Skip to contentSkip to conversation

Problem with Asus P4C800-DX and P4 -Northwood-

DISCUSSION Andreas Baer 8 participants 17 messages Jul 25, 2005 – Jul 26, 2005

lore
Share & tools
lore
#0 lore raw

Hi everyone,

First I want to say sorry for this BIG post, but it seems that I have no other chance. :)

I have a Asus P4C800-DX with a P4 2,4 GHz 512 KB L2 Cache "Northwood" Processor (lowest Processor that supports HyperThreading) and 1GB DDR400 RAM. I'm also running S-ATA disks with about 50 MB/s (just to show that it shouldn't be due to hard disk speed). Everything was bought back in 2003 and I recently upgraded to the lastest BIOS Version. I've installed Gentoo Linux and WinXP with dual-boot on this system.

Now to my problem:

I'm currently developing a little database in C++ (runs currently under Windows and Linux) that internally builds up an R-Tree and does a lot of equality tests and other time consuming checks. For perfomance issue I ran a test with 200000 entries and it took me about 3 minutes to complete under Gentoo Linux.

So I ran the same test in Windows on the same platform and it took about 30(!) seconds. I was a little bit surprised about this result so I started to run several tests on different machines like an Athlon XP 2000+ platform and on my P4 3GHz "Prescott" Notebook and they all showed something about 30 seconds or below. Then I began to search for errors or any misconfiguration in Gentoo, in my code and also for people that have made equal experiences with that hardware configuration on the internet. I thought I have a problem with a broken gcc or libraries like glibc or libstdc++ and so I recompiled my whole system with the stable gcc 3.3.5 release, but that didn't make any changes. I also tried an Ubuntu and a Suse LiveCD to verify that it has nothing to do with Gentoo and my kernel version and they had the same problem and ran the test in about 3 min.

Currently I'm at a loss what to do. I'm beginning to think that this is maybe a kernel problem because I have no problems under Windows and it doesn't matter whether I change any software or any configuration in Gentoo. I'm currently running kernel-2.6.12, but the Livecd's had other kernels.

HyperThreading(HT) is also not the reason for the loss of power, because I tried to disable it and to create a uniprocessor kernel, but that didn't solve the problem.

If you need some output of my configuration/log files or anything like that, just mail me.

Is it possible that the kernel has a lack of support for P4 with "Northwood" core? Maybe only this one? Could I solve the problem if I change the processor to a "Prescott" core? Perhaps someone could provide any information if this would make any sense or not.

Thanks in advance for anything that could help.

...sorry for bad english :)

#1 lore raw

Hi,

Quoted 4 lines · Andreas Baer

Hi everyone,

First I want to say sorry for this BIG post, but it seems that I have no other chance. :)

It's not big enough, you did not explain us what your database does nor how it does work, what type of resource it consumes most, any vmstat capture during operation. There are so many possibilities here :
- poor optimisation from gcc => CPU bound

- many random disk accesses => I/O bound, but changing/tuning the I/O scheduler could help

- intensive disk reads => perhaps your windows and linux partitions are on the same disk and windows is the first one, then you have 50 MB/s on the windows one and 25 MB/s on the linux one ?

- task scheduling : if your application is multi-process/multi-thread, it is possible that you hit some corner cases.

So please start "vmstat 1" before your 3min request, and stop it at the end, so that it covers all the work. It will tell us many more useful information.

Regards,
Willy

Quoted 55 lines

I have a Asus P4C800-DX with a P4 2,4 GHz 512 KB L2 Cache "Northwood" Processor (lowest Processor that supports HyperThreading) and 1GB DDR400 RAM. I'm also running S-ATA disks with about 50 MB/s (just to show that it shouldn't be due to hard disk speed). Everything was bought back in 2003 and I recently upgraded to the lastest BIOS Version. I've installed Gentoo Linux and WinXP with dual-boot on this system.

Now to my problem:

I'm currently developing a little database in C++ (runs currently under Windows and Linux) that internally builds up an R-Tree and does a lot of equality tests and other time consuming checks. For perfomance issue I ran a test with 200000 entries and it took me about 3 minutes to complete under Gentoo Linux.

So I ran the same test in Windows on the same platform and it took about 30(!) seconds. I was a little bit surprised about this result so I started to run several tests on different machines like an Athlon XP 2000+ platform and on my P4 3GHz "Prescott" Notebook and they all showed something about 30 seconds or below. Then I began to search for errors or any misconfiguration in Gentoo, in my code and also for people that have made equal experiences with that hardware configuration on the internet. I thought I have a problem with a broken gcc or libraries like glibc or libstdc++ and so I recompiled my whole system with the stable gcc 3.3.5 release, but that didn't make any changes. I also tried an Ubuntu and a Suse LiveCD to verify that it has nothing to do with Gentoo and my kernel version and they had the same problem and ran the test in about 3 min.

Currently I'm at a loss what to do. I'm beginning to think that this is maybe a kernel problem because I have no problems under Windows and it doesn't matter whether I change any software or any configuration in Gentoo. I'm currently running kernel-2.6.12, but the Livecd's had other kernels.

HyperThreading(HT) is also not the reason for the loss of power, because I tried to disable it and to create a uniprocessor kernel, but that didn't solve the problem.

If you need some output of my configuration/log files or anything like that, just mail me.

Is it possible that the kernel has a lack of support for P4 with "Northwood" core? Maybe only this one? Could I solve the problem if I change the processor to a "Prescott" core? Perhaps someone could provide any information if this would make any sense or not.

Thanks in advance for anything that could help.

...sorry for bad english :)
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/

#2 lore raw

Hi,

Thanks for reply.
Sorry, but I've never done any vmstat operation before so next time I'll send the output in the first mail :)

Quoted 6 lines · Willy Tarreau

Hi,

Quoted 2 lines · Andreas Baer

Hi everyone,

Quoted 7 lines
Quoted 1 line

First I want to say sorry for this BIG post, but it seems that I have no other chance. :)

It's not big enough, you did not explain us what your database does nor how it does work, what type of resource it consumes most, any vmstat capture during operation. There are so many possibilities here :
- poor optimisation from gcc => CPU bound

I doubt it, because I've run the same binaries (no recompilation) on both systems. (you will see vmstat output below)

Quoted 2 lines

- many random disk accesses => I/O bound, but changing/tuning the I/O scheduler could help

Indeed, the data is stored in random access files.

Quoted 3 lines

- intensive disk reads => perhaps your windows and linux partitions are on the same disk and windows is the first one, then you have 50 MB/s on the windows one and 25 MB/s on the linux one ?

I have (S-ATA-150 Disk 80GB)

         /dev/sda:  50.59 MB/sec
         /dev/sda1: 50.62 MB/sec    (Windows FAT32)
         /dev/sda6: 41.63 MB/sec    (Linux ReiserFS)

On the Notebook I have at most an ATA-100 Disk with 80GB and it shows the same declension.

Here I have

         /dev/hda:  26.91 MB/sec
         /dev/hda1: 26.90 MB/sec    (Windows FAT32)
         /dev/hda7: 17.89 MB/sec    (Linux EXT3)

Could you give me a reason how this is possible?

Quoted 2 lines

- task scheduling : if your application is multi-process/multi-thread, it is possible that you hit some corner cases.

There are only a maximum of 2 Threads started and they have more background activity or do nothing, should have nothing to do with this problem.

Quoted 3 lines

So please start "vmstat 1" before your 3min request, and stop it at the end, so that it covers all the work. It will tell us many more useful information.

all output below...

Quoted 29 lines

Regards,
Willy

Quoted 24 lines

I have a Asus P4C800-DX with a P4 2,4 GHz 512 KB L2 Cache "Northwood" Processor (lowest Processor that supports HyperThreading) and 1GB DDR400 RAM. I'm also running S-ATA disks with about 50 MB/s (just to show that it shouldn't be due to hard disk speed). Everything was bought back in 2003 and I recently upgraded to the lastest BIOS Version. I've installed Gentoo Linux and WinXP with dual-boot on this system.

Now to my problem:

I'm currently developing a little database in C++ (runs currently under Windows and Linux) that internally builds up an R-Tree and does a lot of equality tests and other time consuming checks. For perfomance issue I ran a test with 200000 entries and it took me about 3 minutes to complete under Gentoo Linux.

So I ran the same test in Windows on the same platform and it took about 30(!) seconds. I was a little bit surprised about this result so I started to run several tests on different machines like an Athlon XP 2000+ platform and on my P4 3GHz "Prescott" Notebook and they all showed something about 30 seconds or below. Then I began to search for errors or any misconfiguration in Gentoo, in my code and also for people that have made equal experiences with that hardware configuration on the internet. I thought I have a problem with a broken gcc or libraries like glibc or libstdc++ and so I recompiled my whole system with the stable gcc 3.3.5 release, but that didn't make any changes. I also tried an Ubuntu and a Suse LiveCD to verify that it has nothing to do with Gentoo and my kernel version and they had the same problem and ran the test in about 3 min.

Currently I'm at a loss what to do. I'm beginning to think that this is maybe a kernel problem because I have no problems under Windows and it doesn't matter whether I change any software or any configuration in Gentoo. I'm currently running kernel-2.6.12, but the Livecd's had other kernels.

HyperThreading(HT) is also not the reason for the loss of power, because I tried to disable it and to create a uniprocessor kernel, but that didn't solve the problem.

If you need some output of my configuration/log files or anything like that, just mail me.

Is it possible that the kernel has a lack of support for P4 with "Northwood" core? Maybe only this one? Could I solve the problem if I change the processor to a "Prescott" core? Perhaps someone could provide any information if this would make any sense or not.

Thanks in advance for anything that could help.

...sorry for bad english :)
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/

Vmstat for Notebook P4 3.0 GHz 512 MB RAM:

procs -----------memory---------- ---swap-- -----io---- --system-- ----cpu----

 r  b   swpd   free   buff  cache   si   so    bi    bo   in    cs us sy id wa
 1  0      0 179620  14812 228832    0    0    33    21  557   184  3  1 95  1
 2  0      0 178828  14812 228832    0    0     0     0 1295   819  6  2 92  0
 1  0      0 175948  14812 228832    0    0     0     0 1090   111 37 17 46  0
 1  0      0 175948  14812 228832    0    0     0     0 1064   101 23 28 50  0
 1  0      0 175948  14812 228832    0    0     0     0 1066   100 20 31 49  0
 1  0      0 175980  14820 228824    0    0     0    48 1066   119 20 30 50  0
 1  0      0 175980  14820 228824    0    0     0     0 1067    86 19 31 50  0
 1  0      0 175988  14820 228824    0    0     0     0 1064   115 20 30 50  0
 1  0      0 175988  14820 228824    0    0     0     0 1065   107 20 31 50  0
 1  0      0 176020  14820 228824    0    0     0     0 1063   111 20 30 50  0
 1  0      0 176020  14820 228824    0    0     0     0 1066   104 21 30 49  0
 1  0      0 176276  14828 228816    0    0     0    12 1065   140 21 30 50  0
 1  0      0 176276  14828 228816    0    0     0     0 1065    93 19 31 50  0
 1  0      0 176052  14828 228816    0    0     0     0 1063   119 23 28 50  0
 1  0      0 175796  14828 228816    0    0     0     0 1067   101 23 27 50  0
 1  0      0 175860  14828 228816    0    0     0     0 1064   117 22 29 50  0
 1  0      0 175860  14828 228816    0    0     0     0 1066   103 22 29 49  0
 1  0      0 175860  14836 228808    0    0     0    16 1065   119 21 30 50  0
 1  0      0 175860  14836 228808    0    0     0     0 1063   104 21 29 50  0
 1  0      0 175860  14836 228808    0    0     0     0 1063   111 19 31 50  0
 1  0      0 176180  14836 228808    0    0     0     0 1073   124 22 30 49  0
 1  0      0 176052  14836 228808    0    0     0     4 1113   183 20 32 49  0
 0  0      0 180052  14844 228800    0    0     0    12 1269  1083 17 20 64  0
 0  0      0 180164  14844 228800    0    0     0     0 1255  1311  2  2 96  0

Vmstat for Desktop P4 2.4 GHz 1024 MB RAM:

procs -----------memory---------- ---swap-- -----io---- --system-- ----cpu----

 r  b   swpd   free   buff  cache   si   so    bi    bo   in    cs us sy id wa
 1  0      0 594688  39340 292228    0    0    52    29  581   484  5  2 92  2
 1  0      0 591208  39340 292228    0    0     0    68 1116   545 15 14 71  0
 1  0      0 591208  39340 292228    0    0     0     0 1090   112  3 48 50  0
 1  0      0 591208  39340 292228    0    0     0     0 1089   124  2 48 50  0
 1  0      0 591208  39340 292228    0    0     0     0 1089   114  3 48 50  0
 1  0      0 591208  39340 292228    0    0     0     0 1090   120  1 49 50  0
 1  0      0 591208  39340 292228    0    0     0    24 1094   138  2 49 50  0
 1  0      0 591256  39340 292228    0    0     0     0 1090   118  2 48 50  0
 1  0      0 591256  39340 292228    0    0     0     0 1092   125  2 48 50  0
 1  0      0 591256  39340 292228    0    0     0     0 1089   112  2 48 50  0
 1  0      0 591256  39340 292228    0    0     0     0 1089   118  2 49 50  0
 1  0      0 591304  39340 292228    0    0     0    16 1094   129  2 48 50  0
 1  0      0 591304  39340 292228    0    0     0     0 1090   123  2 49 50  0
 1  0      0 591304  39340 292228    0    0     0     0 1089   127  3 48 50  0
 1  0      0 591304  39340 292228    0    0     0     0 1090   106  2 48 50  0
 1  0      0 591320  39340 292228    0    0     0     0 1089   110  2 49 49  0
 1  0      0 591320  39340 292228    0    0     0    16 1093   124  3 48 50  0
 1  0      0 591320  39340 292228    0    0     0     0 1090   122  2 49 50  0
 1  0      0 591320  39340 292228    0    0     0     0 1092   133  3 47 50  0
 1  0      0 591320  39340 292228    0    0     0     0 1089   118  2 49 50  0
 1  0      0 591320  39340 292228    0    0     0     0 1090   128  2 48 50  0
 1  0      0 591320  39340 292228    0    0     0    16 1094   139  3 48 50  0
 1  0      0 591320  39340 292228    0    0     0     0 1089   125  2 49 50  0
 1  0      0 591320  39340 292228    0    0     0     0 1091   126  3 48 50  0
 1  0      0 591320  39340 292228    0    0     0     0 1089   118  2 48 50  0
 1  0      0 591320  39340 292228    0    0     0     0 1089   123  2 49 50  0
 1  0      0 591320  39340 292228    0    0     0    16 1094   125  3 48 50  0
 1  0      0 591320  39340 292228    0    0     0     0 1089   122  2 49 50  0
 1  0      0 591320  39340 292228    0    0     0     0 1091   129  3 48 49  0
 1  0      0 591320  39340 292228    0    0     0     0 1091   118  3 48 50  0
 1  0      0 591320  39340 292228    0    0     0     0 1090   120  2 49 50  0
procs -----------memory---------- ---swap-- -----io---- --system-- ----cpu----
 r  b   swpd   free   buff  cache   si   so    bi    bo   in    cs us sy id wa
 2  0      0 591304  39340 292228    0    0     0    16 1092   134  3 48 50  0
 1  0      0 591304  39340 292228    0    0     0     0 1090   116  2 48 49  0
 1  0      0 591304  39340 292228    0    0     0     0 1089   125  2 48 49  0
 1  0      0 591304  39340 292228    0    0     0     0 1090   112  3 48 49  0
 1  0      0 591304  39340 292228    0    0     0     0 1091   114  3 48 50  0
 1  0      0 591304  39340 292228    0    0     0    16 1092   132  2 48 49  0
 1  0      0 591288  39340 292228    0    0     0     0 1089   131  2 49 50  0
 1  0      0 591288  39340 292228    0    0     0     0 1092   132  3 48 49  0
 1  0      0 591288  39340 292228    0    0     0     0 1089   111  3 48 50  0
 1  0      0 591288  39340 292228    0    0     0     0 1091   117  3 48 49  0
 1  0      0 591288  39340 292228    0    0     0    16 1093   130  3 48 50  0
 1  0      0 591288  39340 292228    0    0     0     0 1089   129  2 48 49  0
 1  0      0 591288  39340 292228    0    0     0     0 1089   122  3 48 49  0
 1  0      0 591288  39340 292228    0    0     0     0 1090   113  2 49 49  0
 1  0      0 591288  39340 292228    0    0     0     0 1091   109  3 48 50  0
 1  0      0 591288  39340 292228    0    0     0    16 1092   120  2 48 49  0
 1  0      0 591288  39340 292228    0    0     0     0 1090   117  2 49 50  0
 1  0      0 591288  39340 292228    0    0     0     0 1091   126  2 49 49  0
 1  0      0 591288  39340 292228    0    0     0     0 1090   122  3 48 50  0
 2  1      0 591288  39340 292228    0    0     0     8 1091   124  2 49 50  0
 1  0      0 591288  39340 292228    0    0     0     8 1093   121  2 49 50  0
 1  0      0 591288  39340 292228    0    0     0     0 1089   126  2 49 49  0
 1  0      0 591288  39340 292228    0    0     0     0 1091   123  2 48 50  0
 1  0      0 591288  39340 292228    0    0     0     0 1089   114  2 48 49  0
 1  0      0 591288  39340 292228    0    0     0    12 1092   135  3 48 50  0
 1  0      0 591288  39340 292228    0    0     0     4 1092   121  2 49 49  0
 1  0      0 591288  39340 292228    0    0     0     0 1089   127  2 48 50  0
 1  0      0 591288  39340 292228    0    0     0     0 1091   126  2 49 50  0
 1  0      0 591288  39340 292228    0    0     0     0 1090   112  3 48 49  0
 1  0      0 591288  39340 292228    0    0     0    12 1092   136  2 48 49  0
 1  0      0 591288  39340 292228    0    0     0     4 1090   124  2 49 49  0
procs -----------memory---------- ---swap-- -----io---- --system-- ----cpu----
 r  b   swpd   free   buff  cache   si   so    bi    bo   in    cs us sy id wa
 2  0      0 591288  39340 292228    0    0     0     0 1091   129  2 48 49  0
 1  0      0 591288  39340 292228    0    0     0     0 1089   124  2 49 50  0
 1  0      0 591288  39340 292228    0    0     0     0 1089   111  2 49 49  0
 1  0      0 591288  39340 292228    0    0     0    12 1093   121  3 48 50  0
 1  0      0 591288  39340 292228    0    0     0     4 1090   113  3 48 50  0
 1  0      0 591288  39340 292228    0    0     0     0 1090   131  3 48 50  0
 1  0      0 591288  39340 292228    0    0     0     0 1092   134  1 49 49  0
 1  0      0 591288  39340 292228    0    0     0     0 1089   120  2 49 50  0
 1  0      0 591288  39340 292228    0    0     0    12 1092   129  2 49 49  0
 1  0      0 591288  39340 292228    0    0     0     4 1091   118  3 48 49  0
 1  0      0 591288  39340 292228    0    0     0     0 1089   124  2 49 49  0
 1  0      0 591288  39340 292228    0    0     0     0 1090   125  3 48 50  0
 1  0      0 591288  39340 292228    0    0     0     0 1091   130  4 47 50  0
 1  0      0 591288  39340 292228    0    0     0    20 1093   130  2 49 49  0
 1  0      0 591288  39340 292228    0    0     0     4 1091   118  2 48 49  0
 1  0      0 591288  39340 292228    0    0     0     0 1091   134  3 48 50  0
 1  0      0 591288  39340 292228    0    0     0     0 1092   127  3 48 50  0
 1  0      0 591288  39340 292228    0    0     0     0 1091   126  3 49 49  0
 1  0      0 591288  39340 292228    0    0     0    20 1093   134  3 47 49  0
 1  0      0 591288  39340 292228    0    0     0     4 1090   128  4 47 49  0
 1  0      0 591288  39340 292228    0    0     0     0 1090   126  3 47 50  0
 1  0      0 591288  39340 292228    0    0     0     0 1089   121  2 50 49  0
 1  0      0 591288  39340 292228    0    0     0     0 1091   112  2 49 50  0
 1  0      0 591288  39340 292228    0    0     0    16 1096   125  2 49 49  0
 1  0      0 591288  39340 292228    0    0     0     0 1090   109  3 48 50  0
 1  0      0 591288  39340 292228    0    0     0     0 1091   118  2 49 49  0
 1  0      0 591288  39340 292228    0    0     0     0 1093   125  2 48 49  0
 1  0      0 591288  39340 292228    0    0     0     0 1090   112  3 48 50  0
 1  0      0 591288  39340 292228    0    0     0    12 1093   126  2 49 49  0
 1  0      0 591288  39340 292228    0    0     0     4 1093   114  3 48 50  0
 1  0      0 591288  39340 292228    0    0     0     0 1090   120  2 49 50  0
procs -----------memory---------- ---swap-- -----io---- --system-- ----cpu----
 r  b   swpd   free   buff  cache   si   so    bi    bo   in    cs us sy id wa
 2  0      0 591288  39340 292228    0    0     0     0 1090   119  2 48 49  0
 1  0      0 591288  39340 292228    0    0     0     0 1091   108  2 48 49  0
 1  0      0 591288  39340 292228    0    0     0    12 1093   117  2 48 49  0
 1  0      0 591288  39340 292228    0    0     0     4 1091   111  3 48 50  0
 1  0      0 591288  39340 292228    0    0     0     0 1091   118  3 48 50  0
 1  0      0 591288  39340 292228    0    0     0     0 1092   122  3 48 49  0
 1  0      0 591288  39340 292228    0    0     0     0 1091   109  2 49 50  0
 1  0      0 591288  39340 292228    0    0     0    16 1095   125  3 48 50  0
 1  0      0 591288  39340 292228    0    0     0     0 1090   110  2 49 49  0
 1  0      0 591288  39340 292228    0    0     0     0 1091   120  3 48 49  0
 1  0      0 591288  39340 292228    0    0     0     0 1090   117  2 49 50  0
 1  0      0 591288  39340 292228    0    0     0     0 1090   110  3 48 50  0
 1  0      0 591288  39340 292228    0    0     0    16 1095   121  2 49 50  0
 1  0      0 591288  39340 292228    0    0     0     0 1092   109  2 49 49  0
 1  0      0 591288  39340 292228    0    0     0     0 1090   120  2 48 49  0
 1  0      0 591288  39340 292228    0    0     0     0 1093   123  2 49 50  0
 1  0      0 591288  39340 292228    0    0     0     0 1091   110  2 48 49  0
 2  0      0 591288  39340 292228    0    0     0    16 1095   128  2 48 49  0
 1  0      0 591288  39340 292228    0    0     0     0 1090   117  2 49 50  0
 1  0      0 591288  39340 292228    0    0     0     0 1091   116  2 48 49  0
 1  0      0 591288  39340 292228    0    0     0     0 1090   124  2 49 49  0
 1  0      0 591288  39340 292228    0    0     0     0 1091   108  3 48 50  0
 1  0      0 591288  39340 292228    0    0     0    16 1095   131  2 48 49  0
 1  0      0 591288  39340 292228    0    0     0     0 1090   112  3 48 50  0
 1  0      0 591288  39340 292228    0    0     0     0 1091   120  3 48 49  0
 1  0      0 591288  39340 292228    0    0     0     0 1093   129  2 49 49  0
 1  0      0 591288  39340 292228    0    0     0     0 1090   114  3 48 50  0
 1  0      0 591288  39340 292228    0    0     0    20 1095   134  2 49 49  0
 1  0      0 591288  39340 292228    0    0     0     0 1092   114  2 49 50  0
 1  0      0 591288  39340 292228    0    0     0     0 1090   116  2 48 49  0
 1  0      0 591288  39340 292228    0    0     0     0 1090   119  2 49 50  0
procs -----------memory---------- ---swap-- -----io---- --system-- ----cpu----
 r  b   swpd   free   buff  cache   si   so    bi    bo   in    cs us sy id wa
 2  0      0 591288  39340 292228    0    0     0     0 1091   114  2 49 50  0
 1  0      0 591288  39340 292228    0    0     0    16 1095   128  2 49 49  0
 1  0      0 591288  39340 292228    0    0     0     0 1089   112  2 48 49  0
 1  0      0 591288  39340 292228    0    0     0     0 1090   116  2 49 50  0
 1  0      0 591288  39340 292228    0    0     0     0 1091   121  3 48 50  0
 1  0      0 590792  39340 292228    0    0     0     0 1089   124  8 43 49  0
 1  0      0 590792  39340 292228    0    0     0    16 1095   137  4 47 50  0
 1  0      0 590792  39340 292228    0    0     0     0 1089   117  3 48 49  0
 1  0      0 590792  39340 292228    0    0     0     0 1089   122  3 48 49  0
 1  0      0 590792  39340 292228    0    0     0     0 1091   117  3 48 50  0
 1  0      0 590792  39340 292228    0    0     0     0 1089   108  2 48 50  0
 1  0      0 590792  39340 292228    0    0     0    16 1094   122  3 48 49  0
 1  0      0 590792  39340 292228    0    0     0     0 1090   115  2 49 50  0
 1  0      0 590792  39340 292228    0    0     0     0 1090   132  2 48 49  0
 1  0      0 590792  39340 292228    0    0     0     0 1091   124  3 48 50  0
 1  0      0 590792  39340 292228    0    0     0     0 1090   118  2 48 49  0
 1  0      0 590792  39340 292228    0    0     0    24 1094   124  2 49 49  0
 1  0      0 590792  39340 292228    0    0     0     0 1090   113  3 48 49  0
 1  0      0 590792  39340 292228    0    0     0     0 1090   116  2 48 50  0
 1  0      0 590792  39340 292228    0    0     0     0 1089   123  2 49 49  0
 1  0      0 590792  39340 292228    0    0     0     0 1089   116  2 49 50  0
 1  0      0 590792  39340 292228    0    0     0    16 1113   153  3 48 49  0
 1  0      0 590792  39340 292228    0    0     0     0 1275   349  3 49 49  0
 1  0      0 590776  39340 292228    0    0     0     0 1089   123  2 49 50  0
 1  0      0 590776  39340 292228    0    0     0     0 1092   117  2 49 50  0
 1  0      0 590776  39340 292228    0    0     0     0 1089   123  3 48 49  0
 1  0      0 590776  39340 292228    0    0     0    16 1093   139  3 48 50  0
 1  0      0 590776  39340 292228    0    0     0     0 1090   113  2 49 50  0
 1  0      0 590776  39340 292228    0    0     0     0 1090   121  2 49 49  0
 1  0      0 590776  39340 292228    0    0     0     0 1089   110  1 49 50  0
 1  0      0 590776  39340 292228    0    0     0     0 1090   108  3 48 50  0
procs -----------memory---------- ---swap-- -----io---- --system-- ----cpu----
 r  b   swpd   free   buff  cache   si   so    bi    bo   in    cs us sy id wa
 2  0      0 590792  39340 292228    0    0     0    16 1093   130  3 48 49  0
 1  0      0 590792  39340 292228    0    0     0     0 1089   118  2 49 50  0
 1  0      0 590792  39340 292228    0    0     0     0 1091   131  1 49 50  0
 1  0      0 590792  39340 292228    0    0     0     0 1091   118  2 49 50  0
 1  0      0 590792  39340 292228    0    0     0     0 1089   112  3 48 50  0
 1  0      0 590792  39340 292228    0    0     0    16 1094   130  2 48 49  0
 1  0      0 590792  39340 292228    0    0     0     0 1090   116  3 48 50  0
 1  0      0 590792  39340 292228    0    0     0     0 1090   135  2 49 50  0
 1  0      0 590792  39340 292228    0    0     0     0 1091   114  2 49 50  0
 1  0      0 590792  39340 292228    0    0     0     0 1089   109  2 48 50  0
 1  0      0 590792  39340 292228    0    0     0    16 1093   124  2 49 50  0
 1  0      0 590792  39340 292228    0    0     0     0 1090   113  3 48 49  0
 1  0      0 590792  39340 292228    0    0     0     0 1089   133  2 48 50  0
 1  0      0 590792  39340 292228    0    0     0     0 1092   126  2 49 49  0
 1  0      0 590792  39340 292228    0    0     0     0 1090   120  3 48 50  0
 1  0      0 590792  39340 292228    0    0     0    16 1093   124  2 48 49  0
 1  0      0 590792  39340 292228    0    0     0     0 1089   113  2 49 50  0
 1  0      0 590792  39340 292228    0    0     0     0 1090   124  3 48 50  0
 1  0      0 590792  39340 292228    0    0     0     0 1090   111  3 48 50  0
 1  0      0 590792  39340 292228    0    0     0     0 1090   113  2 49 49  0
 1  0      0 590792  39340 292228    0    0     0    16 1094   135  2 48 49  0
 1  0      0 590792  39340 292228    0    0     0     0 1089   121  2 49 50  0
 1  0      0 590792  39340 292228    0    0     0     0 1089   127  2 48 50  0
 1  0      0 590792  39340 292228    0    0     0     0 1092   116  2 48 50  0
 1  0      0 590792  39340 292228    0    0     0     0 1090   112  3 48 49  0
 2  0      0 590792  39340 292228    0    0     0    16 1093   137  2 49 50  0
 1  0      0 590792  39340 292228    0    0     0     0 1090   121  2 49 50  0
 1  0      0 590792  39340 292228    0    0     0     0 1089   137  2 48 49  0
 1  0      0 590792  39340 292228    0    0     0     0 1089   112  3 48 50  0
 1  0      0 590792  39340 292228    0    0     0     0 1090   110  2 48 50  0
 1  0      0 590792  39340 292228    0    0     0    16 1094   126  2 48 49  0
procs -----------memory---------- ---swap-- -----io---- --system-- ----cpu----
 r  b   swpd   free   buff  cache   si   so    bi    bo   in    cs us sy id wa
 2  0      0 590792  39340 292228    0    0     0     0 1089   117  2 49 50  0
 1  0      0 590792  39340 292228    0    0     0     0 1090   133  2 48 50  0
 1  0      0 590792  39340 292228    0    0     0     0 1091   126  2 48 49  0
 1  0      0 590792  39340 292228    0    0     0     0 1090   116  2 49 50  0
 1  0      0 590792  39340 292228    0    0     0    16 1095   134  2 49 49  0
 1  0      0 590792  39340 292228    0    0     0     0 1089   122  2 48 50  0
 1  0      0 590792  39340 292228    0    0     0     0 1089   131  3 48 50  0
 1  0      0 590792  39340 292228    0    0     0     0 1090   120  2 49 49  0
 1  0      0 590792  39340 292228    0    0     0     0 1089   118  2 49 50  0
 1  0      0 590792  39340 292228    0    0     0    16 1093   128  2 49 50  0
 1  0      0 590792  39340 292228    0    0     0     0 1091   116  2 48 49  0
 1  0      0 590792  39340 292228    0    0     0     0 1089   136  2 48 50  0
 1  0      0 590792  39340 292228    0    0     0     0 1091   117  2 48 49  0
 1  0      0 590792  39340 292228    0    0     0     0 1090   123  2 49 50  0
 1  0      0 590792  39340 292228    0    0     0    16 1093   132  2 48 49  0
 1  0      0 590792  39340 292228    0    0     0     0 1090   122  2 49 49  0
 1  0      0 590792  39340 292228    0    0     0     0 1090   128  2 49 50  0
 1  0      0 590792  39340 292228    0    0     0     0 1089   112  2 49 50  0
 1  0      0 590792  39340 292228    0    0     0     0 1089   108  2 49 50  0
 2  0      0 590792  39340 292228    0    0     0    16 1094   132  1 49 50  0
 1  0      0 590792  39340 292228    0    0     0     0 1089   121  3 48 50  0
 1  0      0 590668  39340 292228    0    0     0     0 1090   139  2 49 50  0
 1  0      0 590668  39340 292228    0    0     0     0 1092   118  3 48 49  0
 1  0      0 590544  39340 292228    0    0     0     0 1089   112  3 48 50  0
 1  0      0 591040  39340 292228    0    0     0    16 1093   155  3 47 49  0
 0  0      0 595092  39340 292228    0    0     0     0 1102   497  3 35 62  0
#3 lore raw
Quoted 7 lines · Andreas Baer

[...]
Vmstat for Notebook P4 3.0 GHz 512 MB RAM:

procs -----------memory---------- ---swap-- -----io---- --system-- ----cpu----
r b swpd free buff cache si so bi bo in cs us sy
id wa

Quoted 5 lines
 1  0      0 179620  14812 228832    0    0    33    21  557   184  3  1 
95  1
 2  0      0 178828  14812 228832    0    0     0     0 1295   819  6  2 
92  0
 1  0      0 175948  14812 228832    0    0     0     0 1090   111 37 17 

This vmstat output doesn't show any input / output happening. Are you sure this was taken *while* your test is running? If it is, then all files are already in pagecache. The fact that you have free memory at all times, and that the run on the notebook takes less than 20 seconds confirms this.

The second takes a lot more time to execute. The 1Gb memory does make me suspicious, though.

There is a known problem with BIOS that don't set up the mtrr's correctly for the whole memory and leave a small amount of memory on the top with the wrong settings. Accessing this memory becomes painfully slow.

Can you send the output of /proc/mtrr and try to boot with something like "mem=768M" to see if that improves performance on the Desktop P4?

Signature · 5 lines
Paulo Marques - www.grupopie.com

It is a mistake to think you can solve any major problems
just with potatoes.
Douglas Adams
#4 lore raw
In reply to Andreas Baer

On Mon, Jul 25, 2005 at 03:10:08PM +0200, Andreas Baer wrote:
(...)

Quoted 9 lines

I have (S-ATA-150 Disk 80GB)

         /dev/sda:  50.59 MB/sec
         /dev/sda1: 50.62 MB/sec    (Windows FAT32)
         /dev/sda6: 41.63 MB/sec    (Linux ReiserFS)

On the Notebook I have at most an ATA-100 Disk with 80GB and it shows the same declension.

Quoted 7 lines

Here I have

         /dev/hda:  26.91 MB/sec
         /dev/hda1: 26.90 MB/sec    (Windows FAT32)
         /dev/hda7: 17.89 MB/sec    (Linux EXT3)

Could you give me a reason how this is possible?

a reason for what ? the fact that the notebook performs faster than the desktop while slower on I/O ?

Quoted 1 line

Vmstat for Notebook P4 3.0 GHz 512 MB RAM:

Your Notebook's P4 has HT enabled (50% apparent idle remain permanently during operation). But you'll note that your load is 60% system + 40% user there, and that you do absolutely no I/O (I presume it's the second run and it's cached).

Quoted 20 lines

procs -----------memory---------- ---swap-- -----io---- --system-- ----cpu----
r b swpd free buff cache si so bi bo in cs us sy
id wa
1 0 0 179620 14812 228832 0 0 33 21 557 184 3 1
95 1
2 0 0 178828 14812 228832 0 0 0 0 1295 819 6 2
92 0
1 0 0 175948 14812 228832 0 0 0 0 1090 111 37 17
46 0
1 0 0 175948 14812 228832 0 0 0 0 1064 101 23 28
50 0
1 0 0 175948 14812 228832 0 0 0 0 1066 100 20 31
49 0
1 0 0 175980 14820 228824 0 0 0 48 1066 119 20 30
50 0
1 0 0 175980 14820 228824 0 0 0 0 1067 86 19 31
50 0
1 0 0 175988 14820 228824 0 0 0 0 1064 115 20 30
50 0

(...)

Quoted 1 line

Vmstat for Desktop P4 2.4 GHz 1024 MB RAM:

This one's hyperthreaded too (apparent consumption never goes above 50%). However, while not doing any I/O either, you're always spending only 4% in user and 96% in system. This means that it might take 10x more time to complete the same operations, had it been user-cpu bound. And this is about what you observe.

There clearly is a problem on the system installed on this machine. You should use strace to see what this machine does all the time, it is absolutely not expected that the user/system ratios change so much between two nearly identical systems. So there are system calls which eat all CPU. You may want to try strace -Tttt on the running process during a few tens of seconds. I guess you'll immediately find the culprit amongst the syscalls, and it might give you a clue.

Quoted 12 lines

procs -----------memory---------- ---swap-- -----io---- --system-- ----cpu----
r b swpd free buff cache si so bi bo in cs us sy
id wa
1 0 0 594688 39340 292228 0 0 52 29 581 484 5 2
92 2
1 0 0 591208 39340 292228 0 0 0 68 1116 545 15 14
71 0
1 0 0 591208 39340 292228 0 0 0 0 1090 112 3 48
50 0
1 0 0 591208 39340 292228 0 0 0 0 1089 124 2 48
50 0

Quoted 8 lines

1 0 0 591208 39340 292228 0 0 0 0 1089 114 3 48
50 0
1 0 0 591208 39340 292228 0 0 0 0 1090 120 1 49
50 0
1 0 0 591208 39340 292228 0 0 0 24 1094 138 2 49
50 0
1 0 0 591256 39340 292228 0 0 0 0 1090 118 2 48
50 0

(...)

Regards,
Willy

#5 lore raw
Quoted 17 lines · Willy Tarreau

On Mon, Jul 25, 2005 at 03:10:08PM +0200, Andreas Baer wrote:
(...)

Quoted 14 lines

I have (S-ATA-150 Disk 80GB)

        /dev/sda:  50.59 MB/sec
        /dev/sda1: 50.62 MB/sec    (Windows FAT32)
        /dev/sda6: 41.63 MB/sec    (Linux ReiserFS)

On the Notebook I have at most an ATA-100 Disk with 80GB and it shows the same declension.

Here I have

        /dev/hda:  26.91 MB/sec
        /dev/hda1: 26.90 MB/sec    (Windows FAT32)
        /dev/hda7: 17.89 MB/sec    (Linux EXT3)
Quoted 5 lines
Quoted 1 line

Could you give me a reason how this is possible?

a reason for what ? the fact that the notebook performs faster than the desktop while slower on I/O ?

No, a reason why the partition with Linux (ReiserFS or Ext3) is always slower than the Windows partition?

Quoted 22 lines
Quoted 2 lines

Vmstat for Notebook P4 3.0 GHz 512 MB RAM:

Your Notebook's P4 has HT enabled (50% apparent idle remain permanently during operation). But you'll note that your load is 60% system + 40% user there, and that you do absolutely no I/O (I presume it's the second run and it's cached).

Quoted 11 lines

procs -----------memory---------- ---swap-- -----io---- --system-- ----cpu----

r  b   swpd   free   buff  cache   si   so    bi    bo   in    cs us sy id wa
1  0      0 179620  14812 228832    0    0    33    21  557   184  3  1 95  1
2  0      0 178828  14812 228832    0    0     0     0 1295   819  6  2 92  0
1  0      0 175948  14812 228832    0    0     0     0 1090   111 37 17 46  0
1  0      0 175948  14812 228832    0    0     0     0 1064   101 23 28 50  0
1  0      0 175948  14812 228832    0    0     0     0 1066   100 20 31 49  0
1  0      0 175980  14820 228824    0    0     0    48 1066   119 20 30 50  0
1  0      0 175980  14820 228824    0    0     0     0 1067    86 19 31 50  0
1  0      0 175988  14820 228824    0    0     0     0 1064   115 20 30 50  0
Quoted 1 line

(...)

Yeah the HT is enabled but as I said that changes nothing on the result, if I enable or diable it on the desktop machine.
Sorry about the I/O, I explained something wrong. Look below, I answered Paulo Marques to explain everything.

Quoted 11 lines
Quoted 3 lines

Vmstat for Desktop P4 2.4 GHz 1024 MB RAM:

This one's hyperthreaded too (apparent consumption never goes above 50%). However, while not doing any I/O either, you're always spending only 4% in user and 96% in system. This means that it might take 10x more time to complete the same operations, had it been user-cpu bound. And this is about what you observe.

Quoted 7 lines

There clearly is a problem on the system installed on this machine. You should use strace to see what this machine does all the time, it is absolutely not expected that the user/system ratios change so much between two nearly identical systems. So there are system calls which eat all CPU. You may want to try strace -Tttt on the running process during a few tens of seconds. I guess you'll immediately find the culprit amongst the syscalls, and it might give you a clue.

I hope you are talking about a hardware/kernel problem and not a software problem, because I tried it also with LiveCD's and they showed the same results on this machine.
I'm not a linux expert, that means I've never done anything like that before, so it would be nice if you give me a hint what you see in this results. :)

strace output for desktop:
<--snip-->
[pid 15146] 1122317366.469624 _llseek(3, 7471104, [7471104], SEEK_SET) = 0 <0.000014>
[pid 15146] 1122317366.469692 _llseek(3, 7471104, [7471104], SEEK_SET) = 0 <0.000015>
[pid 15146] 1122317366.469760 _llseek(3, 7471104, [7471104], SEEK_SET) = 0 <0.000015>
[pid 15146] 1122317366.469828 _llseek(3, 7471104, [7471104], SEEK_SET) = 0 <0.000015>
[pid 15146] 1122317366.469896 _llseek(3, 7471104, [7471104], SEEK_SET) = 0 <0.000014>
[pid 15146] 1122317366.469963 _llseek(3, 7471104, [7471104], SEEK_SET) = 0 <0.000015>
[pid 15146] 1122317366.470031 _llseek(3, 7471104, [7471104], SEEK_SET) = 0 <0.000014>
[pid 15146] 1122317366.470098 _llseek(3, 7471104, [7471104], SEEK_SET) = 0 <0.000015>
[pid 15146] 1122317366.470168 _llseek(3, 7471104, [7471104], SEEK_SET) = 0 <0.000014>
[pid 15146] 1122317366.470236 _llseek(3, 7471104, [7471104], SEEK_SET) = 0 <0.000015>
[pid 15146] 1122317366.470298 read(3, "\1\200\1\0\0\0\0\0\1\0G\247\35a\7\204\f\rP@\317\313\27"..., 131072) = 131072 <0.000138>
[pid 15146] 1122317366.470528 _llseek(3, 7602176, [7602176], SEEK_SET) = 0 <0.000015>
[pid 15146] 1122317366.470599 _llseek(3, 7602176, [7602176], SEEK_SET) = 0 <0.000014>
[pid 15146] 1122317366.470667 _llseek(3, 7602176, [7602176], SEEK_SET) = 0 <0.000015>
[pid 15146] 1122317366.470734 _llseek(3, 7602176, [7602176], SEEK_SET) = 0 <0.000014>
[pid 15146] 1122317366.470802 _llseek(3, 7602176, [7602176], SEEK_SET) = 0 <0.000014>
[pid 15146] 1122317366.470870 _llseek(3, 7602176, [7602176], SEEK_SET) = 0 <0.000014>
[pid 15146] 1122317366.470939 _llseek(3, 7602176, [7602176], SEEK_SET) = 0 <0.000014>
[pid 15146] 1122317366.471008 _llseek(3, 7602176, [7602176], SEEK_SET) = 0 <0.000014>
[pid 15146] 1122317366.471079 _llseek(3, 7602176, [7602176], SEEK_SET) = 0 <0.000016>
[pid 15146] 1122317366.471158 _llseek(3, 7602176, [7602176], SEEK_SET) = 0 <0.000015>
[pid 15146] 1122317366.471227 _llseek(3, 7602176, [7602176], SEEK_SET) = 0 <0.000014>
[pid 15146] 1122317366.471295 _llseek(3, 7602176, [7602176], SEEK_SET) = 0 <0.000014>
[pid 15146] 1122317366.471363 _llseek(3, 7602176, [7602176], SEEK_SET) = 0 <0.000020>
[pid 15146] 1122317366.471436 _llseek(3, 7602176, [7602176], SEEK_SET) = 0 <0.000014>
[pid 15146] 1122317366.471505 _llseek(3, 7602176, [7602176], SEEK_SET) = 0 <0.000014>
[pid 15146] 1122317366.471573 _llseek(3, 7602176, [7602176], SEEK_SET) = 0 <0.000014>
[pid 15146] 1122317366.471641 _llseek(3, 7602176, [7602176], SEEK_SET) = 0 <0.000015>
[pid 15146] 1122317366.471708 _llseek(3, 7602176, [7602176], SEEK_SET) = 0 <0.000015>
[pid 15146] 1122317366.471776 _llseek(3, 7602176, [7602176], SEEK_SET) = 0 <0.000015>
[pid 15146] 1122317366.471844 _llseek(3, 7602176, [7602176], SEEK_SET) = 0 <0.000017>
[pid 15146] 1122317366.471915 _llseek(3, 7602176, [7602176], SEEK_SET) = 0 <0.000016>
[pid 15146] 1122317366.471991 _llseek(3, 7602176, [7602176], SEEK_SET) = 0 <0.000014>
[pid 15146] 1122317366.472058 _llseek(3, 7602176, [7602176], SEEK_SET) = 0 <0.000015>
<--snip-->

strace output for notebook:
<--snip-->
[pid 1431] 1122318636.262024 _llseek(3, 1757184, [1757184], SEEK_SET) = 0 <0.000017>
[pid 1431] 1122318636.262098 _llseek(3, 1757184, [1757184], SEEK_SET) = 0 <0.000016>
[pid 1431] 1122318636.262173 _llseek(3, 1757184, [1757184], SEEK_SET) = 0 <0.000016>
[pid 1431] 1122318636.262247 _llseek(3, 1757184, [1757184], SEEK_SET) = 0 <0.000016>
[pid 1431] 1122318636.262321 _llseek(3, 1757184, [1757184], SEEK_SET) = 0 <0.000016>
[pid 1431] 1122318636.262396 _llseek(3, 1757184, [1757184], SEEK_SET) = 0 <0.000016>
[pid 1431] 1122318636.262465 read(3, "\0\0\0\0\0\0\0\0\0\0\0\0RZ\0\0\0\0\0\0\1\0G\247\252\333"..., 4096) = 4096 <0.000024>
[pid 1431] 1122318636.262578 _llseek(3, 1761280, [1761280], SEEK_SET) = 0 <0.000017>
[pid 1431] 1122318636.262654 _llseek(3, 1761280, [1761280], SEEK_SET) = 0 <0.000017>
[pid 1431] 1122318636.262732 _llseek(3, 1761280, [1761280], SEEK_SET) = 0 <0.000017>
[pid 1431] 1122318636.262809 _llseek(3, 1761280, [1761280], SEEK_SET) = 0 <0.000015>
[pid 1431] 1122318636.262881 _llseek(3, 1761280, [1761280], SEEK_SET) = 0 <0.000015>
[pid 1431] 1122318636.262952 _llseek(3, 1761280, [1761280], SEEK_SET) = 0 <0.000015>
[pid 1431] 1122318636.263023 _llseek(3, 1761280, [1761280], SEEK_SET) = 0 <0.000015>
[pid 1431] 1122318636.263094 _llseek(3, 1761280, [1761280], SEEK_SET) = 0 <0.000016>
[pid 1431] 1122318636.263165 _llseek(3, 1761280, [1761280], SEEK_SET) = 0 <0.000015>
[pid 1431] 1122318636.263237 _llseek(3, 1761280, [1761280], SEEK_SET) = 0 <0.000016>
[pid 1431] 1122318636.263310 _llseek(3, 1761280, [1761280], SEEK_SET) = 0 <0.000015>
[pid 1431] 1122318636.263381 _llseek(3, 1761280, [1761280], SEEK_SET) = 0 <0.000015>
[pid 1431] 1122318636.263452 _llseek(3, 1761280, [1761280], SEEK_SET) = 0 <0.000015>
[pid 1431] 1122318636.263523 _llseek(3, 1761280, [1761280], SEEK_SET) = 0 <0.000016>
[pid 1431] 1122318636.263594 _llseek(3, 1761280, [1761280], SEEK_SET) = 0 <0.000015>
[pid 1431] 1122318636.263666 _llseek(3, 1761280, [1761280], SEEK_SET) = 0 <0.000017>
[pid 1431] 1122318636.263740 _llseek(3, 1761280, [1761280], SEEK_SET) = 0 <0.000024>
[pid 1431] 1122318636.263841 _llseek(3, 1761280, [1761280], SEEK_SET) = 0 <0.000015>
[pid 1431] 1122318636.263913 _llseek(3, 1761280, [1761280], SEEK_SET) = 0 <0.000015>
[pid 1431] 1122318636.263984 _llseek(3, 1761280, [1761280], SEEK_SET) = 0 <0.000014>
[pid 1431] 1122318636.264055 _llseek(3, 1761280, [1761280], SEEK_SET) = 0 <0.000015>
[pid 1431] 1122318636.264127 _llseek(3, 1761280, [1761280], SEEK_SET) = 0 <0.000015>
[pid 1431] 1122318636.264199 _llseek(3, 1761280, [1761280], SEEK_SET) = 0 <0.000015>
[pid 1431] 1122318636.264271 _llseek(3, 1761280, [1761280], SEEK_SET) = 0 <0.000015>
[pid 1431] 1122318636.264342 _llseek(3, 1761280, [1761280], SEEK_SET) = 0 <0.000016>
[pid 1431] 1122318636.264414 _llseek(3, 1761280, [1761280], SEEK_SET) = 0 <0.000016>
[pid 1431] 1122318636.264487 _llseek(3, 1761280, [1761280], SEEK_SET) = 0 <0.000015>
[pid 1431] 1122318636.264558 _llseek(3, 1761280, [1761280], SEEK_SET) = 0 <0.000016>
[pid 1431] 1122318636.264630 _llseek(3, 1761280, [1761280], SEEK_SET) = 0 <0.000015>
[pid 1431] 1122318636.264710 _llseek(3, 1761280, [1761280], SEEK_SET) = 0 <0.000015>
[pid 1431] 1122318636.264788 _llseek(3, 1761280, [1761280], SEEK_SET) = 0 <0.000016>
[pid 1431] 1122318636.264861 _llseek(3, 1761280, [1761280], SEEK_SET) = 0 <0.000015>
[pid 1431] 1122318636.264934 _llseek(3, 1761280, [1761280], SEEK_SET) = 0 <0.000016>
[pid 1431] 1122318636.265006 _llseek(3, 1761280, [1761280], SEEK_SET) = 0 <0.000015>
[pid 1431] 1122318636.265077 _llseek(3, 1761280, [1761280], SEEK_SET) = 0 <0.000015>
[pid 1431] 1122318636.265149 _llseek(3, 1761280, [1761280], SEEK_SET) = 0 <0.000014>
[pid 1431] 1122318636.265220 _llseek(3, 1761280, [1761280], SEEK_SET) = 0 <0.000015>
[pid 1431] 1122318636.265292 _llseek(3, 1761280, [1761280], SEEK_SET) = 0 <0.000016>
[pid 1431] 1122318636.265363 _llseek(3, 1761280, [1761280], SEEK_SET) = 0 <0.000016>
[pid 1431] 1122318636.265436 _llseek(3, 1761280, [1761280], SEEK_SET) = 0 <0.000015>
[pid 1431] 1122318636.265509 _llseek(3, 1761280, [1761280], SEEK_SET) = 0 <0.000015>
[pid 1431] 1122318636.265580 _llseek(3, 1761280, [1761280], SEEK_SET) = 0 <0.000015>
[pid 1431] 1122318636.265652 _llseek(3, 1761280, [1761280], SEEK_SET) = 0 <0.000016>
[pid 1431] 1122318636.265726 _llseek(3, 1761280, [1761280], SEEK_SET) = 0 <0.000017>
[pid 1431] 1122318636.265818 _llseek(3, 1761280, [1761280], SEEK_SET) = 0 <0.000015>
[pid 1431] 1122318636.265891 _llseek(3, 1761280, [1761280], SEEK_SET) = 0 <0.000015>
[pid 1431] 1122318636.265963 _llseek(3, 1761280, [1761280], SEEK_SET) = 0 <0.000015>
[pid 1431] 1122318636.266034 _llseek(3, 1761280, [1761280], SEEK_SET) = 0 <0.000015>
[pid 1431] 1122318636.266106 _llseek(3, 1761280, [1761280], SEEK_SET) = 0 <0.000015>
[pid 1431] 1122318636.266177 _llseek(3, 1761280, [1761280], SEEK_SET) = 0 <0.000016>
[pid 1431] 1122318636.266250 _llseek(3, 1761280, [1761280], SEEK_SET) = 0 <0.000016>
[pid 1431] 1122318636.266322 _llseek(3, 1761280, [1761280], SEEK_SET) = 0 <0.000015>
[pid 1431] 1122318636.266394 _llseek(3, 1761280, [1761280], SEEK_SET) = 0 <0.000015>
[pid 1431] 1122318636.266466 _llseek(3, 1761280, [1761280], SEEK_SET) = 0 <0.000016>
[pid 1431] 1122318636.266534 read(3, "\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\210Z\0\0\0\0\0"..., 4096) = 4096 <0.000022>
[pid 1431] 1122318636.266641 _llseek(3, 1765376, [1765376], SEEK_SET) = 0 <0.000016>
[pid 1431] 1122318636.266715 _llseek(3, 1765376, [1765376], SEEK_SET) = 0 <0.000015>
[pid 1431] 1122318636.266800 _llseek(3, 1765376, [1765376], SEEK_SET) = 0 <0.000016>
[pid 1431] 1122318636.266875 _llseek(3, 1765376, [1765376], SEEK_SET) = 0 <0.000016>
[pid 1431] 1122318636.266949 _llseek(3, 1765376, [1765376], SEEK_SET) = 0 <0.000016>
[pid 1431] 1122318636.267023 _llseek(3, 1765376, [1765376], SEEK_SET) = 0 <0.000016>
<--snip-->

These are just snips of billions of lines...
The crazy things is, that the read operation takes only 0.000022 on the notebook and 0.000138 on the desktop, also there are a LOT more _llseek operations between each read operation (to much to list them) on the desktop but one possible reason is that I didn't catch the same area of processing lines... (it scrolls much too fast)

Quoted 14 lines
Quoted 12 lines

procs -----------memory---------- ---swap-- -----io---- --system-- ----cpu----

r  b   swpd   free   buff  cache   si   so    bi    bo   in    cs us sy id wa
1  0      0 594688  39340 292228    0    0    52    29  581   484  5  2 92  2
1  0      0 591208  39340 292228    0    0     0    68 1116   545 15 14 71  0
1  0      0 591208  39340 292228    0    0     0     0 1090   112  3 48 50  0
1  0      0 591208  39340 292228    0    0     0     0 1089   124  2 48 50  0
1  0      0 591208  39340 292228    0    0     0     0 1089   114  3 48 50  0
1  0      0 591208  39340 292228    0    0     0     0 1090   120  1 49 50  0
1  0      0 591208  39340 292228    0    0     0    24 1094   138  2 49 50  0
1  0      0 591256  39340 292228    0    0     0     0 1090   118  2 48 50  0
Quoted 24 lines

(...)

Regards,
Willy

Quoted 17 lines · Paulo Marques
Quoted 12 lines · Andreas Baer

[...]
Vmstat for Notebook P4 3.0 GHz 512 MB RAM:

procs -----------memory---------- ---swap-- -----io---- --system-- ----cpu----
r b swpd free buff cache si so bi bo in cs us
sy id wa
1 0 0 179620 14812 228832 0 0 33 21 557 184 3
1 95 1
2 0 0 178828 14812 228832 0 0 0 0 1295 819 6
2 92 0
1 0 0 175948 14812 228832 0 0 0 0 1090 111 37 17

This vmstat output doesn't show any input / output happening. Are you sure this was taken *while* your test is running? If it is, then all files are already in pagecache. The fact that you have free memory at all times, and that the run on the notebook takes less than 20 seconds confirms this.

I haven't said that there is any data loaded from files DURING the operation (sorry for this). Random access files are used, but not for this process. What I do is building up a r-tree index structure to get faster access to the stored data, but everything is currently done completely in memory.

Quoted 5 lines
Quoted 5 lines

The second takes a lot more time to execute. The 1Gb memory does make me suspicious, though.

There is a known problem with BIOS that don't set up the mtrr's correctly for the whole memory and leave a small amount of memory on the top with the wrong settings. Accessing this memory becomes painfully slow.

Can you send the output of /proc/mtrr and try to boot with something like "mem=768M" to see if that improves performance on the Desktop P4?

w/o "mem=768M":
---------------

$ cat /proc/mtrr
reg00: base=0x00000000 (   0MB), size=1024MB: write-back, count=1
reg01: base=0xc0000000 (3072MB), size= 256MB: write-combining, count=1
reg02: base=0xe0000000 (3584MB), size= 256MB: write-combining, count=1
$ cat /proc/meminfo | grep MemTotal
MemTotal:      1033620 kB

with "mem=768M":
----------------

$ cat /proc/mtrr
reg00: base=0x00000000 (   0MB), size=1024MB: write-back, count=1
reg01: base=0xc0000000 (3072MB), size= 256MB: write-combining, count=1
reg02: base=0xe0000000 (3584MB), size= 256MB: write-combining, count=1
$ cat /proc/meminfo | grep MemTotal
MemTotal:       775116 kB

The speed didn't get any better through this change.

Just for information, here my kernel options for memory size...
High Memory Support (off)
[*] 1Gb Low Memory Support

============================================================================

Another thing is that the ACPI does not seem to work properly on this board.

$ acpi -V
No support for device type: battery
No support for device type: thermal
No support for device type: ac_adapter
$ dmesg | grep ACPI
 BIOS-e820: 000000003ff30000 - 000000003ff40000 (ACPI data)
 BIOS-e820: 000000003ff40000 - 000000003fff0000 (ACPI NVS)
ACPI: RSDP (v002 ACPIAM                                ) @ 0x000f9e30
ACPI: XSDT (v001 A M I  OEMXSDT  0x10000412 MSFT 0x00000097) @ 0x3ff30100
ACPI: FADT (v003 A M I  OEMFACP  0x10000412 MSFT 0x00000097) @ 0x3ff30290
ACPI: MADT (v001 A M I  OEMAPIC  0x10000412 MSFT 0x00000097) @ 0x3ff30390
ACPI: OEMB (v001 A M I  OEMBIOS  0x10000412 MSFT 0x00000097) @ 0x3ff40040
ACPI: DSDT (v001  P4C81 P4C81106 0x00000106 INTL 0x02002026) @ 0x00000000
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
ACPI: IRQ0 used by override.
ACPI: IRQ2 used by override.
ACPI: IRQ9 used by override.
Using ACPI (MADT) for SMP configuration information
ACPI: Subsystem revision 20050309
ACPI: Interpreter enabled
ACPI: Using IOAPIC for interrupt routing
ACPI: PCI Root Bridge [PCI0] (0000:00)
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P4._PRT]
ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 *5 6 7 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKD] (IRQs *3 4 5 6 7 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKE] (IRQs 3 *4 5 6 7 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 *7 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 *10 11 12 14 15)
PCI: Using ACPI for IRQ routing
ACPI: PCI Interrupt 0000:02:05.0[A] -> GSI 22 (level, low) -> IRQ 22
ACPI: PCI Interrupt 0000:02:05.0[A] -> GSI 22 (level, low) -> IRQ 22
ACPI: PCI Interrupt 0000:00:1f.1[A] -> GSI 18 (level, low) -> IRQ 18
ACPI: PCI Interrupt 0000:00:1f.2[A] -> GSI 18 (level, low) -> IRQ 18
ACPI: PCI Interrupt 0000:00:1d.7[D] -> GSI 23 (level, low) -> IRQ 23
ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 16 (level, low) -> IRQ 16
ACPI: PCI Interrupt 0000:00:1d.1[B] -> GSI 19 (level, low) -> IRQ 19
ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 18 (level, low) -> IRQ 18
ACPI: PCI Interrupt 0000:00:1d.3[A] -> GSI 16 (level, low) -> IRQ 16
ACPI: PCI Interrupt 0000:01:00.0[A] -> GSI 16 (level, low) -> IRQ 16
ACPI: PCI Interrupt 0000:02:0c.0[A] -> GSI 20 (level, low) -> IRQ 20

but I'm not the only one...

http://forums.gentoo.org/viewtopic-t-215898-highlight-p4c800.html

#6 lore raw
Quoted 5 lines · Andreas Baer
Quoted 2 lines

a reason for what ? the fact that the notebook performs faster than the desktop while slower on I/O ?

No, a reason why the partition with Linux (ReiserFS or Ext3) is always slower than the Windows partition?

My first guess is that ReiserFS and EXT3 are journalled, and FAT32 isn't. Try ext2, which is the non-journalled variant of ext3, and see if the speed is comparable to fat32.

#7 lore raw
In reply to Andreas Baer
Quoted 8 lines · Andreas Baer
Quoted 8 lines
Quoted 8 lines

Here I have

        /dev/hda:  26.91 MB/sec
        /dev/hda1: 26.90 MB/sec    (Windows FAT32)
        /dev/hda7: 17.89 MB/sec    (Linux EXT3)
Quoted 9 lines
Quoted 5 lines
Quoted 1 line

Could you give me a reason how this is possible?

a reason for what ? the fact that the notebook performs faster than the desktop while slower on I/O ?

No, a reason why the partition with Linux (ReiserFS or Ext3) is always slower than the Windows partition?

Because of geometry issues hard drive can't not deliver constant data rate off the plates. Your windows partition is on "faster" part of the drive.

Signature · 1 line
Dmitry
#8 lore raw
In reply to Andreas Baer
Quoted 12 lines · Andreas Baer
Quoted 10 lines · Willy Tarreau
Quoted 7 lines · Andreas Baer

Here I have

       /dev/hda:  26.91 MB/sec
       /dev/hda1: 26.90 MB/sec    (Windows FAT32)
       /dev/hda7: 17.89 MB/sec    (Linux EXT3)

Could you give me a reason how this is possible?

Quoted 6 lines
Quoted 2 lines

a reason for what ? the fact that the notebook performs faster than the desktop while slower on I/O ?

No, a reason why the partition with Linux (ReiserFS or Ext3) is always slower
than the Windows partition?

Easy: Drives don't have the same speed on all tracks. The platters are built-up from zones with different recording densities: zones near the center of the platters have a lower recording density and hence a lower datarate (less bits/second pass under the head). Zones at the outer diameter have a higher recording density and a higher datarate.

Erik

Signature · 3 lines
+-- Erik Mouw -- www.harddisk-recovery.nl -- 0800 220 20 20 --
| Lab address: Delftechpark 26, 2628 XH, Delft, The Netherlands
| Data lost? Stay calm and contact Harddisk-recovery.com
#9 lore raw
Quoted 22 lines · Erik Mouw
Quoted 10 lines · Andreas Baer
Quoted 8 lines · Willy Tarreau
Quoted 6 lines · Andreas Baer

Here I have

      /dev/hda:  26.91 MB/sec
      /dev/hda1: 26.90 MB/sec    (Windows FAT32)
      /dev/hda7: 17.89 MB/sec    (Linux EXT3)
Quoted 8 lines
Quoted 5 lines
Quoted 1 line

Could you give me a reason how this is possible?

a reason for what ? the fact that the notebook performs faster than the desktop while slower on I/O ?

No, a reason why the partition with Linux (ReiserFS or Ext3) is always slower than the Windows partition?

Quoted 9 lines

Easy: Drives don't have the same speed on all tracks. The platters are built-up from zones with different recording densities: zones near the center of the platters have a lower recording density and hence a lower datarate (less bits/second pass under the head). Zones at the outer diameter have a higher recording density and a higher datarate.

Erik

So it has definitely nothing to do with filesystem? I also thought about physical reasons because I don't think the hdparm depends on filesystems...

#10 lore raw
Quoted 9 lines · Andreas Baer
Quoted 5 lines · Erik Mouw

Easy: Drives don't have the same speed on all tracks. The platters are built-up from zones with different recording densities: zones near the center of the platters have a lower recording density and hence a lower datarate (less bits/second pass under the head). Zones at the outer diameter have a higher recording density and a higher datarate.

So it has definitely nothing to do with filesystem? I also thought about physical reasons because I don't think the hdparm depends on filesystems...

That's right, hdparm doesn't care about filesystems. The speed difference is caused by the physical geometry of the drive.

Erik

Signature · 2 lines
+-- Erik Mouw -- www.harddisk-recovery.com -- +31 70 370 12 90 --
| Lab address: Delftechpark 26, 2628 XH, Delft, The Netherlands
#11 lore raw
In reply to Erik Mouw
Quoted 20 lines · Erik Mouw
Quoted 12 lines · Andreas Baer
Quoted 10 lines · Willy Tarreau
Quoted 7 lines · Andreas Baer

Here I have

       /dev/hda:  26.91 MB/sec
       /dev/hda1: 26.90 MB/sec    (Windows FAT32)
       /dev/hda7: 17.89 MB/sec    (Linux EXT3)

Could you give me a reason how this is possible?

Quoted 6 lines
Quoted 2 lines

a reason for what ? the fact that the notebook performs faster than the desktop while slower on I/O ?

No, a reason why the partition with Linux (ReiserFS or Ext3) is always slower
than the Windows partition?

Quoted 6 lines

Easy: Drives don't have the same speed on all tracks. The platters are built-up from zones with different recording densities: zones near the center of the platters have a lower recording density and hence a lower datarate (less bits/second pass under the head). Zones at the outer diameter have a higher recording density and a higher datarate.

It's even more complex than that as far as I know, you also have the issue of seek times - tracks near the middle of the platter will be nearer the head more often (on average) then tracks at the edge.

For people who like visuals, IBM has a nice little picture in their AIX performance tuning guide :
http://publib.boulder.ibm.com/infocenter/pseries/index.jsp?topic=/com.ibm.aix.doc/aixbman/prftungd/diskperf2.htm

Signature · 3 lines
Jesper Juhl <[email protected]>
Don't top-post  http://www.catb.org/~esr/jargon/html/T/top-post.html
Plain text mails only, please      http://www.expita.com/nomime.html
#12 lore raw
Quoted 7 lines · Jesper Juhl

It's even more complex than that as far as I know, you also have the issue of seek times - tracks near the middle of the platter will be nearer the head more often (on average) then tracks at the edge.

For people who like visuals, IBM has a nice little picture in their AIX performance tuning guide :
http://publib.boulder.ibm.com/infocenter/pseries/index.jsp?topic=/com.ibm.aix.doc/aixbman/prftungd/diskperf2.htm

Quote from that document:

"Data is more dense as it moves toward the center, resulting in less
physical movement of the head. This results in faster overall throughput"

This is not true. The whole idea of different recording zones with different sectors/track is to keep the overall data density (in bits/square mm) more or less constant.

I'd say it's even the other way around from what IBM pictures: there are more sectors/track in outer zones, so that means there is simply more data in the outer zones. If you want less physical movement of the head, you should make sure the data is in the zone(s) with the largest number of sectors/track.

Erik

Signature · 2 lines
+-- Erik Mouw -- www.harddisk-recovery.com -- +31 70 370 12 90 --
| Lab address: Delftechpark 26, 2628 XH, Delft, The Netherlands
#13 lore raw
In reply to Andreas Baer

One other oddment about this motherboard, Forgive if I have over-snipped this trying to make it relevant...

Quoted 14 lines · Andreas Baer
Quoted 9 lines · Willy Tarreau

On Mon, Jul 25, 2005 at 03:10:08PM +0200, Andreas Baer wrote:

There clearly is a problem on the system installed on this machine. You should use strace to see what this machine does all the time, it is absolutely not expected that the user/system ratios change so much between two nearly identical systems. So there are system calls which eat all CPU. You may want to try strace -Tttt on the running process during a few tens of seconds. I guess you'll immediately find the culprit amongst the syscalls, and it might give you a clue.

Quoted 6 lines

I hope you are talking about a hardware/kernel problem and not a software problem, because I tried it also with LiveCD's and they showed the same results on this machine.
I'm not a linux expert, that means I've never done anything like that before, so it would be nice if you give me a hint what you see in this results. :)

Am I misreading this, or is your program doing a bunch of seeks not followed by an i/o operation? I would doubt that's important, but your vmstat showed a lot of system time, and I just wonder if llseek() is more expensive in Linux than Windows. Or if your code is such that these calls are not optimized away by gcc.

Quoted 57 lines

strace output for desktop:
<--snip-->

[pid  1431] 1122318636.262578 _llseek(3, 1761280, [1761280], SEEK_SET) = 0 <0.000017>
[pid  1431] 1122318636.262654 _llseek(3, 1761280, [1761280], SEEK_SET) = 0 <0.000017>
[pid  1431] 1122318636.262732 _llseek(3, 1761280, [1761280], SEEK_SET) = 0 <0.000017>
[pid  1431] 1122318636.262809 _llseek(3, 1761280, [1761280], SEEK_SET) = 0 <0.000015>
[pid  1431] 1122318636.262881 _llseek(3, 1761280, [1761280], SEEK_SET) = 0 <0.000015>
[pid  1431] 1122318636.262952 _llseek(3, 1761280, [1761280], SEEK_SET) = 0 <0.000015>
[pid  1431] 1122318636.263023 _llseek(3, 1761280, [1761280], SEEK_SET) = 0 <0.000015>
[pid  1431] 1122318636.263094 _llseek(3, 1761280, [1761280], SEEK_SET) = 0 <0.000016>
[pid  1431] 1122318636.263165 _llseek(3, 1761280, [1761280], SEEK_SET) = 0 <0.000015>
[pid  1431] 1122318636.263237 _llseek(3, 1761280, [1761280], SEEK_SET) = 0 <0.000016>
[pid  1431] 1122318636.263310 _llseek(3, 1761280, [1761280], SEEK_SET) = 0 <0.000015>
[pid  1431] 1122318636.263381 _llseek(3, 1761280, [1761280], SEEK_SET) = 0 <0.000015>
[pid  1431] 1122318636.263452 _llseek(3, 1761280, [1761280], SEEK_SET) = 0 <0.000015>
[pid  1431] 1122318636.263523 _llseek(3, 1761280, [1761280], SEEK_SET) = 0 <0.000016>
[pid  1431] 1122318636.263594 _llseek(3, 1761280, [1761280], SEEK_SET) = 0 <0.000015>
[pid  1431] 1122318636.263666 _llseek(3, 1761280, [1761280], SEEK_SET) = 0 <0.000017>
[pid  1431] 1122318636.263740 _llseek(3, 1761280, [1761280], SEEK_SET) = 0 <0.000024>
[pid  1431] 1122318636.263841 _llseek(3, 1761280, [1761280], SEEK_SET) = 0 <0.000015>
[pid  1431] 1122318636.263913 _llseek(3, 1761280, [1761280], SEEK_SET) = 0 <0.000015>
[pid  1431] 1122318636.263984 _llseek(3, 1761280, [1761280], SEEK_SET) = 0 <0.000014>
[pid  1431] 1122318636.264055 _llseek(3, 1761280, [1761280], SEEK_SET) = 0 <0.000015>
[pid  1431] 1122318636.264127 _llseek(3, 1761280, [1761280], SEEK_SET) = 0 <0.000015>
[pid  1431] 1122318636.264199 _llseek(3, 1761280, [1761280], SEEK_SET) = 0 <0.000015>
[pid  1431] 1122318636.264271 _llseek(3, 1761280, [1761280], SEEK_SET) = 0 <0.000015>
[pid  1431] 1122318636.264342 _llseek(3, 1761280, [1761280], SEEK_SET) = 0 <0.000016>
[pid  1431] 1122318636.264414 _llseek(3, 1761280, [1761280], SEEK_SET) = 0 <0.000016>
[pid  1431] 1122318636.264487 _llseek(3, 1761280, [1761280], SEEK_SET) = 0 <0.000015>
[pid  1431] 1122318636.264558 _llseek(3, 1761280, [1761280], SEEK_SET) = 0 <0.000016>
[pid  1431] 1122318636.264630 _llseek(3, 1761280, [1761280], SEEK_SET) = 0 <0.000015>
[pid  1431] 1122318636.264710 _llseek(3, 1761280, [1761280], SEEK_SET) = 0 <0.000015>
[pid  1431] 1122318636.264788 _llseek(3, 1761280, [1761280], SEEK_SET) = 0 <0.000016>
[pid  1431] 1122318636.264861 _llseek(3, 1761280, [1761280], SEEK_SET) = 0 <0.000015>
[pid  1431] 1122318636.264934 _llseek(3, 1761280, [1761280], SEEK_SET) = 0 <0.000016>
[pid  1431] 1122318636.265006 _llseek(3, 1761280, [1761280], SEEK_SET) = 0 <0.000015>
[pid  1431] 1122318636.265077 _llseek(3, 1761280, [1761280], SEEK_SET) = 0 <0.000015>
[pid  1431] 1122318636.265149 _llseek(3, 1761280, [1761280], SEEK_SET) = 0 <0.000014>
[pid  1431] 1122318636.265220 _llseek(3, 1761280, [1761280], SEEK_SET) = 0 <0.000015>
[pid  1431] 1122318636.265292 _llseek(3, 1761280, [1761280], SEEK_SET) = 0 <0.000016>
[pid  1431] 1122318636.265363 _llseek(3, 1761280, [1761280], SEEK_SET) = 0 <0.000016>
[pid  1431] 1122318636.265436 _llseek(3, 1761280, [1761280], SEEK_SET) = 0 <0.000015>
[pid  1431] 1122318636.265509 _llseek(3, 1761280, [1761280], SEEK_SET) = 0 <0.000015>
[pid  1431] 1122318636.265580 _llseek(3, 1761280, [1761280], SEEK_SET) = 0 <0.000015>
[pid  1431] 1122318636.265652 _llseek(3, 1761280, [1761280], SEEK_SET) = 0 <0.000016>
[pid  1431] 1122318636.265726 _llseek(3, 1761280, [1761280], SEEK_SET) = 0 <0.000017>
[pid  1431] 1122318636.265818 _llseek(3, 1761280, [1761280], SEEK_SET) = 0 <0.000015>
[pid  1431] 1122318636.265891 _llseek(3, 1761280, [1761280], SEEK_SET) = 0 <0.000015>
[pid  1431] 1122318636.265963 _llseek(3, 1761280, [1761280], SEEK_SET) = 0 <0.000015>
[pid  1431] 1122318636.266034 _llseek(3, 1761280, [1761280], SEEK_SET) = 0 <0.000015>
[pid  1431] 1122318636.266106 _llseek(3, 1761280, [1761280], SEEK_SET) = 0 <0.000015>
[pid  1431] 1122318636.266177 _llseek(3, 1761280, [1761280], SEEK_SET) = 0 <0.000016>
[pid  1431] 1122318636.266250 _llseek(3, 1761280, [1761280], SEEK_SET) = 0 <0.000016>
[pid  1431] 1122318636.266322 _llseek(3, 1761280, [1761280], SEEK_SET) = 0 <0.000015>
[pid  1431] 1122318636.266394 _llseek(3, 1761280, [1761280], SEEK_SET) = 0 <0.000015>
[pid  1431] 1122318636.266466 _llseek(3, 1761280, [1761280], SEEK_SET) = 0 <0.000016>
Signature · 3 lines
   -bill davidsen ([email protected])
"The secret to procrastination is to put things off until the
 last possible moment - but no longer"  -me
#14 lore raw
Quoted 21 lines · Bill Davidsen

One other oddment about this motherboard, Forgive if I have over-snipped this trying to make it relevant...

Quoted 16 lines · Andreas Baer
Quoted 10 lines · Willy Tarreau

On Mon, Jul 25, 2005 at 03:10:08PM +0200, Andreas Baer wrote:

There clearly is a problem on the system installed on this machine. You should use strace to see what this machine does all the time, it is absolutely not expected that the user/system ratios change so much between two nearly identical systems. So there are system calls which eat all CPU. You may want to try strace -Tttt on the running process during a few tens of seconds. I guess you'll immediately find the culprit amongst the syscalls, and it might give you a clue.

Quoted 8 lines
Quoted 6 lines

I hope you are talking about a hardware/kernel problem and not a software problem, because I tried it also with LiveCD's and they showed the same results on this machine.
I'm not a linux expert, that means I've never done anything like that before, so it would be nice if you give me a hint what you see in this results. :)

Am I misreading this, or is your program doing a bunch of seeks not followed by an i/o operation? I would doubt that's important, but your vmstat showed a lot of system time, and I just wonder if llseek() is more expensive in Linux than Windows. Or if your code is such that these calls are not optimized away by gcc.

I don't know what exactly produces this _llseek calls, but I ran the compiled binaries on both machines (desktop + notebook) without any recompilation and so I think they should do the same (even if this is bad or not optimized), but I see a time difference of more than 2:30 :) This _llseek calls also don't seem to be faster or slower if you compare the times on the notebook and the desktop.

Quoted 60 lines
Quoted 58 lines

strace output for desktop:
<--snip-->

[pid  1431] 1122318636.262578 _llseek(3, 1761280, [1761280], SEEK_SET) = 0 <0.000017>
[pid  1431] 1122318636.262654 _llseek(3, 1761280, [1761280], SEEK_SET) = 0 <0.000017>
[pid  1431] 1122318636.262732 _llseek(3, 1761280, [1761280], SEEK_SET) = 0 <0.000017>
[pid  1431] 1122318636.262809 _llseek(3, 1761280, [1761280], SEEK_SET) = 0 <0.000015>
[pid  1431] 1122318636.262881 _llseek(3, 1761280, [1761280], SEEK_SET) = 0 <0.000015>
[pid  1431] 1122318636.262952 _llseek(3, 1761280, [1761280], SEEK_SET) = 0 <0.000015>
[pid  1431] 1122318636.263023 _llseek(3, 1761280, [1761280], SEEK_SET) = 0 <0.000015>
[pid  1431] 1122318636.263094 _llseek(3, 1761280, [1761280], SEEK_SET) = 0 <0.000016>
[pid  1431] 1122318636.263165 _llseek(3, 1761280, [1761280], SEEK_SET) = 0 <0.000015>
[pid  1431] 1122318636.263237 _llseek(3, 1761280, [1761280], SEEK_SET) = 0 <0.000016>
[pid  1431] 1122318636.263310 _llseek(3, 1761280, [1761280], SEEK_SET) = 0 <0.000015>
[pid  1431] 1122318636.263381 _llseek(3, 1761280, [1761280], SEEK_SET) = 0 <0.000015>
[pid  1431] 1122318636.263452 _llseek(3, 1761280, [1761280], SEEK_SET) = 0 <0.000015>
[pid  1431] 1122318636.263523 _llseek(3, 1761280, [1761280], SEEK_SET) = 0 <0.000016>
[pid  1431] 1122318636.263594 _llseek(3, 1761280, [1761280], SEEK_SET) = 0 <0.000015>
[pid  1431] 1122318636.263666 _llseek(3, 1761280, [1761280], SEEK_SET) = 0 <0.000017>
[pid  1431] 1122318636.263740 _llseek(3, 1761280, [1761280], SEEK_SET) = 0 <0.000024>
[pid  1431] 1122318636.263841 _llseek(3, 1761280, [1761280], SEEK_SET) = 0 <0.000015>
[pid  1431] 1122318636.263913 _llseek(3, 1761280, [1761280], SEEK_SET) = 0 <0.000015>
[pid  1431] 1122318636.263984 _llseek(3, 1761280, [1761280], SEEK_SET) = 0 <0.000014>
[pid  1431] 1122318636.264055 _llseek(3, 1761280, [1761280], SEEK_SET) = 0 <0.000015>
[pid  1431] 1122318636.264127 _llseek(3, 1761280, [1761280], SEEK_SET) = 0 <0.000015>
[pid  1431] 1122318636.264199 _llseek(3, 1761280, [1761280], SEEK_SET) = 0 <0.000015>
[pid  1431] 1122318636.264271 _llseek(3, 1761280, [1761280], SEEK_SET) = 0 <0.000015>
[pid  1431] 1122318636.264342 _llseek(3, 1761280, [1761280], SEEK_SET) = 0 <0.000016>
[pid  1431] 1122318636.264414 _llseek(3, 1761280, [1761280], SEEK_SET) = 0 <0.000016>
[pid  1431] 1122318636.264487 _llseek(3, 1761280, [1761280], SEEK_SET) = 0 <0.000015>
[pid  1431] 1122318636.264558 _llseek(3, 1761280, [1761280], SEEK_SET) = 0 <0.000016>
[pid  1431] 1122318636.264630 _llseek(3, 1761280, [1761280], SEEK_SET) = 0 <0.000015>
[pid  1431] 1122318636.264710 _llseek(3, 1761280, [1761280], SEEK_SET) = 0 <0.000015>
[pid  1431] 1122318636.264788 _llseek(3, 1761280, [1761280], SEEK_SET) = 0 <0.000016>
[pid  1431] 1122318636.264861 _llseek(3, 1761280, [1761280], SEEK_SET) = 0 <0.000015>
[pid  1431] 1122318636.264934 _llseek(3, 1761280, [1761280], SEEK_SET) = 0 <0.000016>
[pid  1431] 1122318636.265006 _llseek(3, 1761280, [1761280], SEEK_SET) = 0 <0.000015>
[pid  1431] 1122318636.265077 _llseek(3, 1761280, [1761280], SEEK_SET) = 0 <0.000015>
[pid  1431] 1122318636.265149 _llseek(3, 1761280, [1761280], SEEK_SET) = 0 <0.000014>
[pid  1431] 1122318636.265220 _llseek(3, 1761280, [1761280], SEEK_SET) = 0 <0.000015>
[pid  1431] 1122318636.265292 _llseek(3, 1761280, [1761280], SEEK_SET) = 0 <0.000016>
[pid  1431] 1122318636.265363 _llseek(3, 1761280, [1761280], SEEK_SET) = 0 <0.000016>
[pid  1431] 1122318636.265436 _llseek(3, 1761280, [1761280], SEEK_SET) = 0 <0.000015>
[pid  1431] 1122318636.265509 _llseek(3, 1761280, [1761280], SEEK_SET) = 0 <0.000015>
[pid  1431] 1122318636.265580 _llseek(3, 1761280, [1761280], SEEK_SET) = 0 <0.000015>
[pid  1431] 1122318636.265652 _llseek(3, 1761280, [1761280], SEEK_SET) = 0 <0.000016>
[pid  1431] 1122318636.265726 _llseek(3, 1761280, [1761280], SEEK_SET) = 0 <0.000017>
[pid  1431] 1122318636.265818 _llseek(3, 1761280, [1761280], SEEK_SET) = 0 <0.000015>
[pid  1431] 1122318636.265891 _llseek(3, 1761280, [1761280], SEEK_SET) = 0 <0.000015>
[pid  1431] 1122318636.265963 _llseek(3, 1761280, [1761280], SEEK_SET) = 0 <0.000015>
[pid  1431] 1122318636.266034 _llseek(3, 1761280, [1761280], SEEK_SET) = 0 <0.000015>
[pid  1431] 1122318636.266106 _llseek(3, 1761280, [1761280], SEEK_SET) = 0 <0.000015>
[pid  1431] 1122318636.266177 _llseek(3, 1761280, [1761280], SEEK_SET) = 0 <0.000016>
[pid  1431] 1122318636.266250 _llseek(3, 1761280, [1761280], SEEK_SET) = 0 <0.000016>
[pid  1431] 1122318636.266322 _llseek(3, 1761280, [1761280], SEEK_SET) = 0 <0.000015>
[pid  1431] 1122318636.266394 _llseek(3, 1761280, [1761280], SEEK_SET) = 0 <0.000015>
[pid  1431] 1122318636.266466 _llseek(3, 1761280, [1761280], SEEK_SET) = 0 <0.000016>
#15 lore raw
Quoted 34 lines · Andreas Baer
Quoted 30 lines · Bill Davidsen

One other oddment about this motherboard, Forgive if I have over-snipped this trying to make it relevant...

Quoted 24 lines · Andreas Baer
Quoted 11 lines · Willy Tarreau

On Mon, Jul 25, 2005 at 03:10:08PM +0200, Andreas Baer wrote:

There clearly is a problem on the system installed on this machine. You should use strace to see what this machine does all the time, it is absolutely not expected that the user/system ratios change so much between two nearly identical systems. So there are system calls which eat all CPU. You may want to try strace -Tttt on the running process during a few tens of seconds. I guess you'll immediately find the culprit amongst the syscalls, and it might give you a clue.

I hope you are talking about a hardware/kernel problem and not a software problem, because I tried it also with LiveCD's and they showed the same results on this machine.
I'm not a linux expert, that means I've never done anything like that before, so it would be nice if you give me a hint what you see in this results. :)

Quoted 4 lines
Quoted 1 line

Am I misreading this, or is your program doing a bunch of seeks not followed by an i/o operation? I would doubt that's important, but your vmstat showed a lot of system time, and I just wonder if llseek() is more expensive in Linux than Windows. Or if your code is such that these calls are not optimized away by gcc.

I don't know what exactly produces this _llseek calls, but I ran the compiled binaries on both machines (desktop + notebook) without any recompilation and so I think they should do the same (even if this is bad or not optimized), but I see a time difference of more than 2:30 :) This _llseek calls also don't seem to be faster or slower if you compare the times on the notebook and the desktop.

If the program and test data is not proprietary, would it help to have me run the test on my P4P800, P4-2.8, HT on, and see if that's an issue with your particular board or BIOS? I have the 1086 BIOS from my notes on that machine, I think you were running a later BIOS? 1091 or so, from memory?

Anyway, I would run a test that takes 3 minutes if it helps as a data point.

Signature · 3 lines
bill davidsen <[email protected]>
 CTO TMR Associates, Inc
 Doing interesting things with small computers since 1979
#16 lore raw
Quoted 42 lines · Bill Davidsen
Quoted 40 lines · Andreas Baer
Quoted 33 lines · Bill Davidsen

One other oddment about this motherboard, Forgive if I have over-snipped this trying to make it relevant...

Quoted 20 lines · Andreas Baer
Quoted 5 lines · Willy Tarreau

On Mon, Jul 25, 2005 at 03:10:08PM +0200, Andreas Baer wrote:

Quoted 7 lines

There clearly is a problem on the system installed on this machine. You should use strace to see what this machine does all the time, it is absolutely not expected that the user/system ratios change so much between two nearly identical systems. So there are system calls which eat all CPU. You may want to try strace -Tttt on the running process during a few tens of seconds. I guess you'll immediately find the culprit amongst the syscalls, and it might give you a clue.

Quoted 6 lines

I hope you are talking about a hardware/kernel problem and not a software problem, because I tried it also with LiveCD's and they showed the same results on this machine.
I'm not a linux expert, that means I've never done anything like that before, so it would be nice if you give me a hint what you see in this results. :)

Am I misreading this, or is your program doing a bunch of seeks not followed by an i/o operation? I would doubt that's important, but your vmstat showed a lot of system time, and I just wonder if llseek() is more expensive in Linux than Windows. Or if your code is such that these calls are not optimized away by gcc.

Quoted 7 lines
Quoted 1 line

I don't know what exactly produces this _llseek calls, but I ran the compiled binaries on both machines (desktop + notebook) without any recompilation and so I think they should do the same (even if this is bad or not optimized), but I see a time difference of more than 2:30 :) This _llseek calls also don't seem to be faster or slower if you compare the times on the notebook and the desktop.

If the program and test data is not proprietary, would it help to have me run the test on my P4P800, P4-2.8, HT on, and see if that's an issue with your particular board or BIOS? I have the 1086 BIOS from my notes on that machine, I think you were running a later BIOS? 1091 or so, from memory?

Anyway, I would run a test that takes 3 minutes if it helps as a data point.

Properly a good idea, but you have a completely different chipset related to the Asus Website. I think it's a i865 and I have i875. I'm also running BIOS 1019(!).

That's the driver page for my Board:
http://support.asus.com/download/download.aspx?Type=All&model=P4C800%20Deluxe

It would be better if someone has at least the same board.

Does anyone have a Asus P4C800-Deluxe with a P4 around 2.4 GHz running on this mailing list and would sacrifice himself/herself to run a little test with my software for a maximum of 4 minutes? Would be approx. 10 MB for data transmission.