2.6.13-rc3 Battery times at 100/250/1000 Hz = Zero difference
I'd gladly (ehum..) redo this mind-numbingly boring test if someone can point me to a magic software which unleashes some untapped powersaving feature of the CPU.
_Kernel 2.6.13-rc3 Boot to Death_:
2h48m at 100 HZ
2h48m at 250 HZ
2h47m at 1000 HZ
_"Load"_:
#!/bin/sh
touch time-hz-start
while (true) do
touch time-hz-end
sleep 1m
done
_Environment_:
No distro (LFS-ish pure 64 bit), no X, no network, no cronjobs, no peripherals attached. Screen off by hardware switch, but disk obviously spinning all the time. powernow_k8 + cpufreq_userspace + powernowd-0.96 = 800 MHz at "idle". Fan(s?) always on unless room temperature falls to a slightly chilly level.
_Machine_:
Acer Aspire 1520 (1524) WLMi, AMD Athlon 64 3400+ (socket 754 according to dmidecode-2.6). L1 64K/64K, L2 1024K, 512MB DDR RAM. Manufacturing date 18 March 2005. Bought 20 May 2005. Battery used to full drain ca 5 times prior to this test (after the initial 3 charge/drains to reach its full potential). "cat /proc/acpi/battery/BAT0/info":
present: yes design capacity: 4000 mAh last full capacity: 4000 mAh battery technology: rechargeable design voltage: 14800 mV design capacity warning: 400 mAh design capacity low: 120 mAh capacity granularity 1: 280 mAh capacity granularity 2: 3880 mAh model number: Bat 8Cell serial number: 236 battery type: Lion OEM info: Acer
Mvh
Mats Johannesson
--
Quoted 11 lines · Voluspa
I'd gladly (ehum..) redo this mind-numbingly boring test if someone can point me to a magic software which unleashes some untapped powersaving feature of the CPU.
_Kernel2.6.13-rc3 Boot toDeath_:2h48m at 100 HZ
2h48m at 250 HZ
2h47m at 1000 HZ
Quoted 9 lines
_"Load"_:
#!/bin/sh
touch time-hz-start
while (true) do
touch time-hz-end
sleep 1m
done
Ok, so with an idle machine, different HZ makes no noticeable difference, but I'd suspect things would be different if the machine was actually doing some work.
Would be more interresting to see how long it lasts with a light load and with a heavy load.
Signature · 3 lines
Jesper Juhl <[email protected]> Don't top-post http://www.catb.org/~esr/jargon/html/T/top-post.html Plain text mails only, please http://www.expita.com/nomime.html
Quoted 1 line · On Thu, 21 Jul 2005 20:14:32 +0200 Jesper Juhl wrote:
On 7/21/05, Voluspa <[email protected]> wrote:
[...]
Quoted 4 lines
Quoted 1 line
Ok, so with an idle machine, different HZ makes no noticeable difference, but I'd suspect things would be different if the machine was actually doing some work.
I first thought about loading with a loop of md5sum /somedir, play a wav, fetch a couple of webpages etc. But since the talk has been that the powersave would come from CPU sleep between "ticks" (I know, I know, it's not ticks) not having to wake up so often, I decided against a load.
Quoted 2 lines
Would be more interresting to see how long it lasts with a light load and with a heavy load.
I won't do that unless heavily beaten ;-) The battery charge time is 2h10 minutes...
Mvh
Mats Johannesson
--
Hi!
Quoted 19 lines
Quoted 10 lines
I'd gladly (ehum..) redo this mind-numbingly boring test if someone can point me to a magic software which unleashes some untapped powersaving feature of the CPU.
_Kernel2.6.13-rc3 Boot toDeath_:2h48m at 100 HZ
2h48m at 250 HZ
2h47m at 1000 HZQuoted 9 lines
_"Load"_:
#!/bin/sh
touch time-hz-start
while (true) do
touch time-hz-end
sleep 1m
done
Quoted 5 lines
Ok, so with an idle machine, different HZ makes no noticeable difference, but I'd suspect things would be different if the machine was actually doing some work.
Would be more interresting to see how long it lasts with a light load and with a heavy load.
No, I do not think so. Biggest difference should be on completely idle machine where ACPI can utilize low power states.
Can you check that C3 is utilized? Unloading usb modules may be neccessary...
Pavel
Signature · 1 line
teflon -- maybe it is a trademark, but it should not be.
On Fri, 22 Jul 2005 16:48:55 +0200 Pavel Machek wrote:
[...]
.......Jesper Juhl wrote
Quoted 11 lines
Quoted 5 lines
Ok, so with an idle machine, different HZ makes no noticeable difference, but I'd suspect things would be different if the machine was actually doing some work.
Would be more interresting to see how long it lasts with a light load and with a heavy load.No, I do not think so. Biggest difference should be on completely idle machine where ACPI can utilize low power states.
Can you check that C3 is utilized? Unloading usb modules may be neccessary...
I've been reading/checking up on this the last four hours since I had a nagging suspicion that the CPU indeed didn't enter a sleep state. With all the abbreviations in the ACPI field (S1, C1, P1 etc) it killed a fair amount of brain cells, but I'd still call faul on this:
from /var/log/kernel
[powernow-k8 module loads processor module which says]
ACPI: CPU0 (power states: C1[C1])
and catting /proc/acpi/processor/CPU0/power gives
active state: C1max_cstate: C8
bus master activity: 00000000
states:
*C1: type[C1] promotion[--] demotion[--] latency[000] usage[02998796]
/sys/module/processor/parameters/max_cstate says 8 /sys/module/processor/parameters/bm_history says 4294967295
So I'm a bit baffled that no C2/C3 turns up. I've done a test-compile with all of ACPI in kernel instead of as modules, but there was no difference.
I'll unload the whole USB-module part and boot without loading them, but will it matter? Please provide more details about how to debug this (very confusing) field.
Mvh
Mats Johannesson
--
Hi!
Quoted 10 lines
and catting
/proc/acpi/processor/CPU0/powergives
active state: C1max_cstate: C8
bus master activity: 00000000
states:*C1: type[C1] promotion[--] demotion[--] latency[000] usage[02998796]
/sys/module/processor/parameters/max_cstatesays 8/sys/module/processor/parameters/bm_historysays 4294967295
Quoted 7 lines
So I'm a bit baffled that no C2/C3 turns up. I've done a test-compile with all of ACPI in kernel instead of as modules, but there was no difference.
I'll unload the whole USB-module part and boot without loading them, but will it matter? Please provide more details about how to debug this (very confusing) field.
Okay, if you have no C2/C3 like the dump above shows, unloading usb will not help. It seems like your machine is simply not able to do reasonable powersaving.
Pavel
Signature · 1 line
Boycott Kodak -- for their patent abuse against Java.
Quoted 3 lines · On Fri, 22 Jul 2005 20:02:36 +0200 Pavel Machek wrote:
Okay, if you have no C2/C3 like the dump above shows, unloading usb will not help. It seems like your machine is simply not able to do reasonable powersaving.
Because of the CPU, ACPI implementation or because of kernel acpi quality, x86_64 kernel quirks or...? It seems crazy that a modern CPU like this should be so backwards as to not implement sleep states. It being in a notebook and all. I blame intel kernel hackers ;-)
Mvh
Mats Johannesson
--
Quoted 2 lines · On Fri, 22 Jul 2005 20:02:36 +0200 Pavel Machek wrote:
will not help. It seems like your machine is simply not able to do reasonable powersaving.
Digging up this patch from last month regarding C2 on a AMD K7 implies that the whole blame can be put on kernel acpi:
http://marc.theaimsgroup.com/?l=linux-kernel&m=111933745131301&w=2
Mvh
Mats Johannesson
--
Quoted 8 lines · Voluspa
Quoted 2 lines · On Fri, 22 Jul 2005 20:02:36 +0200 Pavel Machek wrote:
will not help. It seems like your machine is simply not able to do reasonable powersaving.
Digging up this patch from last month regarding C2 on a AMD K7 implies that the whole blame can be put on kernel acpi:
http://marc.theaimsgroup.com/?l=linux-kernel&m=111933745131301&w=2
AFAIK Linux ACPI expects BIOS to contain all the necessary stuff to enable C2 and C3. Otherwise they won't get enabled, and you have to create a custom module like the amd76x_pm is.
There's been some talk on adding a module to enable C2 and C3 states for various chipsets, but nobody seems to have enough time to do it...
Tony
Quoted 10 lines · Tony Lindgren
Quoted 8 lines · Voluspa
Quoted 2 lines · On Fri, 22 Jul 2005 20:02:36 +0200 Pavel Machek wrote:
will not help. It seems like your machine is simply not able to do reasonable powersaving.
Digging up this patch from last month regarding C2 on a AMD K7 implies that the whole blame can be put on kernel acpi:
Quoted 6 lines
AFAIK Linux ACPI expects BIOS to contain all the necessary stuff to enable C2 and C3. Otherwise they won't get enabled, and you have to create a custom module like the
amd76x_pmis.
Does that imply that Windows actually has such non-BIOS code, or just knows how to find the BIOS code better, or knows how to do other things, or ???
Quoted 3 lines
There's been some talk on adding a module to enable C2 and C3 states for various chipsets, but nobody seems to have enough time to do it...
I like your first thought better, "Linux ACPI expects BIOS to contain all the necessary stuff" I have a bunch of laptops of various ages, and I would expect at least the most recent, an ASUS 16??, using a "Centrino" chipset, to be supported. It's one of the top few laptopl chipsets, and Windows can suspecd it. Can also not only detect but use the 1400x1050 screen, but that's another issue :-(
Is it possible that the code to find these capabilities is not fully functional? That seems more likely than the system not having the capability. NOTE: "seems" as in experienced guess unsupported by other relevant information.
Signature · 3 lines
-bill davidsen ([email protected]) "The secret to procrastination is to put things off until the last possible moment - but no longer" -me
2005/7/21, Voluspa <[email protected]>:
Quoted 4 lines
2h48m at 100 HZ
2h48m at 250 HZ
2h47m at 1000 HZ
Now, what would be interesting is to see if the lack of differences comes from the fact that the processor has enough time to sleep, not enough time, or simply it does not matter.
That is, is it a best case or a worst case ?
Quoted 6 lines
#!/bin/sh
touch time-hz-start
while (true) do
touch time-hz-end
sleep 1m
done
Why this ?
Why not simply nothing ?
A computer can be idle for more than 1 minute ;-)
Signature · 1 line
Guillaume
Quoted 11 lines · On Thu, 21 Jul 2005 20:49:59 +0200 Guillaume Chazarain wrote:
2005/7/21, Voluspa <[email protected]>:
Quoted 4 lines
2h48m at 100 HZ
2h48m at 250 HZ
2h47m at 1000 HZNow, what would be interesting is to see if the lack of differences comes from the fact that the processor has enough time to sleep, not enough time, or simply it does not matter.
That is, is it a best case or a worst case ?
Those words swished above my head. I'd need serious hand-holding to conduct any further (meaningful) tests.
Quoted 11 lines
Quoted 7 lines
#!/bin/sh
touch time-hz-start
while (true) do
touch time-hz-end
sleep 1m
doneWhy this ?
Why not simply nothing ?
A computer can be idle for more than 1 minute ;-)
I had other things to do than sit with a stopwatch in my hand staring at a black screen :-) Also, 1 minute is a resonable comparison level.
Mvh
Mats Johannesson
--
Quoted 10 lines · Voluspa
I'd gladly (ehum..) redo this mind-numbingly boring test if someone can point me to a magic software which unleashes some untapped powersaving feature of the CPU.
_Kernel2.6.13-rc3 Boot toDeath_:2h48m at 100 HZ
2h48m at 250 HZ
2h47m at 1000 HZ
Is USB loaded? It'll do 1000 interrupts per second if it is. I'm not sure if this still is the case on 2.6.13-rc3, please check your /proc/interrupts to see the rate at which interrupt counters are increasing.
Quoted 5 lines
Acer Aspire 1520 (1524) WLMi, AMD Athlon 64 3400+ (socket 754 according to dmidecode-2.6). L1 64K/64K, L2 1024K, 512MB DDR RAM. Manufacturing date 18 March 2005. Bought 20 May 2005. Battery used to full drain ca 5 times prior to this test (after the initial 3 charge/drains to reach its full potential). "cat
/proc/acpi/battery/BAT0/info":
This almost looks like a regular Athlon 64, not even the mobile version. I wouldn't expect very big deep sleep capabilities on that one. You can check the
/proc/acpi/processor/CPU1/power
file for the list of C states. A normal Athlon64 will likely have only C0. Mobile chips can go up to C4, which is really deep sleep.
Signature · 2 lines
Vojtech Pavlik SuSE Labs, SuSE CR
Quoted 8 lines · On Tue, 26 Jul 2005 15:14:39 +0200 Vojtech Pavlik wrote:
This almost looks like a regular Athlon 64, not even the mobile version. I wouldn't expect very big deep sleep capabilities on that one. You can check the
/proc/acpi/processor/CPU1/powerfile for the list of C states. A normal Athlon64 will likely have only C0. Mobile chips can go up to C4, which is really deep sleep.
You've probably already seen that /proc/acpi/processor/CPU1/power lists C1 only here. Ok, with your input regarding normal CPUs I'm inclined to believe ACPI is correct in my case. Still, I'll learn/read the code. Always have had a need to finish those long marches.
Mvh
Mats Johannesson
--