HTB and prio
Hi,
this is a followup to "Problem with HTB and ceil", the problem with the ceiling has been resolved, thanks to the memebers on this m/g.
Now I have the problem that packets get into the correct classe with the correct marks but the prios are not respected. I have 4 different classes:
1. voip class / prio 0 / mark 100 / voip traffic
2. ACK class / prio 1 / mark 200 / ACK packets to keep downloads as fast as possible
3. SSH class / prio 3 / mark 300 / ssh/scp interactive traffic
4. http/client class / prio 3 / mark 400 / traffic from the internal net/web browsing traffic
5. bulk classe / prio 4 / mark 500 / bulk traffic like p2p stuff etc, also locally from the router
All the minium settings are respected, same goes for ceiling. I would expect that after assuring that the guaranteed minimum bitrates have been assigned, that the excess bandwidth will first be given to the class with the highest prio until the ceiling has been reached, and if there is any bandwidth left, proceed with the class with the next lower prio. That doesnt happen, any excess b/w will be spread all across the classes/prios.
Now here is the script:
--------------------------------------------
#!/bin/bash
#
# Shell-Skript fuer Quality of Service mit HTB
#
EXTIF=ppp0
INTIF=eth0
if [ "$1" = "start" ]; then
############
# Outgoing
############
## Root/sbin/tc qdisc add dev $EXTIF root handle 1:0 htb default 400 ## Hauptklasse/sbin/tc class add dev $EXTIF parent 1:0 classid 1:1 htb rate 380kbit ceil 380kbit/sbin/tc class add dev $EXTIF parent 1:1 classid 1:2 htb rate 380kbit ceil 380kbit
## voip class/sbin/tc class add dev $EXTIF parent 1:2 classid 1:100 htb rate 32kbit ceil 96kbit prio 0
## non voip class/sbin/tc class add dev $EXTIF parent 1:2 classid 1:101 htb rate 248kbit ceil 380kbit
## ACK class/sbin/tc class add dev $EXTIF parent 1:101 classid 1:200 htb rate 200kbit ceil 380kbit prio 1
## VPN/SSH class/sbin/tc class add dev $EXTIF parent 1:101 classid 1:300 htb rate 16kbit ceil 380kbit prio 3
## http class/sbin/tc class add dev $EXTIF parent 1:101 classid 1:400 htb rate 16kbit ceil 380kbit prio 3
## bulk class/sbin/tc class add dev $EXTIF parent 1:101 classid 1:500 htb rate 16kbit ceil 380kbit prio 4
###################
# Marking
###################
# default marking *500 iptables -A POSTROUTING -t mangle -o $EXTIF -j MARK --set-mark 500
# voip *100 iptables -A POSTROUTING -t mangle -o $EXTIF -p udp --sport 5060:5061 -m length --length 0:45 -j MARK --set-mark 100 iptables -A POSTROUTING -t mangle -o $EXTIF -p udp -s 172.20.1.200 -j MARK --set-mark 100
# ACK+dns *200
iptables -A POSTROUTING -t mangle -o $EXTIF -p tcp -m tcp --tcp-flags SYN,RST,ACK ACK -j MARK --set-mark 200
iptables -A POSTROUTING -t mangle -o $EXTIF -p udp --sport 53 -j MARK --set-mark 200
iptables -A POSTROUTING -t mangle -o $EXTIF -p udp --dport 53 -j MARK --set-mark 200
# SSH *300
iptables -A POSTROUTING -t mangle -o $EXTIF -p tcp --dport 22 -j MARK --set-mark 300
iptables -A POSTROUTING -t mangle -o $EXTIF -p tcp --sport 22 -j MARK --set-mark 300
# http *400 iptables -A POSTROUTING -t mangle -o $EXTIF -p tcp --dport 80 -j MARK --set-mark 400 iptables -A POSTROUTING -t mangle -o $EXTIF -p tcp -s 172.20.1.0/24 -j MARK --set-mark 400
# bulk *500 iptables -A POSTROUTING -t mangle -o $EXTIF -p icmp -j MARK --set-mark 500
tc filter add dev $EXTIF parent 1:0 prio 0 protocol ip handle 1 fw flowid 1:1 tc filter add dev $EXTIF parent 1:0 prio 0 protocol ip handle 2 fw flowid 1:2 tc filter add dev $EXTIF parent 1:0 prio 0 protocol ip handle 100 fw flowid 1:100
tc filter add dev $EXTIF parent 1:0 prio 0 protocol ip handle 101 fw flowid 1:101
tc filter add dev $EXTIF parent 1:0 prio 0 protocol ip handle 200 fw flowid 1:200
tc filter add dev $EXTIF parent 1:0 prio 0 protocol ip handle 300 fw flowid 1:300
tc filter add dev $EXTIF parent 1:0 prio 0 protocol ip handle 400 fw flowid 1:400
tc filter add dev $EXTIF parent 1:0 prio 0 protocol ip handle 500 fw flowid 1:500
#######
# SFQ
#######
#tc qdisc add dev $EXTIF parent 1:2 handle 2: sfq perturb 10 tc qdisc add dev $EXTIF parent 1:100 handle 100: sfq perturb 10 #tc qdisc add dev $EXTIF parent 1:101 handle 101: sfq perturb 10 tc qdisc add dev $EXTIF parent 1:200 handle 200: sfq perturb 10 tc qdisc add dev $EXTIF parent 1:300 handle 300: sfq perturb 10 tc qdisc add dev $EXTIF parent 1:400 handle 400: sfq perturb 10 tc qdisc add dev $EXTIF parent 1:500 handle 500: sfq perturb 10
fi
--------------------------------------------
o root 1:0
|
+ 1:1
|
________________+ 1:2
/ |
| | 1:101 | __________+__________ | | | | | | | | | | | | | | | voip ACK SSH http bulk pr 0 pr 1 pr 2 pr 3 pr 4 1:100 1:200 1:300 1:300 1:400
Does anyone have a clue what I am doing wrong? (1:1 is not needed, I know, I wanted to attach another subtree to 1:1 which I havent done yet, thats why its still listed)
Any help is appreciated.
nik
_______________________________________________
LARTC mailing list
[email protected]
http://mailman.ds9a.nl/cgi-bin/mailman/listinfo/lartc
[LARTC] HTB and Prio
Hi ,
I wanted some clarification on the PRIO value of HTB. I have a parent class 1:1 with ceil and rate 1000Kbit. Further I have three classes
1. 1:2 with rate 500Kbit ceil 1000Kbit prio 1
2. 1:3 with rate 300Kbit ceil 1000Kbit prio 2
3. 1:4 with rate 200Kbit ceil 1000Kbit prio 3
Also there is a child class of 1:2 , 1:22, with rate 100Kbit ceil 1000Kbit prio 4.
I am not that among the siblings, the excess bandwidth is shared on basis of priority ie . 1:3 will get a higher share than 1:4. What I am not sure is will 1:22 class(being a child of 1:2) get a greater share than 1:3 or for that matter 1:4.
Thanks,
Vinod C
_______________________________________________
LARTC mailing list
[email protected]
http://mailman.ds9a.nl/cgi-bin/mailman/listinfo/lartc
Re: [LARTC] HTB and Prio
In reply to nik-da-39Quoted 2 lines
I am not that among the siblings, the excess
bandwidth > is shared on
Quoted 1 line
basis of priority ie . 1:3 will get a higher share
than > 1:4.
The quantum of borrowed bandwidth is proportional
with the rate you specified for each class.
The prio control is for controlling who gets the
excess bandwith first (if exists).
____________________________________________________
Start your day with Yahoo! - make it your home page
http://www.yahoo.com/r/hs
_______________________________________________
LARTC mailing list
[email protected]
http://mailman.ds9a.nl/cgi-bin/mailman/listinfo/lartc