Fix nfsd rewrite performance
Subsystems (2)
PATCH 1/1 Fix nfsd rewrite performance
Since no-one commented on the previous versions of the patch, I'm submitting it almost unchanged now. This patch is relative to 2.6.12-rc3, and has undergone some iozone testing, which showed write and rewrite performance coming out almost the same.
------------------------------------------------------------------
Subject: NFS: Fix rewrite performance
This patch fixes an nfsd performance issue with rewrite. Most of the time, the iovecs passed to nfsd_vfs_write are unaligned. As the default writev implementation will just call write() on each chunk in the iovec, this will cause partial blocks to be dirtied, triggering a read-modify-write cycle for each block.
The short-term fix is to make sure nfsd aligns the data properly. The long term fix would be to make the VFS smarter about writev requests.
fs/nfsd/vfs.c +51 -0
@@ -874,6 +874,46 @@ out:return err; } +/* +* Helper function to page-align the write payload. +*/ +static inline int +nfsd_page_align_payload (struct kvec *vec,int vlen) +{ +unsigned char *this_page, *prev_page; +int i, chunk0, chunk1; + +/* The following checks are just paranoia */ +if (vlen <2 ) +return 0 ; + +if (vec[0 ].iov_len + vec[vlen-1 ].iov_len !=PAGE_CACHE_SIZE ) +return 0 ; +for (i =1 ; i < vlen -1 ; ++i) { +if (vec[i].iov_len !=PAGE_CACHE_SIZE ) +return 0 ; + } + + chunk0 = vec[0 ].iov_len; + chunk1 =PAGE_CACHE_SIZE - chunk0; + + this_page = (unsigned char *) vec[vlen-1 ].iov_base; +for (i = vlen-1 ; i; --i) { + prev_page = (unsigned char *) vec[i-1 ].iov_base; + +/* Push trailing partial page so it's +* aligned with the end of the page, then +* pull up the missing chunk from the previous +* page */ +memmove (this_page + chunk0, this_page, chunk1); +memcpy (this_page, prev_page + chunk1, chunk0); + vec[i].iov_len =PAGE_CACHE_SIZE ; + this_page = prev_page; + } + +return 1 ; +} + static inline int nfsd_vfs_write(struct svc_rqst *rqstp, struct svc_fh *fhp, struct file *file, loff_t offset, struct kvec *vec, int vlen,
@@ -917,6 +957,17 @@ nfsd_vfs_write(struct svc_rqst *rqstp, sif (stable && !EX_WGATHER (exp)) file->f_flags |=O_SYNC ; +/* Hack: if we're rewriting the file, make sure +* we align the iovec properly to avoid costly +* read-modify-write operations on the block devices. +* This hack can go away once we have generic_file_writev. +*/ +if ((offset < inode->i_size) + && (cnt %PAGE_CACHE_SIZE ) ==0 + && vec->iov_len !=PAGE_CACHE_SIZE + &&nfsd_page_align_payload (vec, vlen)) + vec++, vlen--; +/* Write the data. */ oldfs =get_fs ();set_fs (KERNEL_DS ); err =vfs_writev (file, (struct iovec __user *)vec, vlen, &offset);
Signature · 12 lines
Olaf Kirch | --- o --- Nous sommes du soleil we love when we play [email protected] | / | \ sol.dhoop.naytheet.ah kin.ir.samse.qurax ------------------------------------------------------- SF.Net email is sponsored by: Discover Easy Linux Migration Strategies from IBM. Find simple to follow Roadmaps, straightforward articles, informative Webcasts and more! Get everything you need to get up to speed, fast. http://ads.osdn.com/?ad_id=7477&alloc_id=16492&op=click _______________________________________________ NFS maillist - [email protected] https://lists.sourceforge.net/lists/listinfo/nfs
I haven't had the chance to read carefully; just one quick question:
fs/nfsd/vfs.c out: · line 912
Quoted 13 lines · Olaf Kirch
fs/nfsd/vfs.c +13
-0+ this_page = (unsigned char *) vec[vlen-1 ].iov_base; +for (i = vlen-1 ; i; --i) { + prev_page = (unsigned char *) vec[i-1 ].iov_base; + +/* Push trailing partial page so it's +* aligned with the end of the page, then +* pull up the missing chunk from the previous +* page */ +memmove (this_page + chunk0, this_page, chunk1); +memcpy (this_page, prev_page + chunk1, chunk0); + vec[i].iov_len =PAGE_CACHE_SIZE ; + this_page = prev_page; + }
If there's stuff after the write data (as there could be in the NFSv4 case at least), does this overwrite it?
--b.
-------------------------------------------------------
SF.Net email is sponsored by: Discover Easy Linux Migration Strategies from IBM. Find simple to follow Roadmaps, straightforward articles, informative Webcasts and more! Get everything you need to get up to speed, fast. http://ads.osdn.com/?ad_id=7477&alloc_id=16492&op=click
_______________________________________________
NFS maillist - [email protected]
https://lists.sourceforge.net/lists/listinfo/nfs
Quoted 17 lines · J. Bruce Fields
fs/nfsd/vfs.c out: · line 912
Quoted 13 lines · Olaf Kirch
fs/nfsd/vfs.c +13
-0+ this_page = (unsigned char *) vec[vlen-1 ].iov_base; +for (i = vlen-1 ; i; --i) { + prev_page = (unsigned char *) vec[i-1 ].iov_base; + +/* Push trailing partial page so it's +* aligned with the end of the page, then +* pull up the missing chunk from the previous +* page */ +memmove (this_page + chunk0, this_page, chunk1); +memcpy (this_page, prev_page + chunk1, chunk0); + vec[i].iov_len =PAGE_CACHE_SIZE ; + this_page = prev_page; + }If there's stuff after the write data (as there could be in the NFSv4 case at least), does this overwrite it?
It does. I hadn't thought of these cursed NFSv4 compound requests.
Alternatively, we could pull in everything and align it with the beginning of the message. This would clobber the RPC header etc. I don't see us doing doing any in-place decodes of strings etc in the svcauth code, so that may be a safer choice. I would like to avoid allocating an extra page just for aligning things.
Olaf
Signature · 12 lines
Olaf Kirch | --- o --- Nous sommes du soleil we love when we play [email protected] | / | \ sol.dhoop.naytheet.ah kin.ir.samse.qurax ------------------------------------------------------- SF.Net email is sponsored by: Discover Easy Linux Migration Strategies from IBM. Find simple to follow Roadmaps, straightforward articles, informative Webcasts and more! Get everything you need to get up to speed, fast. http://ads.osdn.com/?ad_id=7477&alloc_id=16492&op=click _______________________________________________ NFS maillist - [email protected] https://lists.sourceforge.net/lists/listinfo/nfs
Quoted 5 lines · Olaf Kirch
Alternatively, we could pull in everything and align it with the beginning of the message. This would clobber the RPC header etc. I don't see us doing doing any in-place decodes of strings etc in the svcauth code, so that may be a safer choice. I would like to avoid allocating an extra page just for aligning things.
Yeah. We'd also need to check, though, that we aren't taking pointers to data before the write (when decoding a previous compound op). I think we might be....
--b.
-------------------------------------------------------
SF.Net email is sponsored by: Discover Easy Linux Migration Strategies from IBM. Find simple to follow Roadmaps, straightforward articles, informative Webcasts and more! Get everything you need to get up to speed, fast. http://ads.osdn.com/?ad_id=7477&alloc_id=16492&op=click
_______________________________________________
NFS maillist - [email protected]
https://lists.sourceforge.net/lists/listinfo/nfs
Quoted 9 lines · J. Bruce Fields
Quoted 5 lines
Alternatively, we could pull in everything and align it with the beginning of the message. This would clobber the RPC header etc. I don't see us doing doing any in-place decodes of strings etc in the svcauth code, so that may be a safer choice. I would like to avoid allocating an extra page just for aligning things.
Yeah. We'd also need to check, though, that we aren't taking pointers to data before the write (when decoding a previous compound op). I think we might be....
Can we assume that the previous op inside the compound op has been dealt with completely? Why would it be unsafe to clobber it?
Olaf
Signature · 12 lines
Olaf Kirch | --- o --- Nous sommes du soleil we love when we play [email protected] | / | \ sol.dhoop.naytheet.ah kin.ir.samse.qurax ------------------------------------------------------- SF.Net email is sponsored by: Discover Easy Linux Migration Strategies from IBM. Find simple to follow Roadmaps, straightforward articles, informative Webcasts and more! Get everything you need to get up to speed, fast. http://ads.osdn.com/?ad_id=7477&alloc_id=16492&op=click _______________________________________________ NFS maillist - [email protected] https://lists.sourceforge.net/lists/listinfo/nfs
Quoted 7 lines · Olaf Kirch
Quoted 6 lines · J. Bruce Fields
Quoted 5 lines
Alternatively, we could pull in everything and align it with the beginning of the message. This would clobber the RPC header etc. I don't see us doing doing any in-place decodes of strings etc in the svcauth code, so that may be a safer choice. I would like to avoid allocating an extra page just for aligning things.
Quoted 6 lines
Quoted 3 lines
Yeah. We'd also need to check, though, that we aren't taking pointers to data before the write (when decoding a previous compound op). I think we might be....
Can we assume that the previous op inside the compound op has been dealt with completely?
Yeah, you're right, that's not a problem.
There's a different problem, though, with the request deferral stuff. It waits for upcalls by aborting request processing, saving a copy of the raw request data, then processing it from scratch again when the upcall response comes.
This is already unfortunate for writes since nfsd will try to kmalloc() enough memory to store the whole request. (See the "FIXME" in svcsock.c:svc_defer().)
But moving the data around in the pages will cause weird corruption if we decide to wait on an upcall after a write, because it's no longer to reprocess the request from scratch. It can only happen with v4, and probably only in fairly weird cases, but we can't guarantee it won't happen.
So I think we need to fix that upcall deferral mechanism before doing this shifting of data.
--b.
-------------------------------------------------------
SF.Net email is sponsored by: Discover Easy Linux Migration Strategies from IBM. Find simple to follow Roadmaps, straightforward articles, informative Webcasts and more! Get everything you need to get up to speed, fast. http://ads.osdn.com/?ad_id=7477&alloc_id=16492&op=click
_______________________________________________
NFS maillist - [email protected]
https://lists.sourceforge.net/lists/listinfo/nfs
Quoted 4 lines · J. Bruce Fields
There's a different problem, though, with the request deferral stuff. It waits for upcalls by aborting request processing, saving a copy of the raw request data, then processing it from scratch again when the upcall response comes.
I just looked at the code, and there are two types of deferrals. One is for authentication stuff - this will actually use svc_defer and svc_revisit, which goes back to look at the entire request.
The other type is what hte nfs4idmap stuff does, which uses its own defer/revisit routines, which just make the nfsd thread wait.
So neither poses a problem to munging the iovec in nfsd_write: The authentication stuff will happen when we parse the RPC header, which is way before we decide to call nfsd_write. The idmap stuff may be called after processing a write call, but it will not go back to revisit the entire request, it will just stall briefly while idmapd is doing its job. Correct?
In general, I believe it does not make sense to call svc_defer once we've started to process a request, because the request may not be idempotent. It sounds like a reasonable assumption to me that deferring and revisiting an entire requests is only done before we hit the RPC program handler.
Olaf
Signature · 12 lines
Olaf Kirch | --- o --- Nous sommes du soleil we love when we play [email protected] | / | \ sol.dhoop.naytheet.ah kin.ir.samse.qurax ------------------------------------------------------- SF.Net email is sponsored by: Discover Easy Linux Migration Strategies from IBM. Find simple to follow Roadmaps, straightforward articles, informative Webcasts and more! Get everything you need to get up to speed, fast. http://ads.osdn.com/?ad_id=7477&alloc_id=16492&op=click _______________________________________________ NFS maillist - [email protected] https://lists.sourceforge.net/lists/listinfo/nfs
Quoted 8 lines · Olaf Kirch
I just looked at the code, and there are two types of deferrals. One is for authentication stuff - this will actually use
svc_deferandsvc_revisit, which goes back to look at the entire request.The other type is what hte nfs4idmap stuff does, which uses its own defer/revisit routines, which just make the nfsd thread wait.
So neither poses a problem to munging the iovec in
nfsd_write:
It can also happen whenever we do fh_verify(). (See the exp_find() call in fh_verify().)
Quoted 11 lines
The authentication stuff will happen when we parse the RPC header, which is way before we decide to call
nfsd_write. The idmap stuff may be called after processing a write call, but it will not go back to revisit the entire request, it will just stall briefly while idmapd is doing its job. Correct?In general, I believe it does not make sense to call
svc_deferonce we've started to process a request, because the request may not be idempotent. It sounds like a reasonable assumption to me that deferring and revisiting an entire requests is only done before we hit the RPC program handler.
Yeah. So the simplest solution might be to make the other upcalls use the same sort of deferral as the idmap upcalls, at least in the v4 case. In the v3 case fh_verify always happens early enough not to be a problem, I believe.
Though I still think it's unfortunate even for v3 that it will try to copy (and allocate space for) the entire write request in the case of an authentication- or export- related upcall.
--b.
-------------------------------------------------------
SF.Net email is sponsored by: Discover Easy Linux Migration Strategies from IBM. Find simple to follow Roadmaps, straightforward articles, informative Webcasts and more! Get everything you need to get up to speed, fast. http://ads.osdn.com/?ad_id=7477&alloc_id=16492&op=click
_______________________________________________
NFS maillist - [email protected]
https://lists.sourceforge.net/lists/listinfo/nfs
Quoted 8 lines · J. Bruce Fields
Yeah. So the simplest solution might be to make the other upcalls use the same sort of deferral as the idmap upcalls, at least in the v4 case. In the v3 case
fh_verifyalways happens early enough not to be a problem, I believe.Though I still think it's unfortunate even for v3 that it will try to copy (and allocate space for) the entire write request in the case of an authentication- or export- related upcall.
I just looked at svc_defer in 2.6.12 and it seems it cannot handle more than one page of data anyway, and ditches anything else.
Olaf
Signature · 12 lines
Olaf Kirch | --- o --- Nous sommes du soleil we love when we play [email protected] | / | \ sol.dhoop.naytheet.ah kin.ir.samse.qurax ------------------------------------------------------- SF.Net email is sponsored by: Discover Easy Linux Migration Strategies from IBM. Find simple to follow Roadmaps, straightforward articles, informative Webcasts and more! Get everything you need to get up to speed, fast. http://ads.osdn.com/?ad_id=7477&alloc_id=16492&op=click _______________________________________________ NFS maillist - [email protected] https://lists.sourceforge.net/lists/listinfo/nfs
Quoted 6 lines · Olaf Kirch
Quoted 5 lines · J. Bruce Fields
Yeah. So the simplest solution might be to make the other upcalls use the same sort of deferral as the idmap upcalls, at least in the v4 case. In the v3 case
fh_verifyalways happens early enough not to be a problem, I believe.
Quoted 6 lines
Quoted 3 lines
Though I still think it's unfortunate even for v3 that it will try to copy (and allocate space for) the entire write request in the case of an authentication- or export- related upcall.
I just looked at
svc_deferin 2.6.12 and it seems it cannot handle more than one page of data anyway, and ditches anything else.
Oops, you're right. Forcing the client to time out and retry there is kind of unfortunate too, though. A half hour of activity (to expire entries from the export cache) followed by a write could trigger this.
--b.
-------------------------------------------------------
SF.Net email is sponsored by: Discover Easy Linux Migration Strategies from IBM. Find simple to follow Roadmaps, straightforward articles, informative Webcasts and more! Get everything you need to get up to speed, fast. http://ads.osdn.com/?ad_id=7477&alloc_id=16492&op=click
_______________________________________________
NFS maillist - [email protected]
https://lists.sourceforge.net/lists/listinfo/nfs