Oops with 2.6.13-rc6-mm2 and USB mouse
A message that is not in the archive (sent off-list or not yet received): [email protected]
Hi, Andrew.
I just tested the USB mouse with 2.6.13-rc6-mm2 and ACPI disabled (which, according to Linus, is one of the "usual suspects") and the problem still occurred.
On the other hand, with kernel 2.6.13-rc5-mm1 (which I am running now), I didn't have any problems plugging and unplugging the mouse. Here are the messages I get in dmesg (2.6.13-rc5-mm1) after I plug/unplug the mouse:
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - usb 1-1.2: new low speed USB device using uhci_hcd and address 4
input: USB HID v1.00 Mouse [USB Wheel Mouse] on usb-0000:00:04.2-1.2 usb 1-1.2: USB disconnect, address 4
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
Just thought you might like to know about this. If you want me to test any other version, please let me know.
Thanks, Rogério Brito.
Signature · 3 lines
Rogério Brito : [email protected] : http://www.ime.usp.br/~rbrito Homepage of the algorithms package : http://algorithms.berlios.de Homepage on freshmeat: http://freshmeat.net/projects/algorithms/
Quoted 5 lines · Rog???rio Brito
Hi, Andrew.
I just tested the USB mouse with 2.6.13-rc6-mm2 and ACPI disabled (which, according to Linus, is one of the "usual suspects") and the problem still occurred.
see here
http://marc.theaimsgroup.com/?l=linux-kernel&m=112481438512222&w=2
Reverting driver-core-fix-bus_rescan_devices-race.patch and applying the patch attached to the above message fixed the oops for me.
Signature · 2 lines
mattia :wq!
Quoted 7 lines · Mattia Dongili
Quoted 5 lines · Rog???rio Brito
Hi, Andrew.
I just tested the USB mouse with 2.6.13-rc6-mm2 and ACPI disabled (which, according to Linus, is one of the "usual suspects") and the problem still occurred.
Quoted 5 lines
see here
http://marc.theaimsgroup.com/?l=linux-kernel&m=112481438512222&w=2Reverting driver-core-fix-bus_rescan_devices-race.patch and applying the patch attached to the above message fixed the oops for me.
I my case removing a usb device or hub triggers an immediate reboot with mm2.
This is fixed removing the above patch. All is ok with mm1 too.
I tried the above process but the second patch does not apply.
Thanks
Ed Tomlinson
Quoted 12 lines · Rogério Brito
Hi, Andrew.
I just tested the USB mouse with 2.6.13-rc6-mm2 and ACPI disabled (which, according to Linus, is one of the "usual suspects") and the problem still occurred.
On the other hand, with kernel 2.6.13-rc5-mm1 (which I am running now), I didn't have any problems plugging and unplugging the mouse. Here are the messages I get in dmesg (2.6.13-rc5-mm1) after I plug/unplug the mouse:
Quoted 9 lines
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - usb 1-1.2: new low speed USB device using
uhci_hcdand address 4
input: USB HID v1.00 Mouse [USB Wheel Mouse] on usb-0000:00:04.2-1.2 usb 1-1.2: USB disconnect, address 4
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -Just thought you might like to know about this. If you want me to test any other version, please let me know.
Unfortunately there are 71 USB patches in 2.6.13-rc6-mm2 and I don't know which ones to suspect.
Hopefully Greg (when he returns) or one of the other USB developers can identify the buggy patch - we wouldn't want this leaking into Linus's kernel..
Quoted 19 lines · Andrew Morton
Quoted 18 lines · Rogério Brito
Hi, Andrew.
I just tested the USB mouse with 2.6.13-rc6-mm2 and ACPI disabled (which, according to Linus, is one of the "usual suspects") and the problem still occurred.
On the other hand, with kernel 2.6.13-rc5-mm1 (which I am running now), I didn't have any problems plugging and unplugging the mouse. Here are the messages I get in dmesg (2.6.13-rc5-mm1) after I plug/unplug the mouse:
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - usb 1-1.2: new low speed USB device using
uhci_hcdand address 4
input: USB HID v1.00 Mouse [USB Wheel Mouse] on usb-0000:00:04.2-1.2 usb 1-1.2: USB disconnect, address 4
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
Quoted 6 lines
Quoted 3 lines
Just thought you might like to know about this. If you want me to test any other version, please let me know.
Unfortunately there are 71 USB patches in 2.6.13-rc6-mm2 and I don't know which ones to suspect.
Really, what I mentioned[1] it my previous message fixes the very same issue with the usb device removal, see below the oops I had here. Not that I can't wait for Greg to come back but just to have a pointer for a possible fix :)
[1]: http://marc.theaimsgroup.com/?l=linux-kernel&m=112481438512222&w=2
usb 2-1: new low speed USB device using uhci_hcd and address 2
input: USB HID v1.10 Mouse [Logitech USB Mouse] on usb-0000:00:1d.1-1 usb 2-1: USB disconnect, address 2
BUG: atomic counter underflow at: [kref_put+89/160] kref_put+0x59/0xa0 [klist_dec_and_del+27/32] klist_dec_and_del+0x1b/0x20 [klist_release+0/80] klist_release+0x0/0x50 [klist_remove+33/80] klist_remove+0x21/0x50 [__device_release_driver+86/160] __device_release_driver+0x56/0xa0 [device_release_driver+28/48] device_release_driver+0x1c/0x30 [bus_remove_device+104/144] bus_remove_device+0x68/0x90 [device_del+49/112] device_del+0x31/0x70 [device_unregister+16/32] device_unregister+0x10/0x20 [pg0+273833078/1069683712] hub_port_connect_change+0x56/0x450 [usbcore] [pg0+273822726/1069683712] clear_port_feature+0x56/0x60 [usbcore] [pg0+273834837/1069683712] hub_events+0x2e5/0x490 [usbcore] [pg0+273835264/1069683712] hub_thread+0x0/0xe0 [usbcore] [pg0+273835285/1069683712] hub_thread+0x15/0xe0 [usbcore] [autoremove_wake_function+0/96] autoremove_wake_function+0x0/0x60 [kthread+182/192] kthread+0xb6/0xc0 [kthread+0/192] kthread+0x0/0xc0 [kernel_thread_helper+5/12] kernel_thread_helper+0x5/0xc Unable to handle kernel NULL pointer dereference at virtual address 00000000 printing eip: c02f1477 *pde = 00000000 Oops: 0002 [#1] PREEMPT last sysfs file: /class/usb_device/usbdev2.2/dev Modules linked in: nfsd exportfs lockd sunrpc ipt_MASQUERADE iptable_nat ipt_state ip_conntrack nfnetlink ip table_filter ip_tables e100 mii yenta_socket rsrc_nonstatic pcmcia_core sd_mod snd_intel8x0 snd_ac97_codec snd_ac97_bus snd_pcm_oss snd_mix er_oss snd_pcm snd_timer snd soundcore snd_page_alloc i2c_i801 i2c_core hw_random usb_storage scsi_mod reiser4 zlib_deflate zlib_inflate dm _mod rtc tun crc32 psmouse sonypi speedstep_ich speedstep_lib evdev pcspkr intel_agp agpgart usbhid uhci_hcd usbcore cpufreq_powersave CPU: 0 EIP: 0060:[wait_for_completion+103/256] Not tainted VLI EFLAGS: 00010046 (2.6.13-rc6-mm2-1)
EIP is at wait_for_completion+0x67/0x100
eax: cf6d449c ebx: cecf8000 ecx: cecf8000 edx: 00000000
esi: cf6d4498 edi: cecf9ec0 ebp: cecf9ed4 esp: cecf9eb4
ds: 007b es: 007b ss: 0068
Process khubd (pid: 1303, threadinfo=cecf8000 task=cecb0a90)
Stack: 00000001 cecb0a90 c0115e50 cf6d449c 00000000 cf6d44c4 cf6d4464 d0919a20
cf3c6800 c0251cc6 cf6d4488 c03178ec cf6d4464 cf3c6864 c13d1414 c0251d2c
cf6d4464 cf6d4464 c0251458 cf6d4464 cf6d4464 cf6d4464 c02503c1 cf6d4464
Call Trace:
[default_wake_function+0/32] default_wake_function+0x0/0x20
[__device_release_driver+86/160] __device_release_driver+0x56/0xa0
[device_release_driver+28/48] device_release_driver+0x1c/0x30
[bus_remove_device+104/144] bus_remove_device+0x68/0x90
[device_del+49/112] device_del+0x31/0x70
[device_unregister+16/32] device_unregister+0x10/0x20
[pg0+273833078/1069683712] hub_port_connect_change+0x56/0x450 [usbcore]
[pg0+273822726/1069683712] clear_port_feature+0x56/0x60 [usbcore]
[pg0+273834837/1069683712] hub_events+0x2e5/0x490 [usbcore]
[pg0+273835264/1069683712] hub_thread+0x0/0xe0 [usbcore]
[pg0+273835285/1069683712] hub_thread+0x15/0xe0 [usbcore]
[autoremove_wake_function+0/96] autoremove_wake_function+0x0/0x60
[kthread+182/192] kthread+0xb6/0xc0
[kthread+0/192] kthread+0x0/0xc0
[kernel_thread_helper+5/12] kernel_thread_helper+0x5/0xc
Code: ec 00 00 00 00 c7 45 f0 00 00 00 00 8b 01 c7 45 e8 50 5e 11 c0 c7 45 e0 01 00 00 00 89 45 e4 8d 46 04 8b 50 04 89 45 ec 89 78 04 <89> 3a 89 55 f0 8d 74 26 00 8b 03 c7 00 02 00 00 00 fb 8b 43 08
<3>BUG: khubd[1303] exited with nonzero preempt_count 1!Signature · 2 lines
mattia :wq!