Skip to contentSkip to conversation

cpufreq on Toshiba Portege 4000?

DISCUSSION Andrey Borzenkov 2 participants 3 messages Aug 1, 2005 – Jan 8, 2006

lore
Share & tools
lore
#0 lore raw

Toshiba documentation claims it supports speedstep technology. It has Ali chipset and PIII CPU:

{pts/1}% lspci
00:00.0 Host bridge: ALi Corporation M1644/M1644T Northbridge+Trident (rev 01) 00:01.0 PCI bridge: ALi Corporation PCI to AGP Controller
00:02.0 USB Controller: ALi Corporation USB 1.1 Controller (rev 03) 00:04.0 IDE interface: ALi Corporation M5229 IDE (rev c3)
00:06.0 Multimedia audio controller: ALi Corporation M5451 PCI AC-Link Controller Audio Device (rev 01)
00:07.0 ISA bridge: ALi Corporation M1533 PCI to ISA Bridge [Aladdin IV] 00:08.0 Bridge: ALi Corporation M7101 Power Management Controller [PMU]
...
{pts/1}% cat /proc/cpuinfo
processor : 0
vendor_id : GenuineIntel
cpu family : 6
model : 8
model name : Pentium III (Coppermine)
stepping : 10
cpu MHz : 747.738
cache size : 256 KB
...

Any cnahce to use cpufreq (or compatible) technique here?

TIA

-andrey

#1 lore raw
Quoted 11 lines · Andrey Borzenkov

Toshiba documentation claims it supports speedstep technology. It has Ali chipset and PIII CPU:

{pts/1}% lspci
00:00.0 Host bridge: ALi Corporation M1644/M1644T Northbridge+Trident (rev 01) 00:01.0 PCI bridge: ALi Corporation PCI to AGP Controller
00:02.0 USB Controller: ALi Corporation USB 1.1 Controller (rev 03) 00:04.0 IDE interface: ALi Corporation M5229 IDE (rev c3)
...

Any cnahce to use cpufreq (or compatible) technique here?

Nope, The speedstep-smi driver only works on Intel chipsets.

Dave

#2 lore raw

-----BEGIN PGP SIGNED MESSAGE-----
Hash: SHA1

Quoted 11 lines · Dave Jones
Quoted 10 lines · Andrey Borzenkov

Toshiba documentation claims it supports speedstep technology. It has Ali chipset and PIII CPU:

{pts/1}% lspci
00:00.0 Host bridge: ALi Corporation M1644/M1644T Northbridge+Trident (rev 01) 00:01.0 PCI bridge: ALi Corporation PCI to AGP Controller 00:02.0 USB Controller: ALi Corporation USB 1.1 Controller (rev 03) 00:04.0 IDE interface: ALi Corporation M5229 IDE (rev c3)
...

Quoted 4 lines
Quoted 1 line

Any cnahce to use cpufreq (or compatible) technique here?

Nope, The speedstep-smi driver only works on Intel chipsets.

well, acpi-cpufreq appears to work here. The only drawback is that BIOS supports only 2 states (750 and 500MHz) while Toshiba HCI interface can switch between 8 levels; unfortunately I have no idea what frequencies they have.

Is there any utility to measure actual CPU frequency? If I can determine real speed, I could try extend DSDT to support other levels too.

TIA

- -andrey
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.2 (GNU/Linux)

iD8DBQFDwUz8R6LMutpd94wRApWiAKDHggfFN34VTPrC3ABsQO6SY9FztQCeJQCJ aWYCZX6k117FqtdVsY16UVQ=
=84r3
-----END PGP SIGNATURE-----