usb mass storage bug
Sorry, no logs or dmesg to report; just performance. Using kernel 2.6.12: USB flash drive (san-disk cruzer micro) Copy FROM drive is normal and quick; copy TO drive is amazingly slow. (30 minutes for 50K file). Used same configuration as for 2.6.11.11. Cured by going back to old kernel.
Sorry I can't give better report.
Thank you.
Joe Sevy
__________________________________________________
Do You Yahoo!?
Tired of spam? Yahoo! Mail has the best spam protection around
http://mail.yahoo.com
Quoted 6 lines · Joe Sevy
Sorry, no logs or dmesg to report; just performance. Using kernel 2.6.12: USB flash drive (san-disk cruzer micro) Copy FROM drive is normal and quick; copy TO drive is amazingly slow. (30 minutes for 50K file). Used same configuration as for 2.6.11.11. Cured by going back to old kernel.
Are you using CONFIG_UB or CONFIG_USB_STORAGE?
Also, linux-usb-devel is the better place for this if you have a more detailed report.
thanks,
greg k-h
A message that is not in the archive (sent off-list or not yet received): [email protected]
Quoted 9 lines · Greg KH
Quoted 6 lines · Joe Sevy
Sorry, no logs or dmesg to report; just performance. Using kernel 2.6.12: USB flash drive (san-disk cruzer micro) Copy FROM drive is normal and quick; copy TO drive is amazingly slow. (30 minutes for 50K file). Used same configuration as for 2.6.11.11. Cured by going back to old kernel.
Are you using
CONFIG_UBorCONFIG_USB_STORAGE?
Please, Greg. I knew that someone will try to implicate ub here, but you? Consider two things:
#1 Joe's kernel reads and writes and sharply different speeds,
while ub is uniformly slow
#2 It's a regression in 2.6.12
-- Pete
Quoted 9 lines · Pete Zaitcev
Quoted 8 lines · Greg KH
Quoted 6 lines · Joe Sevy
Sorry, no logs or dmesg to report; just performance. Using kernel 2.6.12: USB flash drive (san-disk cruzer micro) Copy FROM drive is normal and quick; copy TO drive is amazingly slow. (30 minutes for 50K file). Used same configuration as for 2.6.11.11. Cured by going back to old kernel.
Quoted 3 lines
Quoted 1 line
Are you using
CONFIG_UBorCONFIG_USB_STORAGE?Please, Greg. I knew that someone will try to implicate ub here, but you?
Heh, sorry, I didn't really pay attention for the time ammounts, only that he reported things slower.
You are right, ub isn't _that_ slow at all, I use it all the time on some of my devices just fine.
thanks,
greg k-h
can you tell if it is ehci, ohci or uhci?
[Alberto Santini][[email protected]][http://laGNUsi.net/] [Actually the only one TECO developer, i believe:] [Want to help me? Mail me!]
Quoted 2 lines · Greg KH
You are right, ub isn't _that_ slow at all, I use it all the time on some of my devices just fine.
Ub actually gets terribly slow when partition size is odd (for both reading and writing). I even have a patch for it, but it's yucky. Here's the original discussion:
http://groups-beta.google.com/group/linux.kernel/browse_frm/thread/f11b7721d7ed6d1f&hl=en
-- Pete