Skip to contentSkip to conversation

first version of working frontlight

FYI, ugly Pavel Machek 1 participant 1 message Jul 30, 2005 Arm (32-bit)

lore
Share & tools
lore
#0 lore raw

Hi!

I got frontlight to work, wow. Patch is extremely ugly, and I have a small problem? How do I do this properly? I need locomo_writel() to manipulate frontlight settings, but that only seems available in locomo.c. Putting frontlight support there is certainly possible, but looks ugly to me...
Pavel

author <pavel@amd.(none)> Sat, 30 Jul 2005 17:37:58 +0200 committer <pavel@amd.(none)> Sat, 30 Jul 2005 17:37:58 +0200

 arch/arm/common/locomo.c |   53 ++++++++++++++++++++++++++++++++++++++++++++--
 1 files changed, 51 insertions(+), 2 deletions(-)
arch/arm/common/locomo.c +25 -0
@@ -638,6 +638,52 @@ static int locomo_resume(struct device *
 }
 #endif
 
+
+static spinlock_t fl_lock = SPIN_LOCK_UNLOCKED;
+
+#define LCM_ALC_EN	0x8000
+
+void frontlight_set(struct locomo *lchip, int duty, int vr, int bpwf)
+{
+	unsigned long flags;
+#if 0
+	if (vr) poodlefl_enable_accel();
+	else 	poodlefl_disable_accel();
+#endif
+
+	spin_lock_irqsave(&fl_lock, flags);
+	locomo_writel(bpwf, lchip->base + LOCOMO_FRONTLIGHT + LOCOMO_ALS);
+	udelay(100);
+	locomo_writel(duty, lchip->base + LOCOMO_FRONTLIGHT + LOCOMO_ALD);
+	locomo_writel(bpwf | LCM_ALC_EN, lchip->base + LOCOMO_FRONTLIGHT + LOCOMO_ALS);
+	spin_unlock_irqrestore(&fl_lock, flags);
+}
+
+
 /**
  *	locomo_probe - probe for a single LoCoMo chip.
  *	@phys_addr: physical address of device.
@@ -697,6 +743,9 @@ __locomo_probe(struct device *me, struct
 	/* FrontLight */
 	locomo_writel(0, lchip->base + LOCOMO_FRONTLIGHT + LOCOMO_ALS);
 	locomo_writel(0, lchip->base + LOCOMO_FRONTLIGHT + LOCOMO_ALD);
+
+	frontlight_set(lchip, 163, 0, 148); /* Same constants can be used for collie and poodle (depending on CONFIG options in original sharp code?! */
+
 	/* Longtime timer */
 	locomo_writel(0, lchip->base + LOCOMO_LTINT);
 	/* SPI */
Signature · 1 line
if you have sharp zaurus hardware you don't need... you know my address