2.4.21: Sharing interrupts with serial console
I have read http://www.tldp.org/HOWTO/Remote-Serial-Console-HOWTO/preparation-setport.html
and http://www.linux-mips.org/archives/linux-mips/2004-04/msg00134.html
and other items, but I still have not found the answers to the
following questions:
1. The rs_init function in ./linux-2.4.21/drivers/char/serial.c explicitly states "The interrupt of the serial console port can't be shared." Does this include *ALL* interrupts? The code checks for sharing only with other serial devices, not *ALL* types of devices like I2C, RTC, etc.
2. While the presence of the comment about not sharing was nice, it does not explain "why?" Why can't we share the serial console interrupt? The serial console seems to work when I alter serial.c to skip this check for the sharing of interrupts with the serial console.
3. Does the hardware platform matter? We are running Linux 2.4.21 on an embedded XScale(ARM)-based board.
Thanks,
Chris.
Quoted 5 lines · Chris Budd
1. The
rs_initfunction in./linux-2.4.21/drivers/char/serial.cexplicitly states "The interrupt of the serial console port can't be shared." Does this include *ALL* interrupts? The code checks for sharing only with other serial devices, not *ALL* types of devices like I2C, RTC, etc.
I think you'll find that older versions of the serial driver did not allow the IRQ to be shared by other devices. It probably got changed with the addition of PCI card support.
Quoted 2 lines
2. While the presence of the comment about not sharing was nice, it does not explain "why?"
Connecting a level-active interrupt output to an edge-triggered interrupt controller input is Bad News(tm) for missing interrupts.
The situation is as follows:
- serial port asserts interrupt output which triggers an interrupt to the CPU. You enter the serial handler.
- Before you clear the serial interrupt, the other device sharing this interrupt asserts its interrupt output - so there was no edge transition.
- You complete service the serial port, and move on to service the other device.
- Before you clear it's interrupt, the serial port re-asserts its interrupt output, and again there was no edge transition as far as the interrupt controller can tell.
- You complete servicing the other device and leave return from interrupt mode.
Quoted 1 line
From this point on, neither device can cause an interrupt to be sent
to the CPU again.
The above is rather long to put in a comment.
Quoted 3 lines
Why can't we share the serial console interrupt?
The serial console seems to work when I alterserial.cto skip this check for the sharing of interrupts with the serial console.
If the interrupt is shared, it's possible for the interrupt handler to service the serial port while it's being used to send a kernel message, and thereby disrupt the kernel message output.
Quoted 2 lines
3. Does the hardware platform matter? We are running Linux 2.4.21 on an embedded XScale(ARM)-based board.
Depends how you've connected the serial port interrupt. Edge triggered inputs bad, level triggered good.
If your Intel hardware doesn't have level triggered input capabilities, please apply customer pressure to Intel to ensure that they consider it for their future ARM-based designs.
Signature · 3 lines
Russell King Linux kernel 2.6 ARM Linux - http://www.arm.linux.org.uk/ maintainer of: 2.6 Serial core
Quoted 6 lines · Russell King
Quoted 5 lines · Chris Budd
1. The
rs_initfunction in./linux-2.4.21/drivers/char/serial.cexplicitly states "The interrupt of the serial console port can't be shared." Does this include *ALL* interrupts? The code checks for sharing only with other serial devices, not *ALL* types of devices like I2C, RTC, etc.
<snip>
Quoted 6 lines
Quoted 2 lines
2. While the presence of the comment about not sharing was nice, it does not explain "why?"
Connecting a level-active interrupt output to an edge-triggered interrupt controller input is Bad News(tm) for missing interrupts.
Of course. I thought it was something more serious in the bowels of the kernel. All the comment needed was just that one adjective "The *edge-triggered* interrupt of the serial console port can't be shared." I know many programmers do not like to write comments, but good comments make the code more robust and stable: the code clearly shows *what* you did, but comments are necessary to indicate *why*.
<snip>
Quoted 3 lines
If your Intel hardware doesn't have level triggered input capabilities, please apply customer pressure to Intel to ensure that they consider it for their future ARM-based designs.
You will be happy to know that the Intel IOP80321 has level-sensitive interrupts.
Thank you for the detailed explanation.
Chris.
Quoted 16 lines · Chris Budd
I have read http://www.tldp.org/HOWTO/Remote-Serial-Console-HOWTO/preparation-setport.html
and http://www.linux-mips.org/archives/linux-mips/2004-04/msg00134.html
and other items, but I still have not found the answers to the
following questions:1. The
rs_initfunction in./linux-2.4.21/drivers/char/serial.cexplicitly states "The interrupt of the serial console port can't be shared." Does this include *ALL* interrupts? The code checks for sharing only with other serial devices, not *ALL* types of devices like I2C, RTC, etc.2. While the presence of the comment about not sharing was nice, it does not explain "why?" Why can't we share the serial console interrupt? The serial console seems to work when I alter
serial.cto skip this check for the sharing of interrupts with the serial console.
Quoted 6 lines
3. Does the hardware platform matter? We are running Linux 2.4.21 on an embedded XScale(ARM)-based board.
Thanks,
Chris.
-
Only LEVEL interrupts can be shared, and all the drivers that share that one interrupt need to be designed for sharing.
Cheers,
Dick Johnson
Penguin : Linux version 2.6.12 on an i686 machine (5537.79 BogoMips). Warning : 98.36% of all statistics are fiction.
.
I apologize for the following. I tried to kill it with the above dot :
****************************************************************
The information transmitted in this message is confidential and may be privileged. Any review, retransmission, dissemination, or other use of this information by persons or entities other than the intended recipient is prohibited. If you are not the intended recipient, please notify Analogic Corporation immediately - by replying to this message or by sending an email to [email protected] - and destroy all copies of this information, including any attachments, without reading or disclosing them.
Thank you.