Skip to contentSkip to conversation

cannot connect to i-mate SP3 using belkin usb bluetooth adapter and Linux 2.6

Bluez-devel Luigi Genoni 2 participants 2 messages Aug 13, 2005 – Sep 1, 2005 Bluetooth drivers

lore
Share & tools
lore
#0 lore raw

Hi,
recently I change my =E8hone fro nokia 6310i to i-mate sp3 (OS version=20 1.5.33.11).
Since I changed it I cannot connect to the phone with my linux laptop to use the phoen a gprs modem.

everything worked fine with nokia 6310, but=20
when I try to access to rfcomm0 (I do rfcomm bind 0 xx:xx:xx:xx:xx 1) with kpp all I get not is a (modem is budy).
this is the hcidump -X output

BlackDeath:{root}:~>hcidump -X
HCI sniffer - Bluetooth packet analyzer ver 1.23
device: hci0 snap_len: 1028 filter: 0xffffffff < HCI Command: Create Connection (0x01|0x0005) plen 13
0000: 0b b6 06 2d 09 00 18 cc 02 00 00 00 01 ...-.........

Quoted 1 line

HCI Event: Command Status (0x0f) plen 4

0000: 00 01 05 04 ....

Quoted 1 line

HCI Event: Connect Complete (0x03) plen 11

0000: 00 06 00 0b b6 06 2d 09 00 01 00 ......-....
< ACL data: handle 6 flags 0x02 dlen 12

    L2CAP(s): Connect req: psm 3 scid 0x0040

< HCI Command: Write Link Policy Settings (0x02|0x000d) plen 4
0000: 06 00 0f 00 ....

Quoted 1 line

HCI Event: Command Complete (0x0e) plen 6

0000: 01 0d 08 00 06 00 ......

Quoted 1 line

HCI Event: Number of Completed Packets (0x13) plen 5

0000: 01 06 00 01 00 .....

Quoted 1 line

HCI Event: Max Slots Change (0x1b) plen 3

0000: 06 00 05 ...

Quoted 1 line

ACL data: handle 6 flags 0x02 dlen 16

    L2CAP(s): Connect rsp: dcid 0x014b scid 0x0040 result 0 status 0
      Connection successful
< ACL data: handle 6 flags 0x02 dlen 16
    L2CAP(s): Config req: dcid 0x014b flags 0x00 clen 4
      MTU 1024
Quoted 1 line

ACL data: handle 6 flags 0x02 dlen 12

    L2CAP(s): Config req: dcid 0x0040 flags 0x00 clen 0
< ACL data: handle 6 flags 0x02 dlen 14
    L2CAP(s): Config rsp: scid 0x014b flags 0x00 result 0 clen 0
      Success
Quoted 1 line

HCI Event: Number of Completed Packets (0x13) plen 5

0000: 01 06 00 02 00 .....

Quoted 1 line

ACL data: handle 6 flags 0x02 dlen 14

    L2CAP(s): Config rsp: scid 0x0040 flags 0x00 result 0 clen 0
      Success
< ACL data: handle 6 flags 0x02 dlen 8
    L2CAP(d): cid 0x014b len 4 [psm 3]
      RFCOMM(s): SABM: cr 1 dlci 0 pf 1 ilen 0 fcs 0x1c
Quoted 1 line

HCI Event: Number of Completed Packets (0x13) plen 5

0000: 01 06 00 01 00 .....

Quoted 1 line

ACL data: handle 6 flags 0x02 dlen 8

    L2CAP(d): cid 0x0040 len 4 [psm 3]
      RFCOMM(s): UA: cr 1 dlci 0 pf 1 ilen 0 fcs 0xd7

< ACL data: handle 6 flags 0x02 dlen 18
L2CAP(d): cid 0x014b len 14 [psm 3]
RFCOMM(s): PN CMD: cr 1 dlci 0 pf 0 ilen 10 fcs 0x70 mcc_len 8 dlci 2 frame_type 0 credit_flow 15 pri 7 ack_timer 0 frame_size 667 max_retrans 0 credits 7

Quoted 1 line

HCI Event: Number of Completed Packets (0x13) plen 5

0000: 01 06 00 01 00 .....

Quoted 2 lines

ACL data: handle 6 flags 0x02 dlen 17
ACL data: handle 6 flags 0x01 dlen 1

L2CAP(d): cid 0x0040 len 14 [psm 3]
RFCOMM(s): PN RSP: cr 0 dlci 0 pf 0 ilen 10 fcs 0xaa mcc_len 8 dlci 2 frame_type 0 credit_flow 14 pri 7 ack_timer 0 frame_size 667 max_retrans 0 credits 7
< ACL data: handle 6 flags 0x02 dlen 8

    L2CAP(d): cid 0x014b len 4 [psm 3]
      RFCOMM(s): SABM: cr 1 dlci 2 pf 1 ilen 0 fcs 0x59
Quoted 1 line

HCI Event: Number of Completed Packets (0x13) plen 5

0000: 01 06 00 01 00 .....

Quoted 1 line

HCI Event: PIN Code Request (0x16) plen 6

0000: 0b b6 06 2d 09 00 ...-..
< ACL data: handle 6 flags 0x02 dlen 8

    L2CAP(d): cid 0x014b len 4 [psm 3]
      RFCOMM(s): DISC: cr 1 dlci 2 pf 1 ilen 0 fcs 0xb8
Quoted 1 line

HCI Event: Number of Completed Packets (0x13) plen 5

0000: 01 06 00 01 00 .....

Quoted 1 line

ACL data: handle 6 flags 0x02 dlen 8

    L2CAP(d): cid 0x0040 len 4 [psm 3]
      RFCOMM(s): UA: cr 1 dlci 2 pf 1 ilen 0 fcs 0x92
< ACL data: handle 6 flags 0x02 dlen 8
    L2CAP(d): cid 0x014b len 4 [psm 3]
      RFCOMM(s): DISC: cr 1 dlci 0 pf 1 ilen 0 fcs 0xfd
< ACL data: handle 6 flags 0x02 dlen 12
    L2CAP(s): Disconn req: dcid 0x014b scid 0x0040
Quoted 1 line

HCI Event: Number of Completed Packets (0x13) plen 5

0000: 01 06 00 02 00 .....

Quoted 1 line

ACL data: handle 6 flags 0x02 dlen 8

    L2CAP(d): cid 0x0040 len 4 [psm 3]
      RFCOMM(s): UA: cr 1 dlci 0 pf 1 ilen 0 fcs 0xd7
Quoted 1 line

ACL data: handle 6 flags 0x02 dlen 12

    L2CAP(s): Disconn rsp: dcid 0x014b scid 0x0040

< HCI Command: Disconnect (0x01|0x0006) plen 3
0000: 06 00 13 ...

Quoted 1 line

HCI Event: Command Status (0x0f) plen 4

0000: 00 01 06 04 ....

Quoted 1 line

HCI Event: Disconn Complete (0x05) plen 4

0000: 00 06 00 16 ....

some idea?

bests

Luigi Genoni

-------------------------------------------------------
SF.Net email is Sponsored by the Better Software Conference & EXPO September 19-22, 2005 * San Francisco, CA * Development Lifecycle Practices Agile & Plan-Driven Development * Managing Projects & Teams * Testing & QA Security * Process Improvement & Measurement * http://www.sqe.com/bsce5sf
_______________________________________________
Bluez-devel mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/bluez-devel

#1 lore raw

-----BEGIN PGP SIGNED MESSAGE-----
Hash: SHA1

Hi. I'm using an i-mate sp3 to develop a sort of HF profile and I've seen the same problem.
i-mate sp3 change rfcomm channels at every reboot, so you must search the right rfcomm channel with the command:
sdptool search DUN.

Cheers,
Pizza

Quoted 143 lines · Luigi Genoni

Hi,
recently I change my èhone fro nokia 6310i to i-mate sp3 (OS version 1.5.33.11).
Since I changed it I cannot connect to the phone with my linux laptop to use the phoen a gprs modem.

everything worked fine with nokia 6310, but
when I try to access to rfcomm0 (I do rfcomm bind 0 xx:xx:xx:xx:xx 1) with kpp all I get not is a (modem is budy).
this is the hcidump -X output

BlackDeath:{root}:~>hcidump -X
HCI sniffer - Bluetooth packet analyzer ver 1.23
device: hci0 snap_len: 1028 filter: 0xffffffff < HCI Command: Create Connection (0x01|0x0005) plen 13
0000: 0b b6 06 2d 09 00 18 cc 02 00 00 00 01 ...-.........

Quoted 1 line

HCI Event: Command Status (0x0f) plen 4

0000: 00 01 05 04 ....

Quoted 1 line

HCI Event: Connect Complete (0x03) plen 11

0000: 00 06 00 0b b6 06 2d 09 00 01 00 ......-....
< ACL data: handle 6 flags 0x02 dlen 12

    L2CAP(s): Connect req: psm 3 scid 0x0040

< HCI Command: Write Link Policy Settings (0x02|0x000d) plen 4
0000: 06 00 0f 00 ....

Quoted 1 line

HCI Event: Command Complete (0x0e) plen 6

0000: 01 0d 08 00 06 00 ......

Quoted 1 line

HCI Event: Number of Completed Packets (0x13) plen 5

0000: 01 06 00 01 00 .....

Quoted 1 line

HCI Event: Max Slots Change (0x1b) plen 3

0000: 06 00 05 ...

Quoted 1 line

ACL data: handle 6 flags 0x02 dlen 16

    L2CAP(s): Connect rsp: dcid 0x014b scid 0x0040 result 0 status 0
      Connection successful
< ACL data: handle 6 flags 0x02 dlen 16
    L2CAP(s): Config req: dcid 0x014b flags 0x00 clen 4
      MTU 1024
Quoted 1 line

ACL data: handle 6 flags 0x02 dlen 12

    L2CAP(s): Config req: dcid 0x0040 flags 0x00 clen 0
< ACL data: handle 6 flags 0x02 dlen 14
    L2CAP(s): Config rsp: scid 0x014b flags 0x00 result 0 clen 0
      Success
Quoted 1 line

HCI Event: Number of Completed Packets (0x13) plen 5

0000: 01 06 00 02 00 .....

Quoted 1 line

ACL data: handle 6 flags 0x02 dlen 14

    L2CAP(s): Config rsp: scid 0x0040 flags 0x00 result 0 clen 0
      Success
< ACL data: handle 6 flags 0x02 dlen 8
    L2CAP(d): cid 0x014b len 4 [psm 3]
      RFCOMM(s): SABM: cr 1 dlci 0 pf 1 ilen 0 fcs 0x1c
Quoted 1 line

HCI Event: Number of Completed Packets (0x13) plen 5

0000: 01 06 00 01 00 .....

Quoted 1 line

ACL data: handle 6 flags 0x02 dlen 8

    L2CAP(d): cid 0x0040 len 4 [psm 3]
      RFCOMM(s): UA: cr 1 dlci 0 pf 1 ilen 0 fcs 0xd7

< ACL data: handle 6 flags 0x02 dlen 18
L2CAP(d): cid 0x014b len 14 [psm 3]
RFCOMM(s): PN CMD: cr 1 dlci 0 pf 0 ilen 10 fcs 0x70 mcc_len 8 dlci 2 frame_type 0 credit_flow 15 pri 7 ack_timer 0 frame_size 667 max_retrans 0 credits 7

Quoted 1 line

HCI Event: Number of Completed Packets (0x13) plen 5

0000: 01 06 00 01 00 .....

Quoted 2 lines

ACL data: handle 6 flags 0x02 dlen 17
ACL data: handle 6 flags 0x01 dlen 1

L2CAP(d): cid 0x0040 len 14 [psm 3]
RFCOMM(s): PN RSP: cr 0 dlci 0 pf 0 ilen 10 fcs 0xaa mcc_len 8 dlci 2 frame_type 0 credit_flow 14 pri 7 ack_timer 0 frame_size 667 max_retrans 0 credits 7
< ACL data: handle 6 flags 0x02 dlen 8

    L2CAP(d): cid 0x014b len 4 [psm 3]
      RFCOMM(s): SABM: cr 1 dlci 2 pf 1 ilen 0 fcs 0x59
Quoted 1 line

HCI Event: Number of Completed Packets (0x13) plen 5

0000: 01 06 00 01 00 .....

Quoted 1 line

HCI Event: PIN Code Request (0x16) plen 6

0000: 0b b6 06 2d 09 00 ...-..
< ACL data: handle 6 flags 0x02 dlen 8

    L2CAP(d): cid 0x014b len 4 [psm 3]
      RFCOMM(s): DISC: cr 1 dlci 2 pf 1 ilen 0 fcs 0xb8
Quoted 1 line

HCI Event: Number of Completed Packets (0x13) plen 5

0000: 01 06 00 01 00 .....

Quoted 1 line

ACL data: handle 6 flags 0x02 dlen 8

    L2CAP(d): cid 0x0040 len 4 [psm 3]
      RFCOMM(s): UA: cr 1 dlci 2 pf 1 ilen 0 fcs 0x92
< ACL data: handle 6 flags 0x02 dlen 8
    L2CAP(d): cid 0x014b len 4 [psm 3]
      RFCOMM(s): DISC: cr 1 dlci 0 pf 1 ilen 0 fcs 0xfd
< ACL data: handle 6 flags 0x02 dlen 12
    L2CAP(s): Disconn req: dcid 0x014b scid 0x0040
Quoted 1 line

HCI Event: Number of Completed Packets (0x13) plen 5

0000: 01 06 00 02 00 .....

Quoted 1 line

ACL data: handle 6 flags 0x02 dlen 8

    L2CAP(d): cid 0x0040 len 4 [psm 3]
      RFCOMM(s): UA: cr 1 dlci 0 pf 1 ilen 0 fcs 0xd7
Quoted 1 line

ACL data: handle 6 flags 0x02 dlen 12

    L2CAP(s): Disconn rsp: dcid 0x014b scid 0x0040

< HCI Command: Disconnect (0x01|0x0006) plen 3
0000: 06 00 13 ...

Quoted 1 line

HCI Event: Command Status (0x0f) plen 4

0000: 00 01 06 04 ....

Quoted 1 line

HCI Event: Disconn Complete (0x05) plen 4

Quoted 7 lines

0000: 00 06 00 16 ....

some idea?

bests

Luigi Genoni

- -------------------------------------------
Luca Pizzamiglio
CEFRIEL - Embedded Systems Design Unit
Via Fucini, 2 - 20133 MILANO (ITALY)
Phone: +39 02 23954 343
e-mail: [email protected]
ICQ: 5046978
- ------------------------------------------- -----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.2.7 (GNU/Linux)
Comment: Using GnuPG with Thunderbird - http://enigmail.mozdev.org

iD8DBQFDFwWOAoUy56ORfbERAj/ZAJ4zNjLVvvE17dmJk1pUB3prz303XwCffZ7R XeXes4R0LNSKJq+th8HLWZY=
=77k7
-----END PGP SIGNATURE-----

-------------------------------------------------------
SF.Net email is Sponsored by the Better Software Conference & EXPO September 19-22, 2005 * San Francisco, CA * Development Lifecycle Practices Agile & Plan-Driven Development * Managing Projects & Teams * Testing & QA Security * Process Improvement & Measurement * http://www.sqe.com/bsce5sf
_______________________________________________
Bluez-users mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/bluez-users