PLEASE HELP! SHAPING P2P STILL NOT WORKING
Hello, some days ago, I was asking for help here about not able to do anything when I had bittorrent running, I will post the problem here:
I'm using ipp2p to mark p2p packets, and then send them with -j CLASSIFY to the correct HTB class, I see traffic in the class when I start azurerus, and traffic does get shaped, but then I'm still not able to surf the web nor chat nor anything, and I find this very weird, since the traffic is actually shaped, then what am I missing? anyone had a similar problem? I really don't know why this is happening, and I've tried lots of different setups but the problem remains. This is in the server, which NAT the connections to 2 computers at home, I will know post the tcng rules, and the iptables rules too:
IPTABLES RULES:
iptables -t mangle -A PREROUTING -p tcp -m ipp2p --ipp2p -j MARK --set-mark 3 iptables -t mangle -A PREROUTING -p udp -m ipp2p --bit -j MARK --set-mark 3 iptables -t mangle -A PREROUTING -p tcp -m mark --mark 3 -j CONNMARK --save-mark
iptables -t mangle -A ipp2pPOST -o $DEV -m mark --mark 3 -j CLASSIFY --set-class $P2P
TCNG FILE, AND TC CLASSES
#define UPLOAD eth1
#define UPRATE 25kBps
#define P2P 10kBps
dev UPLOAD {
egress {
class ( <$prio> ) ;
class ( <$p2p> ) ;
class ( <$interactive> )
/* ACK packets go in this class */
if ip_hl = 0x5 &&
! (ip_len & 0xffc0) &&
(raw[33].b >> 4) & 0xff
if 1 ;
htb () {
class ( rate UPRATE, ceil UPRATE ) {
$prio = class ( prio 0, rate 6kBps, ceil UPRATE ) { sfq; } ;
$p2p = class ( prio 7, rate 1kBps, ceil P2P )
{ sfq; } ;
$interactive = class ( prio 1, rate 18kBps,
ceil UPRATE ) { sfq; } ;
}
}
}
}CLASSES
class htb 2:1 root rate 200000bit ceil 200000bit burst 1624b cburst 1624b class htb 2:2 parent 2:1 leaf 3: prio 0 rate 48000bit ceil 200000bit burst 1605b cburst 1624b
class htb 2:3 parent 2:1 leaf 4: prio 7 rate 8000bit ceil 80000bit burst 1600b cburst 1609b
class htb 2:4 parent 2:1 leaf 5: prio 1 rate 144000bit ceil 200000bit burst 1617b cburst 1624b
As you can see here, class 2:3 stands for the p2p class, and that's where I send the marked p2p packets, I don't see why this configuration is not working, please help me out with this. Thank you in advance
EDGAR MERINO
_______________________________________________
LARTC mailing list
[email protected]
http://mailman.ds9a.nl/cgi-bin/mailman/listinfo/lartc