-stable review
Subsystems (8)
cover -stable review
This is the start of the stable review cycle for the 2.6.12.4 release. There are 13 patches in this series, all will be posted as a response to this one. If anyone has any issues with these being applied, please let us know. If anyone is a maintainer of the proper subsystem, and wants to add a signed-off-by: line to the patch, please respond with it.
These patches are sent out with a number of different people on the Cc:
line. If you wish to be a reviewer, please email [email protected] to add your name to the list. If you want to be off the reviewer list, also email us.
Responses should be made by Friday, Aug 5 07:00:00, UTC 2005. Anything received after that time, might be too late.
thanks,
the -stable release team
PATCH 1/13 kbuild: build TAGS problem with O=
-stable review patch. If anyone has any objections, please let us know.
------------------
For inclusion into 2.6.12.stable, extracted from current Linus git:
[PATCH] kbuild: build TAGS problem with O=
make O=/dir TAGS
fails with:
MAKE TAGS
find: security/selinux/include: No such file or directory
find: include: No such file or directory
find: include/asm-i386: No such file or directory
find: include/asm-generic: No such file or directory
The problem is in this line:
ifeq ($(KBUILD_OUTPUT),)
KBUILD_OUTPUT is not defined (ever) after make reruns itself. This line is used in the TAGS, tags, and cscope makes.
--- Makefile | 2 +- 1 files changed, 1 insertion(+), 1 deletion(-)
Makefile +1 -1
@@ -1149,7 +1149,7 @@ #(which is the most common case IMHO) to avoid unneeded clutter in the big tags file. #Adding $(srctree) adds about 20M on i386 to the size of the output file! -ifeq ($(KBUILD_OUTPUT),) +ifeq ($(src),$(obj)) __srctree = else __srctree = $(srctree)/
Re: [01/13] kbuild: build TAGS problem with O=
Quoted 7 lines · Chris Wright
-stable review patch. If anyone has any objections, please let us know.
------------------
For inclusion into 2.6.12.stable, extracted from current Linus git:
[PATCH] kbuild: build TAGS problem with O=
Ack.
Sam
PATCH 2/13 qla2xxx: Correct handling of fc_remote_port_add() failure case.
In reply to Chris Wright-stable review patch. If anyone has any objections, please let us know.
------------------
Correct handling of fc_remote_port_add() failure case.
Immediately return if fc_remote_port_add() fails to allocate resources for the rport. Original code would result in NULL pointer dereference upon failure.
--- drivers/scsi/qla2xxx/qla_init.c | 4 +++- 1 files changed, 3 insertions(+), 1 deletion(-)
drivers/scsi/qla2xxx/qla_init.c +3 -1
@@ -1914,9 +1914,11 @@ rport_ids.roles |=FC_RPORT_ROLE_FCP_TARGET ; fcport->rport = rport =fc_remote_port_add (ha->host,0 , &rport_ids); -if (!rport) +if (!rport) {qla_printk (KERN_WARNING , ha,"Unable to allocate fc remote port!\n" ); +return ; + }if (rport->scsi_target_id !=-1 && rport->scsi_target_id <MAX_TARGETS ) fcport->os_target_id = rport->scsi_target_id;
PATCH 3/13 rocket.c: Fix ldisc ref count handling
In reply to Chris Wright-stable review patch. If anyone has any objections, please let us know.
------------------
From: Michal Ostrowski <[email protected]>
If bailing out because there is nothing to receive in rp_do_receive(), tty_ldisc_deref is not called. Failure to do so increases the ref count=20 and causes release_dev() to hang since it can't get the ref count to 0.
--- drivers/char/rocket.c | 3 ++- 1 files changed, 2 insertions(+), 1 deletion(-)
drivers/char/rocket.c +2 -1
@@ -277,7 +277,7 @@ ToRecv = space;if (ToRecv <=0 ) -return ; + goto done;/* * if status indicates there are errored characters in the
@@ -359,6 +359,7 @@ }/* Push the data up to the tty layer */ ld->receive_buf (tty, tty->flip.char_buf, tty->flip.flag_buf, count); +done:tty_ldisc_deref (ld); }
PATCH 4/13 x86_64 memleak from malicious 32bit elf program
In reply to Chris Wright-stable review patch. If anyone has any objections, please let us know.
------------------
malicious 32bit app can have an elf section at 0xffffe000. During exec of this app, we will have a memory leak as insert_vm_struct() is not checking for return value in syscall32_setup_pages() and thus not freeing the vma allocated for the vsyscall page.
Check the return value and free the vma incase of failure.
--- arch/x86_64/ia32/syscall32.c | 7 ++++++- 1 files changed, 6 insertions(+), 1 deletion(-)
arch/x86_64/ia32/syscall32.c +6 -1
@@ -57,6 +57,7 @@int npages = (VSYSCALL32_END -VSYSCALL32_BASE ) >>PAGE_SHIFT ;struct vm_area_struct *vma;struct mm_struct *mm = current->mm; +int ret; vma =kmem_cache_alloc (vm_area_cachep,SLAB_KERNEL );if (!vma)
@@ -78,7 +79,11 @@ vma->vm_mm = mm;down_write (&mm->mmap_sem); -insert_vm_struct (mm, vma); +if ((ret =insert_vm_struct (mm, vma))) { +up_write (&mm->mmap_sem); +kmem_cache_free (vm_area_cachep, vma); +return ret; + } mm->total_vm += npages;up_write (&mm->mmap_sem);return 0 ;
Re: [04/13] x86_64 memleak from malicious 32bit elf program
Ok for me. Thanks Suresh.
-Andi
Quoted 9 lines · Chris Wright
-stable review patch. If anyone has any objections, please let us know.
------------------
malicious 32bit app can have an elf section at
0xffffe000. During exec of this app, we will have a memory leak asinsert_vm_struct()is not checking for return value insyscall32_setup_pages()and thus not freeing the vma allocated for the vsyscall page.
PATCH 5/13 : Fix signedness issues in net/core/filter.c
In reply to Chris Wright-stable review patch. If anyone has any objections, please let us know.
------------------
This is the code to load packet data into a register:
k = fentry->k;
if (k < 0) {
...
} else {
u32 _tmp, *p;
p = skb_header_pointer(skb, k, 4, &_tmp);
if (p != NULL) {
A = ntohl(*p);
continue;
}
}skb_header_pointer checks if the requested data is within the linear area:
int hlen = skb_headlen(skb);
if (offset + len <= hlen)
return skb->data + offset;When offset is within [INT_MAX-len+1..INT_MAX] the addition will result in a negative number which is <= hlen.
I couldn't trigger a crash on my AMD64 with 2GB of memory, but a coworker tried on his x86 machine and it crashed immediately.
This patch fixes the check in skb_header_pointer to handle large positive offsets similar to skb_copy_bits. Invalid data can still be accessed using negative offsets (also similar to skb_copy_bits), anyone using negative offsets needs to verify them himself.
Thanks to Thomas Vögtle <[email protected]> for verifying the problem by crashing his machine and providing me with an Oops.
--- include/linux/skbuff.h | 2 +- 1 files changed, 1 insertion(+), 1 deletion(-)
include/linux/skbuff.h +1 -1
@@ -1192,7 +1192,7 @@ {int hlen =skb_headlen (skb); -if (offset + len <= hlen) +if (hlen - offset >= len)return skb->data + offset;if (skb_copy_bits (skb, offset, buffer, len) <0 )
PATCH 6/13 : Fix deadlock in ip6_queue
In reply to Chris Wright-stable review patch. If anyone has any objections, please let us know.
------------------
[NETFILTER]: Fix deadlock in ip6_queue
Already fixed in ip_queue, ip6_queue was missed.
--- net/ipv6/netfilter/ip6_queue.c | 2 ++ 1 files changed, 2 insertions(+)
net/ipv6/netfilter/ip6_queue.c +2 -0
@@ -76,7 +76,9 @@static void ipq_issue_verdict (struct ipq_queue_entry *entry,int verdict) { +local_bh_disable ();nf_reinject (entry->skb, entry->info, verdict); +local_bh_enable ();kfree (entry); }
PATCH 7/13 : Fix potential memory corruption in NAT code (aka memory NAT)
In reply to Chris Wright-stable review patch. If anyone has any objections, please let us know.
------------------
[NETFILTER]: Fix potential memory corruption in NAT code (aka memory NAT)
The portptr pointing to the port in the conntrack tuple is declared static, which could result in memory corruption when two packets of the same protocol are NATed at the same time and one conntrack goes away.
--- net/ipv4/netfilter/ip_nat_proto_tcp.c | 3 ++- net/ipv4/netfilter/ip_nat_proto_udp.c | 3 ++- 2 files changed, 4 insertions(+), 2 deletions(-)
net/ipv4/netfilter/ip_nat_proto_tcp.c +2 -1
@@ -40,7 +40,8 @@enum ip_nat_manip_type maniptype, const struct ip_conntrack *conntrack) { - static u_int16_t port, *portptr; + static u_int16_t port; +u_int16_t *portptr;unsigned int range_size, min, i;if (maniptype ==IP_NAT_MANIP_SRC )
net/ipv4/netfilter/ip_nat_proto_udp.c +2 -1
@@ -41,7 +41,8 @@enum ip_nat_manip_type maniptype, const struct ip_conntrack *conntrack) { - static u_int16_t port, *portptr; + static u_int16_t port; +u_int16_t *portptr;unsigned int range_size, min, i;if (maniptype ==IP_NAT_MANIP_SRC )
PATCH 8/13 : Wait until all references to ip_conntrack_untracked are dropped on unload
In reply to Chris Wright-stable review patch. If anyone has any objections, please let us know.
------------------
[NETFILTER]: Wait until all references to ip_conntrack_untracked are dropped on unload
Fixes a crash when unloading ip_conntrack.
--- net/ipv4/netfilter/ip_conntrack_core.c | 3 +++ 1 files changed, 3 insertions(+)
net/ipv4/netfilter/ip_conntrack_core.c +3 -0
@@ -1124,6 +1124,9 @@schedule (); goto i_see_dead_people; } +/* wait until all references to ip_conntrack_untracked are dropped */ +while (atomic_read (&ip_conntrack_untracked.ct_general.use) >1 ) +schedule ();kmem_cache_destroy (ip_conntrack_cachep);kmem_cache_destroy (ip_conntrack_expect_cachep);
PATCH 9/13 : Fix possible overflow of sock->sk_policy
In reply to Chris Wright-stable review patch. If anyone has any objections, please let us know.
------------------
From: Herbert Xu <[email protected]>
[XFRM]: Fix possible overflow of sock->sk_policy
Spotted by, and original patch by, Balazs Scheidler.
--- net/xfrm/xfrm_user.c | 3 +++ 1 files changed, 3 insertions(+)
net/xfrm/xfrm_user.c +3 -0
@@ -1180,6 +1180,9 @@if (nr >XFRM_MAX_DEPTH )return NULL ; +if (p->dir >XFRM_POLICY_OUT ) +return NULL ; + xp =xfrm_policy_alloc (GFP_KERNEL );if (xp ==NULL ) { *dir = -ENOBUFS ;
PATCH 10/13 bio_clone fix
In reply to Chris Wright-stable review patch. If anyone has any objections, please let us know.
------------------
[PATCH] bio_clone fix
Fix bug introduced in 2.6.11-rc2: when we clone a BIO we need to copy over the current index into it as well.
It corrupts data with some MD setups.
See http://bugzilla.kernel.org/show_bug.cgi?id=4946
Huuuuuuuuge thanks to Matthew Stapleton <[email protected]> for doggedly chasing this one down.
---
fs/bio.c | 1 + 1 files changed, 1 insertion(+)
fs/bio.c +1 -0
@@ -261,6 +261,7 @@ inline void __bio_clone(struct bio *bio,*/ bio->bi_vcnt = bio_src->bi_vcnt; bio->bi_size = bio_src->bi_size; + bio->bi_idx = bio_src->bi_idx;bio_phys_segments (q, bio);bio_hw_segments (q, bio); }
-
Re: [10/13] [PATCH] bio_clone fix
Quoted 1 line · Chris Wright
-stable review patch. If anyone has any objections, please let us know.
Full ack.
Quoted 39 lines
------------------
[PATCH]
bio_clonefixFix bug introduced in 2.6.11-rc2: when we clone a BIO we need to copy over the current index into it as well.
It corrupts data with some MD setups.
See http://bugzilla.kernel.org/show_bug.cgi?id=4946
Huuuuuuuuge thanks to Matthew Stapleton <[email protected]> for doggedly chasing this one down.
Acked-by Jens Axboe <[email protected]>Cc <[email protected]>Cc <[email protected]>Signed-off-by Andrew Morton <[email protected]>Signed-off-by Linus Torvalds <[email protected]>Signed-off-by Chris Wright <[email protected]>---
fs/bio.c | 1 + 1 files changed, 1 insertion(+)fs/bio.c +1
-1@@ -261,6 +261,7 @@ inline void __bio_clone(struct bio *bio,*/ bio->bi_vcnt = bio_src->bi_vcnt; bio->bi_size = bio_src->bi_size; + bio->bi_idx = bio_src->bi_idx;bio_phys_segments (q, bio);bio_hw_segments (q, bio); } -
Signature · 1 line
Jens Axboe
PATCH 11/13 sys_get_thread_area does not clear the returned argument
In reply to Chris Wright-stable review patch. If anyone has any objections, please let us know.
------------------
sys_get_thread_area does not memset to 0 its struct user_desc info before copying it to user space... since sizeof(struct user_desc) is 16 while the actual datas which are filled are only 12 bytes + 9 bits (across the bitfields), there is a (small) information leak.
This was already committed to Linus' repository.
---
vanilla-linux-2.6.12-paolo/arch/i386/kernel/process.c | 2 ++ 1 files changed, 2 insertions(+)
arch/i386/kernel/process.c renamed from arch/i386/kernel/process.c~sec-micro-info-leak +2 -0
@@ -827,6 +827,8 @@ asmlinkage int sys_get_thread_area(strucif (idx <GDT_ENTRY_TLS_MIN || idx >GDT_ENTRY_TLS_MAX )return -EINVAL ; +memset (&info,0 ,sizeof (info)); + desc = current->thread.tls_array + idx -GDT_ENTRY_TLS_MIN ; info.entry_number = idx;
PATCH 12/13 : Fix early vlan adding leads to not functional device
In reply to Chris Wright-stable review patch. If anyone has any objections, please let us know.
------------------
[VLAN]: Fix early vlan adding leads to not functional device
OK, I can see what's happening here. eth0 doesn't detect link-up until after a few seconds, so when the vlan interface is opened immediately after eth0 has been opened, it inherits the link-down state. Subsequently the vlan interface is never properly activated and are thus unable to transmit any packets.
dev->state bits are not supposed to be manipulated directly. Something similar is probably needed for the netif_device_present() bit, although I don't know how this is meant to work for a virtual device.
---
net/8021q/vlan.c +8 -0
@@ -578,6 +578,14 @@ static int vlan_device_event(struct notiif (!vlandev)continue ; +if (netif_carrier_ok (dev)) { +if (!netif_carrier_ok (vlandev)) +netif_carrier_on (vlandev); + }else { +if (netif_carrier_ok (vlandev)) +netif_carrier_off (vlandev); + } +if ((vlandev->state &VLAN_LINK_STATE_MASK ) != flgs) { vlandev->state = (vlandev->state &~VLAN_LINK_STATE_MASK ) | flgs;
PATCH 13/13 Fix powernow oops on dual-core athlon
In reply to Chris Wright-stable review patch. If anyone has any objections, please let us know.
------------------
powernow-k8 requires that a data structure for each core be created in the _cpu_init function call. The cpufreq infrastructure doesn't call _cpu_init for the second core in each processor. Some systems crashed when _get was called with an odd-numbered core because it tried to dereference a NULL pointer since the data structure had not been created.
The attached patch solves the problem by initializing data structures for all shared cores in the _cpu_init function. It should apply to 2.6.12-rc6 and has been tested by AMD and Sun.
---
arch/i386/kernel/cpu/cpufreq/powernow-k8.c +5 -3
@@ -44,7 +44,7 @@#define PFX "powernow-k8: "#define BFX PFX "BIOS error: " -#define VERSION "version 1.40.2" +#define VERSION "version 1.40.4"#include "powernow-k8.h" /* serialize freq changes */
@@ -978,7 +978,7 @@ static int __init powernowk8_cpu_init(st {struct powernow_k8_data *data;cpumask_t oldmask =CPU_MASK_ALL ; -int rc; +int rc, i;if (!check_supported_cpu (pol->cpu))return -ENODEV ;
@@ -1064,7 +1064,9 @@ static int __init powernowk8_cpu_init(stprintk ("cpu_init done, current fid 0x%x, vid 0x%x\n" , data->currfid, data->currvid); - powernow_data[pol->cpu] = data; +for_each_cpu_mask (i, cpu_core_map[pol->cpu]) { + powernow_data[i] = data; + }return 0 ;