USB Audio - Silence
Hello,
I have an USB device with one Audio Class interface.snd_usb_audio detects it and register the corresponding card:
#amixer -c 3
Simple mixer control 'PCM',0
Capabilities: cvolume cswitch cswitch-joined
Capture channels: Mono
Limits: Capture 0 - 3
Mono: Capture 3 [100%] [on]
Also recording sems to work fine:
$ arecord -f dat -d 10 -D hw:3,0 foobar.wav Recording WAVE 'foobar.wav' : Signed 16 bit Little Endian, Rate 48000 Hz, Stereo $ ls -l foobar.wav -rw-r--r-- 1 foo foo 1920044 13 lug 00:16 foobar.wav
The problem is that I obtain a file does not contain anything other than a sequence of "40 00" (hex) bytes.
Any idea on what happens?
Best regards
-------------------------------------------------------
This SF.Net email is sponsored by the 'Do More With Dual!' webinar happening July 14 at 8am PDT/11am EDT. We invite you to explore the latest in dual core and dual graphics technology at this free one hour event hosted by HP, AMD, and NVIDIA. To register visit http://www.hp.com/go/dualwebinar
Quoted 6 lines · Smery
I have an USB device with one Audio Class interface.
snd_usb_audiodetects it and register the corresponding card:
Also recording sems to work fine:The problem is that I obtain a file does not contain anything other than a sequence of "40 00" (hex) bytes.
What is the output of "amixer -c 3 contents" and "lsusb -v" for your device?
Regards,
Clemens
-------------------------------------------------------
This SF.Net email is sponsored by the 'Do More With Dual!' webinar happening July 14 at 8am PDT/11am EDT. We invite you to explore the latest in dual core and dual graphics technology at this free one hour event hosted by HP, AMD, and NVIDIA. To register visit http://www.hp.com/go/dualwebinar