr" process is no longer chewing up lots of CPU time, and otherwise seems to be working correctly. Thanks!

Signature · 4 lines
-----------------------------------------------------------------------
Bob Tracy                   WTO + WIPO = DMCA? http://www.anti-dmca.org
[email protected]
-----------------------------------------------------------------------