Skip to contentSkip to conversation

Problem in testing ALSA

DISCUSSION Chow Raymond 2 participants 5 messages Aug 3, 2005 1 message not in the archive

lore
Share & tools
lore

A message that is not in the archive (sent off-list or not yet received): 1122955779.3847.0.camel@mindpipe

#1 lore raw

Basically I want to test whether ALSA is working on my board or not. I got the ALSA driver built in to the kernel and then installed ALSA libraries and utils. When I perform aplay, I get this error.

[root@ARMCore /]$ aplay /home/test/decoded_4350.wav ALSA lib pcm.c:1962:(snd_pcm_open_noupdate) Unknown PCM default
aplay: main:507: audio open error: No such file or directory

I suspect that I need the snd_pcm module loaded before aplay could work. Thus, I need to modprobe soundcore module before I can modprobe snd_pcm module.

Hope you get a clearer picture. Willing to clarify more if you need more information. Hope to hear from you soon.

Thanks.

Regards

Quoted 12 lines · --- Lee Revell
Quoted 6 lines · Chow Raymond

Hi,

I encounter this problem.

[root@ARMCore user]$ modprobe soundcore
modprobe: /lib/libc.so.6: version `GLIBC_2.2.3'

not

Quoted 3 lines

found (required by mod)

Do I need GLIBC? If yes, where do I get it and

Quoted 12 lines

where

Quoted 1 line

shall I install it?

You can't link a kernel module against glibc.

What are you trying to do?

Lee

-------------------------------------------------------

Quoted 8 lines

SF.Net email is sponsored by: Discover Easy Linux
Migration Strategies
from IBM. Find simple to follow Roadmaps,
straightforward articles,
informative Webcasts and more! Get everything you
need to get up to
speed, fast.

http://ads.osdn.com/?ad_id=7477&alloc_id=16492&op=click

Quoted 4 lines

_______________________________________________
Alsa-devel mailing list
[email protected]

https://lists.sourceforge.net/lists/listinfo/alsa-devel

Quoted 1 line

__________________________________________________
Do You Yahoo!?
Tired of spam? Yahoo! Mail has the best spam protection around
http://mail.yahoo.com

-------------------------------------------------------
SF.Net email is sponsored by: Discover Easy Linux Migration Strategies from IBM. Find simple to follow Roadmaps, straightforward articles, informative Webcasts and more! Get everything you need to get up to speed, fast. http://ads.osdn.com/?ad_id=7477&alloc_id=16492&op=click

#2 lore raw
Quoted 6 lines · Chow Raymond

[root@ARMCore /]$ aplay /home/test/decoded_4350.wav ALSA lib pcm.c:1962:(snd_pcm_open_noupdate) Unknown PCM default
aplay: main:507: audio open error: No such file or directory

No, that probably just means that the default pcm is not defined. This is actually a userspace (alsa-lib) problem, it sounds like the kernel side might be OK.

But, please repost your query, and cc: alsa-devel, because I don't know that much about the ARM drivers.

Lee

-------------------------------------------------------
SF.Net email is sponsored by: Discover Easy Linux Migration Strategies from IBM. Find simple to follow Roadmaps, straightforward articles, informative Webcasts and more! Get everything you need to get up to speed, fast. http://ads.osdn.com/?ad_id=7477&alloc_id=16492&op=click

#3 lore raw
Quoted 5 lines · --- Lee Revell

No, that probably just means that the default pcm is not defined. This
is actually a userspace (alsa-lib) problem, it sounds like the kernel
side might be OK.

I don't get it. Default pcm is not defined? How do i define it then? Does it mean that aplay cannot find the appropriate libraries? Besides, I do not know how to configure my /etc/modules.conf too since Im using Compulab ArmCore board. There is no built in soundcard. It only has built in AC97 codec.

Regards

__________________________________________________
Do You Yahoo!?
Tired of spam? Yahoo! Mail has the best spam protection around
http://mail.yahoo.com

-------------------------------------------------------
SF.Net email is sponsored by: Discover Easy Linux Migration Strategies from IBM. Find simple to follow Roadmaps, straightforward articles, informative Webcasts and more! Get everything you need to get up to speed, fast. http://ads.osdn.com/?ad_id=7477&alloc_id=16492&op=click

#4 lore raw
Quoted 9 lines · Chow Raymond
Quoted 5 lines · --- Lee Revell

No, that probably just means that the default pcm is not defined. This
is actually a userspace (alsa-lib) problem, it sounds like the kernel
side might be OK.

Quoted 6 lines

I don't get it. Default pcm is not defined? How do i define it then? Does it mean that aplay cannot find the appropriate libraries? Besides, I do not know how to configure my /etc/modules.conf too since Im using Compulab ArmCore board. There is no built in soundcard. It only has built in AC97 codec.

See /usr/share/alsa/alsa.conf. Some devices can define their own default PCM in /usr/share/alsa/cards/*. But I have no idea how the AC97 codec on ARM fits into this scheme.

Try aplay -D hw:0,0 file.wav. And make sure alsa-lib is installed properly.

Lee

-------------------------------------------------------
SF.Net email is sponsored by: Discover Easy Linux Migration Strategies from IBM. Find simple to follow Roadmaps, straightforward articles, informative Webcasts and more! Get everything you need to get up to speed, fast. http://ads.osdn.com/?ad_id=7477&alloc_id=16492&op=click

#5 lore raw
In reply to Chow Raymond

On Tue, 2005-08-02 at 18:21 -0700, Chow Raymond wrote:

Disregard my last message, I see that you did cc: alsa-devel already.

Lee

-------------------------------------------------------
SF.Net email is sponsored by: Discover Easy Linux Migration Strategies from IBM. Find simple to follow Roadmaps, straightforward articles, informative Webcasts and more! Get everything you need to get up to speed, fast. http://ads.osdn.com/?ad_id=7477&alloc_id=16492&op=click