Skip to contentSkip to conversation

conexant modem driver for 2.6.12

DISCUSSION Rafael Ávila de Espíndola 2 participants 4 messages Aug 24, 2005

lore
Share & tools
lore
#0 lore raw

I have ported the Conexant modem driver to the 2.6.12 kernel. The port is based on the lattest BSD/GPL version that I could find: 5.03.27.

To make the port easier, I have considered only the model that I have: the "HSF 56k HSFi Modem (rev 01)".

The port is still quite a mess, but it can be dowloaded from:
http://www.las.ic.unicamp.br/~espindola/modem.tar.bz2

Note that, since I don't know if I have permission to do so, this archive does not includes the binary files hsfbasic2.O and hsfengine.O. These files must be moved from a copy of the 5.03.27 driver.

If you have a modem that is not supported by this port, but works with 5.03.27, I would love to hear from you. I would also like to hear any comments you may have. Please keep in mind that there is a lot of cleaning to be done...

I hope that this will be usefull.
Rafael Ávila de Espíndola

#2 lore raw
Quoted 1 line · Christoph Hellwig

Please don't announce propitarty drivers on lkml, thanks.

Sorry, but my intent with this drivers is to make them as free as possible. I have ported the old driver because the only non-free files are the .Os . The new drivers distributed by linuxant have more restrictive licences. I would love to see the binary modules replace by, for example, the free modulator/demodulator implemented by Fabrice Bellard (1), but this is a much longer project.

Rafael

1:http://fabrice.bellard.free.fr/linmodem.html

#3 lore raw
Quoted 5 lines · Rafael Esp?ndola
Quoted 1 line · Christoph Hellwig

Please don't announce propitarty drivers on lkml, thanks.

Sorry, but my intent with this drivers is to make them as free as possible. I have ported the old driver because the only non-free files are the .Os

which is a binary driver. As I mentioned please stay away with that stuff. The only reason to post anything about it here was if you reverse-engineered their binary objects and were looking for someone to implement a driver based on the specification.